aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2009-03-13[SCSI] iscsi tcp: bidi capablePete Wyckoff
Mark iscsi_tcp as being capable of bidirectional transfers. The bsg interface checks this bit before attempting any bidirectional commands. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] libiscsi: fix iscsi pool error pathJean Delvare
Memory freeing in iscsi_pool_free() looks wrong to me. Either q->pool can be NULL and this should be tested before dereferencing it, or it can't be NULL and it shouldn't be tested at all. As far as I can see, the only case where q->pool is NULL is on early error in iscsi_pool_init(). One possible way to fix the bug is thus to not call iscsi_pool_free() in this case (nothing needs to be freed anyway) and then we can get rid of the q->pool check. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] fcoe: fcoe fc crc offload indication by skb->ip_summedYi Zou
If LLD supports FCCRC offload, it should set ip_summed to be CHECKSUM_UNNECESSARY so we don't have to do CRC check again. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] fcoe: add support to FCoE offload support in fcoe_sw through net_deviceYi Zou
This adds implementation of ddp_setup()/ddp_done() in fcoe_sw for its fcoe_sw_libfc_fcn_templ. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] libfc: add support of large receive offload by ddp in fc_fcpYi Zou
When LLD supports direct data placement (ddp) for large receive of an scsi i/o coming into fc_fcp, we call into libfc_function_template's ddp_setup() to prepare for a ddp of large receive for this read I/O. When I/O is complete, we call the corresponding ddp_done() to get the length of data ddped as well as to let LLD do clean up. fc_fcp_ddp_setup()/fc_fcp_ddp_done() are added to setup and complete a ddped read I/O described by the given fc_fcp_pkt. They would call into corresponding ddp_setup/ddp_done implemented by the fcoe layer. Eventually, fcoe layer calls into LLD's ddp_setup/ddp_done provided through net_device Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] fcoe: add support to large send by gso through net_device for fcoe_swYi Zou
Change fcoe_xmit to setup gso for LLD LSO offload as well as CRC offload Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] libfc: use lso_max for sequence offloadYi Zou
Make sure for large send is supported by LLD in outgoing FCP data, we are only sending the lso_max a time in one single large send, since that is what supported by LLD. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] fcoe, libfc: check offload features from LLD through netdevYi Zou
This checks if net_devices supports FCoE offload ops in netdev_ops and it if it does, then sets up the corresponding flags in the associated fc_lport. For large send offload, the maximum length supported in one large send is now described by the added lso_max in fc_lport, which is setup initially from netdev->gso_max_size. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13[SCSI] net, fcoe: add ETH_P_FCOE for Fibre Channel over Ethernet (FCoE)Yi Zou
This adds eth type ETH_P_FCOE for Fibre Channel over Ethernet (FCoE), consequently, the ETH_P_FCOE from fc_fcoe.h and fcoe skb->protocol is not set as ETH_P_FCOE. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] scsi_dh_rdac: Retry mode select for NO_SENSE, ABORTED_COMMAND, ↵Chauhan, Vijay
UNIT_ATTENTION, NOT_READY(02/04/01) This patch is to add retry for mode select if mode select command is returned with sense NO_SENSE, UNIT_ATTENTION, ABORTED_COMMAND, NOT_READY(02/04/01). This patch reorganise the sense keys from if-else to switch-case format for better maintainability. Signed-off-by: Vijay Chauhan <vijay.chauhan@lsi.com> Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] fix /proc memory leak in the SCSI coreAlan Stern
The SCSI core calls scsi_proc_hostdir_add() from within scsi_host_alloc(), but the corresponding scsi_proc_hostdir_rm() routine is called from within scsi_remove_host(). As a result, if a host is allocated and then deallocated without ever being registered, the host's directory in /proc is leaked. This patch (as1181b) fixes this bug in the SCSI core by moving scsi_proc_hostdir_rm() into scsi_host_dev_release(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sym53c8xx: don't flood syslog with negotiation messagesTony Battersby
sym53c8xx prints a negotiation message after every check condition. This can add up to a lot of messages for removable-medium devices (CD-ROM, tape drives, etc.) that are being polled, since they return check condition when no medium is present. This patch suppresses the negotiation message if it would be the same as the last one printed. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sym53c8xx: use a queue depth of 1 for untagged devicesTony Battersby
sym53c8xx uses a command queue depth of 2 for untagged devices, without good reason. This _mostly_ seems to work ok, but it has caused me some subtle problems. For example, I have an application where one thread sends write commands to a tape drive, and another thread sends log sense polling commands. With a queue depth of 2, the polling commands end up being starved for long periods of time while multiple write commands are serviced (this may also be related to the fact the the sg driver queues commands in LIFO order). This problem is fixed by changing the queue depth to 1 for untagged devices. I have tested this change extensively with many different tape drives, medium changers, and disk drives (disk drives of course use tagged commands and are therefore unaffected by this patch). Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sym53c8xx: handle pci_iomap() failuresTony Battersby
sym_init_device() doesn't check if pci_iomap() fails. It also tries to map device RAM without first checking FE_RAM. 1) Move some initialization from sym_init_device() to the top of sym2_probe(). 2) Rename sym_init_device() to sym_iomap_device(). 3) Call sym_iomap_device() after sym_check_supported() instead of before so that device->chip.features will be set. 4) Check FE_RAM in sym_iomap_device() before mapping RAM. 5) If sym_iomap_device() cannot map registers, then abort. 6) If sym_iomap_device() cannot map RAM, then fall back to not using RAM and continue. 7) Remove the check for FE_RAM in sym_attach() since dev->ram_base is now always set correctly. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sym53c8xx: unmap pci memory after probe errorsTony Battersby
During sym2_probe(), sym_init_device() does pci_iomap(), but there is no corresponding pci_iounmap() if an error occurs before sym_attach() copies sym_device::s.{ioaddr,ramaddr} to np. 1) Add the sym_iounmap_device() function. 2) Call sym_iounmap_device() if an error occurs between sym_init_device() and the time sym_attach() allocates np. 3) Make sym_attach() copy sym_device::s.{ioaddr,ramaddr} to np before calling any function that can fail so that sym_free_resources() will do the unmap instead of sym_iounmap_device(). Also fixed by this patch: During sym2_probe(), if sym_check_raid() returns nonzero, then pci_release_regions() is never called. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sym53c8xx: fix bogus free_irq() on error pathTony Battersby
If sym_attach() gets an error at or before request_irq(), then sym_free_resources() will call free_irq() for an unregistered interrupt handler. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sym53c8xx: fix NULL deref on error pathTony Battersby
If sym_attach() fails to allocate np, the error path will dereference a NULL pointer for printk. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sym53c8xx: fix shost use-after-free and memory leakTony Battersby
This patch fixes two bugs: 1) rmmod sym53c8xx uses shost after freeing it with scsi_put_host(shost). 2) insmod sym53c8xx doesn't call scsi_put_host(shost) if scsi_add_host() fails, causing a memory leak on the error path. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] ipr: Expose debug and fastfail parametersWayne Boyer
Expose the debug and fastfail parameters to /sys/module/ipr/parameters such that they can be enabled/disabled at run time. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sd: tell the user when a disk's capacity is adjustedAlan Stern
This patch (as1188) combines the tests for decrementing a drive's reported capacity and expands the comment. It also adds an informational message to the system log, informing the user when the reported value has been changed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] ses: code_set == 1 is tested twiceRoel Kluin
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sg: remove the own list management for struct sg_fdFUJITA Tomonori
This replaces the own list management for struct sg_fd with the standard list_head structure. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sg: use ALIGN macroFUJITA Tomonori
This changes sg_build_indirect() to use ALIGN macro instead of calculating by hand. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sg: remove unnecessary function declarationsFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libfc: Correct use of ! and &Julia Lawall
!ep->esb_stat is either 1 or 0, and the rightmost bit of ESB_ST_COMPLETE is always 0, making the result of !ep->esb_stat & ESB_ST_COMPLETE always 0. Thus parentheses around the argument to ! seem needed. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ ( !E & !C | - !E & C + !(E & C) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: Fix NULL dereference BUG when target is not OSD conformantBoaz Harrosh
Very old OSC's Target had a BUG in the Get/Set attributes where it was looking in the wrong places for attribute lists length. If used with the open-osd initiator, the initiator would dereference a NULL pointer when retrieving system_information attributes. Checks are added that retrieval of each attribute is successful before accessing its value. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sg: avoid blk_put_request/blk_rq_unmap_user in interruptFUJITA Tomonori
This fixes the following oops: http://marc.info/?l=linux-kernel&m=123316111415677&w=2 You can reproduce this bug by interrupting a program before a sg response completes. This leads to the special sg state (the orphan state), then sg calls blk_put_request in interrupt (rq->end_io). The above bug report shows the recursive lock problem because sg calls blk_put_request in interrupt. We could call __blk_put_request here instead however we also need to handle blk_rq_unmap_user here, which can't be called in interrupt too. In the orphan state, we don't need to care about the data transfer (the program revoked the command) so adding 'just free the resource' mode to blk_rq_unmap_user is a possible option. I prefer to avoid complicating the blk mapping API when possible. I change the orphan state to call sg_finish_rem_req via execute_in_process_context. We hold sg_fd->kref so sg_fd doesn't go away until keventd_wq finishes our work. copy_from_user/to_user fails so blk_rq_unmap_user just frees the resource without the data transfer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] ibmvfc: Better handle other FC initiatorsBrian King
The ibmvfc driver currently always sets the role of all rports to FC_PORT_ROLE_FCP_TARGET, which is not correct for other initiators. This can cause problems if other initiators are on the fabric when we then try to scan the rport for LUNs. Fix this by looking at the service parameters returned in the PRLI to set the roles appropriately. Also look at the returned service parameters to decide whether or not we were actually able to successfully log into the target. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] scsi_dh_rdac: Retry for Quiescence in Progress in rdac device handlerChauhan, Vijay
During device discovery read capacity fails with 0x068b02 and sets the device size to 0. As a reason any I/O submitted to this path gets killed at sd_prep_fn with BLKPREP_KILL. This patch is to retry for 0x068b02 Signed-off-by: Vijay Chauhan <vijay.chauhan@lsi.com> Acked-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] ipr: add message to error tableWayne Boyer
Adds a message to the error table for an error that wasn't previously handled. In some cases the I/O Adapter will detect an error condition and mark a block as "logically bad". Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] scsi dh alua: handle report luns data changed in check sense calloutIlgu Hong
When we switch controllers the Intel Multi-Flex reports REPORTED_LUNS_DATA_HAS_CHANGED. This patch just has us retry the command. Signed-off-by: Ilgu Hong <ilgu.hong@promise.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] scsi dh alua: add intel Multi-Flex deviceIlgu Hong
This adds the Intel Multi-Flex device to scsi_dh_alua's scsi_dh_devlist, so the module attaches to these devs. Signed-off-by: Ilgu Hong <ilgu.hong@promise.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] scsi dh alua: fix group id maskingIlgu Hong
The buf[i] is a byte but we are only asking 4 bits off the group_id. This patch has us take off a byte. Signed-off-by: Ilgu Hong <ilgu.hong@promise.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] remove scsi_req_map_sgFUJITA Tomonori
No one uses scsi_execute_async with data transfer now. We can remove scsi_req_map_sg. Only scsi_eh_lock_door uses scsi_execute_async. scsi_eh_lock_door doesn't handle sense and the callback. So we can remove scsi_io_context too. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] osst: replace scsi_execute_async with the block layer APIFUJITA Tomonori
This replaces scsi_execute_async with the block layer API. st does the same thing so it might make sense to have something like libst (there are other things that os and osst can share). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Willem Riede <osst@riede.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] osst: make all the buffer the same sizeFUJITA Tomonori
This simiplifies the buffer management; all the buffers in osst_buffer become the same size. This is necessary to use the block layer API (sg driver was modified in the same way) since the block layer API takes the same size page frames instead of scatter gatter. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Willem Riede <osst@riede.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] scsi: Add osd library to build systemBoaz Harrosh
OSD in kernel source code is assumed to be at: drivers/scsi/osd/ with its own Makefile and Kconfig Add includes to them from drivers/scsi Makefile and Kconfig Add OSD to MAINTAINERS file Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] osd: Kconfig file for in-tree buildsBoaz Harrosh
Kconfig file for the drivers/scsi/osd subdirectory. Adds the following config items: config SCSI_OSD_INITIATOR config SCSI_OSD_ULD config SCSI_OSD_DPRINT_SENSE config SCSI_OSD_DEBUG Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: SCSI/OSD Sense decoding supportBoaz Harrosh
Implementation of the osd_req_decode_sense() API. Can be called by library users to decode what failed in command executions. Add SCSI_OSD_DPRINT_SENSE Kconfig variable. Possible values are: 0 - Do not print any errors to messages file <KERN_ERR> 1 - (Default) Print only decoded errors that are not recoverable. Recoverable errors are those that the target has complied with the request but with a warning. For example read passed end of object will return zeros after the last valid byte. 2- Print all errors. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: OSDv2 auto detectionBoaz Harrosh
Auto detect an OSDv2 or OSDv1 target at run time. Note how none of the OSD API calls change. The tests do not know what device version it is. This test now passes against both the IBM-OSD-SIM OSD1 target as well as OSC's OSD2 target. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: OSD version 2 SupportBoaz Harrosh
Add support for OSD2 at run time. It is now possible to run with both OSDv1 and OSDv2 targets at the same time. The actual detection should be preformed by the security manager, as the version is encoded in the capability structure. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: Not implemented commandsBoaz Harrosh
Some commands declared in header are not yet implemented. Put them as stubs in .c file, just so they take their place in the file Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: Add Flush and List-objects supportBoaz Harrosh
Add support for the various List-objects commands. List-partitions-in-device, List-collections-in-partition, List-objects-in-partition, List-objects-in-collection. All these support partial listing and continuation. Add support for the different Flush commands and options. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: OSD Security processing stubsBoaz Harrosh
Layout the signing of OSD's CDB and all-data security modes. The actual code for signing the data and CDB is missing, but the code flow and the extra buffer segments are all in place. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: attributes SupportBoaz Harrosh
Support for both List-Mode and Page-Mode osd attributes. One of these operations may be added to most other operations. Define the OSD standard's attribute pages constants and structures (osd_attributes.h) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] osd_uld: API for retrieving osd devices from KernelBoaz Harrosh
Kernel clients like exofs can retrieve struct osd_dev(s) by means of below API. + osduld_path_lookup() - given a path (e.g "/dev/osd0") locks and returns the corresponding struct osd_dev, which is then needed for subsequent libosd use. + osduld_put_device() - free up use of an osd_dev. Devices can be shared by multiple clients. The osd_uld_device's life time is governed by an embedded kref structure. The osd_uld_device holds an extra reference to both it's char-device and it's scsi_device, and will release these just before the final deallocation. There are three possible lock sources of the osd_uld_device 1. First and for most is the probe() function called by scsi-ml upon a successful login into a target. Released in release() when logout. 2. Second by user-mode file handles opened on the char-dev. 3. Third is here by Kernel users. All three locks must be removed before the osd_uld_device is freed. The MODULE has three lock sources as well: 1. scsi-ml at probe() time, removed after release(). (login/logout) 2. The user-mode file handles open/close. 3. Import symbols by client modules like exofs. TODO: This API is not enough for the pNFS-objects LD. A more versatile API will be needed. Proposed API could be: struct osd_dev *osduld_sysid_lookup(const char id[OSD_SYSTEMID_LEN]); Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] osd_uld: OSD scsi ULDBoaz Harrosh
Add a Linux driver module that registers as a SCSI ULD and probes for OSD type SCSI devices. When an OSD-type SCSI device is found a character device is created in the form of /dev/osdX - where X goes from 0 up to hard coded 64. The Major character device number used is 260. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] libosd: OSDv1 preliminary implementationBoaz Harrosh
Implementation of the most basic OSD functionality and infrastructure. Mainly Format, Create/Remove Partition, Create/Remove Object, and read/write. - Add Makefile and Kbuild to compile libosd.ko - osd_initiator.c Implementation file for osd_initiator.h and osd_sec.h APIs - osd_debug.h - Some kprintf macro definitions Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] add OSD_TYPEBoaz Harrosh
- Define the OSD_TYPE scsi device and let it show up in scans Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] sg: fix races with ioctl(SG_IO)Tony Battersby
sg_io_owned needs to be set before the command is sent to the midlevel; otherwise, a quickly-completing command may cause a different CPU to see "srp->done == 1 && !srp->sg_io_owned", which would lead to incorrect behavior. Check srp->done and set srp->orphan while holding rq_list_lock to prevent races with sg_rq_end_io(). There is no need to check sfp->closed from read/write/ioctl/poll/etc. since the kernel guarantees that this won't happen. The usefulness of sg_srp_done() was questionable before; now it is definitely not needed. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>