aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/core/driver.c
AgeCommit message (Collapse)Author
2008-04-24USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: HCDs use the do_remote_wakeup flagAlan Stern
When a USB device is suspended, whether or not it is enabled for remote wakeup depends on the device_may_wakeup() setting. The setting is then saved in the do_remote_wakeup flag. Later on, however, the device_may_wakeup() value can change because of user activity. So when testing whether a suspended device is or should be enabled for remote wakeup, we should always test do_remote_wakeup instead of device_may_wakeup(). This patch (as1076) makes that change for root hubs in several places. The patch also adjusts uhci-hcd so that when an autostopped controller is suspended, the remote wakeup setting agrees with the value recorded in the root hub's do_remote_wakeup flag. And the patch adjusts ehci-hcd so that wakeup events on selectively suspended ports (i.e., the bus itself isn't suspended) don't turn on the PME# wakeup signal. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: remove dev->power.power_stateAlan Stern
power.power_state is scheduled for removal. This patch (as1053) removes all uses of that field from drivers/usb. Almost all of them were write-only, the most significant exceptions being sl811-hcd.c and u132-hcd.c. Part of this patch was written by Pavel Machek. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: EHCI: carry out port handover during each root-hub resumeAlan Stern
This patch (as1044) causes EHCI port handover for non-high-speed devices to occur during every root-hub resume, not just in cases where the controller lost power or was reset. This is necessary because: When some machines go into suspend, they remove power from on-board USB devices while retaining suspend current for USB controllers. The user might well unplug a USB device while the system is suspended and then plug it back in before resuming. A corresponding change is made to the core resume routine; now high-speed root hubs will always be resumed when the system wakes up, even if they were suspended before the system went to sleep. If this weren't done then EHCI port handover wouldn't work, since it is called when the EHCI root hub is resumed. Finally, a comment is added to the hub driver explaining the khubd has to be freezable; if it weren't frozen then it could interfere with port handover. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: fix codingstyle issues in drivers/usb/core/*.cGreg Kroah-Hartman
Fixes a number of coding style issues in the remaining .c files in drivers/usb/core/ Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: mark USB drivers as being GPL onlyGreg Kroah-Hartman
Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: handle idVendor of 0x0000Greg Kroah-Hartman
Some crazy devices in the wild have a vendor id of 0x0000. If we try to add a module alias with this id, we just can't do it due to a check in the file2alias.c file. Change the test to verify that both the vendor and product ids are 0x0000 to show a real "blank" module alias. Note, the module-init-tools package also needs to be changed to properly generate the depmod tables. Cc: Janusz <janumix@poczta.fm> Cc: stable <stable@kernel.org> Cc: Jon Masters <jcm@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24USB: use proper call to driver_create_fileGreg Kroah-Hartman
Don't try to call the "raw" sysfs_create_file when we already have a helper function to do this kind of work for us. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: uevent environment key fixAlan Stern
This patch (as1010) was written by both Kay Sievers and me. It solves the problem of duplicated keys in USB uevent structures by refactoring the uevent subroutines, taking advantage of the way the hotplug core calls uevent handlers for the device's bus and for the device's type. Keys needed for both USB-device and USB-interface events are added in usb_uevent(), which is the bus handler. Keys appropriate only for USB-device or USB-interface events are added in usb_dev_uevent() or usb_if_uevent() respectively, the type handlers. In addition, unnecessary tests for NULL pointers are removed as are duplicated debugging log statements. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
2007-10-12USB: fix race in autosuspend rescheduleAlan Stern
This patch (as1002) fixes a small race which can occur when a driver expects usbcore to reschedule an autosuspend request. If the request arrives too late, it won't be rescheduled. The patch adds an extra argument to autosuspend_check(), indicating that a reschedule is needed no matter how much time has elapsed. It also tries to avoid letting asynchronous changes to the value of jiffies cause a delay to become negative, by caching a local copy of the current time. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: skip autosuspended devices during system resumeAlan Stern
System suspends and hibernation are supposed to be as transparent as possible. By this reasoning, if a USB device is already autosuspended before the system sleep begins then it should remain autosuspended after the system wakes up. This patch (as1001) adds a skip_sys_resume flag to the usb_device structure and uses it to avoid waking up devices which were suspended when a system sleep began. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: don't propagate FREEZE or PRETHAW suspendsAlan Stern
This patch (as992) fixes a recently-added bug. During a FREEZE or PRETHAW suspend notification, non-root devices don't actually get suspended. So we shouldn't tell their parent hubs that they did. (This code path used to be skipped over, until the FREEZE/PRETHAW test got moved out of usb_suspend_both() into generic_suspend().) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: flush outstanding URBs when suspendingAlan Stern
This patch (as989) makes usbcore flush all outstanding URBs for each device as the device is suspended. This will be true even when CONFIG_USB_SUSPEND is not enabled. In addition, an extra can_submit flag is added to the usb_device structure. That flag will be turned off whenever a suspend request has been received for the device, even if the device isn't actually suspended because CONFIG_USB_SUSPEND isn't set. It's no longer necessary to check for the device state being equal to USB_STATE_SUSPENDED during URB submission; that check can be replaced by a check of the can_submit flag. This also permits us to remove some questionable references to the deprecated power.power_state field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: move decision to ignore FREEZE eventsAlan Stern
This patch (as987) changes the way FREEZE and PRETHAW suspend events are handled in usbcore. The decision about whether or not to ignore them for non-root devices is pushed down into the USB-device driver, instead of being made in the core code. This is appropriate, since devices exported to a virtualized guest or over a network may indeed need to handle these types of suspend, even though normal devices don't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12usb: usb_probe_interface() obeys authorizationInaky Perez-Gonzalez
If called and the device is not authorized to be used, it won't configure the interface and print a message saying so. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-11USB: fix linked list insertion bugfix for usb coreNathael Pajani
This patch fixes the order of list_add_tail() arguments in usb_store_new_id() so the list can have more than one single element. Signed-off-by: Nathael Pajani <nathael.pajani@cpe.fr> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: update last_busy field correctlyAlan Stern
This patch (as966) fixes a bug in the autosuspend code. The last_busy field should be updated whenever any event occurs, not just events that cause an autosuspend or an autoresume. This partially fixes Bugzilla #8892. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18dev_vdbg(), available with -DVERBOSE_DEBUGDavid Brownell
This defines a dev_vdbg() call, which is enabled with -DVERBOSE_DEBUG. When enabled, dev_vdbg() acts just like dev_dbg(). When disabled, it is a NOP ... just like dev_dbg() without -DDEBUG. The specific code was moved out of a USB patch, but lots of drivers have similar support. That is, code can now be written to use an additional level of debug output, selected at compile time. Many driver authors have found this idiom to be very useful. A typical usage model is for "normal" debug messages to focus on fault paths and not be very "chatty", so that those messages can be left on during normal operation without much of a performance or syslog load. On the other hand "verbose" messages would be noisy enough that they wouldn't normally be enabled; they might even affect timings enough to change system or driver behavior. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: Make usb-autosuspend timer 1 sec jiffy alignedVenki Pallipadi
Make usb autosuspend timers 1sec jiffy aligned. This helps to reduce the frequency at which the CPU must be taken out of a lower-power state. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: Remove usages of dev->power.power_stateAlan Stern
This patch (as922) removes all but one of the remaining vestiges of dev->power.power_state from usbcore. The only usage left must remain until the deprecated "power/state" sysfs attribute is gone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: add reset_resume methodAlan Stern
This patch (as918) introduces a new USB driver method: reset_resume. It is called when a device needs to be reset as part of a resume procedure (whether because of a device quirk or because of the USB-Persist facility), thereby taking over a role formerly assigned to the post_reset method. As a consequence, post_reset no longer needs an argument indicating whether it is being called as part of a reset-resume. This separation of functions makes the code clearer. In addition, the pre_reset and post_reset method return types are changed; they now must return an error code. The return value is unused at present, but at some later time we may unbind drivers and re-probe if they encounter an error during reset handling. The existing pre_reset and post_reset methods in the usbhid, usb-storage, and hub drivers are updated to match the new requirements. For usbhid the post_reset routine is also used for reset_resume (duplicate method pointers); for the other drivers a new reset_resume routine is added. The change to hub.c looks bigger than it really is, because mark_children_for_reset_resume() gets moved down next to the new hub_reset_resume() routine. A minor change to usb-storage makes the usb_stor_report_bus_reset() routine acquire the host lock instead of requiring the caller to hold it already. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: rework C++-style commentsAlan Stern
This patch (as911) replaces some C++-style commented-out debugging lines in driver.c with a new "verbose debugging" macro. It makes the code look cleaner, and it's easier to turn the debugging on or off. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: add RESET_RESUME device quirkAlan Stern
This patch (as888) adds a new USB device quirk for devices which are unable to resume correctly. By using the new code added for the USB-persist facility, it is a simple matter to reset these devices instead of resuming them. To get things kicked off, a quirk entry is added for the Philips PSC805. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: add USB-Persist facilityAlan Stern
This patch (as886) adds the controversial USB-persist facility, allowing USB devices to persist across a power loss during system suspend. The facility is controlled by a new Kconfig option (with appropriate warnings about the potential dangers); when the option is off the behavior will remain the same as it is now. But when the option is on, people will be able to use suspend-to-disk and keep their USB filesystems intact -- something particularly valuable for small machines where the root filesystem is on a USB device! Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: move bus_suspend and bus_resume method callsAlan Stern
This patch (as885) moves the root-hub bus_suspend() and bus_resume() method calls from the hub driver's suspend and resume methods into the usb_generic driver methods, where they make just as much sense. Their old locations were not fully correct. For example, in a kernel compiled without CONFIG_USB_SUSPEND, if one were to do: echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind to unbind the hub driver from a root hub, there would then be no way to suspend that root hub. Attempts to put the system to sleep would fail; the USB controller driver would refuse to suspend because the root hub was still active. The patch also makes a very slight change in the way devices with no driver are handled during suspend. Rather than doing a standard USB port-suspend directly, now the suspend routine in usb_generic is called. In practice this should never affect anyone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: Implement PM FREEZE and PRETHAWAlan Stern
This patch (as884) finally implements the time-saving semantics possible with the Power Management FREEZE and PRETHAW events. Their proper handling requires only that devices be quiesced, with interrupts and DMA turned off; non-root USB devices don't actually need to be put in a suspended state. The patch checks and avoids doing the suspend call when possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: interface PM stateAlan Stern
This patch (as880) strives to keep the PM core's idea of a USB interface's power state in synch with usbcore's own idea. In the end this doesn't really matter, but it's better to be consistent. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: more autosuspend timer stuffAlan Stern
This patch (as879) ties up some loose ends from an earlier patch. These are things I didn't think to include at the time but which clearly belonged there. If an autosuspend fails because driver activity races with the autosuspend call, restart the autosuspend timer. When a device is resumed by an external request, it counts as device activity and should update the last_busy time so that the next autoresume won't occur immediately. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix signed jiffies issue in autosuspend logicAlan Stern
This patch (as897) changes the autosuspend timer code to use the standard types and macros in dealing with jiffies values. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add "last_busy" field for use in autosuspendAlan Stern
This patch (as877) adds a "last_busy" field to struct usb_device, for use by the autosuspend framework. Now if an autosuspend call comes at a time when the device isn't busy but hasn't yet been idle for long enough, the timer can be set to exactly the desired value. And we will be ready to handle things like HID drivers, which can't maintain a useful usage count and must rely on the time-of-last-use to decide when to autosuspend. The patch also makes some related minor improvements: Move the calls to the autosuspend condition-checking routine into usb_suspend_both(), which is the only place where it really matters. If the autosuspend timer is already running, don't stop and restart it. Replace immediate returns with gotos so that the optional debugging ouput won't be bypassed. If autoresume is disabled but the device is already awake, don't return an error for an autoresume call. Don't try to autoresume a device if it isn't suspended. (Yes, this undercuts the previous change -- so sue me.) Don't duplicate existing code in the autosuspend work routine. Fix the kerneldoc in usb_autopm_put_interface(): If an autoresume call fails, the usage counter is left unchanged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: make usbdevices export their device nodes instead of using a separate classKay Sievers
o The "real" usb-devices export now a device node which can populate /dev/bus/usb. o The usb_device class is optional now and can be disabled in the kernel config. Major/minor of the "real" devices and class devices are the same. o The environment of the usb-device event contains DEVNUM and BUSNUM to help udev and get rid of the ugly udev rule we need for the class devices. o The usb-devices and usb-interfaces share the same bus, so I used the new "struct device_type" to let these devices identify themselves. This also removes the current logic of using a magic platform-pointer. The name of the device_type is also added to the environment which makes it easier to distinguish the different kinds of devices on the same subsystem. It looks like this: add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1 SUBSYSTEM=usb SEQNUM=1533 MAJOR=189 MINOR=131 DEVTYPE=usb_device PRODUCT=46d/c03e/2000 TYPE=0/0/0 BUSNUM=002 DEVNUM=004 This udev rule works as a replacement for usb_device class devices: SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" Updated patch, which needs the device_type patches in Greg's tree. I also got a bugzilla assigned for this. :) https://bugzilla.novell.com/show_bug.cgi?id=250659 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add power/level sysfs attributeAlan Stern
This patch (as874) adds another piece to the user-visible part of the USB autosuspend interface. The new power/level sysfs attribute allows users to force the device on (with autosuspend off), force the device to sleep (with autoresume off), or return to normal automatic operation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: Allow autosuspend delay to equal 0Alan Stern
This patch (as867) adds an entry for the new power/autosuspend attribute in Documentation/ABI/testing, and it changes the behavior of the delay value. Now a delay of 0 means to autosuspend as soon as possible, and negative values will prevent autosuspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: separate autosuspend from external suspendAlan Stern
This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbcore: move usb_autosuspend_workAlan Stern
This patch (as864) moves the work routine for USB autosuspend from one source file to another. This permits the removal of one whole global symbol (!) and should smooth the way for more changes in the future. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: remove use of the bus rwsem, as it doesn't really protect anything.Greg Kroah-Hartman
The driver core stopped using the rwsem a long time ago, yet the USB core still grabbed the lock, thinking it protected something. This patch removes that useless use. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.de> Cc: David Brownell <david-b@pacbell.net> Cc: linux-usb-devel <linux-usb-devel@lists.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: export autosuspend delay in sysfsAlan Stern
This patch (as861) adds sysfs attributes to expose the autosuspend delay value for each USB device. If the user changes the delay from 0 (no autosuspend) to a positive value, an autosuspend is attempted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: make autosuspend delay a module parameterAlan Stern
This patch (as859) makes the default USB autosuspend delay a module parameter of usbcore. By setting the delay value at boot time, users will be able to prevent the system from autosuspending devices which for some reason can't handle it. The patch also stores the autosuspend delay as a per-device value. A later patch will allow the user to change the value, tailoring the delay for each individual device. A delay value of 0 will prevent autosuspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: refactor usb device matching and create usb_device_matchGreg Kroah-Hartman
This is needed for the quirk match code. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: kernel-doc fixesRandy Dunlap
Fix kernel-doc warnings and in USB core. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (70 commits) USB: remove duplicate device id from zc0301 USB: remove duplicate device id from usb_storage USB: remove duplicate device id from keyspan USB: remove duplicate device id from ftdi_sio USB: remove duplicate device id from visor USB: a bit more coding style cleanup usbcore: trivial whitespace fixes usb-storage: use first bulk endpoints, not last EHCI: fix interrupt-driven remote wakeup USB: switch ehci-hcd to new polling scheme USB: autosuspend for usb printer driver USB Input: Added kernel module to support all GTCO CalComp USB InterWrite School products USB: Sierra Wireless auto set D0 USB: usb ethernet gadget recognizes HUSB2DEV USB: list atmel husb2_udc gadget controller USB: gadgetfs AIO tweaks USB: gadgetfs behaves better on userspace init bug USB: gadgetfs race fix USB: gadgetfs simplifications USB: gadgetfs cleanups ...
2007-02-07USB serial: add dynamic id support to usb-serial coreGreg Kroah-Hartman
Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few things and getting it all working properly. This adds support for dynamic usb ids to the usb serial core. The file "new_id" will show up under the usb serial driver, not the usb driver associated with the usb-serial driver (yeah, it can be a bit confusing at first glance...) This patch also modifies the USB core to allow the usb-serial core to reuse much of the dynamic id logic. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
2007-02-07USB: add the sysfs driver name to all modulesGreg Kroah-Hartman
This adds the module name to all USB drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ Cc: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01usbcore: remove unused argument in autosuspendAlan Stern
Thanks to several earlier patches, usb_autosuspend_device() and usb_autoresume_device() are never called with a second argument other than 1. This patch (as819) removes the now-redundant argument. It also consolidates some common code between those two routines, putting it into a new subroutine called usb_autopm_do_device(). And it includes a sizable kerneldoc update for the affected functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: keep count of unsuspended childrenAlan Stern
This patch (as818b) simplifies autosuspend processing by keeping track of the number of unsuspended children of each USB hub. This will permit us to avoid a good deal of unnecessary work all the time; we will no longer have to create a bunch of workqueue entries to carry out autosuspend requests, only to have them fail because one of the hub's children isn't suspended. The basic idea is simple. There already is a usage counter in the usb_device structure for preventing autosuspends. The patch just increments that counter for every unsuspended child. There's only one tricky part: When a device disconnects we need to remember whether it was suspended at the time (leave the counter alone) or not (decrement the counter). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: make drivers/usb/core/driver.c:usb_device_match() staticAdrian Bunk
usb_device_match() can now become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: resume_device symbol conflictStephen Hemminger
Several functions in USB core overlap with global functions. The linker appears to do the right thing, but it is bad practice and makes debugging harder. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01USB: expand autosuspend/autoresume APIAlan Stern
This patch (as814) adds usb_autopm_set_interface() to the autosuspend API. It also provides convenient wrapper routines, usb_autopm_enable() and usb_autopm_disable(), for drivers that want to specify directly whether autosuspend should be allowed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>