aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2009-01-27USB: option: add QUANTA HSDPA Data Card device idsAlex.Cheng@quantatw.com
This patch adds the support for the QUANTA Q101 series HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: Alex Cheng <alex.cheng@quantatw.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: new id for ti_usb_3410_5052 driverOliver Neukum
This adds a new device id Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: 'option' driver - onda device MT503HS has wrong idMarcel Sebek
While trying to make GSM modem Onda MT503HS working, I found a mismatch between device id in the driver code (0x0200) and id in the lsusb output (0x2000). This patch fixed it for me, but I don't know if the original device id was also correct and the new ID should be added instead of replacing the old one. Signed-off-by: Marcel Sebek <sebek64@post.cz> Acked-by: Domenico Riccio <domenico.riccio@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: ftdi_sio driver support of bar code scanner from DieboldMhayk Whandson
Added the product id of bcs(bar code scanner) from Diebold Procomp Brazil. Signed-off-by: Mhayk Whandson <eu@mhayk.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: ftdi_sio: added Alti-2 VID and Neptune 3 PIDRobie Basak
This patch adds the vendor and product ID for the Alti-2 Neptune 3 (http://www.alti-2.com) which uses the FTDI chip. Signed-off-by: Robie Basak <rb-oss-1@justgohome.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: cp2101 deviceTomasz K
My girl use modem GSM (EDGE) Commanader 2 on iPlus Polsih provider, PLEASE add this vendor=0x10C4 and product=0x822B to USB serial driver cp2101.c From: Tomasz K <eros81@o2.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: cp2101: add fasttrax GPS evaluation kit vendor/product IDWolfgang Glas
This adds the vendor/product ID of the fasttrax GPS evaluation kit from: http://www.fastraxgps.com/products/evaluationtools/evaluationkit/ to the cp2101 module since this device is actually equipped with a CP210x USB to serial bridge. The vendor/product ID is: 0x10c4/0x826b. Signed-off-by: Wolfgang Glas <wolfgang.glas@ev-i.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-15ftdi_sio: fix kref leakJim Paris
Commit 4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8c added kref stuff to ftdi_sio, but missed tty_kref_put at one exit point in ftdi_process_read. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: add Multi-Tech firmwareChris Adams
Add the Multi-Tech cellular modem firmware to the TI USB serial driver. This firmware was extracted from: ftp://ftp.multitech.com/wireless/wireless_linux.zip Firmware licence: "all firmware components are redistributable in binary form" per support@multitech.com Copyright (C) 2005 Multi-Tech Systems, Inc. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: add Multi-Tech modem supportChris Adams
Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: support alternate firmwareChris Adams
The TI USB serial driver supports specifying alternate vendor and product IDs (since the chips can and are used in devices under other vendor/product IDs). However, the alternate IDs were not loaded in the combined product table. This patch also adds support for loading alternate firmware for alternate vendor/product IDs. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12usb-serial: remove NULL checkAlan Cox
Julia Lawell found a case where a NULL check was misplaced in the usb-serial code. However as the object in question cannot be NULL the check can simply be removed. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07USB: add siemens_mpi usb-serial "stub" driverGreg Kroah-Hartman
This driver got rescued from a few years ago and was requested to be added. So I cleaned it up, ported it to the latest kernel version and here it is. Cc: Thomas Hergenhahn <thomas.hergenhahn@suse.de> Cc: Emmanuele <iemmav@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: add new opticon serial driverGreg Kroah-Hartman
This is for the serial mode of the Opticon barcode scanner. Cc: Kees Stoop <kees.stoop@opticon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: option: increase outgoing buffer size and numberGreg Kroah-Hartman
This should speed up the option driver's upload speed quite a bit. It has been tested by a number of different people on different devices with success. Cc: Roland Wolters <roland.wolters@credativ.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: serial: fix up urb->status usageGreg Kroah-Hartman
Some of the usb-serial drivers are starting to use urb->status in ways they should not be doing. This fixes up some of them to prevent that. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: serial: usb_debug: Make staticRoel Kluin
Sparse asked whether these could be static. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: serial: ipw.c: mark {__init|__exit} for usb_ipw_{init|exit}Qinghuang Feng
mark {__init|__exit} for usb_ipw_{init|exit} () Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-02tty: Drop the lock_kernel in the private ioctl hookAlan Cox
We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: USB tty devices can block in tcdrain when unpluggedAlan Cox
The underlying problem is that the device methods don't all correctly handle disconnected status and some keep reporting bytes pending which causes tcdrain to stall. When the cable is unplugged they are definitely gone, and as this is true for all USB cables we can fix it in the core usb serial code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Add device function for USB serial consoleKevin Hao
Add device funtion for usb serial console, so we can open /dev/console when we use a usb serial device as console. (Typecast removed as noted by Sergei Shtylyov) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: Fix close races in USB serialAlan Cox
USB serial has always had races where the tty port usage count can hit zero during a receive event. The internal locking is a mutex so we can't use that in the IRQ handlers. With krefs we can tackle this differently but we still need to be careful. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02sierra: Fix formattingAlan Cox
Andrew Morton wrote: in drivers/usb/serial/sierra.c: } else { if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); tty_buffer_request_room(tty, urb->actual_length); it's missing a tab. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-17USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole displayMike Provencher
Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher <mike.provencher@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: set correct configuration in probe of ti_usb_3410_5052Oliver Neukum
This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: add 5372:2303 to pl2303Matthew Arnold
This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: Matthew D Arnold <matthew.arnold-1@uts.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: ftdi_sio: Adding Ewert Energy System's CANdapter PIDAndrew Ewert
The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert <andrew@ewertenergy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: tty: SprogII DCC controller identifiersAlan Cox
Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-05Fix incorrect use of loose in tty/serial driversNick Andrew
[Folded together as one diff from 3] It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-01Add kref to fake tty used by USB consoleKevin Hao
We alloc a fake tty in usb serial console setup function. we should init the tty's kref otherwise we will face WARN_ON after following invoke of tty_port_tty_set --> tty_kref_get. Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30USB: serial: add more Onda device ids to option driverGreg Kroah-Hartman
Thanks to Domenico Riccio for pointing these out. Cc: Domenico Riccio <domenico.riccio@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19USB: ACE1001 patch for cp2101.cM Kondrin
The patch which adds IDs for AKTAKOM USB->RS232 cable (http://www.aktakom.ru/product/kio/ace-1001.htm) is attached. From: M Kondrin <mkondrin@hppi.troitsk.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13+ usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm treeDamir N Abdullin
Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by: Damir N Abdullin <damir@mimas.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: CP2101 Add device ID for AMB2560Craig Shelley
This patch adds the device vendor and product IDs for Amber Wireless AMB2560 Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: Add YISO u893 usb modem vendor and product IDs to option driverLeslie Watter
This patch adds YISO u893 usb modem vendor and product ID to option.c. I had a better experience using this modification and the same system. Signed-off-by: Leslie Harlley Watter <leslie@watter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-11tty: trivial - fix up email addresses in tty related stuffAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30tty: Fix USB kref leakAlan Cox
When we close we must clear the extra reference we got when we read port->tty. Setting the port tty NULL will clear the kref held by the driver but not the one we obtained ourselves while doing the lookup. Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: Helge Hafting <helge.hafting@aitel.hist.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-22USB: support Huawei data card product IDsfangxiaozhi
In this patch, we want to do one thing: add more Huawei product IDs into the USB driver. Then it can support more Huawei data card devices. So to declare the unusual device for new Huawei data card devices in unusual_devs.h and to declare more new product IDs in option.c. To modify the data value and length in the function of usb_stor_huawei_e220_init in initializers.c That's because based on the USB standard, while sending SET_FETURE_D to the device, it requires the corresponding data to be zero, and its sending length also must be zero. In our old solution, it can be compatible with our WCDMA data card devices, but can not support our CDMA data card devices. But in this new solution, it can be compatible with all of our data card devices. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22USB: add ZTE MF626 USB GSM modem entryMikhail Gusarov
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove use of err() in drivers/usb/serialGreg Kroah-Hartman
err() is going away, so switch to dev_err() or printk() if it's really needed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: remove info() macro from usb/serial driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: option: add Pantech cardsDan Williams
Add some Pantech mobile broadband IDs. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: Option / AnyData new modem, same IDJon K Hellan
The AnyData ADU-310 series of wireless modems uses the same product ID as the ADU-E100 series. Signed-off-by: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: ti_usb_3410_5052: removed duplicated includeHuang Weiyi
Removed duplicated #include <linux/firmware.h> in drivers/usb/serial/ti_usb_3410_5052.c. Signed-off-by: Huang Weiyi <hwy@cn.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB Serial: Sierra: debug message fixKevin Lloyd
This patch moves dbg calls to dev_dbg where possible. It also fixes some issues with a previous submission aiming to do the same thing. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: ftdi_sio: fix 'product' parameter descriptionPaulius Zaleckas
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: Add Oceanic product ID to ftdi_sioVladimir Vukicevic
Add Oceanic PID to ftdi_sio driver Oceanic dive computers (such as the VT3 -- http://www.oceanicworldwide.com/p_computers_vt3.html) all use an onboard FTDI serial converter, with the FTDI vid and a PID of 0xf460. The attached patch adds that pid to ftdi_sio; driver connects to my VT3 after that. Signed-off-by: Vladimir Vukicevic <vladimir@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: option.c remove duplicate device ids now supported in hso.cDenis Joseph Barrow
Remove duplicate device ids which are now supported by drivers/usb/net/hso.c Signed-off-by: Denis Joseph Barrow <D.Barow@option.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: option: add Ericsson F3507g and Dell 5530Dan Williams
Add a few more mobile broadband cards. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13tty: usb-serial krefsAlan Cox
Use kref in the USB serial drivers so that we don't free tty structures from under the URB receive handlers as has historically been the case if you were unlucky. This also gives us a framework for general tty drivers to use tty_port objects and refcount. Contains two err->dev_err changes merged together to fix clashes in the -next tree. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 06:03:43 +0000