aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)Author
2006-08-31uhci-hcd: fix list access bugAlan Stern
When skipping to the last TD of an URB, go to the _last_ entry in the list instead of the _first_ entry (as780). This fixes Bugzilla #6747 and possibly others. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-31UHCI: don't stop at an Iso errorAlan Stern
Unlike other sorts of endpoint queues, Isochronous queues don't stop when an error is encountered. This patch (as772) fixes the scanning routine in uhci-hcd, to make it keep on going when it finds an Iso error. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: removed a unbalanced #endif from ohci-au1xxx.cYoichi Yuasa
This patch has removed a unbalanced #endif from ohci-au1xxx.c . Please apply before 2.6.18 release. Error message was: In file included from drivers/usb/host/ohci-hcd.c:909: drivers/usb/host/ohci-au1xxx.c:113:2: #endif without #if Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: UHCI: Don't test the Short Packet Detect bitAlan Stern
Apparently some UHCI controllers change the value of the Short Packet Detect (SPD) bit in the TD status word -- presumably when they receive a short packet. This patch (as759) changes uhci-hcd to avoid assuming that the bit is unchanged; in fact, the driver no longer looks at SPD at all. This fixes the second problem reported in Bugzilla #6752. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Fix Freescale high-speed USB host dependencyLi Yang
The high-speed USB SOC only exists on MPC834x family not MPC83xx family. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: AT91 OHCI updates, mostly power managementDavid Brownell
OHCI updates for AT91 series processors: - Get ready for at91sam926x processors (ARMv5tej not ARMv4t) - Suspend/resume support now behaves properly - In "standby" mode, OHCI can be a source of system wakeup events (remote wakeup, device connect/disconnect, etc) And minor cleanups. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: ehci: fix bogus alteration of a local variableDavid Brownell
In a rare and all-but-unused path, the EHCI driver could reuse a variable in a way that'd make trouble. Specifically, if the first root hub port gets an overcurrent event (rare) during a remote wakeup scenario (all but unused in today's Linux, except for folk working with suspend-to-RAM and similar sleep states), that would look like a fatal error which would shut down the controller. Fix by not reusing that variable. Spotted by Per Hallsmark <saxofon@musiker.nu> Fixes http://bugzilla.kernel.org/show_bug.cgi?id=6661 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohciKyle McMartin
Move variables only used on !__hppa__ into that #ifndef section. This cleans up a compiler warning on parisc. Problem pointed out by Joel Soete. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: OHCI hub code unaligned accessDavid Miller
I noticed this while debugging something unrelated on sparc64. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: ohci bits for the cirrus ep93xxLennert Buytenhek
This patch adds OHCI glue bits for the USB host interface in the Cirrus ep93xx (arm920t) CPU. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: au1200: EHCI and OHCI fixesDaniel Mack
I received an DBAU1200 eval kit from AMD a few days ago and tried to enable the USB2 port, but the current linux-2.6 GIT did not even compile with CONFIG_SOC_1200, CONFIG_SOC_AU1X00, CONFIG_USB_EHCI and CONFIG_USB_OHCI set. Furthermore, in ehci-hcd.c, platform_driver_register() was called with an improper argument of type 'struct device_driver *' which of course ended up in a kernel oops. How could that ever have worked on your machines? Anyway, here's a trivial patch that makes the USB subsystem working on my board for both OHCI and EHCI. It also removes the /* FIXME use "struct platform_driver" */. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: au1xxx: compile fixes for OHCI for au1200Domen Puncer
Compile fixes for au1200 ohci. First part looks a bit hackish... but it works for me. Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02[PATCH] irq-flags: usb: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] 64bit Resource: convert a few remaining drivers to use ↵Greg Kroah-Hartman
resource_size_t where needed Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] drivers: use list_move()Akinobu Mita
This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under drivers/. Acked-by: Corey Minyard <minyard@mvista.com> Cc: Ben Collins <bcollins@debian.org> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Alasdair Kergon <dm-devel@redhat.com> Cc: Gerd Knorr <kraxel@bytesex.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Pavlic <fpavlic@de.ibm.com> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: Andrew Vasquez <linux-driver@qlogic.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] clean up default value of USB_ISP116X_HCD, USB_SL811_HCD and ↵Jean-Luc Leger
USB_SL811_CS Default values for boolean and tristate options can only be 'y', 'm' or 'n'. This patch removes wrong default for USB_ISP116X_HCD, USB_SL811_HCD and USB_SL811_CS. Signed-off-by: Jean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-21[PATCH] USB: move hardware-specific <linux/usb_*.h> to <linux/usb/*.h>David Brownell
This moves header files for controller-specific platform data from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing some clutter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Improve FSBR-off timingAlan Stern
This patch (as707) improves the FSBR operation in uhci-hcd by turning it off more quickly when it isn't needed. FSBR puts a noticeable load on a computer's PCI bus, so it should be disabled as soon as possible when it isn't in use. The patch leaves it running for only 10 ms after the last URB stops using it, on the theory that this should be long enough for a driver to submit another URB if it wants keep FSBR going. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: remove hc_inaccessible flagAlan Stern
This patch (as706) removes the private hc_inaccessible flag from uhci-hcd. It's not needed because it conveys exactly the same information as the generic HCD_FLAG_HW_ACCESSIBLE bit. In its place goes a new flag recording whether the controller is dead. The new code allows a complete device reset to resurrect a dead controller (although usbcore doesn't yet implement such a facility). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: various updatesDavid Brownell
This patch (as705) contains a small set of updates for uhci-hcd written mostly by Dave Brownell: * Root hub suspend messages come out labeled as root hub messages; PCI messages should only come out when the pci device suspends. * Rename the reset() method to better match its init() role * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub suspend/resume errors. * When an URB fails, associate the message with the usb device not the host controller (it still hides endpoint and direction) From: David Brownell <david-b@pacbell.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: EHCI on non-Au1200 build fixRalf Baechle
Including ehci-au1xxx.c on a non-Au1200 Alchemy only to have it throw an error is stupid. From: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: negative index in drivers/usb/host/isp116x-hcd.cEric Sesterhenn
From: Eric Sesterhenn <snakebyte@gmx.de> This fixes coverity Bug #390. With the following code ret = ep->branch = balance(isp116x, ep->period, ep->load); if (ret < 0) goto fail; the problem is that ret and balance are of the type int, and ep->branch is u16. so the int balance() returns gets reduced to u16 and then converted to an int again, which removes the sign. Maybe the following little c program can explain it better:
2006-06-21[PATCH] improved TT scheduling for EHCIDan Streetman
This updates the EHCI driver by adding an improved scheduler for the transaction translators, found in USB 2.0 hubs and used for low and full speed devices. - adds periodic_tt_usecs() and some helper functions, which does the same thing that "periodic_usecs" does, except on the other side of the TT, i.e. it calculates the low/fullspeed bandwidth usage instead of highspeed. - adds a tt_available() function which is the new implementation of what tt_no_collision() does ... while tt_no_collision() ensures that each TT handles only 1 periodic transfer at a time (a very pessimistic approach) this version instead tracks bandwidth and allows each TT to handle as many transfers as will fit on each TT's downstream bus (closer to best-case). The new scheduler is selected by a config option, marked as EXPERIMENTAL so it can be tested (and more broadly reviewed) for a while until it seems safe to remove the original scheduler. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: remove ISO TDs as they are usedAlan Stern
This patch (as690) does the same thing for ISO TDs as as680 did for non-ISO TDs: free them as they are used rather than all at once when an URB is complete. At the same time it fixes a minor buglet (I'm not aware of it ever affecting anyone): An ISO TD should be retired when its frame is over, regardless of whether or not the hardware has marked it inactive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: store the period in the queue headerAlan Stern
This patch (as689) stores the period for periodic transfers (interrupt and ISO) in the queue header. This is necessary for proper bandwidth tracking (not yet implemented). It also makes the scheduling of ISO transfers a bit more rigorous, with checks for out-of-bounds frame numbers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: fix race in ISO dequeuingAlan Stern
This patch (as688) fixes a small race in uhci-hcd. Because ISO queues aren't controlled by queue headers, they can't be unlinked. Only individual URBs can. So whenever multiple ISO URBs are dequeued, it's necessary to make sure the hardware is done with each one. We can't assume that dequeuing the first URB will suffice to unlink the entire queue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: use integer-sized frame numbersAlan Stern
This patch (as687) changes uhci-hcd to keep track of frame numbers as full-sized integers rather than 11-bit values. This makes them a lot easier to handle and makes it possible to schedule beyond a 2-second window, should anyone ever want to do so. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Work around old Intel bugAlan Stern
Some old Intel UHCI controllers have a bug that has shown up in a few systems (the PIIX3 "Neptune" chip set). Until now there has not been any simple way to work around the bug, but the lastest changes in uhci-hcd have made it easy. This patch (as684) adds the work-around. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Reimplement FSBRAlan Stern
This patch (as683) re-implements Full-Speed Bandwidth Reclamation (FSBR) properly. It keeps track of which endpoint queues have advanced, and when none have advanced for a sufficiently long time, FSBR is turned off. The next TD on each of the non-moving queues is modified to generate an interrupt on completion, so that FSBR can be re-enabled as soon as the hardware starts to make some progress. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Eliminate the TD-removal listAlan Stern
This patch (as682) gets rid of the TD-removal list in uhci-hcd. It is no longer needed because now TDs are not freed until we know the hardware isn't using them. It also simplifies the code for adding and removing TDs to/from URBs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Move code for cleaning up unlinked URBsAlan Stern
This patch (as681) moves some code for cleaning up after unlinked URBs out of the general completion pathway into the unlinking pathway. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Remove non-iso TDs as they are usedAlan Stern
This patch (as680) frees non-isochronous TDs as they are used, rather than all at once when an URB is complete. Although not a terribly important change in itself, it opens the door to a later enhancement that will reduce storage requirements by allocating only a limited number of TDs at any time for each endpoint queue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] UHCI: Common result routine for Control/Bulk/InterruptAlan Stern
This patch (as679) combines the result routine for Control URBs with the routine for Bulk/Interrupt URBs. Along the way I eliminated the debugging printouts for Control transfers unless the debugging level is set higher than 1. I also eliminated a long-unused (#ifdef'ed-out) section that works around some buggy old APC BackUPS devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: UHCI: fix obscure bug in enqueue()Alan Stern
This patch (as676) fixes a small bug in uhci-hcd's enqueue routine. When an URB is unlinked or gets an error and the completion handler queues another URB for the same endpoint, the queue shouldn't be allowed to start up again until the handler returns. Not even if the new URB is the only one on its queue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: UHCI: store the endpoint type in the QH structureAlan Stern
This patch (as675) simplifies uhci-hcd slightly by storing each endpoint's type in the corresponding Queue Header structure. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: allow multiple types of EHCI controllers to be built as modulesKumar Gala
In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: EHCI works again on NVidia controllers with >2GB RAMPaul Serice
From: Paul Serice <paul@serice.net> The workaround in commit f7201c3dcd7799f2aa3d6ec427b194225360ecee broke. The work around requires memory for DMA transfers for some NVidia EHCI controllers to be below 2GB, but recent changes have caused some DMA memory to be allocated before the DMA mask is set. Signed-off-by: Paul Serice <paul@serice.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-08[ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budgetRichard Purdie
Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-08[PATCH] USB: fix bug in ohci-hcd.c ohci_restart()David Brownell
A loop on a power-lost resume path used the wrong index. I suspect khubd has been working around such bugs. Noticed by Andreas Mohr <andi@rhlx01.fht-esslingen.de>. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: Use new PCI_CLASS_SERIAL_USB_* definesJean Delvare
We could use the recently added PCI_CLASS_SERIAL_USB_UHCI, PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in more places, for slightly shorter and clearer code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: S3C2410: use clk_enable() to ensure 48MHz to OHCI coreBen Dooks
Get the "usb-bus" clock and ensure it is enabled when the OHCI core is in use. It seems that a few bootloaders do not enable the UPLL at startup, which stops the OHCI core having a 48MHz bus clock. The improvements to the clock framework for the s3c24xx now allow the USB PLL to be started and stopped when being used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: UHCI: don't track suspended portsAlan Stern
Someone recently posted a bug report where it turned out that uhci-hcd was disagreeing with the UHCI controller over whether or not a port was suspended: The driver thought it wasn't and the hardware thought it was. This patch (as665) fixes the problem and simplifies the driver by removing the internal state-tracking completely. Now the driver just asks the hardware whether a port is suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: at91 usb driver supend/resume fixesDavid Brownell
AT91: the two USB drivers (OHCI, UDC) got out of sync with various usbcore and driver model PM updates; fix. Also minor fixes to ohci: whitespace/style, MODULE_ALIAS so coldplug works using /sys/.../modalias, and turn off _both_ clocks during suspend. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: pci-quirks.c: proper prototypesAdrian Bunk
This patch adds a header file with proper prototypes for two functions in drivers/usb/host/pci-quirks.c. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: cleanups for ohci-s3c2410.cBen Dooks
Fix compile errors due to functions not being defined static Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-31[PATCH] pcmcia: use bitfield instead of p_state and stateDominik Brodowski
Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: add return value to _config() functionsDominik Brodowski
Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: remove dev_link_t and client_handle_t indirectionDominik Brodowski
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: embed dev_link_t into struct pcmcia_deviceDominik Brodowski
Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>