aboutsummaryrefslogtreecommitdiff
path: root/drivers/video/geode/lxfb_ops.c
AgeCommit message (Collapse)Author
2008-04-28lxfb/gxfb: when blanking with FB_BLANK_POWERDOWN, also turn off the CRTAndres Salomon
The Display Control's CRT_EN can be shut off when we enter FB_BLANK_POWERDOWN in an attempt to save additional power. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28lxfb: add power management functionalityAndres Salomon
This adds the ability to suspend/resume the lxfb driver, which includes: - Register and palette saving code; registers are stored in lxfb_par. A few MSR values are saved as well. - lx_powerup and lx_powerdown functions which restore/save registers and enable/disable graphic engines. - lxfb_suspend/lxfb_resume Originally based on a patch by Jordan Crouse. [akpm@linux-foundation.org: be conventional, save an ifdef] Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28lxfb: rearrange/rename MSR bitfieldsAndres Salomon
Finally, move the MSR bitfields around in lxfb.h, and rename them. Alas, most of that crap appears to be undocumented. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28lxfb: clean up register definitionsAndres Salomon
- Rename various bitfield defines to match the data sheet names. - Rename DF_ register definitions to VP_ to match the data sheet; ie, DF_PAR -> VP_PAR. - for GP/DC registers, rather than defining to specific addresses, use an enum to number them sequentially and just multiply by 4 (bytes) to access them (in read_*/write_* functions). - for VP/FP registers, use an enum and multiple by 8 (bytes). They're 64bit registers. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28lxfb: create GP/DC/VP/FP-specific handlers rather than using readl/writelAndres Salomon
This creates read_gp/write_gp, read_dc/write_dc, read_vp/write_vp, and read_fp/write_fp for reading and updating those registers. Note that we don't follow the 'DF' naming; those will be renamed to VP shortly. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28lxfb: extend PLL table to support dotclocks below 25 MHzJens Rottmann
Extends the PLL frequency table of the AMD Geode-LX frame buffer driver to make use of the DIV4 bit, thus adding support for dotclocks between 6 and 25 MHz. These are needed for small LCDs (e.g. 320x240). Also inserts some intermediate steps between pre-existing frequencies. Signed-off-by: Jens Rottmann <JRottmann@LiPPERT-AT.de> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28x86: geode: MSR cleanupAndres Salomon
This cleans up a few MSR-using drivers in the following manner: - Ensures MSRs are all defined in asm/geode.h, rather than in misc places - Makes the naming consistent; cs553[56] ones begin with MSR_, GX-specific ones start with MSR_GX_, and LX-specific ones start with MSR_LX_. Also, make the names match the data sheet. - Use MSR names rather than numbers in source code - Document the fact that the LX's MSR_PADSEL has the wrong value in the data sheet. That's, uh, good to note. Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31lxfb: GEODE: Add framebuffer support for the AMD Geode LXJordan Crouse
Add framebuffer support for the AMD Geode LX graphics engine. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>