aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2006-04-14[PATCH] USB: S3C2410: use clk_enable() to ensure 48MHz to OHCI coreBen Dooks
Get the "usb-bus" clock and ensure it is enabled when the OHCI core is in use. It seems that a few bootloaders do not enable the UPLL at startup, which stops the OHCI core having a 48MHz bus clock. The improvements to the clock framework for the s3c24xx now allow the USB PLL to be started and stopped when being used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UHCI: don't track suspended portsAlan Stern
Someone recently posted a bug report where it turned out that uhci-hcd was disagreeing with the UHCI controller over whether or not a port was suspended: The driver thought it wasn't and the hardware thought it was. This patch (as665) fixes the problem and simplifies the driver by removing the internal state-tracking completely. Now the driver just asks the hardware whether a port is suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: at91 usb driver supend/resume fixesDavid Brownell
AT91: the two USB drivers (OHCI, UDC) got out of sync with various usbcore and driver model PM updates; fix. Also minor fixes to ohci: whitespace/style, MODULE_ALIAS so coldplug works using /sys/.../modalias, and turn off _both_ clocks during suspend. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: pci-quirks.c: proper prototypesAdrian Bunk
This patch adds a header file with proper prototypes for two functions in drivers/usb/host/pci-quirks.c. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: cleanups for ohci-s3c2410.cBen Dooks
Fix compile errors due to functions not being defined static Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-31[PATCH] pcmcia: use bitfield instead of p_state and stateDominik Brodowski
Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: add return value to _config() functionsDominik Brodowski
Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: remove dev_link_t and client_handle_t indirectionDominik Brodowski
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: embed dev_link_t into struct pcmcia_deviceDominik Brodowski
Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: remove unneeded Vcc pseudo settingDominik Brodowski
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and Vpp2 can only be set to the same value, a lot of code can be streamlined. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: default suspend and resume handlingDominik Brodowski
In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irqDominik Brodowski
Convert the remaining drivers which use pcmcia_release_io or pcmcia_release_irq, and remove the EXPORT of these symbols. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-28[PATCH] Typo fixesAlexey Dobriyan
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-21Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (81 commits) [PATCH] USB: omninet: fix up debugging comments [PATCH] USB serial: add navman driver [PATCH] USB: Fix irda-usb use after use [PATCH] USB: rtl8150 small fix [PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor ids [PATCH] USB: cp2101: add new device IDs [PATCH] USB: fix check_ctrlrecip to allow control transfers in state ADDRESS [PATCH] USB: vicam.c: fix a NULL pointer dereference [PATCH] USB: ZC0301 driver bugfix [PATCH] USB: add support for Creativelabs Silvercrest USB keyboard [PATCH] USB: storage: new unusual_devs.h entry: Mitsumi 7in1 Card Reader [PATCH] USB: storage: unusual_devs.h entry 0420:0001 [PATCH] USB: storage: another unusual_devs.h entry [PATCH] USB: storage: sandisk unusual_devices entry [PATCH] USB: fix initdata issue in isp116x-hcd [PATCH] USB: usbcore: usb_set_configuration oops (NULL ptr dereference) [PATCH] USB: usbcore: Don't assume a USB configuration includes any interfaces [PATCH] USB: ub 03 drop stall clearing [PATCH] USB: ub 02 remove diag [PATCH] USB: ub 01 remove first_open ...
2006-03-20[PATCH] USB: fix initdata issue in isp116x-hcdGreg Kroah-Hartman
As found by Sam's scripts. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: UHCI: Increase port-reset completion delay for HP controllersAlan Stern
This patch (as657) increases the port-reset completion delay in uhci-hcd for HP's embedded controllers. Unlike other UHCI controllers, the HP chips can take as long as 250 us to carry out the processing associated with finishing a port reset. This fixes Novell bug #148761. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: kzalloc() conversion for rest of drivers/usbEric Sesterhenn
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB core and HCDs: don't put_device while atomicAlan Stern
This patch (as640) removes several put_device and the corresponding get_device calls from the USB core and HCDs. Some of the puts were done in atomic contexts, and none of them are needed since the core now guarantees that every endpoint will be disabled and every URB completed before a USB device is released. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] uhci-hcd: fix mistaken usage of list_prepare_entryAlan Stern
A recent update to the uhci-hcd driver invoked the list_prepare_entry macro incorrectly. This patch (as646) corrects it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: Don't log short transfersAlan Stern
Even when the URB_SHORT_NOT_OK flag is set, a short transfer shouldn't generate a debugging log message. Especially not one with the confusing claim that the transfer "failed with status 0". This patch (as627) fixes that behavior in uhci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: improve debugging codeAlan Stern
This patch (as626) makes some improvements to the debugging code in uhci-hcd. The main change is that now the code won't get compiled if CONFIG_USB_DEBUG isn't set. But there are other changes too, like adding a missing .owner field and printing a debugging dump if the controller dies. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: remove main list of URBsAlan Stern
As part of reorienting uhci-hcd away from URBs and toward endpoint queues, this patch (as625) eliminates the driver's main list of URBs. The list wsa used mainly in checking for URB completions; now the driver goes through the list of active endpoints and checks the members of the queues. As a side effect, I had to remove the code that looks for FSBR timeouts. For now, FSBR will remain on so long as any URBs on a full-speed control or bulk queue request it, even if the queue isn't advancing. A later patch can add more intelligent handling. This isn't a huge drawback; it's pretty rare for an URB to get stuck for more than a fraction of a second. (And it will help the people trying to use those insane HP USB devices.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: use dummy TDsAlan Stern
This patch (as624) fixes a hardware race in uhci-hcd by adding a dummy TD to the end of each endpoint's queue. Without the dummy the host controller will effectively turn off the queue when it reaches the end, which happens asynchronously. This leads to a potential problem when new transfer descriptors are added to the end of the queue; they may never get used. With a dummy TD present the controller never turns off the queue; instead it just stops at the dummy and leaves the queue on but inactive. When new TDs are added to the end of the queue, the first new one gets written over the dummy. Thus there's never any question about whether the queue is running or needs to be restarted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] UHCI: use one QH per endpoint, not per URBAlan Stern
This patch (as623) changes the uhci-hcd driver to make it use one QH per device endpoint, instead of a QH per URB as it does now. Numerous areas of the code are affected by this. For example, the distinction between "queued" URBs and non-"queued" URBs no longer exists; all URBs belong to a queue and some just happen to be at the queue's head. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: Fix masking bug initialization of Freescale EHCI controllerKumar Gala
In setting up the of PHY we masked off too many bits, instead just initialize PORTSC for the type of PHY we are using. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ohci uses driver model wakeup flagsDavid Brownell
This makes OHCI use the driver model wakeup control bits for its root hub (e.g. disable on amd756, because of chip erratum) and for the controller itself. It no longer uses the hcd glue bits with those roles, and depends on the previous patch making the root hub available earlier. Note that on most platforms (boot code properly setting the RWC bit) this gives a partial workaround for the way PCI isn't currently flagging devices that support PME# signals. (Because of odd PCI init sequencing on PPC.) That's because many OHCI controllers support "legacy PCI PM" ... without involving any PCI PM capability. USB wakeup from STR, if it works on your system, may still involve tweaking things by hand in /proc/acpi/wakeup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: add support for OCHI on AT91rm9200Andrew Victor
This adds support for OHCI on AT91rm9200 based boards. Possibly of interest here is the way this uses <linux/clk.h> to gate clocks on/off during system pm state transitions. That's typical for non-PCI systems. Some can go further; Mini-A host side connectors enable ID-pin sensing. From: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI unlink tweaksDavid Brownell
This patch modifies the behavior of the EHCI driver in an unlink path that seems to be causing various issues on some systems. Those problems have included issues with disconnection, driver unbinding, and similar cases where urb unlinking would just not work right. This patch should help avoid those problems by not turning off the async (control/bulk) schedule until it's not expecting an "async advance" IRQ, which comes from the processing passing the schedule head. Whether the driver attempts to do such things is dependent on system timings, so many folk would never have seen these problems. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: OHCI for AU1200Jordan Crouse
ALCHEMY: Add OHCI support for AU1200 Updated by moving the OHCI support out of the EHCI patch. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI for AU1200Jordan Crouse
ALCHEMY: Add EHCI support for AU1200 Updated by removing the OHCI support Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI and Freescale 83xx quirkKumar Gala
On the MPC834x processors the multiport host (MPH) EHCI controller has an erratum in which the port number in the queue head expects to be 0..N-1 instead of 1..N. If we are on one of these chips we subtract one from the port number before putting it into the queue head. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI for Freescale 83xxRandy Vinson
Adding a Host Mode USB driver for the Freescale 83xx. This driver supports both the Dual-Role (DR) controller and the Multi-Port-Host (MPH) controller present in the Freescale MPC8349. It has been tested with the MPC8349CDS reference system. This driver depends on platform support code for setting up the pins on the device package in a manner appropriate for the board in use. Note that this patch requires selecting the EHCI controller option under the USB Host menu. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI full speed ISO bugfixesClemens Ladisch
This patch replaces the split ISO raw_mask calculation code in the iso_stream_init() function that computed incorrect numbers of high speed transactions for both input and output transfers. In the output case, it added a superfluous start-split transaction for all maxmimum packet sizes that are a multiple of 188. In the input case, it forgot to add complete-split transactions for all microframes covered by the full speed transaction, and the additional complete-split transaction needed for the case when full speed data starts arriving near the end of a microframe. These changes don't affect the lack of full speed bandwidth, but at least it removes the MMF errors that the HC raised with some input streams. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: EHCI and NF2 quirkDavid Brownell
This teaches the EHCI driver about a quirk seen in older NForce2 chips, adding a workaround to ignore selective suspend requests. Bus-wide (so-called "global") suspend still works, as does USB wakeup of a root hub that's globally suspended. There's still a hole in this support though. Strictly speaking, this should _fail_ selective suspend requests, rather than ignoring them, since doing it this way means that devices which should be able to issue remote wakeup are not going to be able to do that. For now, we'll just live with that problem ... since usbcore expects to do selective suspend on the way towards a full bus suspend, and usbcore needs to be able to do full bus suspend. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] handle errors returned by platform_get_irq*()David Vrabel
platform_get_irq*() now returns on -ENXIO when the resource cannot be found. Ensure all users of platform_get_irq*() handle this error appropriately. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: fix EHCI BIOS handshakeDavid Brownell
Fix http://bugzilla.kernel.org/show_bug.cgi?id=6128 Finish morphing the "early handoff" version of the EHCI BIOS handshake over to match the previous implementation inside the EHCI driver (except that now we forcibly disable the SMI). The version that had been with the PCI code was surprisingly full of bugs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <yazar256@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-13[PATCH] USB: sl811_cs needs platform_device conversion tooDavid Brownell
The switchover to "platform_driver" from "device_driver" missed one rather essential usage, which broke the sl811_cs driver ... this resolves the omission. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-13[PATCH] USB: fix up the usb early handoff logic for EHCIDavid Brownell
Disable some dubious "early" USB handoff code that allegedly works around bugs on some systems (we don't know which ones) but rudely breaks some others. Also make the kernel warnings reporting BIOS handoff problems be more useful, reporting the register whose value displays the trouble. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: Au1xx0: replace casual readl() with au_readl() in the driversSergei Shtylylov
au_readl() does needed byteswapping, etc. Cc: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@perex.cz> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB EHCI: fix gfp_t sparse warningRandy Dunlap
Fix sparse warning: drivers/usb/host/ehci-hcd.c:719:35: warning: incorrect type in argument 3 (different base types) drivers/usb/host/ehci-hcd.c:719:35: expected unsigned int [unsigned] mem_flags drivers/usb/host/ehci-hcd.c:719:35: got restricted unsigned int [usertype] mem_flags Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: isp116x-hcd: replace mdelay() by msleep()Olav Kongas
Replace mdelay() by msleep() in bus_suspend(); the rest of the system will gain 7ms. The related code is reorganized to minimize the number of locking/unlocking calls. The last hunk of the patch is the formatting change by Lindent. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: UHCI: No FSBR until device is configuredAlan Stern
Some USB devices don't enumerate well with FSBR turned on. This patch keeps devices on the low-speed part of the schedule (which doesn't use FSBR) until they have been fully configured. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: EHCI, another full speed iso fixClemens Ladisch
This patch adds a reinitializion for the uf variable that got modified by the preceding start-split bandwidth check. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: fix ehci early handoff issues warningAndrew Morton
Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: fix EHCI early handoff issuesDavid Brownell
This moves the previously widely-used ehci-pci.c BIOS handoff code into the pci-quirks.c file, replacing the less widely used "early handoff" version that seems to cause problems lately. One notable change: the "early handoff" version always enabled an SMI IRQ ... and did so even if the pre-Linux code said it was not using EHCI (and not expecting EHCI SMIs). Looks like a goof in a workaround for some unknown BIOS version. This merged version only forcibly enables those IRQs when pre-Linux code says it's using EHCI. And now it always forces them off "just in case". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-10Small fixups to the EHCI Kconfig help textJesper Juhl
Here's a small patch with a few tiny fixups for the EHCI Kconfig help text. Please consider applying. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-08[PATCH] fix more missing includesTim Schmielau
Include fixes for 2.6.14-git11. Should allow to remove sched.h from module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more to come since I haven't yet checked the other archs. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07Merge with Linus' kernel.Russell King
2006-01-06[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe ↵Dominik Brodowski
callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>