aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2008-03-10USB: fix ehci unlink regressionsDavid Brownell
The recent EHCI driver update to split the IAA watchdog timer out from the other timers made several things work better, but not everything; and it created a couple new issues in bugzilla. Ergo this patch: - Handle a should-be-rare SMP race between the watchdog firing and (very late) IAA interrupts; - Remove a shouldn't-have-been-added WARN_ON() test; - Guard against one observed OOPS; - If this watchdog fires during clean HC shutdown, it should act as a NOP instead of interfering with the shutdown sequence; - Guard against silicon errata hypothesized by some vendors: * IAA status latch broken, but IAAD cleared OK; * IAAD wasn't cleared when IAA status got reported; The WARN_ON is in bugzilla as 10168; the OOPS as 10078; these are both regressions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: new ftdi_sio device idMirko Bordignon
Here is a patch that adds support for the propox jtagcable II dongle (http://www.propox.com/products/t_117.html): their PID was missing, therefore we were not able to have the device recognized though it uses a standard FTDI chip. Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: fsl_usb2_udc: fix broken KconfigLi Yang
The patch fixes broken Kconfig caused by the name change of MPC834x option. It also makes fsl_usb2_udc selectable on new platforms like MPC837x. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: option: add novatel device idsDirk DeSchepper
This updates the option driver with a lot more novatel driver ids. From: Dirk DeSchepper <ddeschepper@nvtl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: cypress_m8: add UPS Powercom (0d9f:0002)Dmitry Shapin
Add support for UPS Powercom USB interface (0d9f:0002) in chip CY7C63723. In my case, this Powercom BNT800AP. Signed-off-by: Dmitry Shapin <shapin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: drivers/usb/storage/sddr55.c: fix uninitialized var warningsAndrew Morton
drivers/usb/storage/sddr55.c: In function 'sddr55_transport': drivers/usb/storage/sddr55.c:526: warning: 'deviceID' may be used uninitialized in this function drivers/usb/storage/sddr55.c:525: warning: 'manufacturerID' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10USB: fix usb-serial generic recursive lockPete Zaitcev
Nobody should be using the generic usb-serial for anything other than testing. Still, it's not a good thing that it's easy to lock up. There is a traceback from NMI oopser here: https://bugzilla.redhat.com/show_bug.cgi?id=431379 But in short, if a line discipline has a chance to echo anything, input can loop back a write method. So, don't call tty_flip_buffer_push from under a lock taken on write path. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: debugfs: fix sparse warnings Driver core: Fix cleanup when failing device_add(). driver core: Remove dpm_sysfs_remove() from error path of device_add() PM: fix new mutex-locking bug in the PM core PM: Do not acquire device semaphores upfront during suspend kobject: properly initialize ksets sysfs: CONFIG_SYSFS_DEPRECATED fix driver core: fix up Kconfig text for CONFIG_SYSFS_DEPRECATED
2008-03-04USB: ftdi_sio - really enable EM1010PCSven Andersen
Add EM1010PC to ftdi_sio.c Signed-off-by: Sven Andersen <s.andersen@cryonet.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: remove incorrect struct class_device from the printer gadgetTony Jones
This field does nothing, and should not be allowed to stick around incase someone gets any other ideas... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: pxa2xx_udc: fix misuse of clock enable/disable callsDmitry Baryshkov
Fix pxa2xx_udc to balance calls to clk_enable/clk_disable. [db: remove inline #ifdefs for IXP non-support of <linux/clk.h> calls] Signed-off-by: Dmitry Baryshkov dbaryshkov@gmail.com Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: ftdi_sio: Workaround for broken Matrix Orbital serial portKevin Vance
Workaround for the FT232RL-based, Matrix Orbital VK204-25-USB serial port added to the ftdi_sio driver. The device has an invalid endpoint descriptor, which must be modified before it can be used. Signed-off-by: Kevin Vance <kvance@kvance.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: Add support for AXESSTEL MV110H CDMA modemDaniel Kozák
Add entry for Axesstel MV110H CDMA modem (ID: 1726:1000) to option driver Signed-off-by: Daniel Kozák <kozzi11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04usb-storage: update earlier scatter-gather bug fixAlan Stern
This patch (as1037) makes a small update to the earlier as1035 patch. The minimum-length computation shouldn't be done in usb_stor_access_xfer_buf(), since that routine can be called multiple times for a single transfer. It should be done in usb_stor_set_xfer_buf() instead, which gets called only once. The way it is now isn't really _wrong_, but it isn't really _right_ either. Moving the statement will be an improvement. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: isp116x: fix enumeration on bootAnti Sullin
This patch removes the buffering of the status register. USB core behavior has changed a bit and this buffering was not refreshed at the right time. The core got buffered old value of HCRHPORT and it did not detect any devices on boot. Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Acked by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: ehci: handle large bulk URBs correctly (again)Misha Zhilin
USB: ehci: Fixes completion for multi-qtd URB the short read case When use of urb->status in the EHCI driver was reworked last August (commit 14c04c0f88f228fee1f412be91d6edcb935c78aa), a bug was inserted in the handling of early completion for bulk transactions that need more than one qTD (e.g. more than 20KB in one URB). This patch resolves that problem by ensuring that the early completion status is preserved until the URB is handed back to its submitter, instead of resetting it after each qTD. Signed-off-by: Misha Zhilin <misha@epiphan.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: spruce up the device blacklistAlan Stern
This patch (as1040) fixes up the blacklist of USB device quirks. A couple of lines are broken to comply with the 80-column rule, and entries are sorted into the proper numerical order. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: update Kconfig entry for USB_SUSPENDAlan Stern
This patch (as1039) updates the Kconfig entry for USB_SUSPEND. The out-of-date reference to "power/state" is fixed, autosuspend is mentioned, and the dependency on EXPERIMENTAL is removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04usb: Add support for the mos7820/7840-based B&B USB/RS485 converter to mos7840.cDavid Ludlow
Add support for the mos7820/7840-based B&B USOPTL4_2/USOPTL4_4 USB/RS485 converter to mos7840.c Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PM: Do not acquire device semaphores upfront during suspendRafael J. Wysocki
Remove the code that acquires all device semaphores from the suspend code path as it causes multiple problems to appear (most notably, http://bugzilla.kernel.org/show_bug.cgi?id=10030) and revert the change introduced by commit 4145ed6dc597a9bea5f6ae8c574653b2de10620f depending on the code being removed. Remove pm_sleep_lock()/pm_sleep_unlock() from device_add() to avoid the issue reported at http://bugzilla.kernel.org/show_bug.cgi?id=9874. It should fix the regreesions reported at: http://bugzilla.kernel.org/show_bug.cgi?id=9874 http://bugzilla.kernel.org/show_bug.cgi?id=10030 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-03docbook: fix usb source filesRandy Dunlap
Fix docbook problems in USB source files. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23Fix u132-hcd.c compile errorMirco Tischler
This fixes the following compile error caused by commit 3a2d5b700132f35401f1d9e22fe3c2cab02c2549 ("PM: Introduce PM_EVENT_HIBERNATE callback state") CC [M] drivers/usb/host/u132-hcd.o drivers/usb/host/u132-hcd.c: In function ‘u132_suspend’: drivers/usb/host/u132-hcd.c:3224: error: expected expression before ‘int’ drivers/usb/host/u132-hcd.c:3225: error: ‘ports’ undeclared (first use in this function) ... Signed-off-by: Mirco Tischler <mt-ml@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-21ehci-fsl: add PPC_MPC837x to default yAnton Vorontsov
This patch converts USB_EHCI_FSL config option into the verbose bool, so we'll able to select it for other freescale processors with built-in EHCI controller. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: POWERPC: ehci: fix ppc buildAnton Vorontsov
Currently, this setup: CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PPC_OF=y Will fail to build: CC drivers/usb/host/ehci-hcd.o drivers/usb/host/ehci-hcd.c:1018:2: error: #error "missing bus glue for ehci-hcd" make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1 ehci-hcd.c actually contains OF_PLATFORM_DRIVER glue, so error is bogus. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: usb-storage: don't access beyond the end of the sg bufferAlan Stern
This patch (as1035) fixes a bug in usb_stor_access_xfer_buf() (the bug was originally found by Boaz Harrosh): The routine must not attempt to write beyond the end of a scatter-gather list or beyond the number of bytes requested. It also fixes up the formatting of a few comments and similar whitespace issues. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: quirks and unusual_devs entry for Actions flash driveAlan Stern
This patch (as1033) adds a quirks entry and an unusual_devs entry for the Actions Semiconductor flash drive. This device has a 64-byte string descriptor, which it doesn't terminate with a 0-length packet. Oddly enough, the reporter's logs show that when the device was plugged in at boot time, it changes its behavior completely -- it uses a different product ID, product string descriptor, and bDeviceClass. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: usb-storage: unusual_devs entry for Oracom MP3 playerRobert Spitzenpfeil
This patch (as1034) was written by Leonid Petrov, reported by Robert Spitzenpfeil, and updated by me. It adds an unusual_devs entry with the IGNORE_RESIDUE flag for the Oracom MP3 player. Together with the change to the Get-Max-LUN routine in as1032, it makes the player usable. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: serial: move zte MF330 from sierra to optionKevin Lloyd
Move the Onda H600/ZTE MF33 device from the sierra driver to the option driver. The reason it was moved is because the sierra driver is starting to support more and more sierra proprietary features, so it makes more sense to keep sierra only devices in there. Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: add new vernier product id to ldusb.cStephen Ware
I have a new ldusb device to go into the device table. Jiri has merged the change for hiddev quirks already. From: Stephen Ware <stephen.ware@eqware.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: gadget: queue usb USB_CDC_GET_ENCAPSULATED_RESPONSE messageJan Altenberg
commit 0cf4f2de0a0f4100795f38ef894d4910678c74f8 introduced a bug, which prevents sending an USB_CDC_GET_ENCAPSULATED_RESPONSE message. This breaks the RNDIS initialization (especially / only Windoze machines dislike this behavior...). Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: Add another Novatel U727 ID to the device table for usbserialWarren Turkal
Signed-off-by: Warren Turkal <turkal@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: storage: Nikon D80 new FW still needs FixupKonstantin Kletschke
Add new BCD numbers for Nikon D80 Firmware revision v1.10 to the unusual_devs.h file. Signed-off-by: Konstantin Kletschke <konsti@ku-gbr.de> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: usb-storage: don't clear-halt when Get-Max-LUN stallsAlan Stern
This patch (as1032) removes the Clear-Halt calls in usb_stor_Bulk_max_lun(). Evidently some devices (such as the Oracom MP3 player) really don't like to receive these requests when their bulk endpoints aren't halted. The only reason for adding them originally was to get an ancient ZIP-100 drive to work. But since this device has only a single LUN, we don't need to send it a Get-Max-LUN request at all. Adding an unusual_devs entry for the ZIP-100 with the SINGLE_LUN flag set will cause this step to be skipped. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: option: Added vendor id for Dell 5720 broadband modemStefan Bader
this is a small patch to add support for a rebranded Novatel modem (see http://ubuntuforums.org/archive/index.php/t-608388.html for details). Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: option: Add Kyocera KPC680 idsDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: quirks for known quirky audio devicesOliver Neukum
RESET_RESUME entries for some sound devices that need it. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: fix previous sparse fix which was incorrectDavid Brownell
The previous fix for a "sparse" warning in ehci_urb_dequeue() was incorrect. After rescheduling interrupt transfers it returned the URB's completion status, not status for the dequeue operation itself. This patch resolves that issue, cleans up the code in the reschedule path, and shrinks the object code by a dozen bytes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: fix error handling in trancevibratorOliver Neukum
trancevibrator should not pretend success if it returns an error. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: g_printer, fix empty if statementAdrian Bunk
A bug every C programmer makes at some point in time... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Craig W. Nadler <craig@nadler.us> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: ehci-fsl: mpc834x config symbol is PPC_MPC834x, not MPC834xPeter Korsgaard
The config symbol for mpc834x processors is CONFIG_PPC_MPC834x, not CONFIG_MPC834x. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: fix usb open suspend race in cdc-acmOliver Neukum
this fixes a race between open and disconnect in the CDC ACM driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: usb: yet another Dell wireless CDMA/EVDO modemAndy Shevchenko
Add native support of the Dell wireless CDMA/EVDO modem. # modprobe usbserial vendor=0x413c product=0x8129 Following seesion lines describe modem itself at OK ati3 Manufacturer: NOVATEL WIRELESS INCORPORATED Model: EXPEDITE ET620 Revision: M6500C-BBIRD_TLS_MINI_DELL-Q40306.166 [Aug 25 2006 14:00:00] ESN: 0x5B39071D +GCAP: +CIS707-A, CIS-856, +MS, +ES, +DS, +FCLASS OK Signed-off-by: Andy Shevchenko <andy@smile.org.ua> Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: fix pm counter leak in usblpOliver Neukum
if you fail in open() you must decrement the pm counter again. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
2008-02-21USB: Sane memory allocation in option driverOliver Neukum
The option driver - violates DMA coherency rules - allocates ~16500 bytes in one chunk This patch splits out the buffers and uses __get_free_page() to avoid higher order allocations. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-By: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21USB: ftdi_sio.c add missing '|'Roel Kluin
add missing '|' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-14d_path: Make d_path() use a struct pathJan Blunck
d_path() is used on a <dentry,vfsmount> pair. Lets use a struct path to reflect this. [akpm@linux-foundation.org: fix build in mm/memory.c] Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08usb: net2280 can't have a function called show_registers()David Howells
net2280 can't have a function called show_registers() because this can produce a namespace clash with an arch function of the same name. All this driver's functions and variables should really be prefixed with "net2280_" to avoid such a problem in future. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits) PCI: make pci_bus a struct device PCI: fix codingstyle issues in include/linux/pci.h PCI: fix codingstyle issues in drivers/pci/pci.h PCI: PCIE ASPM support PCI: Fix fakephp deadlock PCI: modify SB700 SATA MSI quirk PCI: Run ACPI _OSC method on root bridges only PCI ACPI: AER driver should only register PCIe devices with _OSC PCI ACPI: Added a function to register _OSC with only PCIe devices. PCI: constify function pointer tables PCI: Convert drivers/pci/proc.c to use unlocked_ioctl pciehp: block new requests from the device before power off pciehp: workaround against Bad DLLP during power off pciehp: wait for 1000ms before LED operation after power off PCI: Remove pci_enable_device_bars() from documentation PCI: Remove pci_enable_device_bars() PCI: Remove users of pci_enable_device_bars() PCI: Add pci_enable_device_{io,mem} intefaces PCI: avoid save the same type of cap multiple times PCI: correctly initialize a structure for pcie_save_pcix_state() ...
2008-02-01PCI: use dev_printk in quirk messagesbjorn.helgaas@hp.com
Convert quirk printks to dev_printk(). I made the MSI disable messages a little more consistent: - always use "disabled", not "deactivated" - specify "device MSI disabled" or "subordinate MSI disabled" when disabling MSI for only a specific device or subordinate bus Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>