aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2005-11-13[libata passthru] address slave devices correctlyMark Lord
2005-11-13[PATCH] libata: fix comments on ata_tf_from_fis()Mark Lord
Fix description on comments for ata_tf_from_fis(). Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-13[PATCH] sil24: add missing ata_pad_free()Tejun Heo
sil24_port_stop() is missing call to ata_pad_free() thus leaking pad buffer when a port is stopped. This patch adds it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-12[libata ahci] set port ATAPI bit correctlyJeff Garzik
Although according to the documentation this largely only affects desktop LED control, let's make sure we set the ATAPI bit when we have an ATAPI device attached to the port.
2005-11-12[libata ahci, qstor] fix miscount of scatter/gather entriesJeff Garzik
Don't directly reference qc->n_elem, as that might cause an off-by-one error for misaligned (padded) ATAPI transfers.
2005-11-11[PATCH] kill libata scsi_wait_req usage (make libata compile with scsi-misc ↵Mike Christie
changes) scsi_wait_req does not exist any more in the SCSI layer. This patch makes it so libata can compile again. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds
2005-11-11[PATCH] libata: propogate host private data from probe functionAlan Cox
This will let me chop the code size of several drivers right down. In many cases the actual private data is very useful and constant for a given host controller so being able to just pass it at probe time would be very useful indeed (eg with the via driver would could pass the udma clocking and reduce the code size, or with the AMD one the UDMA multiplier and the offset) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[libata sata_mv] add Adaptec 1420SA PCI IDJeff Garzik
Contributed by Jeroen <dekien@pandora.be>
2005-11-11Merge branch 'master'Jeff Garzik
2005-11-10[PATCH] lpfc build fixJeff Garzik
Current upstream 'allmodconfig' build is broken. This is the obvious patch... Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-10[libata] constify PCI ID table in several driversJeff Garzik
2005-11-10Merge by hand (whitespace conflicts in libata.h)James Bottomley
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-10[PATCH] libata: Note a nasty ATA quirkAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-09[PATCH] ide: ide-scsi fails to call idescsi_check_condition for things like ↵Willem Riede
"Medium not present" This patch started life as a response to fedora specific ide subsystem changes that made error handling of my ATAPI tape drive fail; the specifics are in https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=160868 The insertion of the statement rq->errors = err; near the end of ide_end_drive_cmd() in drivers/ide/ide-io.c means that rq->errors does not contain what it needs to in idescsi_end_request() in drivers/scsi/ide-scsi.c anymore. Recent mainline kernels now also have this change. The patch below makes ide-scsi whole. Signed-off-by: Willem Riede <wrlk@riede.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-09[SCSI] qla2xxx: Update version number to 8.01.03-k.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Correct ISP24xx soft-reset handling.Andrew Vasquez
A driver must wait 100us before attempting an MMIO operation to the RISC after a soft-reset has been initiated. A similar delay was needed with earlier ISPs. Note: a PCI config-space read is used to flush the MMIO write to the ISP, since the ISP's state machines are unable to respond to any MMIO read during the reset process. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Correct abort issue during loop-down state.Ravi Anand
Correct issue where abort I/O command was not being issued when the loop-state was down. Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Correct loop-in-transition issuesRavi Anand
When mulitple initiators are coming up in an FCAL topology. Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] qla2xxx: Correct additional posting issues during NVRAM accesses.Andrew Vasquez
On MMIO relaxed-order platforms, it is possible for the proper delay during NVRAM access to begin before the request passes through the PCI bus (via a MMIO write) to the ISP. Thus, causing a subsequent read to the NVRAM part to fail. Add a MMIO read, after the MMIO write to insure any posted writes are flushed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] aacraid: Fix read capacity 16 return dataMark Haverkamp
Received from Mark Salyzyn. The return data from a read capacity 16 needs to have RTO_EN and PROT_EN zeroed out. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] remove Scsi_Device typedefChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] remove Scsi_Pointer typedefChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] remove Scsi_Host_Template typedefChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-11-09[PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reasonOlaf Hering
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[SCSI] sd: fix issue_flushJames Bottomley
sd_issue_flush() is called from atomic context so we can't use the semaphore based routines to get a reference to the scsi_disk. Assume something else already got the reference so we can safely use it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[PATCH] libata: if condition fix for ata_dev_identify()Albert Lee
- if condition fix for ata_dev_identify() - ata_pio_poll() minor cleanup. Changes: - Use (dev->class == ATA_DEV_ATA) for ata_dev_identify() since "qc->tf.command" has been overwritten by the device status - Use HSM_ST_TMOUT directly in ata_pio_poll() Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============ Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-09[PATCH] libata kernel-doc fixesRandy Dunlap
Fix all reported kernel-doc errors in libata. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-09Merge branch 'master'Jeff Garzik
2005-11-08[SCSI] Fix refcount leak in scsi_report_lun_scanAlan Stern
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-08[SCSI] fix usb storage oopsgoggin, edward
The problem is that scsi_run_queue is called from scsi_next_command() after doing a scsi_put_command. If the command was the only thing holding the reference on the scsi_device then the resulting device put will tear down the block queue. Fix this by taking a reference to the device and holding it around scsi_run_queue() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-08Merge by hand (conflicts between pending drivers and kfree cleanups)James Bottomley
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-07[PATCH] kfree cleanup: drivers/scsiJesper Juhl
This is the drivers/scsi/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in drivers/scsi/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] drivers/scsi: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_uninterruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] fix remaining missing includesTim Schmielau
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[libata] eliminate use of drivers/scsi/scsi.h compatibility header/definesJeff Garzik
2005-11-06[SCSI] ipr: Driver version 2.1.0brking@us.ibm.com
Bump the driver version. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Better handle failure of adapter bringup commandsbrking@us.ibm.com
Some new ipr adapters do not support some of the initialization commands currently sent to it from the driver. Handle these commands failing and continue on with the adapter initialization. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Increase ipr device scanning limitsbrking@us.ibm.com
Increase device scanning limits so that all devices are found. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: New PCI Idsbrking@us.ibm.com
Adds support for some new ipr adapters Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Support device reset to RAID disksbrking@us.ibm.com
Support now exists in some ipr adapters to issue a device reset to an Advanced Function disk. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Support new device queueing modelbrking@us.ibm.com
New ipr adapters support a new device queueing model in the adapter firmware. The queueing model is the NACA queueing model, but it does not mean use of NACA is required. The new model removes some of the adapter firmware queue state that made handling QERR=0 almost impossible. The queueing model on older adapters included the concept of a queue frozen state, which would freeze the response queue in the adapter when a check condition occurred, requiring a a primitive to resume the queue. The new queueing model removes this complexity. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: New adapter error typesbrking@us.ibm.com
Handle some new types of ipr errors that can be returned by the adapter. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Handle device autosensebrking@us.ibm.com
Some newer ipr adapters are capable of returning autosense from devices that support it. This patch adds the data structures for the autosense buffer. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Module parm to disable RAID 0 auto createbrking@us.ibm.com
Some ipr adapters will automatically create single device RAID 0 arrays for all unconfigured RAID capable devices found at adapter initialization time. This patch adds a module parameter to disable this behavior. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Runtime resetbrking@us.ibm.com
Some IPR RAID adapter will automatically create single device RAID arrays for all attached devices when the card is initialized. Setting the RUNTIME_RESET doorbell bit will prevent this from occurring, since we only want this behavior the first time the card is initialized and not each time the card happens to get reset. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: handle new adapter errorsbrking@us.ibm.com
Add support for handling some new errors that may be returned by ipr adapters. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Provide reset_adapter retry method for offlined adaptersbrking@us.ibm.com
If an ipr adapter repeatedly fails its initialization the ipr driver will take the adapter offline and never talk to it again. This provides a method for the user to manually try the initialization again through sysfs. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Runtime debugging optionsbrking@us.ibm.com
Make some compile time debugging options runtime module options. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>