aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/atm
AgeCommit message (Collapse)Author
2007-07-12USB: cxacru: Cleanup sysfs attribute codeSimon Arlott
This changes the format of unknown status values to be less verbose and uses an array instead of several different snprintf calls. Since only enum values are assigned to it, poll_state is changed from int to enum. Use abs() for dB values instead of two almost identical return lines. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: cxacru: ignore error trying to start ADSL in atm_startSimon Arlott
The sysfs adsl_status attribute ignores (aside from returning -EIO to the user) any error sending a START/STOP command to the device and there is at least one firmware which never sends a response but appears to work regardless. Therefore atm_start should also continue if an error is received so that such firmware is usable. The official Conexant driver doesn't expect a reply either but this is for another device (E2 router) and a commonly used firmware does respond. Also, there is no point in changing -ECONNRESET to -ETIMEDOUT since nothing ever checks for either of these values. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: cxacru: create sysfs attributes in atm_start instead of bindSimon Arlott
Since usbatm doesn't set the usb_interface driver data until after calling bind and heavy_init, it would be NULL when the sysfs attributes are read. Reading the MAC address from atm_dev before atm_dev exists would have been be possible too. Calling create_device_file in atm_start will avoid this problem, and the data is useless until the first status poll runs. However, it must be ready before a status poll does a printk on line status change otherwise userspace could react before the files exist. For completeness I've moved remove_device_file to atm_stop so it's not called in unbind when it's not needed. There's no point starting ADSL if atm_start could still fail either. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-09usbatm_heavy_init: don't use CLONE_SIGHANDOleg Nesterov
usbatm_do_heavy_init() calls allow_signal() which plays with parent process's ->sighand. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Duncan Sands <duncan.sands@free.fr> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-27USB: cxacru: ADSL state managementSimon Arlott
The device has commands to start/stop the ADSL function, so this adds a sysfs attribute to allow it to be started/stopped/restarted. It also stops polling the device for status when the ADSL function is disabled. There are no problems with sending multiple start or stop commands, even with a fast loop of them the device still works. There is no need to protect the restart process from further user actions while it's waiting for 1.5s. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbatm: Detect usb device shutdown and ignore failed urbsSimon Arlott
Detect usb device shutdown and ignore failed urbs. This happens when the driver is unloaded or the device is unplugged. I'm not sure what other urb statuses should be ignored, and the warning message doesn't need to be shown when the module is unloaded or the device is removed. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cxacru: export detailed device info through sysfsSimon Arlott
When the device is polled for status there is a lot of useful status information available that is ignored. This patch stores the device info array when the status is polled and adds sysfs files to the usb device to allow userspace to query it. Since the device updates its status internally once a second the poll time is changed to this, and round_jiffies_relative is used to avoid waking the cpu unnecessarily. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbatm: create sysfs link "device" from atm class device to usb interfaceSimon Arlott
There is currently no path from the ATM device in /sys to the USB device's interface that the driver is using; this patch creates a "device" symlink. It is then possible to get to the cxacru ADSL statistics (http://lkml.org/lkml/2007/2/23/328): /sys/class/atm/cxacru0/device $ ls *_rate *_margin *_attenuation downstream_attenuation downstream_snr_margin upstream_rate downstream_rate upstream_attenuation upstream_snr_margin If this link is not appropriate I'd have to create device files in /sys/class/atm/cxacru0 instead - which seems less appropriate since the ADSL statistics are for the USB device not ATM (which is running over the ADSL). [akpm@linux-foundation.org: cleanups] Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-25[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[SK_BUFF]: Convert skb->end to sk_buff_data_tArnaldo Carvalho de Melo
Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-16USB: ueagle-atm.c needs sched.hRandy Dunlap
Driver needs sched.h for try_to_freeze(). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: <linux/usb_ch9.h> becomes <linux/usb/ch9.h>David Brownell
This moves <linux/usb_ch9.h> to <linux/usb/ch9.h> to reduce some of the clutter of usb header files. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-07[PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-01USB: speedtch: Use usb_endpoint_* functionsLuiz Fernando N. Capitulino
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: kmemdup() cleanup in drivers/usb/Eric Sesterhenn
replace open coded kmemdup() to save some screen space, and allow inlining/not inlining to be triggered by gcc. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-17UEAGLE: fix ueagle-atm Oopsmatthieu castet
The array of attribute passed to sysfs_create_group() must be NULL-terminated. The sysfs entries are created before the start of the modem state machine to avoid to stop it in case of errors in sysfs creation. Also {destroy,create}_fs_entries are removed as they do nothing. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17USB: fix usbatm tiny raceAndrew Morton
ia64: drivers/usb/atm/usbatm.c: In function `usbatm_do_heavy_init': drivers/usb/atm/usbatm.c:1004: warning: implicit declaration of function `get_current' drivers/usb/atm/usbatm.c:1004: error: invalid type argument of `->' Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17cxacru: add the ZTE ZXDSL 852Duncan Sands
From http://doc.ubuntu-fr.org/materiel/zxdsl852. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17speedtch: "extended reach"Duncan Sands
The speedtouch modem setup code was reverse engineered many years ago from a prehistoric windows driver. Less ancient windows drivers, even those from a few years ago, perform extra initialization steps which this patch adds to the linux driver. David Woodhouse observed that this initialization along with the firmware bin/sachu3/zzzlp2.eni from the driver at http://www.speedtouch.co.uk/downloads/330/301/UK3012%20Extended.zip improves line sync speeds by about 20%. He provided the original patch, which I've modified to use symbolic names (BMaxDSL, ModemMode, ModemOption) rather than magic numbers. These names may not seem like much of an improvement (after all, what is "ModemOption" exactly?), but they do have one big advantage: they are the names used in the windows registry. I've made them available as module parameters. Thanks are due to Aurelio Arroyo, who noticed the relationship between these magic numbers and the entries in Phonebook.ini. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17usbatm: fix tiny raceDuncan Sands
If usbatm_do_heavy_init finishes before usbatm_heavy_init writes the pid, the disconnect method could shoot down the wrong process if the pid has been recycled. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17UEAGLE : comestic changesmatthieu castet
Hi, this patch does some cosmetic changes : - dump firwmare version as soon as possible and export it on sysfs - hint about wrong cmv/dsp - Display a message to warn user when the modem is ready : it can help people to detect problems on the line without debug trace - Fix wrong indent - display modem type (pots/isdn) - increase version number Signed-off-by: Matthieu Castet <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17UEAGLE : use interruptible sleepmatthieu castet
this patch use wait_event_interruptible_timeout and msleep_interruptible beacause uninterruptible sleep (task state 'D') is counted as 1 towards load average, like running processes. Signed-off-by: Matthieu Castet <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-17UEAGLE : be suspend friendlymatthieu castet
this patch avoid that the kernel thread block the suspend process. Some work is still need to recover after a resume. Signed-off-by: Matthieu Castet <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-03Still more typo fixesMatt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-27USB: fix __must_check warnings in drivers/usb/atm/Greg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USBATM: remove no-longer needed #includeDuncan Sands
We #include <linux/netdevice.h> only because <linux/etherdevice.h> needed it, but didn't #include it itself. But that's been fixed now. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USBATM: remove pointless inlineDuncan Sands
Remove pointless inline. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USBATM: fix modinfo outputDuncan Sands
Because of the way stringify works, using an expression like 64 * 1024 for UDSL_MAX_BUF_SIZE results in 64 * 1024 turning up in the modinfo output instead of 65536. So use 65536 directly (this was the only way I found of fixing this). Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USBATM: change the default speedtouch iso altsettingDuncan Sands
The maximum possible bandwidth for a speedtouch modem is about 7Mbaud. You can only get this by using isochronous urbs (enable_isoc=1) and altsetting 3. With the current default altsetting of 2, the modem maxes out at about 4Mbaud. So change the default altsetting to 3 when using isochronous urbs. It would be nice to base the altsetting on the detected line speed, but that's hard given the current design. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UEAGLE : memory leack fixmatthieu castet
this patch fix leak of memory allocated to intr if allocation of sc->urb_int fails. Found by the Coverity checker. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UEAGLE : null pointer dereference fixmatthieu castet
this patch fix potential null pointer dereference. Found by the Coverity checker. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UEAGLE : support geodematthieu castet
- increase ack timeout for slow system (geode 233MHz where HZ=100) - reset the cmv ack flag when rebooting Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UEAGLE : cosmeticmatthieu castet
- improve debug trace in order to make easy to solve user problems. - indent some code - increase version number Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] UEAGLE : cmv name bug (was cosmetic)matthieu castet
this patch correct a possible bug with cmv_name being static. If there is 2 modems and the driver is scheduled when filling cmv_name this could result with garbage in cmv_name. We allocate cmv_name on the stack but with a small size in order to avoid that. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] UEAGLE : cosmeticmatthieu castet
this patch is purely cosmetic. There is : - indentation cleaning - unneeded cast removing - comments cleaning Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] UEAGLE : add iso supportmatthieu castet
This patch adds the support for isochronous pipe. A new module parameter is added to select iso mode. It is set to iso by default because bulk mode doesn't work well at high speed rate (>3 Mbps for upload). We use UDSL_IGNORE_EILSEQ flags because ADI firmware doesn't reply to ISO IN when it has nothing to send [1]. [1] from cypress datasheet : The ISOSEND0 Bit (bit 7 in the USBPAIR Register) is used when the EZ-USB FX chip receives an isochronous IN token while the IN FIFO is empty. If ISOSEND0=0 (the default value), the USB core does not respond to the IN token. If ISOSEND0=1, the USB core sends a zero-length data packet in response to the IN token. The action to take depends on the overall system design. The ISOSEND0 Bit applies to all of the isochronous IN endpoints, IN-8 through IN-15. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: semaphore to mutex conversionArjan van de Ven
This is the usbatm part of the Arjan, Jes and Ingo mass semaphore to mutex conversion, reworked to apply on top of the patches I just sent to you. This time, with correct attribution and signed-off lines. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: -EILSEQ workaroundDuncan Sands
Don't throttle on -EILSEQ urb status if requested by a minidriver. It seems the ueagle modems are buggy, giving -EILSEQ when they have no data to send. The ueagle change will be sent separately by the ueagle guys. Patch by Matthieu Castet. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: bump version numbersDuncan Sands
Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: handle urbs containing partial cellsDuncan Sands
The receive logic has always assumed that urbs contain an integral number of ATM cells, which is a bit naughty, though it never caused any problems with bulk transfers. Isochronous urbs spank us soundly for this. Fixed thanks to this patch, mostly by Stanislaw Gruszka. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: allow isochronous transferDuncan Sands
While the usbatm core has had some support for using isoc urbs for some time, there was no way for users to turn it on. While use of isoc transfer should still be considered experimental, it now works well enough to let users turn it on. Minidrivers signal to the core that they want to use isoc transfer by setting the new UDSL_USE_ISOC flag. The speedtch minidriver gets a new module parameter enable_isoc (defaults to false), plus some logic that checks for the existence of an isoc receive endpoint (not all speedtouch modems have one). Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: measure buffer size in bytes; force valid sizesDuncan Sands
Change the module parameters rcv_buf_size and snd_buf_size to specify buffer sizes in bytes rather than ATM cells. Since there is some danger that users may not notice this change, the parameters are renamed to rcv_buf_bytes etc. The transmit buffer needs to be a multiple of the ATM cell size in length, while the receive buffer should be a multiple of the endpoint maxpacket size (this wasn't enforced before, which causes trouble with isochronous transfers), so enforce these restrictions. Now that the usbatm probe method inspects the endpoint maxpacket size, minidriver bind routines need to set the correct alternate setting for the interface in their bind routine. This is the reason for the speedtch changes. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: use dev_kfree_skb_any rather than dev_kfree_skbDuncan Sands
In one spot (usbatm_cancel_send) we were calling dev_kfree_skb with irqs disabled. This mistake is just too easy to make, so systematically use dev_kfree_skb_any rather than dev_kfree_skb. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USBATM: return correct error code when out of memoryDuncan Sands
We weren't always returning -ENOMEM. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>