aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2010-01-20USB: isp1362: fix build failure on ARM systems via irq_flags cleanupLothar Wassmann
There was some left over #ifdef ARM logic that is outdated but no one really noticed. So instead of relying on this tricky logic, properly load and utilize the platform irq_flags resources. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: isp1362: better 64bit printf warning fixesLothar Wassmann
Some hosts that treat the return value of sizeof differently from unsigned long might still hit warnings. So use %zu for sizeof() values. This is a better version of the previous commit b0a9cf297e58721933. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: fix usbstorage for 2770:915d delivers no FATRyan May
Resolves kernel.org bug 14914. Remove entry for 2770:915d (usb digital camera with mass storage support) from unusual_devs.h. The fix triggered by the entry causes the file system on the camera to be completely inaccessible (no partition table, the device is not mountable). The patch works, but let me clarify a few things about it. All the patch does is remove the entry for this device from the drivers/usb/storage/unusual_devs.h, which is supposed to help with a problem with the device's reported size (I think). I'm pretty sure it was originally added for a reason, so I'm not sure removing it won't cause other problems to reappear. Also, I should note that this unusual_devs.h entry was present (and activating workarounds) in 2.6.29, but in that version everything works fine. Starting with 2.6.30, things no longer work. Signed-off-by: Ryan May <rmay31@gmail.com> Cc: Rohan Hart <rohan.hart17@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Fix level of isp1760 Reloading ptd error messageColin Tuckley
This error message is not actually an error, it's an information message. It is triggered when a transfer which ended in a NAQ is retried successfully by the hardware. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: FHCI: avoid NULL pointer dereferenceAlexander Beregalov
Assign fhci only if usb is not NULL. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Fix duplicate sysfs problem after device reset.Sarah Sharp
Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: add speed values for USB 3.0 and wireless controllersGreg Kroah-Hartman
These controllers say "unknown" for their speed in sysfs, which obviously isn't correct. Reported-by: Kurt Garloff <garloff@novell.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: add missing delay during remote wakeupAlan Stern
This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: EHCI & UHCI: fix race between root-hub suspend and port resumeAlan Stern
This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: EHCI: fix handling of unusual interrupt intervalsAlan Stern
This patch (as1320) fixes two problems related to interrupt-URB scheduling in ehci-hcd. URBs with an interval of 2 or 4 microframes aren't handled. For the time being, the patch reduces to interval to 1 uframe. URBs are constrained to have an interval no larger than 1024 frames by usb_submit_urb(). But some EHCI controllers allow use of a schedule as short as 256 frames; for these controllers we may have to decrease the interval to the actual schedule length. The second problem isn't very significant since few devices expose interrupt endpoints with an interval larger than 256 frames. But the first problem is critical; it will prevent the kernel from working with devices having interrupt intervals of 2 or 4 uframes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Tested-by: Glynn Farrow <farrowg@sg.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Don't use GFP_KERNEL while we cannot reset a storage deviceOliver Neukum
Memory allocations with GFP_KERNEL can cause IO to a storage device which can fail resulting in a need to reset the device. Therefore GFP_KERNEL cannot be safely used between usb_lock_device() and usb_unlock_device(). Replace by GFP_NOIO. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: fix bitmask merge errorAlan Stern
This patch adds a mask bit which was mistakenly omitted from the as1311 patch (usb-storage: add BAD_SENSE flag). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20usb: serial: fix memory leak in generic driverJohan Hovold
Fix a regression introduced by commit 715b1dc01fe44537e8fce9566e4bb48d6821d84b ("USB: usb_debug, usb_generic_serial: implement multi urb write"). URB transfer buffer was never freed when using multi-urb writes. Currently the only driver enabling multi-urb writes is usb_debug. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Greg KH <greg@kroah.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: serial: fix USB serial fix kfifo_len lockingStefani Seibold
This patch fix a possible race bug in drivers/usb/serial/generic with the new kfifo API. Please apply it to the 2.6.33-rc* tree. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: Fix a bug on appledisplay.c regarding signednesspancho horrillo
brightness status is reported by the Apple Cinema Displays as an 'unsigned char' (u8) value, but the code used 'char' instead. Note that he driver was developed on the PowerPC architecture, where the two types are synonymous, which is not always the case. Fixed that. Otherwise the driver will interpret brightness levels > 127 as negative, and fail to load. Signed-off-by: pancho horrillo <pancho@pancho.name> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: option: support hi speed for modem Haier CE100Donny Kurnia
I made this patch for usbserial driver to add the support for EVDO modem Haier CE100. The bugs report for this is here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/490068 This patch based on these post: http://blankblondtank.wordpress.com/2009/09/04/mengoptimalkan-koneksi-modem-haier-ce-100-cdma-di-linux/ http://tantos.web.id/blogs/how-to-internet-connection-using-cdma-evdo-modem-and-karmic-koala-ubuntu-9-10 I hope this patch can help other that have the Haier C100 modem, mostly in my country, Indonesia. Signed-off-by: Donny Kurnia <donnykurnia@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: audio gadget: free alsa devices when unloadingCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: audio gadget: fix wTotalLength calculationCliff Cai
The wTotalLength should contain the sum of the interface and unit descriptor sizes per the Audio Device Class specification 1.0. Reported-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23usb: otg: isp1301_omap: fix compile errorFelipe Balbi
commit 91c8a5a9985d5bf9c55f6f82f183f57b050b2a3a broke compilation of this driver after it introduced otg_init() as a static inline in <linux/usb/otg.h> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: workaround Blackfin FIFO anomaliesBryan Wu
Some of these workarounds are already in place, but labeled as affecting all BF52x parts. Since we have official anomaly numbers now, use those defines. And since writing to the FIFO has a similar hang issue as reading from the FIFO, implement the workaround there too when necessary. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Fix array index out of bounds issueMaulik Mankad
This patch fixes the below array index out of bounds issue. Buffer overflow, array index of 'aInfo' may be out of bounds. Array 'aInfo' of size 78 may use index value(s) 6..84 The data stored in 'aInfo' array exceeds the array size of 78. This patch increases the size of this array to hold the string correctly without any memory corruption. This issue was reported by Klockwork tool. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Fix null pointer dereference issueMaulik Mankad
This patch fixes the following NULL pointer dereference issue. Pointer 'request' returned from call to function 'next_request' at line 748 may be NULL and may be dereferenced at line 792. ============ Code Snippet ============ 748: request = next_request(musb_ep); 785: if (dma && (csr & MUSB_RXCSR_DMAENAB)) { csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_P_WZC_BITS | csr); 792: request->actual += musb_ep->dma->actual_len; Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: correct DMA address for txCliff Cai
Since a DMA transfer may need to be kicked off several times to complete, the DMA start must include the length that has already been transferred. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: gadget_ep0: avoid SetupEnd interruptSergei Shtylyov
Gadget stalling a zero-length SETUP request results in this error message: SetupEnd came in a wrong ep0stage idle In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero- length request. Add the missing '\n' to the error message itself as well... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabledSwaminathan S
Race condition exists between the cppi_interrupt handler and davinci_interrupt handler w.r.t completing a TX IO. Since DM646x has seperate DMA and USB endpoint interrupts cppi_interrupt handler needs to hold the lock while operating on the endpoint. Update over previous patch to avoid taking the lock if already taken. Tested on DM644x, DM355 and DM646x platforms. Signed-off-by: Swaminathan S <swami.iyer@ti.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: do not work if no gadget driver is loadedFelipe Balbi
On OTG and gadget-only configurations, we need a gadget driver in order to work properly, so avoid changing operation modes when there's no gadget driver loaded. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: gadget: set otg tranceiver to idle when registering gadgetArnaud Mandy
When registering gadget driver, the state of the transceiver must be set from undefined (no gadget) to b_idle. Module unload sets the transceiver state to undefined state. After the first load/unload pair, the reset irq will be lost. Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Populate the VBUS GPIO with the correct GPIO numberSwaminathan S
This fixes a null-pointer dereference bug. Signed-off-by: Swaminathan S <swami.iyer@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: fix compiling warning with min() macroCliff Cai
Current musb gadget dma code produces the warning: drivers/usb/musb/musb_gadget.c: In function 'txstate': drivers/usb/musb/musb_gadget.c:312: warning: comparison of distinct pointer types lacks a cast So switch to min_t(size_t, ...). Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: move musb_remove to __exitFelipe Balbi
probe() already was on __init, so moving remove() to __exit. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb_gadget: fix kernel oops in txstate()Sergei Shtylyov
Commit 7723de7e19b744144975a09c81777ec0f14ac5b3 (USB: musb_gadget: remove pointless loop) included uncalled for (and incorrect) optimization that might cause a kernel oops in txstate() -- undo it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h headerAndreas Mohr
This is a (almost) sort-only patch to sort FTDI device product ID definitions in new ftdi_sio_ids.h header. Advantage is that new device ID submissions will now have a specific (sorted) position - less future merge conflicts. Compile-tested, based on _current_ mainline git. Minor checkpatch.pl warnings were eliminated whereever it made sense, very minor text changes. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h headerAndreas Mohr
This is a strictly move-only patch to relocate all FTDI device product ID definitions to their own ftdi_sio_ids.h header (following the usual *_ids.h kernel tree convention, too), thus correcting the slightly too messy appearance (crucial driver defines were stuck somewhere in the decaying middle swamp of the huge existing header). Compile-tested, based on latest mainline git. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB core: fix recent kernel-doc warningsRandy Dunlap
Fix new kernel-doc warnings in usb core: Warning(drivers/usb/core/usb.c:79): No description found for parameter 'config' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'iface_num' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'alt_num' Warning(drivers/usb/core/hcd.c:1622): No description found for parameter 'udev' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: add device ID for Apple Cinema Display 23in 2007pancho horrillo
Hi! $ lsusb -v Bus 001 Device 008: ID 05ac:921c Apple, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x05ac Apple, Inc. idProduct 0x921c bcdDevice 1.15 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 92 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 16 Signed-off-by: pancho horrillo <pancho@pancho.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: fix section mismatch in early ehci dbgpJan Beulich
Commit 917778267fbe67703ab7d5c6f0b7a05d4c3df485 removed __init from ehci_wait_for_port(), but left it in place on ehci_reset_port(), which is being called from the former function. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: emi62: fix crash when trying to load EMI 6|2 firmwareClemens Ladisch
While converting emi62 to use request_firmware(), the driver was also changed to use the ihex helper functions. However, this broke the loading of the FPGA firmware because the code tries to access the addr field of the EOF record which works with a plain array that has an empty last record but not with the ihex helper functions where the end of the data is signaled with a NULL record pointer, resulting in: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<f80d248c>] emi62_load_firmware+0x33c/0x740 [emi62] This can be fixed by changing the loop condition to test the return value of ihex_next_binrec() directly (like in emi26.c). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: Der Mickster <retroeffective@gmail.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: serial: Extra device/vendor ID for mos7840 driverBlaise Gassend
Signed-off-by: Blaise Gassend <blaise.gasend_linux@m4x.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: Fix double-linking of drivers/usb/otg when ULPI is selectedBill Gatliff
This patch corrects a problem where drivers/usb/otg is linked twice if CONFIG_USB_ULPI is selected, resulting in a build error (symbol conflict). The files in that directory are properly linked already as part of CONFIG_USB, and need not be indicated specifically for CONFIG_USB_ULPI. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: gadget: Use ERR_PTR/IS_ERRJulia Lawall
Use ERR_PTR and IS_ERR rather than mixing integers and pointers. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *E; @@ * E < 0 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: fix bugs in usb_(de)authorize_deviceAlan Stern
This patch (as1315) fixes some bugs in the USB core authorization code: usb_deauthorize_device() should deallocate the device strings instead of leaking them, and it should invoke usb_destroy_configuration() (which does proper reference counting) instead of freeing the config information directly. usb_authorize_device() shouldn't change the device strings until it knows that the authorization will succeed, and it should autosuspend the device at the end (having autoresumed the device at the start). Because the device strings can be changed, the sysfs routines to display the strings must protect the string pointers by locking the device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Inaky Perez-Gonzalez <inaky@linux.intel.com> Acked-by: David Vrabel <david.vrabel@csr.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: rename usb_configure_deviceAlan Stern
This patch (as1314) renames usb_configure_device() and usb_configure_device_otg() in the hub driver. Neither name is appropriate because these routines enumerate devices, they don't configure them. That's handled by usb_choose_configuration() and usb_set_configuration(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23Fix usb_serial_probe() problem introduced by the recent kfifo changesStefani Seibold
The USB serial code was a new user of the kfifo API, and it was missed when porting things to the new kfifo API. Please make the write_fifo in place. Here is my patch to fix the regression and full ported version. Signed-off-by: Stefani Seibold <stefani@seibold.net> Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: rename kfifo_put... into kfifo_in... and kfifo_get... into kfifo_out...Stefani Seibold
rename kfifo_put... into kfifo_in... to prevent miss use of old non in kernel-tree drivers ditto for kfifo_get... -> kfifo_out... Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc annotations more readable. Add mini "howto porting to the new API" in kfifo.h Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: cleanup namespaceStefani Seibold
change name of __kfifo_* functions to kfifo_*, because the prefix __kfifo should be reserved for internal functions only. Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: move out spinlockStefani Seibold
Move the pointer to the spinlock out of struct kfifo. Most users in tree do not actually use a spinlock, so the few exceptions now have to call kfifo_{get,put}_locked, which takes an extra argument to a spinlock. Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: move struct kfifo in placeStefani Seibold
This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3: serial - fix bug introduced in mfd: twl: fix twl4030 rename for remaining driver, board files USB ehci: replace mach header with plat omap3: Allow EHCI to be built on OMAP3
2009-12-16USB ehci: replace mach header with platThomas Weber
Replace the mach/usb.h with plat/usb.h Cc: linux-usb-devel@lists.sourceforge.net Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-16isp1362-hcd: use bitmap_find_next_zero_areaAkinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 06:26:37 +0000