aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial/bfin_5xx.c
AgeCommit message (Collapse)Author
2009-06-11Blackfin Serial Driver: disable dma rx interrupt only rather than all irqsSonic Zhang
The UART RX handling code isn't exactly speeding, so don't go disabling all interrupts when processing the buffer. Just disable the relevant DMA interrupt. This greatly improves latency of the system when utilizing the UART. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Blackfin Serial Driver: handle anomaly 05000231Sonic Zhang
05000231 - UART STB Bit Incorrectly Affects Receiver Setting For processors affected by this, we cannot safely allow CSTOPB to be set as the UART will then be unable to properly clock in bytes. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Blackfin Serial Driver: annotate anomalies 05000215 and 05000099Sonic Zhang
Add some comments for how these anomalies are addressed: 05000215 - UART TX Interrupt Masked Erroneously We always clear ETBEI within last UART TX interrupt to end a string. It is always set when starting a new tx transfer. 05000099 - UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time This anomaly affects driver only in POLL code where multi bits of UART_LSR are checked. It doesn't affect current bfin_5xx.c driver. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Blackfin Serial Driver: handle irregular DMA register status in auto start modeSonic Zhang
This bug is caused by irregular behavior of DMA register CURR_X_COUNT and CURR_Y_COUNT when an auto restart uart rx DMA run to last byte in DMA buffer, trigger the interrupt and stay at this possiton. The status of current x and y is 0:7 instead of 512:8 or 0:8. The driver doesn't take care of this case when calculating the position. URL: http://blackfin.uclinux.org/gf/tracker/5063 Reported-by: Tomasz Motylewski <t.motylewski@bfad.de> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Blackfin Serial Driver: fix missing new lines when under loadGraf Yang
Add a SSYNC() into bfin_serial_dma_tx_chars() to ensure DMA registers are written with new data otherwise we might miss a byte or two when the system is under load. PIO mode is OK though. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Blackfin Serial Driver: fix baudrate for early_printkRobin Getz
Since we already setup the early console UART in arch/blackfin/kernel/early_printk.c, and common functions which are enabled from the .setup will override the proper settings later, don't fill in these structures. Otherwise we get mangled baudrate settings when using early_printk. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Blackfin Serial Driver: fix error while transferring large filesSonic Zhang
Ignore receiving data if new position is in the same line of current buffer tail and is small. This should decrease overruns. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21bfin_5xx: misplaced parenthesesRoel Kluin
`!' has a higher precedence than `&', parentheses are misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07tty: Blackin CTS/RTSSonic Zhang
Both software emulated and hardware based CTS and RTS are enabled in serial driver. The CTS RTS PIN connection on BF548 UART port is defined as a modem device not as a host device. In order to test it under Linux, please nake a cross UART cable to exchange CTS and RTS signal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Change hardware flow control from poll to interrupt drivenSonic Zhang
Only the CTS bit is affected. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Subtract ANOMALY_05000230 on quotGraf Yang
Fix bug - up arrow key works abnormal for bf561 ezkit board Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Fix DMA rx ring buffer handlingSonic Zhang
Reported-by: Qian Zhang <zhangq@sansitech.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Fix tty compile error in PIO modeSonic Zhang
Fixes this compile issue: drivers/serial/bfin_5xx.c: In function bfin_serial_rx_chars: drivers/serial/bfin_5xx.c:178: error: struct uart_info has no member named tty Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06blackfin: Use unsigned long for flags with irq functionsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Blackfin Serial Driver: Remove BI status for known_good_charSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Blackfin Serial Driver: Fix bug - BF527-EZKIT unable to receive large files ↵Sonic Zhang
over UART in DMA mode Add spin_lock_irqsave() when receive and transfer data. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Blackfin Serial Driver: Clean serial console and early prink code.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Blackfin Serial Driver: fix bug - SIR driver stop receiving randomlyGraf Yang
Bug description: The IRDA receiver may can't receiving any more after processed some signals. To duplicate this issue is put three IRDA devices together, one blackfin, two none blackfin, they will detect each other. Let one none blackfin devices irdaping the blackfin devices, when it stopped print out ping information, it is the time that blackfin stoped receiving, the time is random. The related register bit is OK, the other devices is sending data continuously. But no interrupt come. Fixing: I tried Michael's suggestion that request the UARTx error interrupt, and reset the IRDA when found FE error. This method helps much, but it can't completely avoid stop. Reset the IRDA before every time sending the data is more safe. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Blackfin Serial Driver: updates kgdb over Blackfin serial driver with kgdb ↵Sonic Zhang
framework Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped ↵Sonic Zhang
interrupts in PIO mode Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UARTGraf Yang
We now use the sir_dev/irtty_sir/uart/bfin_serial drivers framework to monitor the TX status. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - Don't call tx_stop in tx_transfer.Sonic Zhang
Disable irq and return immediately. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Remove useless stopSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: move common variables out of serial headers and into ↵Mike Frysinger
the serial driver move common variables out of serial headers and into the serial driver and rename "nr_ports" to "nr_active_ports" so as to easily differentiate between BFIN_UART_NR_PORTS (the # of available) and nr_ports (the # of enabled) Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: trim trailing whitespace -- no functional changesMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: Fix bug - should suspend/resume/remove all uart ports.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Blackfin Serial Driver: use __initdata for data, not __initMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-27Blackfin arch: move include/asm-blackfin header files to arch/blackfinBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-04blackfin: Fix compile failure in tty codeAlan Cox
Blackfin peers into the ldisc in an odd way for IRDA snooping which therefore got missed. Simple enough fix. Closes bug #11233 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Fix compile errors in SGI console drivers (linux-next tree)Takashi Iwai
The below is the patch to replace blindly all possible places, including Jack's fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de> (Reviewed and checked rather than blindly added) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-19Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue.Sonic Zhang
This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-07Blackfin serial driver: fix up tty core set_ldisc API change breakage bugGraf Yang
This is the patch that follows Linus's modification about set_ldisc. Graf has built and tested it on BF537 using Linus's git Tree. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-03Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.Sonic Zhang
Hide difference in head file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07Blackfin Serial Driver: abstract away DLAB differences into headerMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07Blackfin Serial Driver: macro away the IER differences between processorsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-30serial: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25Blackfin Serial Driver: fix bug - use mod_timer to replace only add_timer.Sonic Zhang
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=4045 If adding timer in both timer handler and rx interrupt, a timer may be added when it is till in the pending list. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25Blackfin Serial Driver: the uart break anomaly has been given its own ↵Mike Frysinger
number, so switch to it Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25Blackfin Serial Driver: use BFIN_UART_NR_PORTS to help SIR driver in uart port.Graf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23Blackfin Serial Driver: Fix bug - kernel hangs when accessing uart 0 on ↵Sonic Zhang
bf537 when booting u-boot and linux on uart 1 Wait only when this UART is enabled. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3995 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24Blackfin Serial Driver: punt unused lsr variableMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29Blackfin Serial Driver: Enable IR function when user application (irattach ↵Graf Yang
/dev/ttyBFx -s) call TIOCSETD ioctl with line discipline N_IRDA Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-15serial: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable serial platform drivers, to re-enable auto loading. NOTE that Kconfig for some of these drivers doesn't allow modular builds, and thus doesn't match the driver source's unload support. Presumably their unload code is buggy and/or weakly tested... [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-29Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task.Sonic Zhang
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3910 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25Blackfin Serial Driver: Fix bug - update tx dma buffer tail before wake up ↵Sonic Zhang
processes. Also make rx dma buffer work as a loop. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25Blackfin Serial Driver: Fix bug - Increase buffer tail immediately before ↵Sonic Zhang
starting tx dma. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2920 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-02[Blackfin] serial driver: Add flow control support to bf54xSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] serial driver: Fix bug Poll RTS/CTS status in DMA mode as wellSonic Zhang
https://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3858 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-11[Blackfin] serial driver: use simpler comment headers and strip out ↵Mike Frysinger
information that is maintained in the scm's log Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] serial driver: rework break flood anomaly handling to be more ↵Mike Frysinger
robust/realistic about what we can actually work around Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 03:33:57 +0000