aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial/serial_cs.c
AgeCommit message (Collapse)Author
2006-10-01[SERIAL] Fix resume handling bugRussell King
Unfortunately, pcmcia_dev_present() returns false when a device is suspended, so checking this on resume does not work too well. Omit this test. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01[SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 cardRussell King
Mauro Ziliani reports that this card has a higher clock rate. Rather than tweak the 8250 driver to handle this, add a quirk to pass the correct clock rate to the driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01[SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirkRussell King
According to the existing code, Nokia only make single-port cards, but are detected as multi-port cards. Handle this in roughly the same way via the config quirk - forcing it to be a real single port card (info->multi=0) changes the way we allocate the IO memory, which might stop the card working. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01[SERIAL] serial_cs: add configuration quirkRussell King
Add a quirk primerily to handle tweaks to the link->conf structure, eg as required for Socket cards. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01[SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirkRussell King
Move the Oxford Semi OX950 / Possio GCC wakeup handling to a quirk wakeup handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01[SERIAL] serial_cs: convert IBM post-init handling to a quirkRussell King
Move IBM quirk handling into its own quirk entry. Note that doing quirk handling after we've registered the ports is racy, but since I don't know if moving this will have an undesired effect, it's probably better to leave where it is. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01[SERIAL] serial_cs: allow wildcarded quirksRussell King
Some quirks we will introduce next apply to (eg) all cards of one manufacturer. Therefore, we need a way to list these in the quirk table - use ~0 - this is not a possible device ID value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01[SERIAL] serial_cs: convert multi-port table to quirk tableRussell King
- rename multi_id table to serial_quirk / quirks[] - use named initialisers - store a pointer to the quirk table in the serial_info structure so we can use the quirk table entry later. - apply multi-port quirk after the multi-port guessing code, but only if it's != -1. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01[SERIAL] serial_cs: Use clean up multiport card detectionRussell King
- Use ARRAY_SIZE() instead of home grown based version. - use parse->manfid.card rather than le16_to_cpu(buf[1]) - manfid.card is already converted to this format. - use info->prodid in subsequent tests rather than parse->manfid.card. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30[PATCH] pcmcia: another ID for serial_cs.cDominik Brodowski
Add an ID for "GlobeTrotter" cards which need a CIS override Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45Petr Vandrovec
This ugly hack add support for Siemens MC45 PCMCIA GPRS card (which is identical to Possio GCC, and which is offered by one of our local GPRS providers). Card has unfortunate feature that after poweron oxcf950 chip is fully powered and works, but attached MC45 modem is powered down :-( There is a special sequence (which takes 1 sec :-( ) to poweron MC45 (and after MC45 powers on, it takes more than 2 secs until firmware fully boots...) which needs to be executed after all powerons. I'm really not familiar with PCMCIA subsystem, so I have no idea whether I should issue request_region() on rest of oxcf950 address range (0-7 is UART, 8-F are special configuration registers), or how this should be better integrated with PM system and so on - I just put it in same place where another hack already lived... Card uses 18.432MHz XTAL, so to get it to work you must add lines below to the /etc/pcmcia/serial.opts. case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in '030c,0003-2-GPRS-CARD--') SERIAL_OPTS="baud_base 1152000" ;; esac Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: convert DEV_OK to pcmcia_dev_presentDominik Brodowski
Instead of the DEV_OK macro, drivers should use pcmcia_dev_present(). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: use bitfield instead of p_state and stateDominik Brodowski
Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: add return value to _config() functionsDominik Brodowski
Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: remove dev_link_t and client_handle_t indirectionDominik Brodowski
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: embed dev_link_t into struct pcmcia_deviceDominik Brodowski
Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: remove unneeded Vcc pseudo settingDominik Brodowski
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and Vpp2 can only be set to the same value, a lot of code can be streamlined. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: default suspend and resume handlingDominik Brodowski
In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: add pcmcia_disable_deviceDominik Brodowski
pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary cleanups upon device or driver removal: it calls the appropriate pcmcia_release_* functions, and can replace (most) of the current drivers' _release() functions. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] serial_cs: add Merlin U630 IDsDomen Puncer
Add Merlin U630 IDs. Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-12[PATCH] pcmcia: add new IDs for serial_cs.cDominik Brodowski
Add IDs for Sierra Aircard 55 CDMA 1xrtt Modem -- a CIS update is required for this card. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe ↵Dominik Brodowski
callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: remove dev_list from driversDominik Brodowski
The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callbackDominik Brodowski
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] pcmcia: new suspend coreDominik Brodowski
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-28[SERIAL] mark several serial tables constArjan van de Ven
This patch marks a few serial data structures const, moving them to .rodata where they won't false-share cachelines with things that get written to. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26[PATCH] pcmcia: new IDs for serial_csDominik Brodowski
Add new ID to serial_cs.c; the CIS fimware override is available by the manufacturer at http://www.sierrawireless.com . Remember to name the CIS binary SW_7xx_SER.cis and to put it into /lib/firmware/ Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-07-28[PATCH] pcmcia: fix many device IDsKomuro
If the product-id-string contains the '+' , '&' ,'_', it was not converted properly from the /etc/pcmcia/config(pcmcia-cs config file). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: remove references to pcmcia/version.hDominik Brodowski
As a follow-up, remove the inclusion of pcmcia/version.h in many files. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] pcmcia: move event handlerDominik Brodowski
Move the "event handler" to struct pcmcia_driver -- the unified event handler will disappear really soon, but switching it to struct pcmcia_driver in the meantime allows for better "step-by-step" patches. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27[PATCH] pcmcia: more IDs for TDK multifunction cardsJun Komuro
Add new pcmcia id_table for fmvj18x_cs and serial_cs. (TDK multi-function card (NetPartner9610 and MobileNetworker3200)) Signed-off-by: Jun Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27[PATCH] pcmcia: id_table for serial_csDominik Brodowski
Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] serial_cs device identification fixPetr Vandrovec
serial_cs's vendor/device identification got broken by Yum Rayan's change '[PATCH] serial_cs: Reduce stack usage in serial_event()' - it changed buf type from u_short* to char*, breaking device manufacturer & card number retrieval. Due to this my modem stopped from being recognized as special case. Code will work much better if we'll rely on first_tuple's parser instead of doing parse ourselves. Code also looks simpler after change. Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] serial_cs: Reduce stack usage in serial_event()Yum Rayan
This patch reduces the stack usage of the function serial_event() in serial_cs from 2212 to 228. I used a patched version of gcc 3.4.3 on i386 with -fno-unit-at-a-time disabled. This patch is only compile tested. Acked-by: Randy Dunlap <rddunlap@osdl.org> Signed-off-by: Yum Rayan <yum.rayan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!