aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2005-06-09[PATCH] sata_svw: bump version numberNarendra Sankar
Bump sata_svw.c version number to indicate support for BCM5785(HT1000) Southbridge SATA controller. Signed-off-by: Narendra Sankar <nsankar@broadcom.com> diff -uNr linux-2.6.12-rc5/drivers/scsi/sata_svw.c linux-2.6.12-rc5.brcm/drivers/scsi/sata_svw.c
2005-06-09[PATCH] sata_sil: Fix FIFO PCI Bus Arbitration kernel oopsJens Axboe
Correct this. diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
2005-06-04[libata] ahci: finish ATAPI support (hopefully)Jeff Garzik
2005-06-04Merge of /spare/repo/libata-dev branch bridge-detect
2005-06-04Automatic merge of /spare/repo/libata-dev branch svw
2005-06-04Merge of /spare/repo/libata-dev branch pdc20619
2005-06-04Automatic merge of /spare/repo/libata-dev branch ahci-msi
2005-06-04[libata] ahci: minor PCI MSI cleanupJeff Garzik
Replace 'have_msi' variable with a bit in the existing 'flags' variable,. AHCI_FLAG_MSI.
2005-06-04Automatic merge of /spare/repo/linux-2.6/.git branch HEAD
2005-06-03Automatic merge of /spare/repo/linux-2.6/.git branch HEAD
2005-06-03[SCSI] 2.6 aacraid: updated sysfs filesMark Haverkamp
This patch adds some files into the /sys/class/scsi_host/hostN directories for aacraid adapters: model vendor hba_kernel_version hba_monitor_version hba_bios_version serial_number Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03[SCSI] update spi transport class so that u320 Domain Validation worksJames Bottomley
There are several extra things that have to be considered when running Domain Validation on a u320 target (notably how you fall back). Hopefully this should help us when someone adds this transport class to aic79xx. I've tested this on the lsi1030, so I know it works correctly up to u320. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03[SCSI] fix aic7xxx coupled parameter problemJames Bottomley
For setting coupled parameters, we need to be comparing against the goal settings, not the current ones. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03[SCSI] sg: Command completion after remove oopsbrking@us.ibm.com
A problem exists todayin the sg driver that if an SG_IO request is outstanding to a device when it is removed from the system. The system may oops if that command completes later in time. 1. sg_remove gets called 2. sg_remove calls sg_finish_req_req on all pending requests This removes the Sg_request's from the headrp list in the Sg_fd 3. The sleeping SG_IO ioctl is woken. It does nothing and returns. 4. The caller closes the fd, which invokes sg_release 5. sg_release calls sg_remove_sfp. It finds no outstanding commands since the headrp list is empty, so it calls __sg_remove_sfp, which frees the sfp. 6. Now when sg_cmd_done gets called, sg uses upper_private_data in the Scsi_Request, which should point to the srp, which has been freed, so it points to freed memory. 7. sg then dereferences the srp pointer to get the sfp, and we oops. The fix is to NULL out the upper_private_data field in this path, which sg_cmd_done already checks for, which will prevent the oops from occurring. cpu 0x1: Vector: 300 (Data Access) at [c00000000fff7aa0] pc: d0000000002bbea8: .sg_cmd_done+0x70/0x394 [sg] lr: d000000000073304: .scsi_finish_command+0x10c/0x130 [scsi_mod] sp: c00000000fff7d20 msr: 8000000000009032 dar: 2f70726f63202f78 dsisr: 40000000 current = 0xc0000000024589b0 paca = 0xc0000000003da800 pid = 7, comm = events/1 [c00000000fff7dc0] d000000000073304 .scsi_finish_command+0x10c/0x130 [scsi_mod] [c00000000fff7e50] d00000000007317c .scsi_softirq+0x140/0x168 [scsi_mod] [c00000000fff7ef0] c0000000000634dc .__do_softirq+0xa0/0x17c [c00000000fff7f90] c000000000018430 .call_do_softirq+0x14/0x24 [c00000000ed472e0] c0000000000142e0 .do_softirq+0x74/0x9c [c00000000ed47370] c000000000013c9c .do_IRQ+0xe8/0x100 [c00000000ed473f0] c00000000000ae34 HardwareInterrupt_entry+0x8/0x54 c00000000003df28 .smp_call_function+0 x100/0x1d0 [c00000000ed47780] c0000000000ba99c .invalidate_bh_lrus+0x30/0x70 [c00000000ed47810] c0000000000b91a0 .invalidate_bdev+0x18/0x3c [c00000000ed478a0] c0000000000da7b8 .__invalidate_device+0x70/0x94 [c00000000ed47930] c0000000001d40bc .invalidate_partition+0x4c/0x7c [c00000000ed479c0] c00000000010a944 .del_gendisk+0x48/0x15c [c00000000ed47a50] d00000000003d55c .sd_remove+0x34/0xe4 [sd_mod] [c00000000ed47ae0] c0000000001c5d30 .device_release_driver+0x90/0xb4 [c00000000ed47b70] c0000000001c6130 .bus_remove_device+0xb0/0x12c [c00000000ed47c00] c0000000001c4378 .device_del+0x120/0x198 [c00000000ed47ca0] d00000000007dcdc .scsi_remove_device+0xb4/0x194 [scsi_mod] [c00000000ed47d30] d0000000000a5864 .ipr_worker_thread+0x1d4/0x27c [ipr] [c00000000ed47dd0] c0000000000734c4 .worker_thread+0x238/0x2f4 [c00000000ed47ee0] c0000000000796c0 .kthread+0xcc/0x11c [c00000000ed47f90] c000000000018ad0 .kernel_thread+0x4c/0x6c Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03Automatic merge of rsync://www.parisc-linux.org/~jejb/git/scsi-for-linus-2.6Linus Torvalds
2005-06-03[SCSI] fix slab corruption during ipr probeNathan Lynch
With CONFIG_DEBUG_SLAB=y I see slab corruption messages during boot on pSeries machines with IPR adapters with any 2.6.12-rc kernel. The change which seems to have introduced the problem is "SCSI: revamp target scanning routines" and may be found at: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111093946426333&w=2 In order to revert that in a 2.6.12-rc1 tree, I had to revert "target code updates to support scanned targets" first: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111094132524649&w=2 With both patches reverted, the corruption messages go away. ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21, 2005) ipr 0001:d0:01.0: Found IOA with IRQ: 167 ipr 0001:d0:01.0: Starting IOA initialization sequence. ipr 0001:d0:01.0: Adapter firmware version: 020A005C ipr 0001:d0:01.0: IOA initialized. scsi0 : IBM 570B Storage Adapter Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770 Type: Enclosure ANSI SCSI revision: 02 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770 Type: Enclosure ANSI SCSI revision: 02 Slab corruption: start=c0000001e8de5268, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50) 080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a Prev obj: start=c0000001e8de5050, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<0000000000000000>](0x0) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Next obj: start=c0000001e8de5480, len=512 Redzone: 0x170fc2a5/0x170fc2a5. Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228) 000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00 010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98 Slab corruption: start=c0000001e8de5268, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50) 080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a Prev obj: start=c0000001e8de5050, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<0000000000000000>](0x0) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Next obj: start=c0000001e8de5480, len=512 Redzone: 0x170fc2a5/0x170fc2a5. Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228) 000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00 010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98 ... I did some digging and the problem seems to be a refcounting issue in __scsi_add_device. The target gets freed in scsi_target_reap, and then __scsi_add_device tries to do another device_put on it. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03[SCSI] qla2xxx: fix bad locking during eh_abortAndrew Vasquez
Correct incorrect locking order in qla2xxx_eh_abort() handler which would case a hang during certain code-paths. With extra pieces to fix the irq state in the locks. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-02Automatic merge of /spare/repo/linux-2.6/.git branch HEAD
2005-06-02libata: kernel-doc warning fixesJeff Garzik
2005-06-02libata: update inline source docsEdward Falk
2005-05-31[libata] ahci: Update for recent ->host_stop() API changeJeff Garzik
2005-05-31Automatic merge of ↵
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git branch HEAD
2005-05-30libata: doc updatesJeff Garzik
2005-05-30libata: more doc updatesJeff Garzik
Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c.
2005-05-29Automatic merge of 'misc-fixes' branch fromLinus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-05-29libata: bump versionJeff Garzik
2005-05-29Automatic merge of /spare/repo/netdev-2.6 branch use-after-unmap
2005-05-28[PATCH] swsusp: ahd_dv_0 can't be stoppedShaohua Li
This driver wants to set PF_NOFREEZE. Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-27[PATCH] drivers/scsi/ahci: add #include req'd for the DMA_{64,32}BIT_MASK ↵domen@coderock.org
constants The previous patch did not compile cleanly on all architectures so here's a fixed one which #includes <linux/dma-mapping.h>. Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> diff -puN drivers/scsi/ahci.c~dma_mask-drivers_scsi_ahci drivers/scsi/ahci.c
2005-05-27[PATCH] drivers/scsi/sata_vsc: add #include req'd for DMA_32BIT_MASK constantdomen@coderock.org
The previous patch did not compile cleanly on all architectures so here's a fixed one which #includes <linux/dma-mapping.h>. Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> diff -puN drivers/scsi/sata_vsc.c~dma_mask-drivers_scsi_sata_vsc drivers/scsi/sata_vsc.c
2005-05-26libata: Fix use-after-iounmapJeff Garzik
Jens Axboe pointed out that the iounmap() call in libata was occurring too early, and some drivers (ahci, probably others) were using ioremap'd memory after it had been unmapped. The patch should address that problem by way of improving the libata driver API: * move ->host_stop() call after all ->port_stop() calls have occurred. * create default helper function ata_host_stop(), and move iounmap() call there. * add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark). sata_qstor appears to require the host-stop-before-port-stop ordering that existed prior to applying the attached patch.
2005-05-26[SCSI] aic7xxx: remove separate target and device allocationsJames Bottomley
Since the aic driver is now taught to speak in terms of the generic linux devices, we can now also dispense with the transport class get routines (since we update the parameters when the driver sees they change) and also plumb it into the spi transport transfer agreement reporting infrastructure. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26Automatic merge of ../scsi-misc-2.6-old/James Bottomley
2005-05-26Automatic merge of ↵
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git branch HEAD
2005-05-26Merge of 'misc-fixes' branch fromLinus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-05-26[SCSI] Add target alloc/destroy callbacks to the host templateJames Bottomley
This gives the HBA driver notice when a target is created and destroyed to allow it to manage its own target based allocations accordingly. This is a much reduced verson of the original patch sent in by James.Smart@Emulex.com Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26[SCSI] TYPE_RBC cache fixes (sbp2.c affected)Al Viro
a) TYPE_SDAD renamed to TYPE_RBC and taken to scsi.h b) in sbp2.c remapping of TYPE_RPB to TYPE_DISK turned off c) relevant places in midlayer and sd.c taught to accept TYPE_RBC d) sd.c::sd_read_cache_type() looks into page 6 when dealing with TYPE_RBC - these guys have writeback cache flag there and are not guaranteed to have page 8 at all. e) sd_read_cache_type() got an extra sanity check - it checks that it got the page it asked for before using its contents. And screams if mismatch had happened. Rationale: there are broken devices out there that are "helpful" enough to go for "I don't have a page you've asked for, here, have another one". For example, PL3507 had been caught doing just that... f) sbp2 sets sdev->use_10_for_rw and sdev->use_10_for_ms instead of bothering to remap READ6/WRITE6/MOD_SENSE, so most of the conversions in there are gone now. Incidentally, I wonder if USB storage devices that have no mode page 8 are simply RBC ones. I haven't touched that, but it might be interesting to check... Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26[SCSI] sym2 version 2.2.1Matthew Wilcox
sym2 version 2.2.1: - Fix MMIO BAR detection (Thanks to Bob Picco) - Fix odd-sized transfers with a wide bus (Thanks to Larry Stephens) - Write posting fixes (Thanks to Thibaut Varene) - Change one of the GFP_KERNEL allocations back into a GFP_ATOMIC - Make CCB_BA() return a script-endian address - Move range checks and disabling of devices from the queuecommand path to slave_alloc() - Remove a warning in sym_setup_cdb() - Keep a pointer to the scsi_target instead of the scsi_dev in the tcb - Remove a check for the upper layers passing an oversized cmd - Replace CAM_REQ_ constants with the Linux DID_ constants - Replace CAM_DIR_ constants with the Linux DMA_ constants - Inline sym_read_parisc_pdc() on non-parisc systems Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26[PATCH] ide-scsi: kmap scatter/gather before doing PIO Stuart Hayes
From: Stuart Hayes <Stuart_Hayes@dell.com> The system can panic with a null pointer dereference using ide-scsi if PIO is being done on scatter gather pages that are in high memory, because page_address() returns 0. We are actually seeing this using a tape drive. This patch will kmap_atomic() the pages before performing PIO. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-05-26[PATCH] convert IDE device drivers to driver-modelBartlomiej Zolnierkiewicz
* add ide_bus_match() and export ide_bus_type * split ide_remove_driver_from_hwgroup() out of ide_unregister() * move device cleanup from ide_unregister() to drive_release_dev() * convert ide_driver_t->name to driver->name * convert ide_driver_t->{attach,cleanup} to driver->{probe,remove} * remove ide_driver_t->busy as ide_bus_type->subsys.rwsem protects against concurrent ->{probe,remove} calls * make ide_{un}register_driver() void as it cannot fail now * use driver_{un}register() directly, remove ide_{un}register_driver() * use device_register() instead of ata_attach(), remove ata_attach() * add proc_print_driver() and ide_drivers_show(), remove ide_drivers_op * fix ide_replace_subdriver() and move it to ide-proc.c * remove ide_driver_t->drives, ide_drives and drives_lock * remove ide_driver_t->drivers, drivers and drivers_lock * remove ide_drive_t->driver and DRIVER() macro Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-05-26[PATCH] libata: Fix zero sg_dma_len() on 64-bit platformAlbert Lee
When testing ATAPI PIO data transfer on the ppc64 platform, __atapi_pio_bytes() got zero when sg_dma_len() is used. I checked the <asm-ppc64/scatterlish.h>, the struct scatterlist is defined as: struct scatterlist { struct page *page; unsigned int offset; unsigned int length; /* For TCE support */ u32 dma_address; u32 dma_length; }; #define sg_dma_address(sg) ((sg)->dma_address) #define sg_dma_len(sg) ((sg)->dma_length) So, if the scatterlist is not DMA mapped, sg_dma_len() will return zero on ppc64. The same problem should occur on the x86-64 platform. On the i386 platform, sg_dma_len() returns sg->length, that's why the problem does not occur on an i386. Changes: - Use sg->length if the scatterlist is not DMA mapped (yet). Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
2005-05-25[PATCH] sata_svw: Add support for new device IDsNarendra Sankar
BCM5785 (HT1000) is a new southbridge from Serverworks/Broadcom that incorporates 4 SATA ports in a single PCIX function. Functionally these ports are similar to that in older devices like the Apple K2 and the Frodo4/8. This patch adds support for the new PCI device ID along with a blurb on what the various device IDs mean. Additionally in all devices based on this SATA controller, the SATA ports appear as a single PCI function. This is true for older Frodo8 devices as well. Hence the init function should init all the ports present in the detected controller (which could be 4 or 8). Signed-off-by: Narendra Sankar <nsankar@broadcom.com>
2005-05-25[PATCH] sata_promise: add PCI ID for FastTrak TX2200 2-portsFrancisco Javier
2005-05-25[PATCH] sata_sil: new ID 1002:437A for ATI IXP400NAKAMURA Kenta
2005-05-24[PATCH] aic7xxx_osm build fixAndrew Morton
Fix a c99ism. Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-20Automatic merge of rsync://www.parisc-linux.org/~jejb/git/scsi-for-linus-2.6.gitLinus Torvalds
2005-05-20[SCSI] aic7xxx: fix U160 modeJames Bottomley
The new period/dt setting routines don't get the coupling of these parameters correct. This means that Domain Validation never gets DT set, and thus the drive gets restricted to U80. Fix this by restoring the couplings in the set routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] aic7xxx: add back lockingJames Bottomley
Tampering with the settings has to be done under the host lock ... slave_alloc isn't called under any lock, so this has to be done explicitly. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] aic7xxx: make correct use of slave_alloc/destroy and remove the per ↵James Bottomley
device timer The allocation of all of our components should be done in slave alloc. Currently it's rather fancifully refcounted in the queuecommand callback. This patch moves allocation and destroy to their correct places in slave_alloc/slave_destory. Now we can guarantee that everywhere a device is requested, it's actually been allocated, so don't check for this anymore. Additionally, the per device busy timer was the only source of potential use after free. It's been deleted because Linux does the correct thing with busy returns, so there's no need to implement a separate timer in the driver. Finally, implement code that forces all the device parameters to zero (i.e. async and narrow) in the slave alloc, inform the spi class of the bios recorded maximums and wait until slave configure before trying anything more adventurous. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] aic7xxx: remove the completeqJames Bottomley
This should finish the spurious queue removal from aic7xxx (there are other queues that are probably unnecessary, but at least the major and obviously unnecessary ones are done with). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-22 12:58:40 +0000