aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/atm/cxacru.c
AgeCommit message (Collapse)Author
2008-08-13USB: cxacru: Fix printk format flag in error messageSimon Arlott
"#%x" should have been "%#x" Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: AccessRunner: avoid unnecessary memsetChristophe Jaillet
Remove an explicit memset(.., 0, ...) to a variable allocated with kzalloc (i.e. 'card_info' array of the structure 'instance'). Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-10cxacru: treat firmware data as constDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-28drivers/usb annotations and fixesAl Viro
* endianness annotations * endianness fixes * missing get_unaligned/put_unaligned It's pretty much all over the place, changes to different files are independent. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Serial-parts-Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24USB: remove unnecessary type casting of urb->contextMing Lei
urb->context code cleanup Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: cxacru: Use appropriate logging for errorsSimon Arlott
When an error occurs, existing logging uses dbg() so the cause of a problem is hard to determine. Error conditions shouldn't only be properly reported with debugging enabled. A side effect of this change is that when an uninitialised device is started, a log message similar to the following is sent: cxacru 5-2:1.0: receive of cm 0x90 failed (-104) This is normal - the device did not respond so firmware will be loaded. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: unkill cxacru atm driverOliver Neukum
it seems like you overdid it a bit in your quest to clean up the use of urb->status. In this driver you read it the first thing, which means that you are in a race against URB completion you'll usually lose, returning -EINPROGRESS. This kills the driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19USB: atm: cxacru: clean up urb->status usageGreg Kroah-Hartman
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: cxacru: Cleanup sysfs attribute codeSimon Arlott
This changes the format of unknown status values to be less verbose and uses an array instead of several different snprintf calls. Since only enum values are assigned to it, poll_state is changed from int to enum. Use abs() for dB values instead of two almost identical return lines. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: cxacru: ignore error trying to start ADSL in atm_startSimon Arlott
The sysfs adsl_status attribute ignores (aside from returning -EIO to the user) any error sending a START/STOP command to the device and there is at least one firmware which never sends a response but appears to work regardless. Therefore atm_start should also continue if an error is received so that such firmware is usable. The official Conexant driver doesn't expect a reply either but this is for another device (E2 router) and a commonly used firmware does respond. Also, there is no point in changing -ECONNRESET to -ETIMEDOUT since nothing ever checks for either of these values. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: cxacru: create sysfs attributes in atm_start instead of bindSimon Arlott
Since usbatm doesn't set the usb_interface driver data until after calling bind and heavy_init, it would be NULL when the sysfs attributes are read. Reading the MAC address from atm_dev before atm_dev exists would have been be possible too. Calling create_device_file in atm_start will avoid this problem, and the data is useless until the first status poll runs. However, it must be ready before a status poll does a printk on line status change otherwise userspace could react before the files exist. For completeness I've moved remove_device_file to atm_stop so it's not called in unbind when it's not needed. There's no point starting ADSL if atm_start could still fail either. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cxacru: ADSL state managementSimon Arlott
The device has commands to start/stop the ADSL function, so this adds a sysfs attribute to allow it to be started/stopped/restarted. It also stops polling the device for status when the ADSL function is disabled. There are no problems with sending multiple start or stop commands, even with a fast loop of them the device still works. There is no need to protect the restart process from further user actions while it's waiting for 1.5s. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cxacru: export detailed device info through sysfsSimon Arlott
When the device is polled for status there is a lot of useful status information available that is ignored. This patch stores the device info array when the status is polled and adds sysfs files to the usb device to allow userspace to query it. Since the device updates its status internally once a second the poll time is changed to this, and round_jiffies_relative is used to avoid waking the cpu unnecessarily. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-17cxacru: add the ZTE ZXDSL 852Duncan Sands
From http://doc.ubuntu-fr.org/materiel/zxdsl852. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-01-31[PATCH] USBATM: semaphore to mutex conversionArjan van de Ven
This is the usbatm part of the Arjan, Jes and Ingo mass semaphore to mutex conversion, reworked to apply on top of the patches I just sent to you. This time, with correct attribution and signed-off lines. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: allow isochronous transferDuncan Sands
While the usbatm core has had some support for using isoc urbs for some time, there was no way for users to turn it on. While use of isoc transfer should still be considered experimental, it now works well enough to let users turn it on. Minidrivers signal to the core that they want to use isoc transfer by setting the new UDSL_USE_ISOC flag. The speedtch minidriver gets a new module parameter enable_isoc (defaults to false), plus some logic that checks for the existence of an isoc receive endpoint (not all speedtouch modems have one). Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: kzalloc conversionDuncan Sands
Convert kmalloc + memset to kzalloc. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: remove .ownerDuncan Sands
Remove the unused .owner field in struct usbatm_driver. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: add flags fieldDuncan Sands
Have minidrivers and the core signal special requirements using a flags field in struct usbatm_data. For the moment this is only used to replace the need_heavy_init bind parameter, but there'll be new flags in later patches. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: trivial modificationsDuncan Sands
Formatting, changes to variable names, comments, log level changes, printk rate limiting. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: remove .owner field from struct usb_driverGreg Kroah-Hartman
It is no longer needed, so let's remove it, saving a bit of memory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-29[PATCH] Additional device ID for Conexant AccessRunner USB driverDave Jones
Reported as working in Fedora bugzilla by Petr. From: Petr Tuma <petr.tuma@mff.cuni.cz> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] USB: URB_ASYNC_UNLINK flag removed from the kernelAlan Stern
29 July 2005, Cambridge, MA: This afternoon Alan Stern submitted a patch to remove the URB_ASYNC_UNLINK flag from the Linux kernel. Mr. Stern explained, "This flag is a relic from an earlier, less-well-designed system. For over a year it hasn't been used for anything other than printing warning messages." An anonymous spokesman for the Linux kernel development community commented, "This is exactly the sort of thing we see happening all the time. As the kernel evolves, support for old techniques and old code can be jettisoned and replaced by newer, better approaches. Proprietary operating systems do not have the freedom or flexibility to change so quickly." Mr. Stern, a staff member at Harvard University's Rowland Institute who works on Linux only as a hobby, noted that the patch (labelled as548) did not update two files, keyspan.c and option.c, in the USB drivers' "serial" subdirectory. "Those files need more extensive changes," he remarked. "They examine the status field of several URBs at times when they're not supposed to. That will need to be fixed before the URB_ASYNC_UNLINK flag is removed." Greg Kroah-Hartman, the kernel maintainer responsible for overseeing all of Linux's USB drivers, did not respond to our inquiries or return our calls. His only comment was "Applied, thanks." Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-12[PATCH] USB ATM: line speed measured in Kb not KibDuncan Sands
Spotted by David Woodhouse. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] USB ATM: driver for the Conexant AccessRunner chipset cxacruDuncan Sands
Driver for modems based on the Conexant AccessRunner chipset. Original patch by Josep Comas, much reworked by Roman Kagan. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>