aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2007-04-27usb-net/pegasus: simplify carrier detectionDan Williams
Simplify pegasus carrier detection; rely only on the periodic MII polling. Reverts pieces of c43c49bd61fdb9bb085ddafcaadb17d06f95ec43. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27USB: update gadget files for fsl_usb2_udc driverLi Yang
Update gadget_chip.c, ether.c for newly added Freescale Highspeed USB device driver. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add Freescale high-speed USB SOC device controller driverLi Yang
Freescale high-speed USB SOC can be found on some Freescale processors among different architectures. It supports both host and device functions. This driver adds its device support for Linux USB Gadget layer. It is tested on MPC8349 and MPC8313, but should work on other platforms with minor tweaks. The driver passed USBCV 1.3 compliance tests. Note that this driver doesn't yet include OTG support. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jiang Bo <tanya.jiang@freescale.com> Signed-off-by: Bruce Schmid <duck@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: quirk for broken suspend of IT8152F/GRaphael Assenat
Here's a patch which adds my device to the list. This patch enables the broken suspend quirk for the PCI OHCI controller present in the IT8152F/G RISC-to-PCI Companion Chip. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: iowarrior.c: timeouts too small in usb_control_msg callsEberhard Fahle
The driver uses usb_control_msg() for exchanging data with the device. When the driver lived freeley _outside_ the kernel tree (pre 2.6.21) the timeouts for these calls where set to 5*HZ for reading, 1HZ for writing. (These timeouts seemed to work fine for all users of the driver, at least nobody complained in the last 2 years. The current code (2.6.21-rc5) removed the 'HZ' from the timeouts and left the driver with 5 jiffies for reading and 1 jiffy for writing. My new machine is fast, but not that fast. The patch also removes a useless debug statement, which was left over from testing a broken firmware version From: Eberhard Fahle <e.fahle@wayoda.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: dell device id for option.cHans Engelen
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: Remove Huawei unusual_devs entryPhil Dibowitz
Per the Rui Santos and the hardware manufacturers, this actually inhibits useful parts of the hardware. The correct way to use this hardware is with the software at http://www.kanoistika.sk/bobovsky/archiv/umts/ and the manufacturers are also planning on including Linux drivers/material in future revisions. CC: Rui Santos <rsantos@grupopie.com> CC: <johann.wilhelm@student.tugraz.at> CC: <zihan@huawei.com> CC: <wanganyu1983@huawei.com> CC: <dingjianjian@huawei.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: CP2101 New Device IDsCraig Shelley
Two new device IDs for CP2101 driver. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add picdem device to ldusbJoey Goncalves
Hi Greg: I have found that /drivers/usb/misc/ldusb.c works with the "PICDEM Full Speed USB" http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en021940 Signed-off-by: Joey S Goncalves <jgoncalves@peragrin.com> Cc: Michael Hund <MHund@LD-Didactic.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbfs micro optimitationOliver Neukum
the memory barrier is needed only with smp. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: remove ancient/broken CRIS hcdDavid Brownell
Remove the old crisv10 HCD ... it can't have built for some time, doesn't even have a Kconfig entry, was the last driver not to have been converted to the "hcd" framework, and considering the usbcore changes since its last patch was merged, has just got to buggy as all get-out. I'm told Axis has a new driver, and will be submitting it soon. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usb ethernet gadget, workaround network stack API glitchErik Hovland
Another workaround for the glitch in the network layer, whereby one call ignores the (otherwise kernel-wide) convention that free() calls should not oops when passed nulls. This code already handles that API glitch in most other paths. From: Erik Hovland <erik@hovland.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add "busnum" attribute for USB devicesAlan Stern
This patch (as903) adds a "busnum" sysfs attribute for USB devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cxacru: ADSL state managementSimon Arlott
The device has commands to start/stop the ADSL function, so this adds a sysfs attribute to allow it to be started/stopped/restarted. It also stops polling the device for status when the ADSL function is disabled. There are no problems with sending multiple start or stop commands, even with a fast loop of them the device still works. There is no need to protect the restart process from further user actions while it's waiting for 1.5s. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbatm: Detect usb device shutdown and ignore failed urbsSimon Arlott
Detect usb device shutdown and ignore failed urbs. This happens when the driver is unloaded or the device is unplugged. I'm not sure what other urb statuses should be ignored, and the warning message doesn't need to be shown when the module is unloaded or the device is removed. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: Remove duplicate define of OHCI_QUIRK_ZFMICROS.Caglar Onur
Remove duplicate define of OHCI_QUIRK_ZFMICRO from ftdi-elan.c, its already defined in drivers/ush/host/ohci.c Signed-off-by: "S.Caglar Onur" <caglar@pardus.org.tr> Cc: <tony.olech@elandigitalsystems.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: BandRich BandLuxe HSDPA Data Card DriverLeon Leong
Add the detection for the BandRich BandLuxe C100/C100S/C120 HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: Leon Leong <upleong@bandrich.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB gadget rndis: fix struct rndis_packet_msg_type unaligned bugWu, Bryan
skb_push function may return a pointer which is not aligned as required by struct rndis_packet_msg_type. Using attribute trick to fix this bug. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB Elan FTDI: check for driver registration statusCyrill Gorcunov
Add checking of driver registration status and release allocated resources if it failed. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: "Luiz Fernando N. Capitulino" <lcapitulino@mandriva.com.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: sierra: add more checks on shutdownGreg Kroah-Hartman
This should help with any potential NULL pointer usages as reported by a few users. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add an ohci board-specific quirkDavid Brownell
Use the new ohci-pci quirk infrastructure to address the problem it was created to address: a quirk specific to the Portege 4000, in buzilla as http://bugzilla.kernel.org/show_bug.cgi?id=6723 Also fix a misuse of "__devinit" for the quirk functions. It must not be used without first ensuring that the references from the quirk tables are gone, and that the function using those quirk tables is also gone. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: usbnet reports minidriver name through ethtoolDavid Brownell
Update "usbnet" so that ethtool reports the name of the minidriver in use (e.g. asix, cdc_ether, dm9601, rndis_host) instead of "usbnet". This is a better match to how other network drivers work, resolving a minor open issue. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: rndis_host, various cleanupsDavid Brownell
Cleanups to the rndis_host code, and a tweak that helps talking to PXA hardware. Mostly from Ole André Vadla Ravnås <oleavr@gmail.com> - Prevent SET_INTERFACE requests, they give PXA hardware bad indigestion - For paranoia, null a pointer after freeing its data - Wrap up ActiveSync oddities for RNDIS_QUERY in one routine - Use that wrapper when getting the Ethernet address - Whitespace fixes Plus add a comment noting the open issues about some RNDIS clients still needing TBD kinds of browbeating to accept non-jumbogram packets. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix signed jiffies issue in autosuspend logicAlan Stern
This patch (as897) changes the autosuspend timer code to use the standard types and macros in dealing with jiffies values. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbmon: bus zeroPete Zaitcev
Add the "bus zero" feature to the usbmon. If a user process specifies bus with number zero, it receives events from all buses. This is useful when we wish to see initial enumeration when a bus is created, typically after a modprobe. Until now, an application had to loop until a new bus could be open, then start capturing on it. This procedure was cumbersome and could lose initial events. Also, often it's too bothersome to find exactly to which bus a specific device is attached. Paolo Albeni provided the original concept implementation. I added the handling of "bus->monitored" flag and generally fixed it up. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: Allow transfer_buffer with transfer_dmaTony Lindgren
Some host controller drivers may need a PIO fallback when a DMA channel is temporarily unavailable. This patch provides an address that such drivers can use for PIO in those cases, and nulls that field out when no such address is available (highmem) which should help usbmon. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cleanup ofd adutuxOliver Neukum
this driver does - ignore errors during open - submit a running urb - use down_interruptible not handling signals - GFP_KERNEL with a spinlock held Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add "last_busy" field for use in autosuspendAlan Stern
This patch (as877) adds a "last_busy" field to struct usb_device, for use by the autosuspend framework. Now if an autosuspend call comes at a time when the device isn't busy but hasn't yet been idle for long enough, the timer can be set to exactly the desired value. And we will be ready to handle things like HID drivers, which can't maintain a useful usage count and must rely on the time-of-last-use to decide when to autosuspend. The patch also makes some related minor improvements: Move the calls to the autosuspend condition-checking routine into usb_suspend_both(), which is the only place where it really matters. If the autosuspend timer is already running, don't stop and restart it. Replace immediate returns with gotos so that the optional debugging ouput won't be bypassed. If autoresume is disabled but the device is already awake, don't return an error for an autoresume call. Don't try to autoresume a device if it isn't suspended. (Yes, this undercuts the previous change -- so sue me.) Don't duplicate existing code in the autosuspend work routine. Fix the kerneldoc in usb_autopm_put_interface(): If an autoresume call fails, the usage counter is left unchanged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: whiteheat: Convert to generic booleanRichard Knutsson
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Acked-by: Stuart MacDonald <stuartm@connecttech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix omninet write vs. close raceOliver Neukum
omninet kills all URBs in close. However write() returns as soon as the URB has been submitted. Killing the last URB means a race that can lose that date written in the last call to write(). As a fix this is moved to shutdown(). Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix error handling for mct_u232Oliver Neukum
we report errors to the caller. THis patch adds error handling to the driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix error handling in kl5kusbOliver Neukum
- report errors - cleanup in error case - use of endianness macros Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix catc error handlingOliver Neukum
this driver ignores errors while starting the transmit queue. It will never be reported stopped as the completion handler won't run and it will never be started again as it will be considered started. This patch adds error handling. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cypress_cy7c63: race disconnect/sysfs read-write leading to following ↵Oliver Neukum
NULL pointer this driver sets intfdata to NULL while it still can be read and happily followed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix ark3116 memory leakOliver Neukum
this driver has a memory leak in an error case. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: ftdi_sio: Add USB ID of ADSTech USBX-707Jelle Foks
This patch adds the USB ID of the ADS Tech USBX-707 USB IR blaster (that comes with the ADS Tech PTV-305 grabber card), which has a ftdi232bm inside hooked up to a pic. With this it should be fairly straightforward to make at least lirc receiving work with this device. I will submit a patch to lirc for that as soon as I have one ready, I'm getting data with minicom with this patch, but need to figure out some more details such as best/correct baudrate. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix race in ftdio_writeOliver Neukum
this has the same race as the visor driver. The counter must be incremented under the lock it is checked under. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix race in visor_writeOliver Neukum
this fixes a small race in visor_write. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: aircable cleanupOliver Neukum
- proper endianness macros - scheduling in interrupt in error case Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Naranjo Manuel Francisco <naranjo.manuel@gmail.com>
2007-04-27USB: make usbdevices export their device nodes instead of using a separate classKay Sievers
o The "real" usb-devices export now a device node which can populate /dev/bus/usb. o The usb_device class is optional now and can be disabled in the kernel config. Major/minor of the "real" devices and class devices are the same. o The environment of the usb-device event contains DEVNUM and BUSNUM to help udev and get rid of the ugly udev rule we need for the class devices. o The usb-devices and usb-interfaces share the same bus, so I used the new "struct device_type" to let these devices identify themselves. This also removes the current logic of using a magic platform-pointer. The name of the device_type is also added to the environment which makes it easier to distinguish the different kinds of devices on the same subsystem. It looks like this: add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1 SUBSYSTEM=usb SEQNUM=1533 MAJOR=189 MINOR=131 DEVTYPE=usb_device PRODUCT=46d/c03e/2000 TYPE=0/0/0 BUSNUM=002 DEVNUM=004 This udev rule works as a replacement for usb_device class devices: SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" Updated patch, which needs the device_type patches in Greg's tree. I also got a bugzilla assigned for this. :) https://bugzilla.novell.com/show_bug.cgi?id=250659 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: gadget-storage needs BLOCKRandy Dunlap
With CONFIG_BLOCK=n, this build error happens: WARNING: "bdev_read_only" [drivers/usb/gadget/g_file_storage.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add power/level sysfs attributeAlan Stern
This patch (as874) adds another piece to the user-visible part of the USB autosuspend interface. The new power/level sysfs attribute allows users to force the device on (with autosuspend off), force the device to sleep (with autoresume off), or return to normal automatic operation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: ati_remote2: Add channel supportPeter Stokes
Add logical channel support for ATI Remote Wonder II The ATI Remote Wonder II can be configured with one of 16 unique logical channels. Allowing up to 16 remotes to be used independently within range of each other. This change adds functionality to configure the receiver and filter the input data to respond or exclude remotes configured with different logical channels. Signed-off-by: Peter Stokes <linux@dadeos.freeserve.co.uk> Acked-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: sierra close raceOliver Neukum
the sierra driver does not directly use usb_kill_urb(). It uses a wrapper. This wrapper means that callbacks which are running are not killed during close, resubmitting and illicitly pushing data into the tty layer. The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed. The same problem as the option driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: option close raceOliver Neukum
the option driver does not directly use usb_kill_urb(). It uses a wrapper. This wrapper means that callbacks which are running are not killed during close, resubmitting and illicitly pushing data into the tty layer. The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: omninet memory leak in error caseOliver Neukum
memory allocated must be freed in the error case. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27UHCI: Add some WARN_ON()sAlan Stern
This patch (as872) adds some WARN_ON()s to various error checks which are never supposed to fail. Unsettlingly, one of them has shown up in a user's log! Maybe making the warning more visible and having the call-stack information available will help pinpoint the source of the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix endianness in mos7720Oliver Neukum
there's code unclean w.r.t. endianness in the mos7720 driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: gtco.c: fix a use-before-checkAdrian Bunk
NULL checks should be before the first dereference. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: iowarrior.c: fix NULL dereferenceOliver Neukum
Am Montag, 19. 2007 10:25 schrieb Adrian Bunk: > The Coverity checker spotted the following NULL dereference: And this fixes an oops upon allocation failures. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>