aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2010-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits) USB: backlight, appledisplay: fix incomplete registration failure handling USB: pl2303: remove unnecessary reset of usb_device in urbs USB: ftdi_sio: remove obsolete check in unthrottle USB: ftdi_sio: remove unused tx_bytes counter USB: qcaux: driver for auxiliary serial ports on Qualcomm devices USB: pl2303: initial TIOCGSERIAL support USB: option: add Longcheer/Longsung vendor ID USB: fix I2C API usage in ohci-pnx4008. USB: usbmon: mask seconds properly in text API USB: sisusbvga: no unnecessary GFP_ATOMIC USB: storage: onetouch: unnecessary GFP_ATOMIC USB: serial: ftdi: add CONTEC vendor and product id USB: remove references to port->port.count from the serial drivers USB: tty: Prune uses of tty_request_room in the USB layer USB: tty: Add a function to insert a string of characters with the same flag USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration() USB: tty: kill request_room for USB ACM class USB: tty: sort out the request_room handling for whiteheat USB: storage: fix misplaced parenthesis USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers ...
2010-03-02USB: fix I2C API usage in ohci-pnx4008.Luotao Fu
i2c_board_info doesn't contain a member called name. i2c_register_client call does not exist. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: OHCI: DA8xx/OMAP-L1x glue layerSergei Shtylyov
Texas Instruments DA8xx/OMAP-L1x OHCI glue layer. This OHCI implementation is not without quirks: there's only one physical port despite the root hub reporting two; the port's power control and over-current status bits are not connected to any pins, however, at least on the DA830 EVM board, those signals are connected via GPIO, thus the provision was made for overriding the OHCI port power and over-current bits at the board level... Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci: omap: Update TODO list in commentsAnand Gadiyar
DPLL5 programming was moved out of this file before submission. Update the TODO list in the comments to reflect this Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci: omap: use default interrupt thresholdAnand Gadiyar
The current driver reduces the interrupt threshold to 1 microframe. This was an accidental change and is not really required. The default of 8 microframes will do just fine. So change it back. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: omap: ehci: kill 2 compile warningsAnand Gadiyar
Kill these compile warnings: CC [M] drivers/usb/host/ehci-hcd.o drivers/usb/host/ehci-dbg.c:45: warning: 'dbg_hcs_params' defined but not used drivers/usb/host/ehci-dbg.c:89: warning: 'dbg_hcc_params' defined but not used Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Fix finding extended capabilities registersEdward Shao
According "5.3.6 Capability Parameters (HCCPARAMS)" of xHCI rev0.96 spec, value of xECP register indicates a relative offset, in 32-bit words, from Base to the beginning of the first extended capability. The wrong calculation will cause BIOS handoff fail (not handoff from BIOS) in some platform with BIOS USB legacy sup support. Signed-off-by: Edward Shao <laface.tw@gmail.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: Convert concatenated __FILE__ to %s, __FILE__Joe Perches
Reduces string space a bit Neaten a macro redefine of dbg Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: isp1760: Flush the D-cache for the pipe-in transfer buffersCatalin Marinas
When the HDC driver writes the data to the transfer buffers it pollutes the D-cache (unlike DMA drivers where the device writes the data). If the corresponding pages get mapped into user space, there are no additional cache flushing operations performed and this causes random user space faults on architectures with separate I and D caches (Harvard) or those with aliasing D-cache. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Matthew Dharm <mdharm-kernel@one-eyed-alien.net> Cc: Greg KH <greg@kroah.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: remove obsolete config in kernel source (USB_HCD_DMA)Christoph Egger
The configuration Option USB_HCD_DMA is not reachable in KConfig so this piece of Code is effectively dead and useless. Remove it to avoid confusion. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB host: make Open Firmware device id constantNémeth Márton
The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: fix crash in uhci_scan_schedulePete Zaitcev
When hardware is removed on a Stratus, the system may crash like this: ACPI: PCI interrupt for device 0000:7c:00.1 disabled Trying to free nonexistent resource <00000000a8000000-00000000afffffff> Trying to free nonexistent resource <00000000a4800000-00000000a480ffff> uhci_hcd 0000:7e:1d.0: remove, state 1 usb usb2: USB disconnect, address 1 usb 2-1: USB disconnect, address 2 Unable to handle kernel paging request at 0000000000100100 RIP: [<ffffffff88021950>] :uhci_hcd:uhci_scan_schedule+0xa2/0x89c #4 [ffff81011de17e50] uhci_scan_schedule at ffffffff88021918 #5 [ffff81011de17ed0] uhci_irq at ffffffff88023cb8 #6 [ffff81011de17f10] usb_hcd_irq at ffffffff801f1c1f #7 [ffff81011de17f20] handle_IRQ_event at ffffffff8001123b #8 [ffff81011de17f50] __do_IRQ at ffffffff800ba749 This occurs because an interrupt scans uhci->skelqh, which is being freed. We do the right thing: disable the interrupts in the device, and do not do any processing if the interrupt is shared with other source, but it's possible that another CPU gets delayed somewhere (e.g. loops) until we started freeing. The agreed-upon solution is to wait for interrupts to play out before proceeding. No other bareers are neceesary. A backport of this patch was tested on a 2.6.18 based kernel. Testing of 2.6.32-based kernels is under way, but it takes us forever (months) to turn this around. So I think it's a good patch and we should keep it. Tracked in RH bz#516851 Signed-Off-By: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Fix compile issues with xhci_get_slot_state()Sarah Sharp
Randy Dunlap reported this error when compiling the xHCI driver: linux-next-20100104/drivers/usb/host/xhci.h:1214: sorry, unimplemented: inlining failed in call to 'xhci_get_slot_state': function body not available The xhci_get_slot_state() function belongs in xhci-dbg.c, since it involves debugging internal xHCI structures. However, it is only used in xhci-hcd.c. Some toolchains may have issues since the inlined function body is not in the xhci.h header file. Remove the inline keyword to avoid this. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: FHCI: Correct the size argument to kzallocJulia Lawall
urb_priv->tds has type struct td **, not struct td *, so the elements of the array should have pointer type, not structure type. Convert kzalloc to kcalloc as well. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02usb: host: ehci: adding regulator framework in ehci-omap.c driver.Ajay Kumar Gupta
OMAP3 has three HS USB ports so it can have three different regulator for each PHY connected to each port. Currently these regulators are assumed to be optional and driver doesn't fail but continue with the initialization if it doesn't get any regulators. Regulator supply names has to be mapped in board files as 'hsusbN' where 'N' is port number and can be {0, 1 ,2}. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02usb: host: ehci: fix missing kfree in remove path alsoAjay Kumar Gupta
Added missing kfree() in ehci_hcd_omap_remove(). Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: rename USB_SPEED_VARIABLE to USB_SPEED_WIRELESSGreg Kroah-Hartman
It's really the wireless speed, so rename the thing to make more sense. Based on a recommendation from David Vrabel Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: host: SL811: fix unaligned accessesMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: isp1362: Use kzalloc for allocating only one thingJulia Lawall
Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: No GFP_KERNEL in block error handlingOliver Neukum
xhci_add_endpoint() is used in the reset path. It must use GFP_NOIO to avoid a possible deadlock. Signed-off-by: Oliver Neukum <oliver@neukum.org> Acked-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci-au1xxx.c: use platform_get_resource() and resource_size()H Hartley Sweeten
Use platform_get_resource() to fetch the memory resource and resource_size() for calculate the length. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci-atmel.c: use resource_size()H Hartley Sweeten
Use resource_size(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci-orion.c: use resource_size()H Hartley Sweeten
Use resource_size(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci-fsl: Add power management supportAnton Vorontsov
EHCI FSL controller preserve its state during sleep mode, so nothing fancy needs to be done. Though, during 'deep sleep' mode (as found in MPC831x CPUs) the controller turns off and needs to be reinitialized upon resume. This patch adds support for hibernation and resuming after deep sleep. Based on Dave Liu and Jerry Huang's work[1]. [1] http://www.bitshrine.org/gpp/linux-fsl-2.6.24.3-MPC8315ERDB-usb-power-mangement.patch Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci-fsl: Fix sparse warningsAnton Vorontsov
This patch fixes following warnings: ehci-fsl.c:43:5: warning: symbol 'usb_hcd_fsl_probe' was not declared. Should it be static? ehci-fsl.c:150:6: warning: symbol 'usb_hcd_fsl_remove' was not declared. Should it be static? Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci: fix audio record functionality for some Full speed sound blaster ↵Dmitri Epshtein
devices This patch fix audio record functionality for some Full speed sound blaster devices. Issue: Sometimes transaction complete indication is coming from HW one frame later. Solution: If scan_periodic process now frame or previous frame now-1 and sitd transaction is not finished yet, exit scan_periodic function and check the same transaction in the next frame. Signed-off-by: Dimitry Epshtein <dima@marvell.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ehci: add call of free_cached_itd_list() function in disable_periodic()Dmitri Epshtein
Sometimes disable_periodic() stop scan_periodic before than free_cached_itd_list() was called. In such case USB Host stacked during disconnect operation Solution: add call of free_cached_itd_list() function in disable_periodic() Signed-off-by: Dimitry Epshtein <dima@marvell.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: Add call to notify xHC of a device reset.Sarah Sharp
Add a new host controller driver method, reset_device(), that the USB core will use to notify the host of a successful device reset. The call may fail due to out-of-memory errors; attempt the port reset sequence again if that happens. Update hub_port_init() to allow resetting a configured device. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Notify the xHC when a device is reset.Sarah Sharp
When a USB device is reset, the xHCI hardware must know, in order to match the device state and disable all endpoints except control endpoint 0. Issue a Reset Device command after a USB device is successfully reset. Wait on the command to finish, and then cache or free the disabled endpoint rings. There are four different USB device states that the xHCI hardware tracks: - disabled/enabled - device connection has just been detected, - default - the device has been reset and has an address of 0, - addressed - the device has a non-zero address but no configuration has been set, - configured - a set configuration succeeded. The USB core may issue a port reset when a device is in any state, but the Reset Device command will fail for a 0.96 xHC if the device is not in the addressed or configured state. Don't consider this failure as an error, but don't free any endpoint rings if this command fails. A storage driver may request that the USB device be reset during error handling, so use GPF_NOIO instead of GPF_KERNEL while allocating memory for the Reset Device command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Allow roothub ports to be disabled.Sarah Sharp
Add the hub emulation code to allow ports on an xHCI root hub to be disabled. Add the code to clear the port enabled/disabled bit, and clear the port enabled/disabled change bit. Like EHCI, the port cannot be enabled by setting the port enabled/disabled bit. Instead, a port is enabled by the host controller after a reset. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Refactor code to clear port change bits.Sarah Sharp
Refactor the code to clear the port change bits in the port status register. All port status change bits are write one to clear. Remove a redundant port status read that was supposed to unblock any posted writes. We read the port after the write to get the updated status for debugging, so the port read after that is unnecessary. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Refactor test for vendor-specific completion codes.Sarah Sharp
All commands that can be issued to the xHCI hardware can come back with vendor-specific "informational" completion codes. These are to be treated like a successful completion code. Refactor out the code to test for the range of these codes and print debugging messages. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Allow allocation of commands without input contexts.Sarah Sharp
The xhci_command structure is the basic structure for issuing commands to the xHCI hardware. It contains a struct completion (so that the issuing function can wait on the command), command status, and a input context that is used to pass information to the hardware. Not all commands need the input context, so make it optional to allocate. Allow xhci_free_container_ctx() to be passed a NULL input context, to make freeing the xhci_command structure simple. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Refactor code to free or cache endpoint rings.Sarah Sharp
Refactor out the code to cache or free endpoint rings from recently dropped or disabled endpoints. This code will be used by a new function to reset a device and disable all endpoints except control endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: xhci: Fix error path when configuring endpoints.Sarah Sharp
If we fail to queue an evaluate context command or a configure endpoint command to the command ring in xhci_configure_endpoint(), we need to remove the xhci_command structure from the device's command list before returning. If the command is left on the command list, it will sit there indefinitely, blocking commands submitted after this fails. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: fix occasional ULPI timeouts with ehci-mxcValentin Longchamp
On various mxc boards, the intial ULPI reads resulted in a timeout which prevented the transceiver to be identified and thus the ehci device to be probed. Initializing the hardware lines connected to the transceiver (through pdata->init call) before actually enabling clocks and configuring registers in the devices fixes this problem. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: MXC: Add i.MX21 specific USB host controller driver.Martin Fuzzey
This driver is a Full / Low speed only USB host for the i.MX21. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-01Merge with mainline to remove plat-omap/Kconfig conflictTony Lindgren
Conflicts: arch/arm/plat-omap/Kconfig
2010-02-17Merge branch 'omap-fixes-for-linus' into omap-for-linusTony Lindgren
2010-02-16USB: FHCI: Fix build after kfifo reworkAnton Vorontsov
After kfifo rework FHCI fails to build: CC drivers/usb/host/fhci-tds.o drivers/usb/host/fhci-tds.c: In function 'fhci_ep0_free': drivers/usb/host/fhci-tds.c:108: error: used struct type value where scalar is required drivers/usb/host/fhci-tds.c:118: error: used struct type value where scalar is required drivers/usb/host/fhci-tds.c:128: error: used struct type value where scalar is required This is because kfifos are no longer pointers in the ep struct. So, instead of checking the pointers, we should now check if kfifo is initialized. Reported-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: ehci: phy low power mode bug fixingAlek Du
1. There are two msleep calls inside two spin lock sections, need to unlock and lock again after msleep. 2. Save a extra status reg setting. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-15omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3Tony Lindgren
Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-05usb: r8a66597-hcd: Fix up spinlock recursion in root hub polling.Paul Mundt
The current root hub polling code exhibits a spinlock recursion on the private controller lock. r8a66597_root_hub_control() is called from r8a66597_timer() which grabs the lock and disables IRQs. The following chain emerges: r8a66597_timer() <-- lock taken r8a66597_root_hub_control() r8a66597_check_syssts() usb_hcd_poll_rh_status() <-- acquires the same lock /* insert death here */ The entire chain requires IRQs to be disabled, so we just unlock and relock around the call to usb_hcd_poll_rh_status() while leaving the IRQ state unchanged. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2010-02-05usb: r8a66597-hcd: Flush the D-cache for the pipe-in transfer buffers.Paul Mundt
This implements the same D-cache flushing logic for r8a66597-hcd as Catalin's isp1760 (http://patchwork.kernel.org/patch/76391/) change, with the same note applying here as well: When the HDC driver writes the data to the transfer buffers it pollutes the D-cache (unlike DMA drivers where the device writes the data). If the corresponding pages get mapped into user space, there are no additional cache flushing operations performed and this causes random user space faults on architectures with separate I and D caches (Harvard) or those with aliasing D-cache. This fixes up crashes during USB boot on SH7724 and others: http://marc.info/?l=linux-sh&m=126439837308912&w=2 Reported-by: Goda Yusuke <goda.yusuke@renesas.com> Tested-by: Goda Yusuke <goda.yusuke@renesas.com> Cc: stable@kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2010-02-02usb: r8a66597-hdc disable interrupts fixMagnus Damm
This patch improves disable_controller() in the r8a66597-hdc driver to disable all interrupts and clear status flags. It also makes sure that disable_controller() is called during probe(). This fixes the relatively rare case of unexpected pending interrupts after kexec reboot. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20USB: isp1362: fix build failure on ARM systems via irq_flags cleanupLothar Wassmann
There was some left over #ifdef ARM logic that is outdated but no one really noticed. So instead of relying on this tricky logic, properly load and utilize the platform irq_flags resources. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: isp1362: better 64bit printf warning fixesLothar Wassmann
Some hosts that treat the return value of sizeof differently from unsigned long might still hit warnings. So use %zu for sizeof() values. This is a better version of the previous commit b0a9cf297e58721933. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Fix level of isp1760 Reloading ptd error messageColin Tuckley
This error message is not actually an error, it's an information message. It is triggered when a transfer which ended in a NAQ is retried successfully by the hardware. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: FHCI: avoid NULL pointer dereferenceAlexander Beregalov
Assign fhci only if usb is not NULL. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: add missing delay during remote wakeupAlan Stern
This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 11:33:11 +0000