aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2005-11-09[DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-07[SUNSU]: Do not mark sunsu_console_setup() __initDavid S. Miller
Sets off buildcheck warnings. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-07[PATCH] m68knommu: add 5208 ColdFire UART support to ColdFire serial driverGreg Ungerer
Add support for the Freescale 5208 processor UART's to the common ColdFire serial port code. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] serial: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_uninterruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] serial console: touch NMI watchdogAndrew Morton
Large console spews from IRQ or local_irq_disable() sections can cause the NMI watchdog to go off. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.Pantelis Antoniou
The offsets of the registers are in a different place, and some parts cannot handle a full set of modem control signals. Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.ocm> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-11-04[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfromRussell King
No longer maintained
2005-11-03[SERIAL] 8250_early.c passing 0 instead of NULLBen Dooks
Fix sparse warning about passing `0` to simple_strtoul() Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-01Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31[SERIAL] Arrange better identification of portsRussell King
Folk seem to get confused when they see two or more ttyS0 ports appearing at boot time. One comes from the legacy table, and one from PNP. Hence, display the bus ID of the device which supplied the port. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-10-30[PATCH] Added a Receive_Abort to the Marvell serial driverCarlos Sanchez
Added a Receive_Abort to the Marvell serial driver Fix occasional input overrun errors on Marvell serial driver - If the Marvell serial driver is repeatedly started and then stopped it will occasionally report an input overrun error when started. - Added a Receive_Abort to the Marvell serial driver to abort previously received receive errors when re-starting the receive Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Carlos Sanchez <csanchez@mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] ioc4 serial support - mostly cleanupPat Gefre
Various small mods for the Altix ioc4 serial driver - mostly cleanup: - remove UIF_INITIALIZED usage - use the 'lock' from uart_port - better multiple card support Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[SERIAL] remove unneeded code from serial_core.cJayachandran C
This patch fixes an issue reported by Coverity in serial/serial_core.c Error reported: Variable "&((info)->tty)->flags" tracked as NULL was passed to a function that dereferences it. The later statements in the function assumes 'info->tty != NULL', so this check is not necessary. Probably a 'BUG_ON(info->tty == NULL)' can be added. Signed-off-by: Jayachandran C. <c.jayachandran at gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30[DRIVER MODEL] Add missing driver_unregister to IMX serial driverRussell King
Fix the IMX serial driver to unregister its driver structure when it is unloaded. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
2005-10-28Merge ../bleed-2.6Greg KH
2005-10-28Merge branch 'forlinus' of git://parisc-linux.org/home/kyle/git/parisc-2.6Linus Torvalds
2005-10-28[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[ARM] 3029/1: Add HWUART support for PXA 255/26xMatt Reimer
Patch from Matt Reimer Adds support for HWUART on PXA 255 / 26x. This patch originally came from http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch and has been tweaked by me. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2918/1: [update] Base port of Comdial MP1000 platfromJon Ringle
Patch from Jon Ringle Updated 2898/1 per comments: - Removed fixup - Moved code in mach-mp1000/ to mach-clps711x/ - Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom Please comment. Signed-off-by: Jon Ringle Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-26Auto-update from upstreamKyle McMartin
2005-10-24[SERIAL] new hp diva console portJustin Chen
Add the new ID 0x132a and configure the new PCI Diva console port. This device supports only 1 single console UART. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-24[SERIAL] support the Exsys EX-4055 4S four-port cardBjorn Helgaas
Tested by Wolfgang Denk with this device: 00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: Exsys EX-4055 4S(16C550) RS-232 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at 7080 [size=128] Region 2: I/O ports at 7400 [size=32] 00:0f.0 Class 0280: 10b5:9050 (rev 01) Subsystem: d84d:4055 Results with this patch: Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Found IRQ 10 for device 0000:00:0f.0 ttyS4 at I/O 0x7400 (irq = 10) is a 16550A ttyS5 at I/O 0x7408 (irq = 10) is a 16550A ttyS6 at I/O 0x7410 (irq = 10) is a 16550A ttyS7 at I/O 0x7418 (irq = 10) is a 16550A Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-21[PARISC] Fix mux.c driverMatthew Wilcox
Missing spin_lock_init() made the Mux driver hang on SMP systems. Fix up users of ->hpa to use ->hpa.start instead Remove warning in 8250_gsc.c by eliminating serial_line_nr Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21[PARISC] Convert parisc_device to use struct resource for hpaMatthew Wilcox
Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Fix up users of ->hpa to use ->hpa.start instead. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21[PARISC] Change the driver names so /sys/bus/parisc/drivers/ looks betterMatthew Wilcox
Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver names. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-15[SERIAL] Add SupraExpress 56i supportmaximilian attems
The modem is said to work with belows addition to pnp_dev_table[]: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=296011 Signed-off-by: maximilian attems <janitor@sternwelten.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-10-14[PATCH] sh-sci.c sci_start_tx errorYoshinori Sato
Argument does not agree. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[SERIAL] Add SupraExpress 336i Sp ASVD modem IDBaris Cicek
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.cLothar Wassmann
Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2971/1: i.MX uart handle rts irqSascha Hauer
Patch from Sascha Hauer handle rts interrupt Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2976/1: S3C2410: add static to functions in serial driverBen Dooks
Patch from Ben Dooks The s3c2410 serial driver is missing static declerations on several functions that are not exported, and have no need of being exported outside the driver Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10[SPARC64]: Fix oops on runlevel change with serial console.David S. Miller
Incorrect uart_write_wakeup() calls cause reference to a NULL tty pointer in sunsab and sunzilog serial drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-10[ARM] 2964/1: S3C2410 - serial: add .owner to driverBen Dooks
Patch from Ben Dooks Initialise the driver's .owner field so that the device driver can be referenced to the module that owns it Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10[ARM] 2957/1: imx UART Error handlingSascha Hauer
Patch from Sascha Hauer Fix error path in imx_startup. Signed-off-by: Giancarlo Formicuccia <gformicuccia@atinno.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-03[SUNSU]: Fix bogus locking in sunsu_change_mouse_baud()David S. Miller
The lock is not held when calling this function, so we shouldn't drop then reacquire it. Based upon a report from Jim MacBaine. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-01[ARM] 2944/1: GCC 4 mx1ads serial driver compile fixVincent Sanders
Patch from Vincent Sanders When building the mx1ads ARM platforms the serial driver fails to compile with GCC 4.01 due to extern/static ambiguity. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-30[PATCH] ioc4_serial: Remove bogus error messageBrent Casavant
This change removes a bogus error message from the IOC4 serial driver interrupt handler. This error message is bogus for two reasons. First, it can never occur given that current code takes care to initialize IOC4 in such a way that these "unknown" interrupts could never occur. Second, this code fails to take into account that other drivers can share the IOC4 interrupt mechanism through SA_SHIRQ, and thus this driver is not in-fact "all-knowing". Finally, this error message triggers every time some "unknown" interrupt occurs -- it's not rate limited or repetition limited in any way, thereby effectively denying use of the console device. Given its bogosity in the first place, it's best to just get rid of it entirely. Acked-by: Pat Gefre <pfg@sgi.com> Signed-off-by: Brent Casavant <bcasavan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-09-29Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-09-29[ARM] Don't include mach-types.h unnecessarilyRussell King
It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26[PATCH] pcmcia: new IDs for serial_csDominik Brodowski
Add new ID to serial_cs.c; the CIS fimware override is available by the manufacturer at http://www.sierrawireless.com . Remember to name the CIS binary SW_7xx_SER.cis and to put it into /lib/firmware/ Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-25[ARM] 2933/1: S3C2410 - fix serial port warningsBen Dooks
Patch from Ben Dooks Fix the following warnings produced from drivers/char/s3c2410.c. drivers/serial/s3c2410.c:757: warning: 'clk' may be used uninitialized drivers/serial/s3c2410.c:756: warning: 'clksrc' may be used uninitialized Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-24[SERIAL] Remove unused variable in clps711x.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 08:34:47 +0000