aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2006-10-01[PATCH] completions: lockdep annotate on stack completionsPeter Zijlstra
All on stack DECLARE_COMPLETIONs should be replaced by: DECLARE_COMPLETION_ONSTACK Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] Generic booleanRichard Knutsson
This patch defines: * a generic boolean-type, named 'bool' * aliases to 0 and 1, named 'false' and 'true' Removing colliding definitions of 'bool', 'false' and 'true'. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30[PATCH] SCSI: fix request flag-related build breakageJeff Garzik
The ->flags in struct request was split into two variables, in a recent changeset. The merge of this change forgot to update SCSI's libsas, probably because libsas was a very recent merge. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30[PATCH] BLOCK: Make it possible to disable the block layer [try #6]David Howells
Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30[PATCH] SCSI: scsi_done_q is unusedJens Axboe
It is a leftover from before the softirq completion was migrated to the block layer. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30[PATCH] Remove ->rq_status from struct requestJens Axboe
After Christophs SCSI change, the only usage left is RQ_ACTIVE and RQ_INACTIVE. The block layer sets RQ_INACTIVE right before freeing the request, so any check for RQ_INACTIVE in a driver is a bug and indicates use-after-free. So kill/clean the remaining users, straight forward. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30[PATCH] Split struct request ->flags into two partsJens Axboe
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-27[PATCH] EISA bus MODALIAS attributes supportMichael Tokarev
Add modalias attribute support for the almost forgotten now EISA bus and (at least some) EISA-aware modules. The modalias entry looks like (for an 3c509 NIC): eisa:sTCM5093 and the in-module alias like: eisa:sTCM5093* The patch moves struct eisa_device_id declaration from include/linux/eisa.h to include/linux/mod_devicetable.h (so that the former now #includes the latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE declared), and adds recognision of __mod_eisa_device_table to scripts/mod/file2alias.c so that proper modules.alias will be generated. There's no support for /lib/modules/$kver/modules.eisamap, as it's not used by any existing tools, and because with in-kernel modalias mechanism those maps are obsolete anyway. The rationale for this patch is: a) to make EISA bus to act as other busses with modalias support, to unify driver loading b) to foget about EISA finally - with this patch, kernel (who still supports EISA) will be the only one who knows how to choose the necessary drivers for this bus ;) [akpm@osdl.org: fix the kbuild bit] Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org> Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-25fix broken/dubious driver suspend() methodsDavid Brownell
Small driver suspend() fixes in preparation for the PRETHAW events: - Only compare message events for equality against PM_EVENT_* codes; not against integers, or using greater/less-than comparisons. (PM_EVENT_* should really become a __bitwise thing.) - Explicitly test for SUSPEND events (rather than not-something-else) before suspending devices. - Removes more of the confusion between a pm_message_t (wraps event code) and a "state" ... suspend() originally took a target system state. These updates are correct and appropriate even without new PM_EVENT codes. benh: "I think in the Mesh case, we should handle the freeze case as well or we might get wild DMA." Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Greg KH <greg@kroah.com> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-24[PATCH] fix idiocy in asd_init_lseq_mdp()Al Viro
To whoever had written that code: a) priority of >> is higher than that of & b) priority of typecast is higher than that of any binary operator c) learn the fscking C Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[PATCH] SCSI gfp_t annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[PATCH] Revert ABI-breaking change in /procMatthew Wilcox
Some user tools parse /proc/scsi/scsi, so we can't yet change the names. Change the existing ones back to their old names, and add an admonition to not make the same mistake that I did. Andrew Morton reports that this was breaking YDL 4.1 userspace. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[PATCH] missing include (free_irq() use)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24Merge branch 'master' into upstreamJeff Garzik
2006-09-23[SCSI] scsi_transport_fc: fixup netlink argumentsJames Bottomley
nlmsg_multicast now takes an extra allocation flag, so add it to the use in the fibre channel transport class. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] SPI transport class: misc DV fixesJames Bottomley
Key more of the domain validation settings off the inquiry data from the disk (in particular, don't try IU or DT unless the disk claims to support them. Also add a new dv_in_progress flag to prevent recursive DV. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] Switch some more scsi drivers to pci_get_device and refcounted pci ↵Alan Cox
structures Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] eata_pio cleanup and PCI fixAlan Cox
This started as a PCI reference fixup but to do that I need to build it, to build it I need to fix it and its full of 32bitisms and uglies. It has been resurrected, I'm not sure if this is a thank you for the work on the license stuff or punishment for some unknown misdeed however 8). I've also fixed a memory scribble in the init code. One oddity - the changes from HZ * to constants are deliberate. Whoever originally wrote the code (or cleaned it up) used HZ for a cycle timing loop even though is not HZ related. I've put it back to the counts used in the old days when the driver was most used. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aacraid: remove scsi_remove_deviceMark Haverkamp
Received from Mark Salyzyn: Until the system is stabilized, I am suggesting the enclosed modification to prevent the driver from tickling the panic. Once sysfs and friends are stabilized, the patch may be backed out. We have yet to evaluate if we really want to relinquish existing Scsi Devices in any case, holding on to them as configuration of arrays comes and goes makes some sense as well. As a result, we have opted to pull the lines rather than comment them in legacy. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aacraid: merge rx and rkt codeMark Haverkamp
Received from Mark Salyzyn: The only real difference between the rkt and rx platform modules is the offset of the message registers. This patch recognizes this similarity and simplifies the driver to reduce it's code footprint and to improve maintainability by reducing the code duplication. Visibly, the 'rkt.c' portion of this patch looks more complicated than it really is. View it as retaining the rkt-only specifics of the interface. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aacraid: expose physical devicesMark Haverkamp
Received from Mark Salyzyn: I am placing this functionality into an insmod parameter. Normally the physical components are exported to sg, and are blocked from showing up in sd. Note that the pass-through I/O path via the driver through the Firmware to the physical disks is not an optimized path, the card is designed for Hardware RAID, elevator sorting and caching. This should not be used as a means for utilizing the aacraid based controllers as a generic scsi/SATA/SAS controller, performance should suck by a few percentage points, any RAID meta-data on the drives will confuse the controller about who owns the drives and there is a high risk of destroying content in both directions. Unreliable and for experimentation or strange controlled circumstances only. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aacraid: misc cleanupMark Haverkamp
Received from Mark Salyzyn: Basically cleanup, nothing here will have an affect. Adjusting some error codes, removing superfluous definitions and code fragments. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic7xxx: pause sequencer before touching SBLKCTLDoug Ledford
Some cards need to pause the sequencer before the SBLKCTL register is touched. This fixes a PCI related oops seen on powerpc macs with this card caused by trying to ascertain the bus signalling before beginning domain validation. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic7xxx: avoid checking SBLKCTL register for certain cardsJames Bottomley
For cards that don't support LVD, checking the SBLKCTL register to determine the bus singalling doesn't work. So, check that the card supports LVD first (AHC_ULTRA2) before checking the register. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] scsi_debug version 1.80Douglas Gilbert
See http://www.torque.net/sg/sdebug26.html for more information on the scsi_debug driver. ChangeLog: - add 'vpd_use_hostno' parameter to allow simulated hosts to see the same set of targets (and luns). For testing multipath software. - add 'fake_rw' parameter to ignore the data in READ and WRITE commands - add support for log subpages (new in SPC-4) - yield appropriate block descriptor for MODE SENSE commands (only for pdt=0 (i.e. disks)) - REQUEST SENSE response no longer shows the stopped power condition (SAT changed to agree with SPC-3) Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23Merge mulgrave-w:git/scsi-misc-2.6James Bottomley
Conflicts: drivers/scsi/iscsi_tcp.c drivers/scsi/iscsi_tcp.h Pretty horrible merge between crypto hash consolidation and crypto_digest_...->crypto_hash_... conversion Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] megaraid: Make megaraid_ioctl() check copy_to_user() return valueJesper Juhl
Check copy_to_user() return value in drivers/scsi/megaraid.c::megadev_ioctl() This gets rid of this little warning: drivers/scsi/megaraid.c:3661: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: "Ju, Seokmann" <Seokmann.Ju@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aha152x: remove static host arrayJames Bottomley
Fix this driver not to use a static two element host array instead use a list. This should fix panic on multiple eject reinsert of the pcmcia version of this device. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic94xx: Fix for a typo in aic94xx_init()malahal@us.ibm.com
Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic94xx: Removes Reliance on FLASH Manufacture IDsAlexis Bruemmer
This patch removes the reliance on FLASH Manufacture IDs for validation. Signed-off-by: Alexis Bruemmer <alexisb@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (64 commits) [BLOCK] dm-crypt: trivial comment improvements [CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available [CRYPTO] padlock: Convert padlock-sha to use crypto_hash [CRYPTO] users: Use crypto_comp and crypto_has_* [CRYPTO] api: Add crypto_comp and crypto_has_* [CRYPTO] users: Use crypto_hash interface instead of crypto_digest [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest [CRYPTO] digest: Remove old HMAC implementation [CRYPTO] doc: Update documentation for hash and me [SCTP]: Use HMAC template and hash interface [IPSEC]: Use HMAC template and hash interface [CRYPTO] tcrypt: Use HMAC template and hash interface [CRYPTO] hmac: Add crypto template implementation [CRYPTO] digest: Added user API for new hash type [CRYPTO] api: Mark parts of cipher interface as deprecated [PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument [CRYPTO] drivers: Remove obsolete block cipher operations [CRYPTO] users: Use block ciphers where applicable [SUNRPC] GSS: Use block ciphers where applicable [IPSEC] ESP: Use block ciphers where applicable ...
2006-09-21[SCSI] iscsi: Use crypto_hash interface instead of crypto_digestHerbert Xu
This patch converts ISCSI to use the new crypto_hash interface instead of crypto_digest. It's a fairly straightforward substitution. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-19Merge branch 'master' into upstreamJeff Garzik
2006-09-14Merge branch 'linux-2.6'Paul Mackerras
2006-09-13[PATCH] SCSI: lockdep annotation in scsi_send_eh_cmndStefan Richter
Fixup for lockdep enabled kernels: Annotate an on-stack completion. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13[PATCH] libata: ignore CFA signature while sanity-checking an ATAPI deviceTejun Heo
0x848a in ID word 0 indicates CFA device iff the ID data is obtained from IDENTIFY DEVICE. For ATAPI devices, 0x848a in ID work 0 indicates valid ATAPI device. Fix sanity check in ata_dev_read_id() such that ATAPI devices reporting 0x848a in ID word 0 is not handled as error. The problem is identified by J.A. Magallon with HL-DT-ST DVDRAM GSA-4120B. Signed-off-by: Tejun Helo <htejun@gmail.com> Cc: J.A. Magallon <jamagallon@ono.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-12[SCSI] wd33c93: Scsi_Cmnd convertionHenrik Kretzschmar
Changes obsolete typedef'd Scsi_Cmnd to struct scsi_cmnd. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-12[SCSI] fix compile error on module_refcountDaniel Walker
LD .tmp_vmlinux1 drivers/built-in.o(.text+0x8e1f9): In function `scsi_device_put': drivers/scsi/scsi.c:887: undefined reference to `module_refcount' make: *** [.tmp_vmlinux1] Error 1 There are only two users of module_refcount() outside of kernel/module.c and the other one uses ifdef's similar to this. Signed-Off-By: Daniel Walker <dwalker@mvista.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-11Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ata_piix: add map 01b for ICH7M [libata] sata_mv: errata check buglet fix
2006-09-11[PATCH] Fix 2.6.18-rc6 IDE breakage, add missing ident needed for current ↵Alan Cox
VIA boards There are two changes here. The first reverses the broken PCI_DEVICE conversion back to the old format. The second adds a missing PCI ID so you can actually boot 2.6.18 on 2 month old VIA motherboards (right now only 2.6.18-mm works). CC'd to Jeff to check the PCI ident but its a) in several distro kernels and b) in 2.6.18-mm [twice ??] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-11[PATCH] ata_piix: add map 01b for ICH7MTejun Heo
Although the document says otherwise, some ich7m uses map 01b. This patch adds separate map DB for ICH7M and adds map entry for 01b. This was spotted on an ASUS laptop by Jonathan Dieter. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jonathan Dieter <jdieter@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[libata] sata_mv: errata check buglet fixAndres Salomon
Fix a buglet; the errata check below this code is assuming the value in the sstatus variable is what was pulled out of the SCR_STATUS register. However, the status checks in the timeout loop clobber everything but the first 4 bits of sstatus, so the errata checks are invalid. This patch changes it to not clobber SStatus. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-07[SCSI] fix up SCSI netlink buildJames Bottomley
CONFIG_SCSI_NETLINK can become a bool since the item its selecting (CONFIG_NET) cannot be a module. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] aci94xx: implement link rate settingJames Bottomley
This patch implements the ability to set the minimum and maximum linkrates for both libsas (for expanders) and aic94xx (for the host phys). It also tidies up the setting of the hardware min and max to make sure they're updated when the expander emits a change broadcast. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] scsi_transport_sas: make minimum and maximum linkrate settable quantitiesJames Bottomley
According to SPEC, the minimum_linkrate and maximum_linkrate should be settable by the user. This patch introduces a callback that allows the sas class to pass these settings on to the driver. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] SAS: consolidate linkspeed definitionsJames Bottomley
At the moment we have two separate linkspeed enumerations covering roughly the same values. This patch consolidates on a single one enum sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the aic94xx driver. Eventually I'll get around to removing the duplicated fields in asd_sas_phy and sas_phy ... Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] scsi-driver ultrastore replace Scsi_Cmnd with struct scsi_cmndHenrik Kretzschmar
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] fix up non-modular SCSIJames Bottomley
The recent change to the way scsi_device_get()/put() work broke the non modular build (we do a module_refcount on a NULL). Fix this by checking for non-null before checking module_refcount(). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] Fix refcount breakage with 'echo "1" > scan' when target already presentJames Bottomley
Spotted by: Dan Aloni <da-xx@monatomic.org> The problem is there's inconsistent locking semantic usage of scsi_alloc_target(). Two callers assume the target comes back with reference unincremented and the third assumes its incremented. Fix by always making the reference incremented on return. Also fix path in target alloc that could consistently increment the parent lock. Finally document scsi_alloc_target() so its callers know what the expectations are. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] lpfc 8.1.10 : Change version number to 8.1.10James Smart
Change version number to 8.1.10 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>