aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2008-05-12Fix c67x00-ll-hpi compilation failure (bug #10627)Fernando Luis Vázquez Cao
This patch fixes bug #10627 which caused the compilation error below. CC [M] drivers/usb/c67x00/c67x00-ll-hpi.o drivers/usb/c67x00/c67x00-ll-hpi.c: In function `ll_recv_msg': drivers/usb/c67x00/c67x00-ll-hpi.c:243: erreur: `HZ' undeclared (first use in this function) drivers/usb/c67x00/c67x00-ll-hpi.c:243: erreur: (Each undeclared identifier is reported only once drivers/usb/c67x00/c67x00-ll-hpi.c:243: erreur: for each function it appears in.) Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-11usb-serial: Add ThinkOptics WavITBernhard Beck
Add ThinkOptics WavIt to cp2101 device table Signed-off-by: Bernhard Beck <kernel@goodcoffee.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08fix irq flags for iuu_phoenix.cSteven Rostedt
The file drivers/usb/serial/iuu_phoenix.c uses "int" for flags. This can cause hard to find bugs on some architectures. This patch converts the flags to use "long" instead. This bug was discovered by doing an allyesconfig make on the -rt kernel where checks are done to ensure all flags are of size sizeof(long). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-06usb: Sparc build fix, make USB_ISP1760_OF depend on PPC_OFDavid S. Miller
Sparc doesn't have some of the OF interfaces this driver wants to use. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic94xx: fix section mismatch [SCSI] u14-34f: Fix 32bit only problem [SCSI] dpt_i2o: sysfs code [SCSI] dpt_i2o: 64 bit support [SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt to dma_alloc_coherent [SCSI] dpt_i2o: use standard __init / __exit code [SCSI] megaraid_sas: fix suspend/resume sections [SCSI] aacraid: Add Power Management support [SCSI] aacraid: Fix jbod operations scan issues [SCSI] aacraid: Fix warning about macro side-effects [SCSI] add support for variable length extended commands [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer [SCSI] bsg: add large command support [SCSI] aacraid: Fix down_interruptible() to check the return value correctly [SCSI] megaraid_sas; Update the Version and Changelog [SCSI] ibmvscsi: Handle non SCSI error status [SCSI] bug fix for free list handling [SCSI] ipr: Rename ipr's state scsi host attribute to prevent collisions [SCSI] megaraid_mbox: fix Dell CERC firmware problem
2008-05-02USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance, ↵David Lopo
clear-feature ignore Gadget tells controller driver to ignore Clear-Feature(HALT_ENDPOINT) Signed-off-by: David Lopo <lopo.david@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2008-05-02usb_serial: some coding style fixesAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: Remove redundant dependencies on USB_ATM.Robert P. J. Day
Given that the bulk of the Kconfig file is enclosed in "if USB_ATM", remove the unnecessary dependencies. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: UHCI: disable remote wakeup when it's not neededAlan Stern
This patch (as1084b) fixes the way uhci-hcd handles polling and remote wakeups for its root hubs. When remote wakeup is disabled, neither interrupts nor polling should be enabled during a root-hub suspend. Likewise, if interrupts are enabled during suspend then polling isn't needed. Furthermore the EGSM (Enter Global Suspend Mode) bit shouldn't be set in the Command register unless remote wakeup is enabled. Apparently some controllers will issue a remote-wakeup interrupt whenever EGSM is on, even if Resume-Detect interrupts are supposedly disabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: OHCI: work around bogus compiler warningAlan Stern
The patch (as1086) works around a bogus "uninitialized variable" warning generated by some versions of GCC. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add Cypress c67x00 OTG controller HCD driverPeter Korsgaard
This patch adds HCD support for the Cypress c67x00 family of devices. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add Cypress c67x00 OTG controller core driverPeter Korsgaard
This patch add the core driver for the c67x00 USB OTG controller. The core driver is responsible for the platform bus binding and creating either USB HCD or USB Gadget instances for each of the serial interface engines on the chip. This driver does not directly implement the HCD or gadget behaviours; it just controls access to the chip. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add Cypress c67x00 low level interface codePeter Korsgaard
This patch adds the low level support code for the Cypress c67x00 family of OTG controllers. The low level code is responsible for register access and implements the software protocol for communicating with the 16bit microcontroller inside the c67x00 device. Communication is done over the HPI interface (16bit SRAM-like parallel bus). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: airprime: unlock mutex instead of trying to lock it againLeonardo Chiquitto
The following patch fixes a [probable] copy & paste mistake in airprime.c. Instead of unlocking an acquired mutex, the actual code tries to lock it again. Signed-off-by: Leonardo Chiquitto <lchiquitto@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: storage: Update mailling list addressAndrew Lunn
drivers/usb/storage/unusual_devs.h lists the address linux-usb-devel@lists.sourceforge.net for patches to that file. This address results in a bounce and a pointer to vger. This patch updates the address in the header file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame.Andrew Lunn
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: add more FTDI device idsPeter Mack
Add more usb device ids to the ftdi driver. From: Peter Mack <Peter.Mack@scs-ptc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: fix cannot work usb storage when using ohci-sm501Yoshihiro Shimoda
When I used ohci-sm501, hcd_alloc_coherent() in map_urb_for_dma() is not called, because usb_sg_init() always sets URB_NO_TRANSFER_DMA_MAP. dmesg (CONFIG_USB_STORAGE_DEBUG enabled): usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries usb-storage: Status code -75; transferred 0/36 usb-storage: -- babble usb-storage: Bulk data transfer result 0x3 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x2 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: gadget zero timer init fixDavid Lopo
Initialize timer earlier so if an error occurs allocating USB request or buffer request (zero_bind) Gadget Zero will not hang trying to delete an uninitialized timer (zero_unbind). Signed-off-by: David Lopo <lopo.david@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: gadget zero style fixups (mostly whitespace)David Brownell
Minor updates to "Gadget Zero". - Primarily these are whitespace updates to address the fact that since this was written, Documentation/CodingStyle was changed to disapprove of parts of the original coding style. - Update a few comments that weren't quite correct, notably mentioning the "autoresume" module parameter. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb serial gadget: CDC ACM fixesDavid Brownell
Based on a patch from <Aurel.Thomi@ruag.com>, this makes the CDC-ACM support in the serial gadget handle the SET_LINE_CODING and SET_CONTROL_LINE_STATE requests ... which should improve interop with at least MS-Windows "usbser.sys" if not some other ACM host drivers. It also adds a few REVISIT comments where this code plays a bit loose with the CDC ACM spec. If this were used to hook up to a real RS232 or modem link, those places would need a bit of work. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: pxa27x_udc driverRobert Jarzmik
Adds pxa27x udc driver to support USB peripherals on pxa27x chips. The driver is compatible with: Gadget Zero, the File Storage gadget, and the Ethernet gadget (only in CDC subset mode). The driver can't properly support multiple interfaces, because of hardware bugs without possible workaround. That means no RNDIS support from g_ether, and no CDC ACM support in g_serial. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: INTOVA Pixtreme camera mass storage deviceRohan Hart
FIX_CAPACITY is all that's needed. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: mos7840: test and propagate set_uart_reg return valueRoel Kluin
The test for an mos7840_set_uart_reg() error return value only works when status is signed. propagate its error value. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: SL Baur <steve@xemacs.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: usbtest displays diagnostics againDavid Brownell
Minor cleanup to the "usbtest" driver, mostly to resolve a regression: all the important diagnostics were at KERN_DEBUG, so that when the "#define DEBUG" was removed from the top of that file it stopped providing diagnostics. Fix by using KERN_ERROR. Also: - Stop using the legacy dbg() calls - Simplify the internal debug macros - Correct some test descriptions: * Test #10 subcase 7 should *always* stall * Test #10 subcase 8 *may* stall - Diagnostic about control queue test failures is more informative - Fix some whitespace "bugs" And add a warning about the rude interaction between usbfs ioctl() and khubd during device disconnect ... don't unplug a device under test, that will wedge. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: libusual kthread_run() called with wrong format.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb-storage: add unusual_devs entry for Samsung YP-U3Alan Stern
This patch (as1088) adds an unusual_devs entry for Samsung's YP-U3. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: storage/onetouch.c: make a function staticAdrian Bunk
This patch makes the needlessly global onetouch_release_input() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb-storage: fix build failure in OneTouch driverDmitry Torokhov
If USB storage is built-in but input subsystem is made modular then OneTouch button functionality can not be selected. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02usb: ldusb: ld_usb semaphore to mutexDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02USB: ISP1760 HCD driverSebastian Siewior
This driver has been written from scratch and supports the ISP1760. ISP1761 might (should) work as well but the OTG isn't supported. Also ISO packets are not. However, it works on my little PowerPC board. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02[SCSI] Let scsi_cmnd->cmnd use request->cmd bufferBoaz Harrosh
- struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-30tty: The big operations reworkAlan Cox
- Operations are now a shared const function block as with most other Linux objects - Introduce wrappers for some optional functions to get consistent behaviour - Wrap put_char which used to be patched by the tty layer - Document which functions are needed/optional - Make put_char report success/fail - Cache the driver->ops pointer in the tty as tty->ops - Remove various surplus lock calls we no longer need - Remove proc_write method as noted by Alexey Dobriyan - Introduce some missing sanity checks where certain driver/ldisc combinations would oops as they didn't check needed methods were present [akpm@linux-foundation.org: fix fs/compat_ioctl.c build] [akpm@linux-foundation.org: fix isicom] [akpm@linux-foundation.org: fix arch/ia64/hp/sim/simserial.c build] [akpm@linux-foundation.org: fix kgdb] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30usb gadget: switch to put_char returning intAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29usb: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29usb: use non-racy method for proc entries creationDenis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29proc: remove proc_busAlexey Dobriyan
Remove proc_bus export and variable itself. Using pathnames works fine and is slightly more understandable and greppable. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28drivers/usb annotations and fixesAl Viro
* endianness annotations * endianness fixes * missing get_unaligned/put_unaligned It's pretty much all over the place, changes to different files are independent. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Serial-parts-Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24usb: don't update devnum for wusb devicesDavid Vrabel
For WUSB devices, usb_dev.devnum is a device index and not the real device address (which is managed by wusbcore). Therefore, only set devnum once (in choose_address()) and never change it. Signed-off-by: David Vrabel <david.vrabel@csr.com> Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24wusb: make ep0_reinit available for modulesInaky Perez-Gonzalez
We need to be able to call ep0_reinit() [renamed to usb_ep0_reinit()] from the WUSB security code. The reason is that when we authenticate the device, it's address changes (from having bit 7 set to having it cleared). Thus, we need to signal the USB stack to reinitialize EP0, so the status with the previous address kept at the HCD layer is cleared and properly reinitialized. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24wusb: devices dont use a set addressInaky Perez-Gonzalez
A WUSB device gets his address during the connection phase; later on, during the authenthication phase (driven from user space) we assign the final address. So we need to skip in hub_port_init() the actual setting of the address for WUSB devices. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24wusb: teach choose_address() about wireless devicesInaky Perez-Gonzalez
Modify choose_address() so it knows about our special scheme of addressing WUSB devices (1:1 w/ port number). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: remove unnecessary type casting of urb->contextMing Lei
urb->context code cleanup Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24usb serial: more fixes and groundwork for tty changesAlan Cox
- If a termios change fails due to lack of memory we should copy the old settings back over as the device has not changed - Note various locking problems - kl5kusb105 had various remaining tty flag handling problems - Make safe_serial use tty_insert_flip_string not open coded loops - set termios speed properly in usb_serial Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: usbfs: export the URB_NO_INTERRUPT flag to userspaceAlan Stern
This patch (as1079) cleans up the way URB_* flags are exported in usbfs. The URB_NO_INTERRUPT flag is now exported (this is the only behavioral change). USBDEVFS_URB_* macros are added for URB_NO_FSBR, URB_ZERO_PACKET, and URB_NO_INTERRUPT, making explicit the fact that the kernel accepts them. The flag matching takes into account that the URB_* values may change as the kernel evolves, whereas the USBDEVFS_URB_* values must remain fixed since they are a user API. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: fix compile problems in ehci-hcdAlan Stern
This patch (as1072) fixes some recently-introduced compile problems that show up in ehci-hcd when CONFIG_PM is turned off. PORT_WAKE_BITS needs to be defined always. ehci_port_power() is called during initialization by all the EHCI variants other than the PCI version, in which it is "defined but not used". So add a call to it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: ehci: qh_completions cleanup and bugfixDavid Brownell
Simplify processing of completed qtds, and correct handling of short reads, by removing two state variables: - "qtd_status" wasn't needed. The current URB's status is either OK (-EINPROGRESS) or some fault status. Once a fault appears, the queue halts and any later QTDs are immediately removed, so no temporary status is needed. (Or for typical short reads, it's not treated as a fault, so no queue halt is needed.) - "do_status" was erroneous. Because of how the queue is set up, short control reads can (and should!) be treated like full size reads, and cleaned up the usual way. The status stage will be executed transparently, and usbcore handles the choice of whether to report this status as unexected. The "do_status" problem caused a rather perplexing timing-dependent problem with usbtest case 10. Sometimes it would make the controller skip a dozen transactions while (wrongly) trying to clean up after a short transfer. Fortunately, removing a dcache contention issue made this become trivial to reproduce (on one test rig), so enough clues finally presented themselves ... I think this has been around for a very long time, but was worsened by recent urb->status changes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: cdc-acm: signedness fixDavid Brownell
Fix bogus assignment of "unsigned char *" to "char *": preserve unsignedness. These values are used directly as descriptor lengths when iterating through the buffer, so this *could* cause oddness that potentially includes oopsing. (IMO not likely, except as part of a malicious device...) Fix the bogus warning in CDC ACM which highlighted this problem (by showing a negative descriptor type). It uses the undesirable legacy err() for something that's not even an error; switch to use dev_dbg, and show descriptor types in hex notation to match the convention for such codes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: don't explicitly reenable root-hub status interruptsAlan Stern
This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 08:18:53 +0000