aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2007-03-10Revert "USB: pxa2xx_udc: fix hardcoded irq number"Linus Torvalds
This reverts commit d2487cb4257dafb686f682285854fe7f02ca29d8. Russell King points out that it's obviously bogus, and I have to agree. Not only does "irq" not even exist in that scope, but we obviously need to free the irq that we actually requested, and that's IRQ_USB. Reported-by: Russell King <rmk@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net>, Cc: Milan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-09USB Elan FTDI: check for workqueue creationCyrill Gorcunov
Avoid NULL pointer usage if workqueue creation failed. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: fix spinlock recursion in cdc-acm.cOliver Neukum
this fixes the spinlock recursion issue. The older fix was incomplete. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: fix Unaligned access in EHCI driverMax Dmitrichenko
I get following warnings on spar64: Kernel unaligned access at TPC[1000c9e4] ehci_hub_control+0x54c/0x68c [ehci_hcd] Despite of the comment in the patched code, the type cast used there does make unaligned access. The fix was made as it's done in ohci-hub.c. Signed-off-by: Max Dmitrichenko <dmitrmax@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: Product ID for FT232RL in ftdi_sioGard Spreemann
Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch generates a warning during compilation because get_ftdi_divisor doesn't explicitly handle the FT232RL with this patch, so I guess you don't want to use it in its current state. It is all I could come up with with the knowledge I have of the drivers at the moment, though, and I hope you can have some use for it at least. It works fine with my DLP-TILT with an FT232RL. From: Gard Spreemann <spreeman@stud.ntnu.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USBNET: DM9501: Add Corega FEther USB-TXC support.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: ipaq.c: Additional devicesAndre Spahlinger
Additional devices Signed-off-by: Andre Spahlinger <uenz@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: further fix for usb-serialOliver Neukum
this is a fix for the outstanding usb-serial issues. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: fix usb-serial device naming bugOliver Neukum
Am Montag, 26. Februar 2007 15:16 schrieb Craig Schlenter: > Hi Greg > > 34ef50e5b1f96c2d8c0f3d28b7d407743806256c is definitely > the source of the problem. Reverting that makes the > ftdi port show up as ttyUSB0 again for me and it > can actually be opened. This patch should fix the issue. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Craig Schlenter <craig@codefountain.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: RTS/DTR signal patch for airprime driverMartin Schiller
I encountered some problems with the airprime driver in use with a Novatel Merlin XU870: Closing an open Connection to e.g. /dev/ttyUSB0 doesn't reset the RTS/DTR lines of the Modem. Consequently, when I use minicom to establish a connection by "ATD*99#" the modem doesn't hang up even if i exit minicom and so I cannot reuse the modem unless I remove it and plug it in again. With the attached patch, the RTS/DTR lines are resetted on a close. The code was mainly taken from the option.c driver.
2007-03-09USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the ↵Jim Radford
latency_timer Convert all the port specific code in attach / shutdown to use the new port_probe / port_register callbacks from device_register / device_unregister allowing adding the sysfs attributes to be added at the correct time and to the serial port device itself, instead of to the unadorned usb device, avoiding a NULL dereference. Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09usb-serial: fix shutdown / device_unregister orderJim Radford
Ensure that the ->port_remove() callbacks get called before the ->shutdown() callback which makeing the order symmetric with ->attach() being called before ->port_probe(). Signed-off-by: Jim Radford <radford@blackbean.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: add Additional PIDs in ftdi_sioThomas Schleusener
I've developed some devices with FTDI chips (FT232xx). FTDI was so kind to give some own PID's which I can use together with their VID. Some of the devices are already very popular here and I have customers from universities, institutes ..... I use the FTDI VID 0x0403. My PID's are: 0xff38 - IBS US485 (USB<-->RS422/485 interface) 0xff39 - IBS PIC-Programmer 0xff3a - IBS Card reader for PCMCIA SRAM-cards 0xff3b - IBS PK1 - Particel counter 0xff3c - IBS RS232 - Monitor 0xff3d - APP 70 (dust monitoring system) 0xff3e - IBS PEDO-Modem (RF modem 868.35 MHz) 0xff3f - future device The company is "IBS Ing.-Buero Schleusener". From: Thomas Schleusener <thomas@be-schl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: add QL355P power supply ids to fdti_sioMichael Olberg
2007-03-09USB: New device IDs for cp2101 driverJon K Hellan
Here are two new device IDs for the cp2101 driver. The diff is with linus's tree as of this evending. From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: kill dead code from hub.cOliver Neukum
this kills residual obsoletet code from hub.c Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: ratelimit debounce error messagesOliver Neukum
flaky hardware can cause a lot of debounce failed messages. To limit the performance impact, a ratelimit should be used. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: pxa2xx_udc: fix hardcoded irq numberMilan Svoboda
This patch changes last use of hardcoded number of irq to use platfrom_get_irq. Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09UHCI: fix port resume problemAlan Stern
This patch (as863) fixes a problem encountered sometimes when resuming a port on a UHCI controller. The hardware may turn off the Resume-Detect bit before turning off the Suspend bit, leading usbcore to think that the port is still suspended and the resume has failed. The patch makes uhci_finish_suspend() wait until both bits are safely off. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: set the correct interval for interrupt URBsAlan Stern
This patch (as862) fixes a couple of bugs in the way usbcore handles intervals for interrupt URBs. usb_interrupt_msg (and usb_bulk_msg for backward compatibility) don't set the interval correctly for high-speed devices. proc_do_submiturb() doesn't set it correctly when a bulk URB is submitted to an interrupt endpoint. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: goku_udc: Remove crude cache coherency codeRalf Baechle
This is deep architecture specific magic and does should not to exist in a driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB storage: Nokia 6288 unusual_devs entryAndrew Nayenko
This patch adds an usual_devs entry for the Nokia 6288. Originally from Andrew with a re-diff by Phil. From: Andrew Nayenko <relan@bk.ru> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB storage: Removed duplicate supertop unusual_dev entryPhil Dibowitz
This patch removes the duplicate supertop entries that made it into the .21 rc kernels. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09USB: at91_udc, fix more modpost bogosity (rename driver struct)David Brownell
Rename the driver struct used with at91_udc to prevent yet another bogus warning from "modpost". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-06Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: HID blacklisting of all Code Mercenaries IOWarrior devices
2007-03-05[PATCH] usb-storage: do not rebuild when kernel version changesSam Ravnborg
Replacing use of UTS_RELEASE with utsname()->release avoids that the usb-storage driver is recompiled each time the kernel version changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-02HID blacklisting of all Code Mercenaries IOWarrior devicesRobert Marquardt
Put all Code Mercenaries (VID 0x07c0) IOWarriors (PIDs 0x1500 to 0x15ff) on the HID blacklist. The range of PIDs has been reserved for IOWarriors. Only 5 PIDs are really used yet. Signed-off-by: Robert Marquardt <marquardt@codemercs.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-03-01HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle buttonJiri Kosina
Dongle shipped with Logitech DiNovo Edge (0x046d/0xc714) behaves in a weird non-standard way - it contains multiple reports with the same usage, which results in remapping of GenericDesktop.X and GenericDesktop.Y usages to GenericDesktop.Z and GenericDesktop.RX respectively, thus rendering the touchwheel unusable. The commit 35068976916fdef82d6e69ef1f8c9a1c47732759 solved this in a way that it didn't remap certain usages. This however breaks (at least) middle button of Logic3 / SpectraVideo (0x1267/0x0210), which in contrary requires the remapping. To make both of the harware work, allow remapping of these usages again, and introduce a quirk for Logitech DiNovo Edge "touchwheel" instead - we disable remapping for key, abs and rel events only for this hardware. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-03-01HID: fix broken Logitech S510 keyboard report descriptor; make extra keys workJiri Kosina
This patch makes extra keys (F1-F12 in special mode, zooming, rotate, shuffle) on Logitech S510 keyboard work. Logitech S510 keyboard sends in report no. 3 keys which are far above the logical maximum described in descriptor for given report. This patch introduces a HID quirk for this wireless USB receiver/keyboard in order to fix the report descriptor before it's being parsed - the logical maximum and the number of usages is bumped up to 0x104d). The values are in the "Reserved" area of consumer HUT, so HID_MAX_USAGE had to be changed too. In addition to proper extracting of the values from report descriptor, proper HID-input mapping is introduced for them. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-03-01USB HID: use CONFIG_HID_DEBUG for outputting report descriptorJiri Kosina
Report descriptor should be output when CONFIG_HID_DEBUG is defined. This also mitigates the need for DEBUG and DEBUG_DATA defines, so let's remove them. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-03-01USB HID: Fix USB vendor and product IDs endianness for USB HID devicesJulien BLACHE
The USB vendor and product IDs are not byteswapped appropriately, and thus come out in the wrong endianness when fetched through the evdev using ioctl() on big endian platforms. Signed-off-by: Julien BLACHE <jb@jblache.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-23USB: export autosuspend delay in sysfsAlan Stern
This patch (as861) adds sysfs attributes to expose the autosuspend delay value for each USB device. If the user changes the delay from 0 (no autosuspend) to a positive value, an autosuspend is attempted. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: make autosuspend delay a module parameterAlan Stern
This patch (as859) makes the default USB autosuspend delay a module parameter of usbcore. By setting the delay value at boot time, users will be able to prevent the system from autosuspending devices which for some reason can't handle it. The patch also stores the autosuspend delay as a per-device value. A later patch will allow the user to change the value, tailoring the delay for each individual device. A delay value of 0 will prevent autosuspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: minor cleanups for sysfs.cAlan Stern
This patch (as858) makes some minor cleanups to sysfs.c in usbcore. Unnecessary tests are removed and a few temp variables are added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: add a blacklist for devices that can't handle some things we throw at them.Oliver Neukum
This adds a blacklist to the USB core to handle some autosuspend and string issues that devices have. Originally written by Oliver, but hacked up a lot by Greg. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: refactor usb device matching and create usb_device_matchGreg Kroah-Hartman
This is needed for the quirk match code. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: Wacom driver updatesPing Cheng
Updated Intuos and Graphire irq calls Report pad device ID Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23gadgetfs: Fixed bug in ep_aio_read_retry.Sarah Bailey
I don't think the current code works with multiple iovecs. The original would just copy the first part of priv->buf over and over into multiple iovecs. Signed-off-by: Sarah Bailey <saharabeara@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: Use USB defines in usbmouse.c and usbkbd.cMichael Opdenacker
The below patch proposes to use USB defines (defined in linux/hid.h) instead of just plain numbers in the USB_INTERFACE_INFO statements. Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: ftdi_sio: Adding VID and PID for TellstickMicke Prag
I would like to add the VID and PID for Telldus Technologies Homeautomation usb-dongle to the ftdi_sio driver. From: Micke Prag <micke.prag@telldus.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23UHCI: Eliminate asynchronous skeleton Queue HeadersAlan Stern
This patch (as856) attempts to improve the performance of uhci-hcd by removing the asynchronous skeleton Queue Headers. They don't contain any useful information but the controller has to read through them at least once every millisecond, incurring a non-zero DMA overhead. Now all the asynchronous queues are combined, along with the period-1 interrupt queue, into a single list with a single skeleton QH. The start of the low-speed control, full-speed control, and bulk sublists is determined by linear search. Since there should rarely be more than a couple of QHs in the list, the searches should incur a much smaller total load than keeping the skeleton QHs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23UHCI: Add macros for computing DMA valuesAlan Stern
This patch (as855) adds some convenience macros to uhci-hcd, to help simplify the code for computing hardware DMA pointers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: Davicom DM9601 usbnet driverPeter Korsgaard
This patch adds a driver for the Davicom DM9601 USB 1.1 10/100Mbps ethernet adaptor using the usbnet framework. See http://www.davicom.com.tw/eng/products/dm9601.htm for details. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: asix.c - Add JVC-PRX1 idsDavid Hollis
Add device IDs for the JVC-PRX1 port replicator. Additionally cleans up the tabs on a few of other IDs in the list. Reported by: Reuben Thomas <rrt@sc3d.org> Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23usbmon: Remove erroneous __exitPete Zaitcev
mon_bin_exit() and mon_text_exit() are called from __init code, so don't mark them as __exit. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: add driver for iowarrior devices.Greg Kroah-Hartman
The ioctl is commented out for now, until we verify some userspace application issues. Cc: Christian Lucht <lucht@codemercs.com> Cc: Robert Marquardt <marquardt@codemercs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: option: add a bunch of new device idsGreg Kroah-Hartman
This adds all of the known Option device ids to the driver. Many thanks to some Option engineers for getting me this list. Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-23USB: option: remove duplicate device id tableGreg Kroah-Hartman
There is no need to have two tables with the same device ids in it. Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-20backlight: Separate backlight properties from backlight ops pointersRichard Purdie
Per device data such as brightness belongs to the indivdual device and should therefore be separate from the the backlight operation function pointers. This patch splits the two types of data and allows simplifcation of some code. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20backlight: Fix external uses of backlight internal semaphoreRichard Purdie
backlight_device->sem has a very specific use as documented in the header file. The external users of this are using it for a different reason, to serialise access to the update_status() method. backlight users were supposed to implement their own internal serialisation of update_status() if needed but everyone is doing things differently and incorrectly. Therefore add a global mutex to take care of serialisation for everyone, once and for all. Locking for get_brightness remains optional since most users don't need it. Also update the lcd class in a similar way. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>