aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2006-08-26[PATCH] unusual_devs update for UCR-61S2BAlan Stern
The existing unusual_devs entry for the UCR-61S2B appears to have too wide a revision range. It matches at least one device that doesn't respond to the initialization sequence. Perhaps the sequence needs to be updated, or perhaps something else can be done. For now, this patch (as764) restricts the range to include only the revision mentioned in the original comment. This resolves (for now!) Bugzilla entry #6950. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-26[PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cableTomasz Kazmierczak
This patch removes support for a clone of Nokia DKU-5 cable made by Ours Technology Inc, as it turned out that the cable does not use the pl2303 chip, but OTI-6858 chip which is not compatible with the pl2303. Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-26[PATCH] USB: fix bug in cypress_cy7c63.c driverGreg Kroah-Hartman
This was pointed out by Adrian Bunk <bunk@stusta.de>, as found by the Coverity Checker. Cc: Adrian Bunk <bunk@stusta.de> Cc: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: usbtest.c: unsigned retval makes ctrl_out return 0 in case of errorOrjan Friberg
In my quest to try and figure out why test 14 (control write) doesn't work with my EZ-USB board, I noticed that sometimes testusb reported no error even though the kernel log complained "byte 0 is 0 not 2" etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: ftdi_sio driver - new PIDsJonathan Davies
Signed-off-by: Jonathan Davies <jjd27@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: Additional PID for SHARP W-ZERO3Norihiko Tomiyama
I write a patch for ipaq.c. Would you like to add upstream tree ? This patch enables a support of "SHARP W-ZERO3(WS004SH)" and "SHARP W-ZERO3[es](WS007SH)". From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: appletouch: fix atp_disconnectJohannes Berg
appletouch uses urb->transfer_dma after having freed the urb, this shows up only if the system is compiled with slab debugging. This patch fixes it by reordering the free calls. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: removed a unbalanced #endif from ohci-au1xxx.cYoichi Yuasa
This patch has removed a unbalanced #endif from ohci-au1xxx.c . Please apply before 2.6.18 release. Error message was: In file included from drivers/usb/host/ohci-hcd.c:909: drivers/usb/host/ohci-au1xxx.c:113:2: #endif without #if Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: unusual_devs entry for A-VOX WSX-300ER MP3 playerDavid Kuehling
This patch (as763) adds an unusual_devs entry for the A-VOX WSX-300ER MP3 player. From: David Kuehling <dvdkhlng@gmx.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-04Input: ati_remote - use msec instead of jiffiesDmitry Torokhov
By using milliseconds instead of jiffies to calculate acceleration factor we make the code immune to changes in HZ. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-04Input: ati_remote - add missing input_sync()Dmitry Torokhov
When emulating button toggle drivers need to send input_sync() between 'down' and 'up' events, otherwise some users might miss keypress because device's state is only considered finalized after EV_SYN/SYN_REPORT is received. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-04Input: ati_remote - relax permissions sysfs module parametersDmitry Torokhov
Allow changing debug and channel_mask parameters on the fly. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-04Input: ati_remote - make filter time a module parameterEdwin Huffstutler
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-04Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 ↵Dmitry Torokhov
into for-linus
2006-08-02Revert "[PATCH] USB: move usb_device_class class devices to be real devices"Greg Kroah-Hartman
This reverts c182274ffe1277f4e7c564719a696a37cacf74ea commit because it required a newer version of udev to work properly than what is currently documented in Documentation/Changes. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02Revert "[PATCH] USB: convert usb class devices to real devices"Greg Kroah-Hartman
This reverts bd00949647ddcea47ce4ea8bb2cfcfc98ebf9f2a commit because it required a newer version of udev to work properly than what is currently documented in Documentation/Changes. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: UHCI: Don't test the Short Packet Detect bitAlan Stern
Apparently some UHCI controllers change the value of the Short Packet Detect (SPD) bit in the TD status word -- presumably when they receive a short packet. This patch (as759) changes uhci-hcd to avoid assuming that the bit is unchanged; in fact, the driver no longer looks at SPD at all. This fixes the second problem reported in Bugzilla #6752. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: unusual_devs entry for Nokia 3250Alan Stern
Here is another unusual_devs entry (as760) for another Nokia device, this time the 3250. From: Mario Rettig <mariorettig@web.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: dummy-hcd: disable interrupts during req->completeAlan Stern
This patch (as756) fixes a bug in dummy-hcd found by the lockdep checker. In one of the code paths, the driver did not disable interrupts before calling a request completion routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: fix the USB_GADGET_DUMMY_HCD dependenciesAdrian Bunk
If USB=m, USB_GADGET=y, the option USB_GADGET_DUMMY_HCD mustn't be offered since selecting it results in a compile error. This patch fixes kernel Bugzilla #6534 reported by Toralf Förster. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: ati_remote.c: autorepeat fixMarko Macek
When HZ is set to 250 (new default) or 100, the time span during which repeated events from the device are ignored could be too small due to ms->jiffies rounding. This causes the auto repeat to kick in early making it impossible for the user to generate individual press/release events. Increate the timeout to compensate. Signed-off-by: Marko Macek <Marko.Macek@gmx.net> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Patch for rtl8150 to fix unplug problemsPeter Chubb
The RTL8150 driver currently crashes the kernel if the USB lead is unplugged while the device is active. The attached patch adds error handling to tell the network layer that the device has gone away when the device is unplugged. With this patch, the device can be plugged and unplugged to one's hearts' content, without crashing anything. Oh, I've also added rudimentary suspend and resume methods. Signed-off-by: Peter Chubb <peter@gelato.unsw.edu.au> Acked-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: cypress driver comment updatesOliver Bock
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: unusual_devs device removalPhil Dibowitz
This entry has been a mystery for some time. I had sent this patch as an RFC a while ago, and now we've had two reports of this not being needed, so I'm removing it. In the event there are reports of breakage, we should revert this patch, but add a US_FL_NEED_OVERRIDE flag. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02usb-storage: Add US_FL_IGNORE_DEVICE flag; ignore ZyXEL G220FDaniel Drake
This patch adds a new unusual_devs flag for when usb-storage needs to ignore a device that it would otherwise claim. We need to ignore the ZyXEL G220F as it is a virtual CDROM drive which includes the windows driver for this USB-WLAN adapter. After the windows driver is installed on a windows system, it converts it into a WLAN adapter (by ejecting the virtual disc). The virtual CDROM is of no interest to Linux users. The zd1211rw driver will automatically perform the eject operation, we just need to ensure that usb-storage does not claim the device. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: New USB ID for Belkin Serial AdapterKim Oldfield
Can you add the USB IDs for the Belkin USB Serial adapter (P/N F5U257) to the pl2303 driver in the Linux Kernel? Are you the appropriate person to approach for this? I recently purchased a Belkin USB Serial adapter (P/N F5U257) and found that it didn't work. After a bit of experimentation I found that it works with the pl2303 driver once the ID has been added. See attached patch to fix this. Also attached is the output from lsusb -v just in case you require any information from there. From: Kim Oldfield <luv@oldfield.wattle.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Additional PID for the ftdi_sio driverDave Platt
Here's a short patch which adds one PID to the set of devices supported by the ftdi_sio driver. The device in question is a DLP module used as part of a ham radio USB-to-packet adapter. From: Dave Platt <dplatt@radagast.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: adding support for SHARP WS003SH to ipaq.cNorihiko Tomiyama
This small patch enables a support of "SHARP WS003SH". "SHARP WS003SH" (usullary called "W-ZERO3") is most polular All-in-one handheld CellPhone-plus-WindowsMobile5.0 in Japan. "SHARP WS003SH" has two modes, "Modem" and "ActiveSync". But, "ActiveSync" mode uses NDIS connection. Therefore, ipaq.c can only support "Modem" mode. http://www.sharp.co.jp/ws/ (Japanese Site) http://greggman.com/edit/editheadlines/2005-12-24.htm From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Fix Freescale high-speed USB host dependencyLi Yang
The high-speed USB SOC only exists on MPC834x family not MPC83xx family. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Removed 3-port device handler from Option driverMatthias Urlichs
Dead code. From: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Drop Sierra Wireless MC8755 from the Option driverMatthias Urlichs
This device is now supported by sierra.c. From: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Let option driver handle Anydata CDMA modems. Remove anydata driver.Matthias Urlichs
Signed-off-by: Jon K Hellan <hellan@acm.org> Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Option driver: Short driver names were identicalMatthias Urlichs
The short driver names were not unique, which prevented the driver from actually loading. Also, one of the ioctl pointers was missing. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Option driver: removed change history and linux/version.h includeMatthias Urlichs
Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: AT91 OHCI updates, mostly power managementDavid Brownell
OHCI updates for AT91 series processors: - Get ready for at91sam926x processors (ARMv5tej not ARMv4t) - Suspend/resume support now behaves properly - In "standby" mode, OHCI can be a source of system wakeup events (remote wakeup, device connect/disconnect, etc) And minor cleanups. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: AT91 UDC updates, mostly power managementDavid Brownell
UDC updates for AT91 series processors: - Get ready for at91sam926x processors (ARMv5tej not ARMv4t) - Suspend/resume support now behaves properly - In "standby" mode, UDC can be a source of system wakeup events (host resume, device connect/disconnect, etc) - Fix IRQ storming issues, seemingly related to clock disabling changes that went in a while back And minor cleanups, especially whitespace. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-19Input: hiddev - use standard list implementationDmitry Torokhov
Fixes Coverity #id 303 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-15Input: HID - fix potential out-of-bound array accessDmitry Torokhov
Fixes Coverity #id 978 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-12[PATCH] USB: move usb-serial.h to include/linux/usb/Greg Kroah-Hartman
USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Anydata: Fixes wrong URB callback.Luiz Fernando N. Capitulino
Anydata is using usb_serial_generic_write_bulk_callback() for its read URB, but it should use usb_serial_generic_read_bulk_callback() instead (it's a read URB, isn't it?). Reported by Jon K Hellan <hellan@acm.org>. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: gadget section fixupsDavid Brownell
Recent section changes broke gadget builds on some platforms. This patch is the best fix that's available until better section markings exist: - There's a lot of cleanup code that gets used in both init and exit paths; stop marking it as "__exit". (Best fix for this would be an "__init_or_exit" section marking, putting the cleanup in __init when __exit sections get discarded else in __exit.) - Stop marking the use-once probe routines as "__init" since references to those routines are not allowed from driver structures. They're now marked "__devinit", which in practice is a net lose. (Best fix for this is likely to separate such use-once probe routines from the driver structure ... but in general, all busses that aren't hotpluggable will be forced to waste memory for all probe-only code.) In general these broken section rules waste an average of two to four kBytes per driver of code bloat ... because none of the relevant code can ever be reused after module initialization. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: another unusual devicePhil Dibowitz
Please add the attached device to unusual_devs.h. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Add one VID/PID to ftdi_sioColin Leroy
This patch adds the Testo USB interface to the list of devices recognized by the ftdi_sio module. This device is based on a FT232BL chip, and is used as an interface to get data from digital sensors (thermometer, etc). See http://www.testo.com/ Signed-off-by: Colin Leroy <colin@colino.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: unusual_devs entry for Sony DSC-H5Lars Jacob
This patch (as749) extends the unusual_devs entry for the Sony DSC-T1 and T5 to cover the H5 as well. From: Lars Jacob <jacob.lars@googlemail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: unusual_devs entry for Nokia E61Alan Stern
This patch (as748) adds an unusual_devs entry for the Nokia E61 mobile phone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: unusual_devs entry for Nokia N91Alan Stern
This patch (as745) adds an unusual_devs entry for the Nokia N91, just like the entry for the N80 added a couple of weeks ago. Apparently Nokia isn't using very good firmware these days... Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driverDan Streetman
I just got a "ZyXEL Prestige USB Adapter" that is actually RTL8150 adapter. Here is the relevant /proc/bus/usb/devices output (after adding the vendor/product IDs to the driver): T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=119 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0586 ProdID=401a Rev= 1.00 S: Manufacturer=ZyXEL S: Product=Prestige USB Adapter S: SerialNumber=1027 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=120mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=rtl8150 E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms This patch adds the ZyXEL vendor ID to the rtl8150.c driver. The device has absolutely no identifying marks on the outside for model type, just a serial number, and I can't find anything on ZyXEL's website, so I called the product ID PRODUCT_ID_PRESTIGE to match the product string. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: <petkan@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Option driver: new product IDMatthias Urlichs
Yet another "same name, somewhat different hardware" product. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS AdapterNavaho Gunleg
This patch is to get the WiseGroup.,Ltd SmartJoy Dual Plus PS2-to-USB Adapter [0x6677:0x8802] correctly detected. It sets the NOGET and MULTI_INPUT quirks to make 2 joystick nodes appear in stead of only one. (As of yet, only confirmed working by myself.) Signed-off-by: Navaho Gunleg <navahogunleg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: ipw.c driver fixBart Oldeman
The below patch fixes the ipw module in kernel 2.6.17 for me; without this change it simply does not work at all (all but the first writes are refused because write_urb_busy is always 1). This problem was there in 2.6.15 as well, but at that point I used the (updated) ipw.c, version 0.4, from http://www.neology.co.za/products/opensource/ipwireless/ which no longer compiles with 2.6.17. It can be made to after a few changes but obviously it's easier if the built-in ipw driver works instead of having to download one from the neology site. From: Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 20:13:39 +0000