aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-09Merge branch 'for-rmk' of git://source.mvista.com/git/linux-davinci-2.6.gitRussell King
Merge branch 'davinci' into devel
2008-10-09Merge branch 'pxa-all' into develRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/include/mach/hardware.h arch/arm/mach-pxa/spitz.c
2008-10-09Merge branch 'ptebits' into develRussell King
Conflicts: arch/arm/Kconfig
2008-10-07Merge branches 'pxa-core' and 'pxa-machines' into pxa-allRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
2008-10-01[ARM] 5250/1: unbalanced enable_irq() for serial_ks8695.c fixDick Hollenbeck
The function ks8695uart_set_termios() would cause an unbalanced enable_irq() generated message to be printk()ed. This is because there was no book keeping support to remember if the calls to enable_irq() and disable_irq() were balanced for the modem control irq. Signed-off-by: Dick Hollenbeck <dick@softplc.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23atmel_serial: update the powersave handler to match serial coreAnti Sullin
This problem seems to be unnoticed so far: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2 has changed the serial core behavior to not to suspend the port if the device is enabled as a wakeup source. If the AT91 system goes to slow clock mode, the port should be suspended always and the clocks should be switched off. The patch attached updates the atmel_serial driver to match the changes in serial core. Also, the interrupts are disabled when the clock is disabled. If we disable the clock with interrupts enabled, an interrupt may get stuck. If this is the DBGU interrupt, this blocks the OR logic at system controller and thus all other sysc interrupts. Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Michael Trimarchi <trimarchimichael@yahoo.it> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-13Merge branch 'for-rmk' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git
2008-09-09[ARM] 5244/1: Add hardware CTSRTS flow control to pxa serial driverRobert Jarzmik
Adds hardware CTSRTS control for pxa serial devices through termios controls. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-028250: improve workaround for UARTs that don't re-assert THRE correctlyWill Newton
Recent changes to tighten the check for UARTs that don't correctly re-assert THRE (01c194d9278efc15d4785ff205643e9c0bdcef53: "serial 8250: tighten test for using backup timer") caused problems when such a UART was opened for the second time - the bug could only successfully be detected at first initialization. For users of this version of this particular UART IP it is fatal. This patch stores the information about the bug in the bugs field of the port structure when the port is first started up so subsequent opens can check this bit even if the test for the bug fails. David Brownell: "My own exposure to this is that the UART on DaVinci hardware, which TI allegedly derived from its original 16550 logic, has periodically gone from working to unusable with the mainline 8250.c ... and back and forth a bunch. Currently it's "unusable", a regression from some previous versions. With this patch from Will, it's usable." Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Alex Williamson <alex.williamson@hp.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-02imx serial: fix rts handling for non imx1 based hardwareMarc Kleine-Budde
The interrupt handler for muxed interrupts (imx2/imx3) was calling the rts handling subroutine if the RTSS bit was set. (Which indicates the status of the RTS line), leading to an interrupt flood on RTS bit low. This patch fixes the problem by looking at the RTSD bit instead, indicating a change in the RTS line. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02imx serial: set RXD mux bit on i.MX27 and i.MX31Marc Kleine-Budde
RX in i.MX27 and i.MX31 UART lines does not work unless the "RXD Muxed Input Select" bit is set on i.MX27 and i.MX31 processors. This patch sets the missing RXD mux bit in the UCR3 register. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02i.MX serial: fix init failureDarius Augulis
Adds extra "out" label to probe function after calling .init form platform data. Because .init can return error number caused by gpio request fail. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-27Blackfin arch: move include/asm-blackfin header files to arch/blackfinBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-16Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (38 commits) [ARM] 5191/1: ARM: remove CVS keywords [ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified [ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16 [ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD [ARM] 5198/1: PalmTX: PCMCIA fixes [ARM] Fix a pile of broken watchdog drivers [ARM] update mach-types [ARM] 5196/1: fix inline asm constraints for preload [ARM] 5194/1: update .gitignore [ARM] add proc-macros.S include to proc-arm940 and proc-arm946 [ARM] 5192/1: ARM TLB: add v7wbi_{possible,always}_flags to {possible,always}_tlb_flags [ARM] 5193/1: Wire up missing syscalls [ARM] traps: don't call undef hook functions with spinlock held [ARM] 5183/2: Provide Poodle LoCoMo GPIO names [ARM] dma-mapping: provide sync_range APIs [ARM] dma-mapping: improve type-safeness of DMA translations [ARM] Kirkwood: instantiate the orion_spi driver in the platform code [ARM] prevent crashing when too much RAM installed [ARM] Kirkwood: Instantiate mv_xor driver [ARM] Orion: Instantiate mv_xor driver for 5182 ...
2008-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Handle stack trace attempts before irqstacks are setup. sparc64: Implement IRQ stacks. sparc: remove include of linux/of_device.h from asm/of_device.h sparc64: Fix recursion in stack overflow detection handling. sparc/drivers: use linux/of_device.h instead of asm/of_device.h sparc64: Don't MAGIC_SYSRQ ifdef smp_fetch_global_regs and support code.
2008-08-11sparc/drivers: use linux/of_device.h instead of asm/of_device.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-08Merge http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm ↵Ben Dooks
into for-rmk
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesRussell King
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-04cris: Fixup compile problemsAlan Cox
It now compiles with the tty changes but isn't tested (which has to be better than not compiling.. Closes bug #11218 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04blackfin: Fix compile failure in tty codeAlan Cox
Blackfin peers into the ldisc in an odd way for IRDA snooping which therefore got missed. Simple enough fix. Closes bug #11233 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits) mm/hugetlb.c must #include <asm/io.h> video: Fix up hp6xx driver build regressions. sh: defconfig updates. sh: Kill off stray mach-rsk7203 reference. serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression. sh: Move out individual boards without mach groups. sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h. sh: Allow SH-3 and SH-5 to use common headers. sh: Provide common CPU headers, prune the SH-2 and SH-2A directories. sh/maple: clean maple bus code sh: More header path fixups for mach dir refactoring. sh: Move out the solution engine headers to arch/sh/include/mach-se/ sh: I2C fix for AP325RXA and Migo-R sh: Shuffle the board directories in to mach groups. sh: dma-sh: Fix up dreamcast dma.h mach path. sh: Switch KBUILD_DEFCONFIG to shx3_defconfig. sh: Add ARCH_DEFCONFIG entries for sh and sh64. sh: Fix compile error of Solution Engine sh: Proper __put_user_asm() size mismatch fix. sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation. ...
2008-07-30Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/mm: Lockless get_user_pages_fast() for 64-bit (v3) powerpc: Don't use the wrong thread_struct for ptrace get/set VSX regs powerpc: Fix ptrace buffer size for VSX powerpc: Correctly hookup PTRACE_GET/SETVSRREGS for 32 bit processes ide/powermac: Fix use of uninitialized pointer on media-bay powerpc: Allow non-hcall return values for lparcfg writes ipmi/powerpc: Use linux/of_{device,platform}.h instead of asm powerpc/fsl: proliferate simple-bus compatibility to soc nodes Documentation: remove old sbc8260 board specific information cpm2: Rework baud rate generators configuration to support external clocks. powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC cpm_uart: Add generic clock API support to set baudrates cpm_uart: Modem control lines support powerpc: implement GPIO LIB API on CPM1 Freescale SoC. cpm2: Implement GPIO LIB API on CPM2 Freescale SoC. powerpc: Fix 8xx build failure powerpc: clean up the Book-E HW watchpoint support
2008-07-30remove drivers/serial/v850e_uart.cAdrian Bunk
The removal of drivers/serial/v850e_uart.c originally was in my v850 removal patch, but it seems it got lost somewhere. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-308250.c: port.lock is irq-safeBorislav Petkov
serial8250_startup() doesn't disable interrupts while taking the &up->port.lock which might race against the interrupt handler serial8250_interrupt(), which when entered, will deadlock waiting for the lock to be released. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Tested-by: Ingo Molnar <mingo@elte.hu> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30Merge commit 'kumar/kumar-next'Benjamin Herrenschmidt
2008-07-30serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.Paul Mundt
As noted by Manuel: Commit c63847a3621d2bac054f5709783860ecabd0ee7e ("sh: Add SCIF2 support for SH7763.") broke build with CONFIG_EARLY_PRINTK enabled for me (SH7760): CC arch/sh/kernel/early_printk.o /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c: In function 'scif_sercon_putc': /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c:84: error: implicit declaration of function 'sci_SCFDR_in' Move the SH7763 definitions out on their own, so they don't create additional confusion within the SH7760/SH7780/SH7785 block. Restore the deleted SCFDR definition for these parts. Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28cpm_uart: Add generic clock API support to set baudratesLaurent Pinchart
This patch introduces baudrate setting support via the generic clock API. When present the optional device tree clock property is used instead of fsl-cpm-brg. Platforms can then define complex clock schemes, to output the serial clock on an external pin for instance. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-28cpm_uart: Modem control lines supportLaurent Pinchart
This patch replaces the get_mctrl/set_mctrl stubs with modem control line read/write access through the GPIO lib. Available modem control lines are described in the device tree using GPIO bindings. The driver expect a GPIO pin for each of the CTS, RTS, DCD, DSR, DTR and RI signals. Unused control lines can be left out. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-28sh: Add SCIF2 support for SH7763.Nobuhiro Iwamatsu
SH7763 has 3 SCIF device. Current code supports SCIF0 and 1. SCIF0 and 1 are same register constitution, but only SCIF2 is different. I added support of SCIF2. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-24cpm1: don't send break on TX_STOP, don't interrupt RX/TX when adjusting ↵Nye Liu
termios parameters Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break character. The driver appears to properly re-initialize _brkcr when the SMC is restarted. Do not interrupt RX/TX when the termios is being adjusted; it results in corrupted characters appearing on the line. Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24serial: DZ11: avoid a hang at console switch-overMaciej W. Rozycki
Changes to the generic console support code that happened a while ago introduced a scenario where the initial console is used in parallel with the final console during a brief period when switching between the two is in progress. During that time a message about the switch-over is printed. With some combinations of chips, firmware and drivers, such as the DEC DZ11 clone used with the DECstation, a hang may happen because the firmware used for the initial console may not expect the state of the chip after it has been initialised by the driver. This is a workaround for the DZ11 which reuses the power-management callback to keep the transmitter of the line associated with the console enabled. It reflects the consensus reached in a discussion a while ago. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24serial: Z85C30: avoid a hang at console switch-overMaciej W. Rozycki
Changes to the generic console support code that happened a while ago introduced a scenario where the initial console is used in parallel with the final console during a brief period when switching between the two is in progress. During that time a message about the switch-over is printed. With some combinations of chips, firmware and drivers, such as the Zilog Z85C30 SCC used with the DECstation, a hang may happen because the firmware used for the initial console may not expect the state of the chip after it has been initialised by the driver. This is not a bug in the firmware, as some registers it would have to examine are write-only. This is a workaround for the Z85C30 which reuses the power-management callback to keep the transmitter of the line associated with the console enabled. It reflects the consensus reached in a discussion a while ago. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24serial: add support for a no-name 4 ports multiserial cardCatalin(ux) M BOIE
It is a no-name PCI card. I found no reference to a producer so I used "UNKNOWN_0x1584" as the name. Full lspci: 01:07.0 0780: 10b5:9050 (rev 01) Subsystem: 10b5:1584 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- \ ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- \ DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 1: I/O ports at ec00 [size=128] Region 2: I/O ports at e480 [size=32] Region 3: I/O ports at e400 [size=8] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA \ PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] #06 [0080] Capabilities: [4c] Vital Product Data After: 0000:01:07.0: ttyS4 at I/O 0xe480 (irq = 10) is a 16550A 0000:01:07.0: ttyS5 at I/O 0xe488 (irq = 10) is a 16550A 0000:01:07.0: ttyS6 at I/O 0xe490 (irq = 10) is a 16550A 0000:01:07.0: ttyS7 at I/O 0xe498 (irq = 10) is a 16550A Signed-off-by: Catalin(ux) M BOIE <catab@embedromix.ro> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-248250: fix break handling for Intel 82571Aristeu Rozanski
Intel 82571 has a "Serial Over LAN" feature that doesn't properly implements the receiving of break characters. When a break is received, it doesn't set UART_LSR_DR and unless another character is received, the break won't be received by the application. Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24serial/8250_gsc.c: add MODULE_LICENSEAdrian Bunk
This patch adds the missing MODULE_LICENSE("GPL"). Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24remove the v850 portAdrian Bunk
Trying to compile the v850 port brings many compile errors, one of them exists since at least kernel 2.6.19. There also seems to be noone willing to bring this port back into a usable state. This patch therefore removes the v850 port. If anyone ever decides to revive the v850 port the code will still be available from older kernels, and it wouldn't be impossible for the port to reenter the kernel if it would become actively maintained again. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23kgdb: kgdboc console poll hooks for mpsc uartJason Wessel
Add in console polling hooks for the mpsc uart for use with kgdb and kgdboc. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-07-23kgdb: kgdboc console poll hooks for cpm uartJason Wessel
Add in console polling hooks for the cpm uart for use with kgdb and kgdboc. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: galak@kernel.crashing.org
2008-07-22port_fixups: Fix ups for tty port changesAlan Cox
I missed the cpm_uart one. Thanks to Kumar Gala for reporting it. A double check found samsung also needed fixing up. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22serial: 8250: fix shared interrupts issues with SMP and RT kernelsAnton Vorontsov
With SMP kernels _irqsave spinlock disables only local interrupts, while the shared serial interrupt could be assigned to the CPU that is not currently starting up the serial port. This might cause issues because serial8250_startup() routine issues IRQ-triggering operations before registering the port in the IRQ chain (though, this is fine to do and done explicitly because we don't want to process any interrupts on the port startup). With RT kernels and preemptable hardirqs, _irqsave spinlock does not disable local hardirqs, and the bug could be reproduced much easily: $ cat /dev/ttyS0 & $ cat /dev/ttyS1 irq 42: nobody cared (try booting with the "irqpoll" option) Call Trace: [C0475EB0] [C0008A98] show_stack+0x4c/0x1ac (unreliable) [C0475EF0] [C004BBD4] __report_bad_irq+0x34/0xb8 [C0475F10] [C004BD38] note_interrupt+0xe0/0x308 [C0475F50] [C004B09C] thread_simple_irq+0xdc/0x104 [C0475F70] [C004B3FC] do_irqd+0x338/0x3c8 [C0475FC0] [C00398E0] kthread+0xf8/0x100 [C0475FF0] [C0011FE0] original_kernel_thread+0x44/0x60 handlers: [<c02112c4>] (serial8250_interrupt+0x0/0x138) Disabling IRQ #42 After this, all serial ports on the given IRQ are non-functional. To fix the issue we should explicitly disable shared IRQ before issuing any IRQ-triggering operations. I also changed spin_lock_irqsave to the ordinary spin_lock, since it seems to be safe: chain does not contain new port (yet), thus nobody will interfere us from the ISRs. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22tty: rework break handlingAlan Cox
Some hardware needs to do break handling itself and may have partial support only. Make break_ctl return an error code. Add a tty driver flag so you can indicate driver hardware side break support. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22ttydev: Fix up compile failures in the PPC buildAlan Cox
Fix up a couple of reported merge problems Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20atmel_serial: Fix tty_port breakageHaavard Skinnemoen
The tty pointer has been moved into a tty_port field, so we need to use ->info->port.tty instead of just ->info->tty. Fixes these build errors: David Brownell <david-b@pacbell.net> wrote: > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring': > drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma': > drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_startup': > drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty' > make[2]: *** [drivers/serial/atmel_serial.o] Error 1 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Fix compile errors in SGI console drivers (linux-next tree)Takashi Iwai
The below is the patch to replace blindly all possible places, including Jack's fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de> (Reviewed and checked rather than blindly added) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20- Fix compile errors in SGI console drivers (linux-next tree)Jack Steiner
Fix compile errors in SGI console drivers caused by changes to the tty_port structures in the linux-next tree. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ttydev: fix pamc_zilog for tty pointer moveStephen Rothwell
Today's linux-next build (powerpc allyesconfig) failed like this: drivers/serial/pmac_zilog.c: In function 'pmz_receive_chars': drivers/serial/pmac_zilog.c:245: error: 'struct uart_info' has no member named 'tty' drivers/serial/pmac_zilog.c:250: error: 'struct uart_info' has no member named 'tty' I applied the patch below (which builds but may, or may not, be correct). -- Cheers, Stephen Rothwell sfr@canb.auug.org.au http://www.canb.auug.org.au/~sfr/ Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ttydev: fix pamc_zilog for tty pointer moveStephen Rothwell
Today's linux-next build (sparc64 defconfig) failed like this: drivers/serial/sunhv.c: In function `receive_chars': drivers/serial/sunhv.c:188: error: structure has no member named `tty' drivers/serial/sunsu.c: In function `receive_chars': drivers/serial/sunsu.c:314: error: structure has no member named `tty' drivers/serial/sunsab.c: In function `receive_chars': drivers/serial/sunsab.c:121: error: structure has no member named `tty' I applied the following patch (which, again, may not be correct). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 20:26:54 +0000