aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/storage
AgeCommit message (Collapse)Author
2005-06-27[PATCH] USB Storage: retry hard errorsMatthew Dharm
This patch started life as as527, and was rediffed by me. Since the IDE interface doesn't convey much information about types of errors, many USB-IDE adapters report all low-level errors with SK = 0x04, which is supposed to be used only for non-recoverable errors. As a result the SCSI midlayer doesn't retry the command. But quite often a retry would succeed, whereas an unnecessary retry doesn't really hurt anything. This patch uses a recently-implemented flag to tell the SCSI midlayer that such hardware errors should be retried. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] USB Storage: port reset on transport errorMatthew Dharm
This patch causes a port reset whenever there's a transport error or abort. If that fails it reverts back to doing a mass-storage device reset. It started life as as497 and was rediffed by me. This makes error recovery a lot quicker and more reliable. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] USB Storage: endpoint toggles and reset delaysMatthew Dharm
This patch does two things to help reset recovery. It started life as as496 and was rediffed by me. First, the patch checks the result of a CLEAR_HALT request and doesn't reset the endpoint's data toggle unless the request succeeded. Second, it reduces the timeout for a device reset from 20 seconds to 5 seconds. If all goes well, then I've finally figured quilt out and this patch should apply cleanly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-25[PATCH] Cleanup patch for process freezingChristoph Lameter
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-20[PATCH] Driver Core: drivers/usb/input/aiptek.c - ↵Yani Ioannou
drivers/zorro/zorro-sysfs.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-17merge by hand (fix up qla_os.c merge error)James Bottomley
2005-06-17[SCSI] allow sleeping in ->eh_bus_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_device_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_abort_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03[PATCH] USB Storage: Add unusual_devs for Trumpion Voice RecorderPhil Dibowitz
The original entry of this patch was submitted by Filippo Bardelli <filibard@libero.it>, with cleanups and patch-ification by me. This corrects the subclass that the device reports. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] USB: Spelling fixes for drivers/usb.Steven Cole
Here are some spelling corrections for drivers/usb. cancelation -> cancellation succesful -> successful cancelation -> cancellation decriptor -> descriptor Initalize -> Initialize wierd -> weird Protocoll -> Protocol occured -> occurred successfull -> successful Procesing -> Processing devide -> divide Isochronuous -> Isochronous noticable -> noticeable Basicly -> Basically transfering -> transferring intialize -> initialize Incomming -> Incoming additionnal -> additional asume -> assume Unfortunatly -> Unfortunately retreive -> retrieve tranceiver -> transceiver Compatiblity -> Compatibility Incorprated -> Incorporated existance -> existence Ununsual -> Unusual Signed-off-by: Steven Cole <elenstev@mesatop.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] USB: unusual_devs entry for Minolta Dimage Z10Phil Dibowitz
This patch adds an unusual_devs entry for the Minolta Dimage Z10. Originally reported by Vilisas <vilisas@xxx.lt> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] USB: unusual_devs.h: atmel snd1 storageVivian Bregier
Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] USB Storage: fix compile errorMatthew Dharm
This patch fixes a compiler error caused by a missing prototype. It should apply directly to Greg KH's usb-2.6.git tree. Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22[PATCH] USB: clean up all iPod models in unusual_devs.hSven Anderson
Phil Dibowitz wrote: > 1. You're adding product IDs 1202, 1203, 1204, and 1205. 1203 was > already there, but you remove it, OK, but 1205 is already there, so > you'll need to fix that. I was not removing 1203, it's just the extension of the bcd range. You are right about 1205, as I wrote, it was a patch against 2.6.11.7. Attached is a patch against 2.6.12-rc2. > 2. I'm OK with the full bcd range if Apple is changing it on firmware > revs... fine, but it's bcd, not hex... 0x9999 =) I just copied from other entries. There're a lot 0xffffs in unusual_dev.h, so I assumed it is correct. I changed it to 0x9999. > 3. It's rather obnoxious to take the original submitter's credit away. I didn't remove it, I changed it to "based on...". Because I changed something (the range) in his entry, I thought it is the best to take the responsibility but keep the origin. Anyway, in the new patch I did it in a different way. > 4. Your /proc/bus/usb/devices shows 1204, but I see no evidence 1202 is > really an iPod. I don't have an old iPod mini, but you find a lot of evidence here: http://www.google.com/search?q=0x1202+ipod Especially this one: http://www.qbik.ch/usb/devices/showdescr.php?id=2737 > It also looks like 1205's entry is getting mangled, but I haven't > attempted to apply the patch, so I'm not sure. No, the patch was ok, but I agree it looks strange. It's not very readable, because I cannot tell diff to work blockwise instead of linewise. Because of the similarity of the entries, diff splits and merges them. Anyway, the new patch "looks" better. ;-) Signed-off-by: Sven Anderson <sven-linux@anderson.de> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-18[PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULLJesper Juhl
Get rid of a bunch of redundant NULL pointer checks in drivers/usb/*, there's no need to check a pointer for NULL before calling kfree() on it. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/class/audio.c ===================================================================
2005-04-18[PATCH] USB Storage unusual_dev.h 07c4:a10b Datafab Systems, Inc.felix@derklecks.de
Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/storage/unusual_devs.h ===================================================================
2005-04-18[PATCH] Fix GO_SLOW delayPhil Dibowitz
This patch changes the delay for the US_FL_GO_SLOW patch from 110us to 125. Some delays need this extra delay includign Jan De Luyck's drive which spawned the original increase from 110 to 110us. 125 is a microframe, so this delay seems to make sense more than just be a random delay (thanks to David Brownell for pointing that out after my original patch). Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/usb/storage/transport.c ===================================================================
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!