aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/misc
AgeCommit message (Collapse)Author
2009-10-09USB: usblcd, fix memory leakJiri Slaby
Stanse found a memory leak in lcd_probe. Instead of returning without releasing the memory, jump to the error label which frees it. http://stanse.fi.muni.cz/ Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-26headers: kref.h reduxAlexey Dobriyan
* remove asm/atomic.h inclusion from kref.h -- not needed, linux/types.h is enough for atomic_t * remove linux/kref.h inclusion from files which do not need it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23USB: full autosuspend and power management support for usbsevsegOliver Neukum
This patch adds to the usbsevseg driver: - suspend/resume support - reset_resume support - autosuspend using the display's power state to determine idleness Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com>
2009-09-23USB: full power management support for the idmouse driverOliver Neukum
usb: full runtime PM support for idmouse driver - add suspend/resume support - add reset_resume support - add support for autosuspend Signed-off-by: Oliver Neukum <oliver@neukum.org> Tested-by: Andreas Deresch <aderesch@fs.tum.de>
2009-09-23USB: ldusb should signal an error in poll if the device is disconnectedOliver Neukum
poll() should test for a disconnection of the device. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: legousbtower: make poll notice disconnectOliver Neukum
poll needs to return an error if a device is disconnected - make poll check for device's presence - wake all waiters in disconnect Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: sisusbvga: drop usb_buffer_allocPete Zaitcev
This patch falls out of my work to fix usbmon so it uses virtual addresses. It is not necessary, the "new" usbmon should work just fine with sisusbvga. However, it seems ridiculous that anyone would use uncached memory to transfer bulk data. Dropping the unnecessary use of usb_buffer_alloc should be beneficial here, in case anyone ever uses the dongle on anything beyond x86. I had no success in raising the author of the driver by e-mail, so the patch is not actually tested. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19Driver-Core: extend devnode callbacks to provide permissionsKay Sievers
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: usbtest: no need for USB_DEVICEFSAlan Stern
THis patch (as1270) allows the usbtest module to be built even when USB_DEVICEFS isn't configured. Tests can be performed without USB_DEVICEFS, using the /dev/bus/usb/*/* device files. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (143 commits) USB: xhci depends on PCI. USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries. USB: xhci: Respect critical sections. USB: xHCI: Fix interrupt moderation. USB: xhci: Remove packed attribute from structures. usb; xhci: Fix TRB offset calculations. USB: xhci: replace if-elseif-else with switch-case USB: xhci: Make xhci-mem.c include linux/dmapool.h USB: xhci: drop spinlock in xhci_urb_enqueue() error path. USB: Change names of SuperSpeed ep companion descriptor structs. USB: xhci: Avoid compiler reordering in Link TRB giveback. USB: xhci: Clean up xhci_irq() function. USB: xhci: Avoid global namespace pollution. USB: xhci: Fix Link TRB handoff bit twiddling. USB: xhci: Fix register write order. USB: xhci: fix some compiler warnings in xhci.h USB: xhci: fix lots of compiler warnings. USB: xhci: use xhci_handle_event instead of handle_event USB: xhci: URB cancellation support. USB: xhci: Scatter gather list support for bulk transfers. ...
2009-06-15USB: usbtest fix endless loop in unlink tests.Martin Fuzzey
In tests 11 and 12 if the URB completes with an error status (eg babble) the asynchrous unlink entered an endless loop trying to unlink a non resubmitted URB. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15usb: misc: SiS usbvga dangle: accept MUSB_HDRC as a fast enough host controllerBryan Wu
Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15Driver Core: usb: add nodename support for usb drivers.Kay Sievers
This adds support for USB drivers to report their requested nodename to userspace. It also updates a number of USB drivers to provide the needed subdirectory and device name to be used for them. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: remove phidget drivers from kernel tree.Greg Kroah-Hartman
These devices are better controlled with the LGPL userspace library found at: http://www.phidgets.com/downloads.php?os_id=3 and full documentation at: http://www.phidgets.com/documentation/web/cdoc/index.html Cc: Chester Fitchett <fitchett@phidgets.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: make transfer_buffer_lengths in struct urb field u32Greg Kroah-Hartman
Roel Kluin pointed out that transfer_buffer_lengths in struct urb was declared as an 'int'. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: misc/vstusb, fix lock imbalanceJiri Slaby
Make sure we don't leak locked vstdev->lock in vstusb_write. Unlock properly on one fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: misc/adutux, fix lock imbalanceJiri Slaby
Don't unlock adutux_mutex when not held. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: remove vernier labpro from ldusbsware
Labpro device is in both ldusb and vstusb device tables. Should only be a vstusb device. Signed-off-by: stephen ware <stephen.ware@eqware.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: emi26: fix oops on loadMarcin Slusarz
Fix oops introduced by commit ae93a55bf948753de0bb8e43fa9c027f786abb05 (emi26: use request_firmware()): usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice emi26 - firmware loader 1-1:1.0: emi26_probe start usb 1-1: firmware: requesting emi26/loader.fw usb 1-1: firmware: requesting emi26/bitstream.fw usb 1-1: firmware: requesting emi26/firmware.fw usb 1-1: emi26_set_reset - 1 usb 1-1: emi26_set_reset - 0 BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/firmware/1-1/loading Modules linked in: emi26(+) ipv6 cpufreq_ondemand coretemp arc4 ecb iwl3945 irtty_sir sir_dev nsc_ircc ehci_hcd uhci_hcd mac80211 irda usbcore snd_hda_intel thinkpad_acpi rfkill hwmon led_class e1000e snd_pcm cfg80211 snd_timer crc_ccitt snd snd_page_alloc aes_generic Pid: 5082, comm: modprobe Not tainted (2.6.28 #2) 17023QG EIP: 0060:[<f80dc487>] EFLAGS: 00010206 CPU: 0 EIP is at emi26_probe+0x2f7/0x620 [emi26] EAX: 0000015c EBX: 00000000 ECX: c1ffd9c0 EDX: 00000000 ESI: 0000015c EDI: f6bb215c EBP: f6bb0400 ESP: f00ebcfc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 5082, ti=f00ea000 task=f5c7c700 task.ti=f00ea000) Stack: 0000015c 000000a5 f6a67cb8 f80dc7e0 c01c6262 fbef2986 f6bb2000 00008fe0 0000015c f715f748 f715f740 f715f738 f715f748 f6a67c00 f80dd040 f80dcfc0 f6bb0400 fbacb290 f6a67c94 fbae0160 c01c70bf 00000000 f6a67c1c 00000000 Call Trace: [<c01c6262>] sysfs_add_one+0x12/0x50 [<fbacb290>] usb_probe_interface+0xa0/0x140 [usbcore] [<c01c70bf>] sysfs_create_link+0xf/0x20 [<c02dead2>] driver_probe_device+0x82/0x180 [<fbac9eeb>] usb_match_id+0x3b/0x50 [usbcore] [<c02dec4e>] __driver_attach+0x7e/0x80 [<c02de27a>] bus_for_each_dev+0x3a/0x60 [<c02de956>] driver_attach+0x16/0x20 [<c02debd0>] __driver_attach+0x0/0x80 [<c02de7b1>] bus_add_driver+0x1a1/0x220 [<c02dee4d>] driver_register+0x4d/0x120 [<c024e622>] idr_get_empty_slot+0xf2/0x290 [<fbacab71>] usb_register_driver+0x81/0x100 [usbcore] [<f806c000>] emi26_init+0x0/0x14 [emi26] [<c0101126>] do_one_initcall+0x36/0x1b0 [<c01c5e70>] sysfs_ilookup_test+0x0/0x10 [<c0197a61>] ifind+0x31/0x90 [<c01c6229>] __sysfs_add_one+0x59/0x80 [<c01c64e4>] sysfs_addrm_finish+0x14/0x1c0 [<c0175ca3>] __vunmap+0xa3/0xd0 [<c014b854>] load_module+0x1544/0x1640 [<c014b9d7>] sys_init_module+0x87/0x1b0 [<c0187f41>] sys_read+0x41/0x70 [<c01032a5>] sysenter_do_call+0x12/0x21 [<c03d0000>] wait_for_common+0x40/0x110 Code: 66 c1 e8 08 66 09 d0 75 a5 31 d2 89 e8 e8 72 fc ff ff 85 c0 0f 88 9a 02 00 00 b8 fa 00 00 00 e8 30 46 05 c8 8b 74 24 28 8b 5e 04 <8b> 03 89 44 24 1c 0f c8 89 44 24 1c 0f b7 4b 04 c7 44 24 20 00 EIP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] SS:ESP 0068:f00ebcfc ---[ end trace 2eefa13825431230 ]--- After the last "package" of firmware data is sent to the device, we dereference NULL pointer (on access to rec->addr). Fix it. Reported--by: David Flatz <david@upcs.at> Tested-by: David Flatz <david@upcs.at> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: stable <stable@kernel.org> [2.6.27, 2.6.28] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: power availability check for berry_chargeOliver Neukum
this introduces a sanity check into berry_charge to give up before damage is done if we lack juice. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: clean up redundant tests on unsignedroel kluin
temp, bytes and param->{length,sglen,vary} are unsigned so these tests do nothing. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: SISUSB2VGA driver: add 0x0711, 0x0903Albert Comerma
Signed-off-by: Albert Comerma <albert.comerma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: vstusb: fix compiler warning on x86-64Greg Kroah-Hartman
This fixes a reported compiler warning. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negativeroel kluin
length, sglen and vary are unsigned, so cannot be negative see vi drivers/usb/misc/usbtest.c +18 struct usbtest_param { ... unsigned iterations; unsigned length; unsigned vary; unsigned sglen; ... }; Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove err() macro from usb misc driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove err() and use the system-wide standard of dev_err() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb/misc driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove warn() macro from usb driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: fix up problems in the vtusb driverStephen Ware
Add range check on buffer sizes passed in from user space (max is 8*PAGE_SIZE) which will work for the most common spectrometers even at pages as small as 1K. Add kref to vst device structure to preserve reference to the usb object until we truly are done with it. From: Stephen Ware <stephen.ware@eqware.net> From: Dennis O'Brien <dennis.obrien@eqware.net> Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: ftdi-elan: Always pass usb_bulk_msg() a timeout in milliseconds.Sarah Sharp
The kernel doc for usb_bulk_msg() says the timeout for a bulk message should be specified in milliseconds. The ftdi-elan driver converts milliseconds to jiffies before passing the timeout to usb_bulk_msg(). This is mostly harmless, since it will just lead to very long timeouts, but was obviously not the intent of the original author. Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Acked-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17usb: vstusb.c : new driver for spectrometers used by Vernier Software & ↵Stephen Ware
Technology, Inc. This patch adds the vstusb driver to the drivers/usb/misc directory. This driver provides support for Vernier Software & Technology spectrometers, all made by Ocean Optics. The driver provides both IOCTL and read()/write() methods for sending raw data to spectrometers across the bulk channel. Each method allows for a configured timeout. From: Stephen Ware <stephen.ware@eqware.net> Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: drivers/usb/misc: Use an IS_ERR test rather than a NULL testJulien Brunel
In case of error, the function backlight_device_register returns an ERR pointer, but never returns a NULL pointer. So a NULL test that may come after a call to this function should be strengthened by an IS_ERR test. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match_bad_null_test@ expression x, E; statement S1,S2; @@ x = backlight_device_register(...) ... when != x = E * if (x != NULL) S1 else S2 // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: Added driver for a Delcom USB 7-segment LED DisplayHarrison Metzger
Added basic support for a Delcom USB 7-segment LED Display Signed-off by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16device create: usb: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-21USB: sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp.Stefan Lippers-Hollmann
sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp. usb 1-2: new high speed USB device using ehci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: USB2VGA dongle found at address 4 usb 1-2: Allocated 8 output buffers usb 1-2: 8MB 1 ch/1 r SDR SDRAM, bus width 32 usb 1-2: New USB device found, idVendor=0711, idProduct=0918 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Signed-off-by: Stefan Lippers-Hollmann <s.L-H@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13usb: auerswald: remove driver (obsolete)Wolfgang Mües
This patch removes the auerswald USB driver from the linux kernel 2.6.26. This driver was included into the kernel mainly to connect to the ISDN framework. This was done in linux 2.4.x. For 2.6.x, due to the fragile and moving ISDN support, this connection was never realized, and the only use of this driver was for device configuration. In the age of DSL, the demand of ISDN support is getting very low. Meanwhile, with the advent of libusb, an userspace driver was done for the device configuration which works fine for linux and mac. (Thanks to the libusb developers!). The userspace driver is downloadable from the auerswald web site. So this driver is obsolete now and has to be removed. Many thanks to all developers which helped me to bring this driver up and working. Signed-off-by: Wolfgang Muees <wolfgang@iksw-muees.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-12isight_firmware: fix a leak and double kfree()Parag Warudkar
Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Rename WARN() to WARNING() to clear the namespaceArjan van de Ven
We want to use WARN() as a variant of WARN_ON(), however a few drivers are using WARN() internally. This patch renames these to WARNING() to avoid the namespace clash. A few cases were defining but not using the thing, for those cases I just deleted the definition. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Greg KH <greg@kroah.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-21USB: sisusb: Push down the BKLAlan Cox
This is another case where the lock_kernel appears to be unneccessary and could be removed with a bit more investigative work Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: rio100: Push down the BKLAlan Cox
The BKL is actually probably not needed as the mutex seems sufficient. If so then a further patch to drop it would be a good followup. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: auerwald: Push down the BKL into the driverAlan Cox
Also fix the unknown ioctl return code Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: iowarrior: Push down BKLAlan Cox
I'm pretty sure the mutex is sufficient for all locking but will come back to that later if the USB folks don't beat me to it. For now get rid of the old BKL ioctl method and wrap the ioctl handler Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: usblcd: Push down BKL into driverAlan Cox
I'm pretty sure this can be eliminated however I couldn't prove (or find) what stopped the device vanishing mid IOCTL_GET_HARD_VERSION. Perhaps a USB wizard could double check that and see if the lock_kernel can go entirely. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: ftdi_usb: Eliminate ioctl and BKL ioctl useAlan Cox
ftdi has one ioctl, which is buggy and for debugging. Kill it off Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-10emi62: use request_firmware()David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10emi26: use request_firmware()David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10isight: treat firmware data as constgregkh@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>