aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2006-09-26[PATCH] suspend: make it possible to disable serial console suspendRafael J. Wysocki
Hack uart_suspend_port() and uart_resume_port() so that serial console ports are not suspended if CONFIG_DISABLE_CONSOLE_SUSPEND is set. This makes it possible to debug the suspend and resume routines of all device drivers as well as the lowest-level swsusp code with the help of the serial console. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (114 commits) [POWERPC] Fix ohare IDE irq workaround on old powermacs [POWERPC] EEH: Power4 systems sometimes need multiple resets. [POWERPC] Include <asm/mmu.h> in arch/powerpc/sysdev/fsl_soc.h for phys_addr_t. [POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.c [POWERPC] Maple U3 HT - reject inappropriate config space access [POWERPC] Fix IPIC pending register assignments [POWERPC] powerpc: fix building gdb against asm/ptrace.h [POWERPC] Remove DISCONTIGMEM cruft from page.h [POWERPC] Merge iSeries i/o operations with the rest [POWERPC] 40x: Fix debug status register defines [POWERPC] Fix compile error in sbc8560 [POWERPC] EEH: support MMIO enable recovery step [POWERPC] EEH: enable MMIO/DMA on frozen slot [POWERPC] EEH: code comment cleanup [POWERPC] EEH: balance pcidev_get/put calls [POWERPC] PPC: Fix xmon stack frame address in backtrace [POWERPC] Add AT_PLATFORM value for Xilinx Virtex-4 FX [POWERPC] Start arch/powerpc/boot code reorganization [POWERPC] Define of_read_ulong helper [POWERPC] iseries: eliminate a couple of warnings ...
2006-09-18[ARM] 3793/1: S3C2412: fix wrong serial info structBen Dooks
Patch from Ben Dooks The S3C2440 serial info struct is being passed through the S3C2412 serial info struct probe routine. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Glexiner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-14Merge branch 'linux-2.6'Paul Mackerras
2006-09-12sh64: Trivial build fixes.Paul Mundt
While we've been sorting out the toolchain fiasco, some of the code has suffered a bit of bitrot. Building with GCC4 also brings up some more build warnings. Trivial fixes for both issues. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-08-31Merge branch 'merge'Paul Mackerras
2006-08-30[SERIAL] 8250: constify some serial structsHelge Deller
- some const- ification and usage of ARRAY_SIZE() in serial drivers Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-30[SERIAL] Make uart_match_port() work with all memory mapped UARTsSergei Shtylyov
uart_match_port() always fails with UPIO_MEM32, UPIO_AU, and UPIO_TSI cases. Since they match to the memory mapped UARTs, they should be handled just like UPIO_MEM case. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27[SERIAL] Support for Intashield 2 port PCI serial cardPeter Horton
Here is a patch that adds support for the Instashield IS-200 2 port PCI serial card. Signed-off-by: Peter Horton <pdh@colonel-panic.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-23[SERIAL] sunzilog: Mirror the sunsab serial setup bug fix.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-23[SERIAL] sunsab: Fix E250 console with RSC.Marc Zyngier
This fixes yet another sunsab problem, when console is set to anything but the first port. The console framework calls sunsab_console_setup for each port, and we end up setting up a console on a not yet discovered port, which leads to an Oops. Instead, defer console setup until the requested port is properly initialized. Tested on an E250 through an RSC console. Reported by Daniel Smolik <marvin@mydatex.cz> Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-01Merge branch 'merge'Paul Mackerras
2006-07-31[POWERPC] powermac: Constify & voidify get_property()Jeremy Kerr
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powermac platform & macintosh driver changes. Built for pmac32_defconfig, g5_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-21[SERIAL] sunzilog: Fix instance enumeration.David S. Miller
Just do a linear enumeration so that we handle sun4d systems correctly. As a consequence, eliminate the hard coded keyboard and mouse channel line values, use the CONS_{KEYB,MS} flags instead. Also, report the keyboard/mouse Zilog channels just like the uart ones do. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[SERIAL] sunzilog: Remove duplicate IRQ registry in zs_probe().David S. Miller
We do it now in sunzilog_init() after all devices have been probed. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[SERIAL] sunzilog: Register IRQ after all devices have been probed.David S. Miller
Otherwise we will deref half-initialized channel pointers and crash in the interrupt handler. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[SERIAL] sunsab: Get line numbers and table sizing correct.David S. Miller
Table sizing code should look for "se" not "su" nodes. The chip at the lower address should get the first index. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21[SPARC64] Fix sunsab ports orderingMarc Zyngier
Register second SAB port before the first one, as serial A is wired to it, and expected to appear as ttyS0. Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-14[SERIAL] sunsab: Fix significant typo in sab_probe()David S. Miller
Instead of initializing both ports of a SAB device properly, we were setting up the first port structure twice and ending up only with the second port, oops. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-14[SERIAL] sunsu: Report keyboard and mouse ports in kernel log.David S. Miller
Otherwise there is no explicit mention of these devices. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-13Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (53 commits) [MIPS] sparsemem: fix crash in show_mem [MIPS] vr41xx: Update workpad setup function [MIPS] vr41xx: Update e55 setup function [MIPS] vr41xx: Removed old v2.4 VRC4173 driver [MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.h [MIPS] MIPSsim: Build fix, rename sim_timer_setup -> plat_timer_setup. [MIPS] Remove unused code. [MIPS] IP22 Fix brown paper bag in RTC code. [MIPS] Atlas, Malta, SEAD: Don't disable interrupts in mips_time_init(). [MIPS] Replace board_timer_setup function pointer by plat_timer_setup. [MIPS] Nuke redeclarations of board_time_init. [MIPS] Remove redeclarations of setup_irq(). [MIPS] Nuke redeclarations of board_timer_setup. [MIPS] Print out TLB handler assembly for debugging. [MIPS] SMTC: Reformat to Linux style. [MIPS] MIPSsim: Delete redeclaration of ll_local_timer_interrupt. [MIPS] IP27: Reformatting. [MIPS] IP27: Invoke setup_irq for timer interrupt so proc stats will be shown. [MIPS] IP27: irq_chip startup method returns unsigned int. [MIPS] IP27: struct irq_desc member handler was renamed to chip. ...
2006-07-13Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250: sysrq deadlock fix [SERIAL] 8250: add tsi108 serial support [SERIAL] IP22: fix serial console hangs [SERIAL] dz: Fix compilation error
2006-07-13[MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.hYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[SERIAL] sunsu: Handle keyboard and mouse ports directly.David S. Miller
The sunsu_ports[] array exists merely to be able to easily use an integer index to get at the proper serial console port struct. We size this only for real ports, not for the keyboard and mouse, and thus keyboard and mouse port registration would fail. Fix this by dynamically allocating the port struct for the keyboard and mouse, instead of using the sunsu_ports[] array. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-09[SERIAL] 8250: sysrq deadlock fixAndrew Morton
Fix http://bugzilla.kernel.org/show_bug.cgi?id=6716 Doing a sysrq over a serial line into an SMP machine presently deadlocks. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-09[SERIAL] 8250: add tsi108 serial supportZang Roy-r61911
The following patch gets rid of CONFIG_TSI108_BRIDGE. I add UPIO_TSI to handle IIR and IER register in serial_in and serial_out. (1) the reason to rewrite serial_in: TSI108 rev Z1 version ERRATA. Reading the UART's Interrupt Identification Register (IIR) clears the Transmit Holding Register Empty (THRE) and Transmit buffer Empty (TEMP) interrupts even if they are not enabled in the Interrupt Enable Register (IER). This leads to loss of the interrupts. Interrupts are not cleared when reading UART registers as 32-bit word. (2) the reason to rewrite serial_out: Check for UART_IER_UUE bit in the autoconfig routine. This section of autoconfig is excluded for Tsi108/109 because bits 7 and 6 are reserved for internal use. They are R/W bits. In addition to incorrect identification, changing these bits (from 00) will make Tsi108/109 UART non-functional. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-09[SERIAL] IP22: fix serial console hangsJulien BLACHE
The patch below fixes serial console hangs as seen on IP22 machines. Typically, while booting, the machine hangs for ~1 minute displaying "INIT: ", then the same thing happens again when init enters in the designated runlevel and finally the getty process on ttyS0 hangs indefinitely (though strace'ing it helps). strace (-e raw=ioctl, otherwise the ioctl() translation is utterly bogus) reveals that getty hangs on ioctl() 0x540f which happens to be TCSETSW (I saw it hang on another console ioctl() but couldn't reproduce that one). A diff between ip22zilog and sunzilog revealed the following differences: 1. the channel A flag being set on up.port.flags instead of up.flags 2. the channel A flag being set on what is marked as being channel B 3. sunzilog has a call to uart_update_timeout(port, termios->c_cflag, baud); at the end of sunzilog_set_termios(), which ip22zilog lacks (on purpose ?) The patch below addresses point 1 and fixes the serial console hangs just fine. However point 2 should be investigated by someone familiar with the IP22 Zilog; it's probably OK as is but even if it is, a comment in ip22zilog.c is badly needed. Point 3 is left as an exercise for whoever feels like digging into ip22zilog :) These are the main obvious differences between ip22zilog and sunzilog. Newer versions of sunzilog (Linus's git tree as of today) are more close to ip22zilog as the sbus_{write,read}b have been changed into simple {write,read}b, which shrinks the diff by a fair amount. Resyncing both drivers should be doable in a few hours time now for someone familiar with the IP22 Zilog hardware. Signed-off-by: Julien BLACHE <jb@jblache.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-09[SERIAL] dz: Fix compilation errorMartin Michlmayr
Fix the following compilation error in the dz serial driver that got introduced with the "kernel console should send CRLF not LFCR" change. CC drivers/serial/dz.o drivers/serial/dz.c: In function 'dz_console_putchar': drivers/serial/dz.c:679: error: 'uport' undeclared (first use in this function) drivers/serial/dz.c:679: error: (Each undeclared identifier is reported only once drivers/serial/dz.c:679: error: for each function it appears in.) Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-05[ARM] 3710/1: AT91 Serial: Use GPIO APIAndrew Victor
Patch from Andrew Victor The AT91RM9200 errata work-around should be using the GPIO API and not accessing the PIO registers directly. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-03Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Ensure 8250_pci quirks are not marked __devinit [SERIAL] Convert fifosize to an unsigned int
2006-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: add defconfig for Freescale MPC8349E-mITX board powerpc: Add base support for the Freescale MPC8349E-mITX eval board Documentation: correct values in MPC8548E SEC example node [POWERPC] Actually copy over i8259.c to arch/ppc/syslib this time [POWERPC] Add new interrupt mapping core and change platforms to use it [POWERPC] Copy i8259 code back to arch/ppc [POWERPC] New device-tree interrupt parsing code [POWERPC] Use the genirq framework [PATCH] genirq: Allow fasteoi handler to retrigger disabled interrupts [POWERPC] Update the SWIM3 (powermac) floppy driver [POWERPC] Fix error handling in detecting legacy serial ports [POWERPC] Fix booting on Momentum "Apache" board (a Maple derivative) [POWERPC] Fix various offb and BootX-related issues [POWERPC] Add a default config for 32-bit CHRP machines [POWERPC] fix implicit declaration on cell. [POWERPC] change get_property to return void *
2006-07-03[PATCH] lockdep: annotate serialIngo Molnar
Teach special (dual-initialized) locking code to the lock validator. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] SERIAL: allow shared 8250_pnp interruptsBjorn Helgaas
PNP devices can use shared interrupts, so check to see whether we'll need SA_SHIRQ for request_irq(). The builtin PDH UART on the HP rx8640 is an example of an ACPI/PNP device that uses a shareable level-triggered, active-low interrupt. The interrupt can be shared in very large I/O configurations or by artificially lowering IA64_DEF_LAST_DEVICE_VECTOR. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Li Shaohua <shaohua.li@intel.com> Cc: Len Brown <len.brown@intel.com> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[SERIAL] Ensure 8250_pci quirks are not marked __devinitRussell King
The 8250_pci quirks must not be marked __devinit since they may be used from parport_serial. We only really need to mark those which might be used by cards recognised by parport_serial, but that wouldn't allow static checking. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-03[POWERPC] Add new interrupt mapping core and change platforms to use itBenjamin Herrenschmidt
This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-02[PATCH] irq-flags: serial: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02[SERIAL] Convert fifosize to an unsigned intRussell King
Some UARTs have more than 255 bytes of FIFO, which can't be represented by an unsigned char. Change the kernel's internal structure to be an unsigned int, but still export an unsigned char via the TIOCGSERIAL ioctl. If the TIOCSSERIAL ioctl provides a fifo size of 0, assume this means "don't change" otherwise we'll corrupt the larger fifo sizes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Kill sun4v virtual device layer. [SERIAL] sunhv: Convert to of_driver layer. [SPARC64]: Mask out top 8-bits in physical address when building resources. [SERIAL] sunsu: Missing return statement in su_probe().
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30[SERIAL] sunhv: Convert to of_driver layer.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30[SERIAL] sunsu: Missing return statement in su_probe().David S. Miller
If we have a keyboard/mouse port, don't drop through to calling sunsu_autoconfig(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30[PATCH] pcmcia: another ID for serial_cs.cDominik Brodowski
Add an ID for "GlobeTrotter" cards which need a CIS override Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30typo fixes: occuring -> occurringAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29[SERIAL] sunsab: Fix section mis-match errors.David S. Miller
sunsab_init_one() needs to be __devinit, not __init Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SERIAL] sunsab: Convert to of_driver framework.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SERIAL] sun{su,zilog}: Add missing MODULE_*() niceties.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SERIAL] sunsu: Convert to of_driver framework.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SERIAL] sunzilog: Fix bugs in device deregristration.David S. Miller
1) Need to unregister 2 ports per of_device. 2) Need to of_iounmap() 1 mapping per of_device. 3) Need to free up the IRQ only after all devices have been unregistered. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29[SERIAL] sunzilog: Convert to of_driver.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>