aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2006-01-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2006-01-07Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07Merge with Linus' kernel.Russell King
2006-01-07[ARM] Move AMBA include files to include/linux/amba/Russell King
Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-06[PATCH] ppc32/serial: Change mpc52xx_uart.c to use the Low Density Serial ↵Sylvain Munaut
port major Before this patch we were just using the "classic" /dev/ttySx devices. However when another on the system is loaded that uses those (like drivers for serial PCMCIA), that creates a conflict for the minors. Therefore, we now use /dev/ttyPSC[0:5] (note the 0-based numbering !) with some minors we've been assigned in the "Low Density Serial port major" Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32/serial: Fix compiler errors with GCC 4.x in mpc52xx_uart.cSylvain Munaut
Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe ↵Dominik Brodowski
callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: remove dev_list from driversDominik Brodowski
The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callbackDominik Brodowski
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] pcmcia: new suspend coreDominik Brodowski
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[SERIAL] 8520_pci: build fixAndrew Morton
_INLINE_ went away. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[SERIAL] Remove _INLINE_Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[SERIAL] Move interrupt-time spinlocking inside serial8250_handle_port()Russell King
All call sites for serial8250_handle_port() acquired the port spinlock and released it afterwards. This is a needless duplication of code. Move the spinlocking inside serial8250_handle_port(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[SERIAL] Use uart_match_port() to find a matching port in find_port()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[SERIAL] Fix matching of MMIO portsBenjamin Herrenschmidt
The function uart_match_port() incorrectly compares the ioremap'd virtual addresses of ports instead of the physical address to find duplicate ports for MMIO based UARTs. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[SERIAL] Add support for more Connect Tech PCI serial boardsGareth Howlett
I've also fixed the sort-ordering comments on this naming convention. Signed-off-by: Stuart MacDonald <stuartm@connecttech.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[Serial] Don't miss modem status changesRussell King
Reading the MSR register on 8250-compatible UARTs results in any modem status interrupts being cleared. To avoid missing any status changes, arrange for get_mctrl() to read the current status via check_modem_status(), which will process any pending state changes for us. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03[ARM] Remove clk_use()/clk_unuse()Russell King
It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-30[ARM] 3216/1: indent and typo in drivers/serial/pxa.cErik Hovland
Patch from Erik Hovland This patch provides two changes. An indent is supplied for an if/else clause so that it is more readable. An acronym is incorrectly typed as UER when it should be IER. Signed-off-by: Erik Hovland <erik@hovland.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-27[SERIAL] Fix AMBA PL011 sysrq character handlingRussell King
We only want the received character without the status bits for sysrq handling. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-22[SPARC]: introduce a SPARC Kconfig symbolAdrian Bunk
Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-07[SERIAL] 8250_pci: Remove redundant assignment, and mark fallthrough.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2005-11-28[SERIAL] mark several serial tables constArjan van de Ven
This patch marks a few serial data structures const, moving them to .rodata where they won't false-share cachelines with things that get written to. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-21[SERIAL] imx: Fix missed platform_driver_unregisterRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-19Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-11-19[SERIAL] Remove unused variable in sa1100.cRussell King
Since the spinlock was removed from sa1100_start_tx(), the "flags" variable becomes redundant. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-19[SERIAL] Fix status reporting with PL011 serial driverRussell King
The receiver status register reports latched error conditions, which must be cleared by writing to it. However, the data register reports unlatched conditions which are associated with the current character. Use the data register to interpret error status rather than the RSR. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-18[PARISC] Make Serial MUX depend on a specific bus type.Matthew Wilcox
Depend on GSC, not PARISC. Machines without GSC don't have a MUX. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-11-17[PARISC] Define port->timeout to fix a long msleep in mux.cRyan Bradetich
This commit is in response to a bug reported by Vesa on the irc channel a couple of weeks ago. The bug was that the console would apparently hang (not return) while using the mux console. The root cause of this bug is that bash (with readline support) makes a call to the tcsetattr() glibc function with the argument TCSADRAIN. This causes the serial core in the kernel use the uart_wait_until_sent() to be called. This function verifies the mux transmit queue is empty or calls the msleep_interruptable() with a calculated timeout value that is dependant upon the port->timeout variable. The real problem here is that the port->timeout was not defined so it was defaulted to 0 and the timeout calculation performs the following calculation: char_time = (port->timeout - HZ/50) / port->fifosize; where char_time is an unsigned long. Since the serial Mux does not use interrupts, the msleep_interruptable() function waits until the timeout has been reached ... and when the port->timeout < HZ/50 this timeout will be a long time. (I have validated that the console will eventually return ... but it takes quite a while for this to happen). This patch simply sets the port->timeout on the Mux to HZ/50 to avoid this long timeout period. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-11-17[PARISC] Compile fixups for serial/mux.cRyan Bradetich
This patch does the following: * Fixes compiler warnings. * Replaces a __raw_readl call with the existing macro. Signed-off-by: Ryan Bradetich <rbrad@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-11-13Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-11-13[PATCH] Update email address for KumarKumar Gala
Changed jobs and the Freescale address is no longer valid. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] move pm_register/etc. to CONFIG_PM_LEGACY, pm_legacy.hJeff Garzik
Since few people need the support anymore, this moves the legacy pm_xxx functions to CONFIG_PM_LEGACY, and include/linux/pm_legacy.h. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[SERIAL] Fix Bug 4900: S3 resume oops with irattach - Thinkpad A21mRussell King
If we fail to re-startup a serial port on resume, shut it down immediately and mark it as an error condition. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[SERIAL] sa1100_start_tx spinlock recursionFlorin Malita
The serial core aquires the port spinlock before calling port->ops->start_tx(), so sa1100_start_tx() shouldn't try to lock it again. BUG: spinlock recursion on CPU#0, init/1 lock: c0205f20, .magic: dead4ead, .owner: init/1, .owner_cpu: 0 [<c0022cdc>] (dump_stack+0x0/0x14) [<c00dc338>] (spin_bug+0x0/0xbc) [<c00dc6b0>] (_raw_spin_lock+0x0/0x170) r8 = 00000007 r7 = C02FE0070 [<c018a2a8>] (_spin_lock_irqsave+0x0/0x24) r4 = C0205F20 [<c0112110>] (sa1100_start_tx+0x0/0x40) r4 = C038C000 [<c010ee38>] (__uart_start+0x0/0x5c) [<c010ee94>] (uart_start+0x0/0x3 [<c010f1d0>] (uart_write+0x0/0xdc) [<c00fee34>] (write_chan+0x0/0x370 Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[SERIAL] Claim Wacom tablet device on HP tc1100 tabletBjorn Helgaas
Claim the WACF005 device. This is the pen display pointing device on the HP Compaq tc1100 Tablet PC. More information about using this device, including using it as an X pointer device: http://www.theory.bham.ac.uk/staff/schofield/linux/tc1100/ Christopher Kemp <ck231@cam.ac.uk> did the legwork of determining that the WACF005 is really just a plain old UART and doing an initial ACPI driver (before we had PNPACPI), and David Ludlow <dave@adsllc.com> confirmed that PNPACPI + the attached patch is now sufficient: pnp: Device 00:05 activated. ttyS4 at I/O 0x300 (irq = 4) is a 16550A Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[SERIAL] Fix mpc52xx_uart.cAndrey Volkov
Fix copy-paste bug in mpc52xx_uart.c (pdev<->dev) Signed-off-by: Andrey Volkov <avolkov@varma-el.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[SERIAL] dz: Use CKSEG1ADDR to setup mappings.Ralf Baechle
Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[SERIAL] dz: Nuke trailing whitespaceRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[SERIAL] don't disable xscale serial ports after autoconfigLennert Buytenhek
xscale-type UARTs have an extra bit (UUE) in the IER register that has to be written as 1 to enable the UART. At the end of autoconfig() in drivers/serial/8250.c, the IER register is unconditionally written as zero, which turns off the UART, and makes any subsequent printch() hang the box. Since other 8250-type UARTs don't have this enable bit and are thus always 'enabled' in this sense, it can't hurt to enable xscale-type serial ports all the time as well. The attached patch changes the autoconfig() exit path to see if the port has an UUE enable bit, and if yes, to write UUE=1 instead of just putting a zero into IER, using the same test as is used at the beginning of serial8250_console_write(). Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09[DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-07[SUNSU]: Do not mark sunsu_console_setup() __initDavid S. Miller
Sets off buildcheck warnings. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-07[PATCH] m68knommu: add 5208 ColdFire UART support to ColdFire serial driverGreg Ungerer
Add support for the Freescale 5208 processor UART's to the common ColdFire serial port code. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] serial: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_uninterruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] serial console: touch NMI watchdogAndrew Morton
Large console spews from IRQ or local_irq_disable() sections can cause the NMI watchdog to go off. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.Pantelis Antoniou
The offsets of the registers are in a different place, and some parts cannot handle a full set of modem control signals. Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.ocm> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-11-04[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfromRussell King
No longer maintained
2005-11-03[SERIAL] 8250_early.c passing 0 instead of NULLBen Dooks
Fix sparse warning about passing `0` to simple_strtoul() Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>