aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2007-08-03serial: fix 8250 early console setupDaniel Ritz
the early setup function serial8250_console_early_setup() can be called from non __init code (eg. hotpluggable serial ports like serial_cs) so remove the __init from the call chain to avoid crashes. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31sb1250-duart: __maybe_unused, etc. fixesMaciej W. Rozycki
This is a set of small fixes addressing points raised with the original driver submission. In particular, __maybe_unused is used rather than a local hack and sbd_ops is made const. Additionally I have made two local string variables automatic as rodata space was wasted for pointers unnecessarily. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: MPSC: Fix coding style and whitespace issuesMark A. Greer
Fix up mpsc.c to be aligned with Documentation/CodingStyle. Also fix up some whitespace issues. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: MPSC: Remove duplicate SUPPORT_SYSRQ definitionMark A. Greer
Remove the duplicate definition of SUPPORT_SYSRQ in mpsc driver. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: MPSC: Stop rx engine when CREAD clearedStephane Chazelas
Currently, the MPSC driver doesn't stop recieving characters when the CREAD flag in termios->c_cflag is cleared. It should. Also, only start receiving if its not already started. Signed-off-by: Stephane Chazelas <stephane@artesyncp.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: MPSC: Remove race between Rx stop & restartCarlos Sanchez
The patch in commit ID f7232056bff5fe2d3bfeab35252a66ebaeb5bbde stops (aborts) the MPSC's receive engine just before restarting it. Unfortunately, it doesn't wait for the abort to complete before restarting it which creates a race between the abort and the restart. If the restart occurs first, the in-progress abort stops it again and the rx engine remains stopped. Instead, do the abort when the SDMA engine is being stopped. Make sure to wait for the abort to complete before continuing. Signed-off-by: Carlos Sanchez <carlos.sanchez@gecoinc.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: fix vr41xx_siu serial console supportYoichi Yuasa
The serial console can select only SERIAL_VR41XX=y. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: fix vr41xx_siu interface selectYoichi Yuasa
only PORT_VR41XX_SIU can select interface. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: fix section mismatch vr41xx_siuYoichi Yuasa
Fix section mismatch vr41xx_siu. WARNING: drivers/built-in.o(.text+0x2ce4c): Section mismatch: reference to .init.text:uart_parse_options (between 'siu_console_setup' and 'siu_request_port') WARNING: drivers/built-in.o(.text+0x2ce70): Section mismatch: reference to .init.text:uart_set_options (between 'siu_console_setup' and 'siu_request_port') Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31DDB5477: remove driver bits of supportYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31revert "x86, serial: convert legacy COM ports to platform devices"Andrew Morton
Revert 7e92b4fc345f5b6f57585fbe5ffdb0f24d7c9b26. It broke Sébastien Dugué's machine and Jeff said (persuasively) This seems like it will break decades-long-working stuff, in favor of breaking new ground in our favorite area, "trusting the BIOS." It's just not worth it for serial ports, IMO. Serial ports are something that just shouldn't break at this late stage in the game. My new Intel platform boxes don't even have serial ports, so I question the value of messing with serial port probing even more... because... just wait a year, and your box won't have a serial port either! :) I certainly don't object to the use of platform devices (or isa_driver), but the probe change seems questionable. That's sorta analagous to rewriting the floppy driver probe routine. Sure you could do it... but why risk all that damage and go through debugging all over again? It seems clear from this report that we cannot, should not, trust BIOS for something (a) so simple and (b) that has been working for over a decade. Much discussion ensued and we've decided to have another go at all of this. Cc: Sébastien Dugué <sebastien.dugue@bull.net> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial_txx9: fix printk format mismatchAtsushi Nemoto
Since the commit 4f640efb3170dbcf99a37a3cc99060647b95428c, "%lx" is not suitable for p->mapbase (resource_size_t) in 32-bit. This patch fixes a compiler warning caused by the mismatch. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23: sh: Fix fs.h removal from mm.h regressions. sh: fix get_wchan() for SH kernels without framepointers sh: arch/sh/boot - fix shell usage rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts. sh: remove support for sh7300 and solution engine 7300 sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies. sh: Kill off virt_to_bus()/bus_to_virt(). sh: sh-sci - fix SH7708 support sh: Restrict DSP support to specific CPUs. sh: Silence sq compile warning on sh4 nommu. sh: Kill the rest of the SE73180 cruft. sh: remove support for sh73180 and solution engine 73180 sh: remove old broken pint code sh: Reclaim beginning of P3 space for vmalloc area. sh: Fix Dreamcast DMA issues. sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: sh-sci - fix SH7708 supportMagnus Damm
This patch makes sure the sci serial port driver compiles for sh7708. The approach taken is to treat the sh7708 as a subset of sh7706, sh7707, sh7709. sh7708 is very similar to sh7706, sh7707, sh7709, but only equipped with a single sci port. The platform data in setup-sh770x.c already limits the number of serial ports for sh7708 to a single one, so the non-existing scif ports pointed out in sh-sci.h will remain unused in case of sh7708. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25m68knommu: fix workqueues in 68328 serial driverGreg Ungerer
Fix workqueues in 68328 serial driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25m68knommu: remove legacy power managament from 68328 serial driverGreg Ungerer
Remove the legacy power management code from the 68328 serial driver. It is not used, and there is no current kernel support for power management on the 68328. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25sh: remove support for sh73180 and solution engine 73180Magnus Damm
This patch removes old dead code: - kill off sh73180 cpu support - get rid of broken solution engine 73180 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-24Use resource_size_t for serial port IO addressesJosh Boyer
At present, various parts of the serial code use unsigned long to define resource addresses. This is a problem, because some 32-bit platforms have physical addresses larger than 32-bits, and have mmio serial uarts located above the 4GB point. This patch changes the type of mapbase in both struct uart_port and struct plat_serial8250_port to resource_size_t, which can be configured to be 64 bits on such platforms. The mapbase in serial_struct can't safely be changed, because that structure is user visible. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (60 commits) [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410 [ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers [ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h [ARM] 4521/2: S3C: Reorganise VA mapping headers [ARM] 4520/1: S3C: Remove old VA values from static map [ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h [ARM] 4518/1: S3C: Rename watchdog configuration options [ARM] 4517/1: S3C: Fix debug macros for ARM926 output [ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926 [ARM] 4515/1: S3C: Move uncompress code to plat-s3c [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT [ARM] 4512/1: S3C: rename the debug macros for per-cpu updates [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support [ARM] 4510/1: S3C: split debug-macro support into plat-s3c [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c [ARM] 4461/1: MXC platform and i.MX31ADS core support [ARM] 4507/1: pxa2xx clock_event_device [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later ...
2007-07-22Merge branches 'at91', 'imx', 'iop', 'ixp', 'ks8695', 'misc', 'ns9xxx', ↵Russell King
'pxa' and 's3c' into devel
2007-07-22[ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3cBen Dooks
This patch moves items of the s3c24xx support into a new plat-s3c directory for items that use the s3c24xx support but are not directly s3c24xx compatible, such as the s3c2400 and s3c6400. git mv commands: git mv include/asm-arm/arch-s3c2410/iic.h include/asm-arm/plat-s3c/iic.h git mv include/asm-arm/arch-s3c2410/nand.h include/asm-arm/plat-s3c/nand.h git mv include/asm-arm/arch-s3c2410/regs-iic.h include/asm-arm/plat-s3c/regs-iic.h git mv include/asm-arm/arch-s3c2410/regs-nand.h include/asm-arm/plat-s3c/regs-nand.h git mv include/asm-arm/arch-s3c2410/regs-rtc.h include/asm-arm/plat-s3c/regs-rtc.h git mv include/asm-arm/arch-s3c2410/regs-serial.h include/asm-arm/plat-s3c/regs-serial.h git mv include/asm-arm/arch-s3c2410/regs-timer.h include/asm-arm/plat-s3c/regs-timer.h git mv include/asm-arm/arch-s3c2410/regs-watchdog.h include/asm-arm/plat-s3c/regs-watchdog.h Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[SPARC]: Fix serial console device detection.David S. Miller
The current scheme works on static interpretation of text names, which is wrong. The output-device setting, for example, must be resolved via an alias or similar to a full path name to the console device. Paths also contain an optional set of 'options', which starts with a colon at the end of the path. The option area is used to specify which of two serial ports ('a' or 'b') the path refers to when a device node drives multiple ports. 'a' is assumed if the option specification is missing. This was caught by the UltraSPARC-T1 simulator. The 'output-device' property was set to 'ttya' and we didn't pick upon the fact that this is an OBP alias set to '/virtual-devices/console'. Instead we saw it as the first serial console device, instead of the hypervisor console. The infrastructure is now there to take advantage of this to resolve the console correctly even in multi-head situations in fbcon too. Thanks to Greg Onufer for the bug report. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20[ARM] 4481/1: Fix a bug when i.MX is compiled as a moduleSascha Hauer
Fix the unregistration order in the i.MX serial driver Signed-off-by: Sreekrishnan Venkateswaran <krishhna@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18zs: move to the serial subsystemMaciej W. Rozycki
This is a reimplementation of the zs driver for the serial subsystem. Any resemblance to the old driver is purely coincidential. ;-) I do hope I got the handling of modem lines right -- better do not tackle me about the issue unless you feel too good... Any users of the old driver: please note the numbers of the serial lines have now been swapped, i.e. ttyS0 <-> ttyS1 and ttyS2 <-> ttyS3. It has to do with the modem lines mentioned above; basically the port A in a given chip has to be initialised before the port B if you want to use the latter as the serial console (which is usually the case), as operations on modem lines of the serial line associated with the port B access both ports (see the comment at the top of the driver for the details of wiring used). Please update your scripts. This is also the reason each SCC now requests an IRQ once only (as seen in "/proc/interrupts") -- the handler takes care of both ports at once as the line associated with the port B has to take status update interrupts from both ports (and yet the line of the port A takes its own for itself too). The old driver never got it right... Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18serial: add early_serial_setup() back to header fileYinghai Lu
early_serial_setup was removed from serial.h, but forgot to put in serial_8250.h Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17sb1250-duart.c: SB1250 DUART serial supportMaciej W. Rozycki
This is a driver for the SB1250 DUART, a dual serial port implementation included in the Broadcom family of SOCs descending from the SiByte SB1250 MIPS64 chip multiprocessor. It is a new implementation replacing the old-fashioned driver currently present in the linux-mips.org tree. It supports all the usual features one would expect from a(n asynchronous) serial driver, including modem line control (as far as hardware supports it -- there is edge detection logic missing from the DCD and RI lines and the driver does not implement polling of these lines at the moment), the serial console, BREAK transmission and reception, including the magic SysRq. The receive FIFO threshold is not maintained though. The driver was tested with a SWARM board which uses a BCM1250 SOC (which is dual MIPS64 CMP) and has both ports of the single DUART implemented wired externally. Both were tested. Testing included using the ports as terminal lines at 1200bps (which is the ports minimum), 115200bps and a couple of random speeds inbetween. The modem lines were verified to operate correctly. No testing was performed with a use as a network interface, like with SLIP or PPP. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits) [POWERPC] Create add_rtc() function to enable the RTC CMOS driver [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number [POWERPC] xilinxfb: Parameterize xilinxfb platform device registration [POWERPC] Oprofile support for Power 5++ [POWERPC] Enable arbitary speed tty ioctls and split input/output speed [POWERPC] Make drivers/char/hvc_console.c:khvcd() static [POWERPC] Remove dead code for preventing pread() and pwrite() calls [POWERPC] Remove unnecessary #undef printk from prom.c [POWERPC] Fix typo in Ebony default DTS [POWERPC] Check for NULL ppc_md.init_IRQ() before calling [POWERPC] Remove extra return statement [POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED [POWERPC] pasemi: Rename platform [POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports [POWERPC] Add __read_mostly support for powerpc [POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane [POWERPC] Create a dummy zImage if no valid platform has been selected [POWERPC] PS3: Bootwrapper support. [POWERPC] powermac i2c: Use mutex [POWERPC] Schedule removal of arch/ppc ... Fixed up conflicts manually in: Documentation/feature-removal-schedule.txt arch/powerpc/kernel/pci_32.c arch/powerpc/kernel/pci_64.c include/asm-powerpc/pci.h and asked the powerpc people to double-check the result..
2007-07-16[SERIAL] SUNHV: Fix jerky console on LDOM guests.David S. Miller
Mixing putchar() and write() hvcalls does not work %100 correctly. But we should be using write() all the time if we can, even from ->start_tx(), anyways. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (26 commits) [SPARC64]: Fix UP build. [SPARC64]: dr-cpu unconfigure support. [SERIAL]: Fix console write locking in sparc drivers. [SPARC64]: Give more accurate errors in dr_cpu_configure(). [SPARC64]: Clear cpu_{core,sibling}_map[] in smp_fill_in_sib_core_maps() [SPARC64]: Fix leak when DR added cpu does not bootup. [SPARC64]: Add ->set_affinity IRQ handlers. [SPARC64]: Process dr-cpu events in a kthread instead of workqueue. [SPARC64]: More sensible udelay implementation. [SPARC64]: SMP build fixes. [SPARC64]: mdesc.c needs linux/mm.h [SPARC64]: Fix build regressions added by dr-cpu changes. [SPARC64]: Unconditionally register vio_bus_type. [SPARC64]: Initial LDOM cpu hotplug support. [SPARC64]: Fix setting of variables in LDOM guest. [SPARC64]: Fix MD property lifetime bugs. [SPARC64]: Abstract out mdesc accesses for better MD update handling. [SPARC64]: Use more mearningful names for IRQ registry. [SPARC64]: Initial domain-services driver. [SPARC64]: Export powerd facilities for external entities. ...
2007-07-16Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (68 commits) sh: sh-rtc support for SH7709. sh: Revert __xdiv64_32 size change. sh: Update r7785rp defconfig. sh: Export div symbols for GCC 4.2 and ST GCC. sh: fix race in parallel out-of-tree build sh: Kill off dead mach.c for hp6xx. sh: hd64461.h cleanup and added comments. sh: Update the alignment when 4K stacks are used. sh: Add a .bss.page_aligned section for 4K stacks. sh: Don't let SH-4A clobber SH-4 CFLAGS. sh: Add parport stub for SuperIO ports. sh: Drop -Wa,-dsp for DSP tuning. sh: Update dreamcast defconfig. fb: pvr2fb: A few more __devinit annotations for PCI. fb: pvr2fb: Fix up section mismatch warnings. sh: Select IPR-IRQ for SH7091. sh: Correct __xdiv64_32/div64_32 return value size. sh: Fix timer-tmu build for SH-3. sh: Add cpu and mach links to CLEAN_FILES. sh: Preliminary support for the SH-X3 CPU. ...
2007-07-16sn_console section mismatch warningJes Sorensen
Do not mark sn_sal_console_setup as __init since it's referenced from non init data structures. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-1668360serial: remove broken optimisationAlan Cox
Remove the broken 'no termios change' optimisation for this driver. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16atmel_serial: fix break handlingHaavard Skinnemoen
The RXBRK field in the AT91/AT32 USART status register has the following definition according to e.g. the AT32AP7000 data sheet: RXBRK: Break Received/End of Break 0: No Break received or End of Break detected since the last RSTSTA. 1: Break Received or End of Break detected since the last RSTSTA. Thus, for each break, the USART sets the RXBRK bit twice. This patch modifies the driver to report the break event to the serial core only once by keeping track of whether a break condition is currently active. The break_active flag is reset as soon as a character is received, so even if we miss the start-of-break interrupt this should do the right thing. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ivan Kuten <ivan.kuten@promwad.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Update zilog timeoutThiemo Seufer
Update zilog timeout, thanks Peter Fuerst. Signed-off-by: Thiemo Seufer <ths@networkno.de> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Peter Fuerst <pf@net.alphadv.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16serial: convert early_uart to earlycon for 8250Yinghai Lu
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and include/asm-x86_64/serial.h. the serial8250_ports need to be probed late in serial initializing stage. the console_init=>serial8250_console_init=> register_console=>serial8250_console_setup will return -ENDEV, and console ttyS0 can not be enabled at that time. need to wait till uart_add_one_port in drivers/serial/serial_core.c to call register_console to get console ttyS0. that is too late. Make early_uart to use early_param, so uart console can be used earlier. Make it to be bootconsole with CON_BOOT flag, so can use console handover feature. and it will switch to corresponding normal serial console automatically. new command line will be: console=uart8250,io,0x3f8,9600n8 console=uart8250,mmio,0xff5e0000,115200n8 or earlycon=uart8250,io,0x3f8,9600n8 earlycon=uart8250,mmio,0xff5e0000,115200n8 it will print in very early stage: Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled later for console it will print: console handover: boot [uart0] -> real [ttyS0] Signed-off-by: <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16serial: assert DTR for serial console devicesYinghai Lu
Some RS-232 devices require DTR to be asserted before they can be used. DTR is normally asserted in uart_startup() when the port is opened. But we don't actually open serial console ports, so assert DTR when the port is added. BTW: earlyprintk and early_uart are hard coded to set DTR/RTS. rmk says The only issue I can think of is the possibility for an attached modem to auto-answer or maybe even auto-dial before the system is ready for it to do so. Might have an undesirable cost implication for some running with such a setup. Apart from that, I can't think of any other side effect of this specific patch. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16[SERIAL]: Fix console write locking in sparc drivers.David S. Miller
Mirror the logic in 8250 for proper console write locking when SYSRQ is triggered or an OOPS is in progress. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2007-07-12Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Rename PC speaker code [MIPS] Don't use genrtc. [MIPS] Remove unused time.c for swarm [MIPS] Sparse: Use NULL for pointer [MIPS] Fix a sparse warning in arch/mips/pci/pci.c [MIPS] SMTC: Interrupt mask backstop hack [MIPS] separate platform_device registration for VR41xx RTC [MIPS] Separate platform_device registration for VR41xx GPIO [MIPS] MIPSsim: Fix build. [MIPS] separate platform_device registration for VR41xx serial interface [MIPS] Include cacheflush.h in uncache.c [MIPS] Cleanup tlbdebug.h [MIPS] Change names of local variables to silence sparse (part 2) [MIPS] Workaround for a sparse warning in include/asm-mips/io.h [MIPS] RM: Use only phyiscal address for 82596 and 53c710 [MIPS] Hydrogen3: Remove remaining bits of code. [MIPS] DEC: Fix modpost warning. Revert "[MIPS] DEC: Fix modpost warning." [MIPS] Fix resume for 64K page size on R4000 class processors.
2007-07-12[MIPS] separate platform_device registration for VR41xx serial interfaceYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12Blackfin serial driver: supporting BF548-EZKIT serial portRoy Huang
Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11Merge branch 'for-2.6.23' into mergePaul Mackerras
2007-07-10[POWERPC] of_serial: add port type checkingIshizaki Kou
Currently, of_serial driver supports only 8250 compatible ports, but prepares that others can easily be added. Yet unregister routine assumes port is 8250. This corrects unregister routine to check port type. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10[POWERPC] of_serial: Ignore unknown serial portIshizaki Kou
Current of_serial driver assumes unknown serial port to be 8250. But this behavior may cause fatal problems when the serial port is not 8250. This corrects probe routine to ignore unknown serial port. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10[POWERPC] CPM_UART: Use inline function form of eieioKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-08PCMCIA-NETDEV : add new ID of lan&modem multifunction cardKomuro
fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-28serial: clear proper MPSC interrupt cause bitsJay Lubomirski
The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the interrupt for both controllers instead of just the one its supposed to. This can result in the other controller appearing to hang because its interrupt was effectively lost. So, don't clear the interrupt cause bits for both MPSC controllers when clearing the interrupt for one of them. Just clear the one that is supposed to be cleared. Signed-off-by: Jay Lubomirski <jaylubo@motorola.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>