aboutsummaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2006-02-19kbuild: remove checkconfig.plBrian Gerst
checkconfig.pl is no longer needed now that autoconf.h is automatically included. Remove it and all references to it. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-02-17[PATCH] Fix SGI O2 compile error in drivers/video/gbefb.cJoshua Kinard
A sysfs function call uses the wrong parameter, and thus breaks a build on SGI O2. CC drivers/video/gbefb.o drivers/video/gbefb.c: In function ‘gbefb_remove’: drivers/video/gbefb.c:1246: error: ‘dev’ undeclared (first use in this function) drivers/video/gbefb.c:1246: error: (Each undeclared identifier is reported only once drivers/video/gbefb.c:1246: error: for each function it appears in.) make[2]: *** [drivers/video/gbefb.o] Error 1 Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2006-02-15[PATCH] neofb: avoid resetting display config on unblank (v2)Christian Trefzer
There were two mistakes in the register-read-on-(un)blank approach. - First, without proper register (un)locking the value read back will always be zero, and this is what I missed entirely until just now. Due to this, the logic could not be verified at all and I tried some bogus checks which are completely stupid. - Second, the LCD status bit will always be set to zero when the backlight has been turned off. Reading the value back during unblank will disable the LCD unconditionally, regardless of the state it is supposed to be in, since we set it to zero beforehand. So this is what we do now: - create a new variable in struct neofb_par, and use that to determine whether to read back registers (initialized to true) - before actually blanking the screen, read back the register to sense any possible change made through Fn key combo - use proper neoUnlock() / neoLock() to actually read something - every call to neofb_blank() determines if we read back next time: blanking disables readback, unblanking (FB_BLANK_UNBLANK) enables it This should give us a nice and clean state machine. Has been thoroughly tested on a Dell Latitude CPiA / NM220 Chip docked to a C/Dock2 with attached CRT in all possible combinations of LCD/CRT on/off. I changed the config via Fn key, let the console blank, unblanked by keypress - works flawlessly. Signed-off-by: Christian Trefzer <ctrefzer@gmx.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[ARM] remove duplicate #includesHerbert Poetzl
Signed-off-by: Herbert P?tzl <herbert@13thfloor.at> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-14[PATCH] neofb: avoid resetting display config on unblankChristian Trefzer
Fix issues with the NeoMagic framebuffer driver. It nicely complements my previous fix already in linus' tree. The only thing missing now is that the external CRT will not be activated at neofb init when external-only is selected, either by register read or module/kernel parameter. Testing was done on a Dell Latitude CPi-A/NM2200 chip. Previous behaviour: - before booting linux, set the preferred display config X via FN+F8 - boot linux, neofb stores the register values in a private variable - change the display config to Y via keystroke - leave the machine in peace until display is blanked - touching any key will result in display config X being restored - booting up, the BIOS will acknowledge config Y, though... Current behaviour: At the time of unblanking, config Y is honoured because we now read back register contents instead of just overwriting them with outdated values. Signed-off by: Christian Trefzer <ctrefzer@gmx.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-11[PATCH] fbdev: video_setup() warning fixAndrew Morton
drivers/video/fbmem.c:1567: warning: 'video_setup' defined but not used Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-11[PATCH] nvidiafb: Add support for Geforce4 MX 4000Antonino A. Daplas
Add support for Geforce4 MX 4000 (0x185) Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-11[PATCH] drivers/video/Kconfig: remove unused BUS_I2C optionAdrian Bunk
The BUS_I2C option is neither available (since there is no VISWS option in the kernel) nor does it have any effect - so why not remove it? Based on a report by Jean-Luc Leger <reiga@dspnet.fr.eu.org>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-07[PATCH] remove bogus asm/bug.h includes.Al Viro
A bunch of asm/bug.h includes are both not needed (since it will get pulled anyway) and bogus (since they are done too early). Removed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-03Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds
2006-02-01[PATCH] i810fb: Do not probe the third i2c bus by defaultManuel Lauss
Some time before 2.6.15, a third DDC channel was added to i810fb. On systems where these ddc pins are not connected, the probe takes about 10 seconds. Add a boot/module option for i810fb to explicitly probe for the 3rd ddc bus if needed. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] video: hp680 backlight driverAndriy Skulysh
This adds support for the hp680 backlight, as found in the hp6xx series of sh devices. Signed-off-by: Andriy Skulysh <askulysh@image.kiev.ua> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[PATCH] PCI: cyblafb: remove pci_module_init() return, really.Arthur Othieno
Richard Knutsson <ricknu-0@student.ltu.se> did the original pci_module_init() cleanups: http://marc.theaimsgroup.com/?l=linux-kernel&m=113330872125068&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113330888507321&w=2 Greg, on it's way upstream, pci_module_init() return sneaked back in for cyblafb? http://marc.theaimsgroup.com/?l=linux-pci&m=113652969209562&w=2 http://marc.theaimsgroup.com/?l=linux-pci&m=113683930220421&w=2 Remove for good. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-26[ARM] amba-clcd: Allow RGB555 and RGB565 with 16bppRussell King
Some folk want to use RGB555 rather tahn RGB565 with amba-clcd. Allow amba-clcd to accept either pixel format. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-22[PARISC] Use kzalloc and other janitor-style cleanupsHelge Deller
Helge, o Convert a bunch of kmalloc/memset uses to kzalloc. o pci.c: Add some __read_mostly annotations. o pci.c: Move constant pci_post_reset_delay to asm/pci.h o grfioctl.h: Add A4450A to comment of CRT_ID_VISUALIZE_EG. o Add some consts to perf.c/perf_images.h Matthew, o sticore.c: Add some consts to suppress compile warnings. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-17[SPARC]: Fix sbusfb build.David S. Miller
sbusfb_compat_ioctl() needs to return int, not long, as that is what the fb_ops->fb_compat_ioctl method prototype wants. Need to git rid of the "struct file *file" first argument to fbiogetputcmap() and fbiogscursor() to match calls done in sbusfb_compat_ioctl(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-16[PATCH] fix up sbuslib for new fb_comapt_ioctl prototypeChristoph Hellwig
After ages my fb ioctl prototype cleanup finally got in. Unfortunately the patch are so old that the sbus compat_ioctl helper didn't exist back then, so it's not covered. This patch should fix that issue. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2006-01-15[PATCH] ppc: Remove powermac support from ARCH=ppcPaul Mackerras
This makes it possible to build kernels for PReP and/or CHRP with ARCH=ppc by removing the (non-building) powermac support. It's now also possible to select PReP and CHRP independently. Powermac users should now build with ARCH=powerpc instead of ARCH=ppc. (This does mean that it is no longer possible to build a 32-bit kernel for a G5.) Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14[PATCH] fbdev: Sanitize ->fb_mmap prototypeChristoph Hellwig
No need for a file argument. If we'd really need it it's in vma->vm_file already. gbefb and sgivwfb used to set vma->vm_file to the file argument, but the kernel alrady did that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] fbdev: Sanitize ->fb_ioctl prototypeChristoph Hellwig
The ioctl and file arguments to ->fb_mmap are totally unused and there's not reason a driver should need them. Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] gx1fb: (try to) play nicer with various BIOSesDavid Vrabel
Seems that the CS5530A chip used in Geode GX1 systems has some crazy feature that causes SMI traps when accessing the PCI configuration space of the video device. Various GX1 BIOSes seem to use this 'feature' to hide the real BARs of the device. This patch disables these traps (in an early PCI fixup) so that Linux sees the real, physical BARs and not the virtual ones provided by the BIOS. This should allow the GX1 framebuffer driver to work on more systems that have different BIOSes as the driver no longer guesses at what the virtual BARs mean. I'm not entirely sure it the correct solution as I can neither test regular VGA console nor the X's 'cyrix' video driver so there might be some breakage there -- probably best to get some more testers before applying it. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] neofb: take existing display configuration as defaultChristian Trefzer
On a Dell Latitude CPi-A I noticed a strangeness wrt. the handling of an external monitor by the neomagic framebuffer driver, namely when the laptop is docked in a C/Dock II with the lid shut. A cold boot would result in the BIOS configuring the video chip to use the "external monitor only" mode, yet neofb would default to "internal LCD only". An attempt for a quick fix by using the Fn-F8 keystroke to toggle the display combination modes resulted in a reproductible hard lock, powering down being the only solution. The attached patch makes neofb probe the register for the current display mode, using that value as a default if nothing was specified as kernel/module parameter. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] Unlinline a bunch of other functionsArjan van de Ven
Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] m68k: fix macfb initAl Viro
To be used by module_init() function should return int; same for functions that have "return -ENODEV;" in them, actually ;-) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] m68k: amifb __user annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] m68k: dumb typo in atyfbAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] m68k: namespace pollution fix (custom->amiga_custom)Al Viro
in amigahw.h custom renamed to amiga_custom, in drivers with few instances the same replacement, in the rest - #define custom amiga_custom in driver itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PARISC] stifb: Remove obsolete MODULE_PARM()Helge Deller
The bpp module parameter has been obsoleted in favour of a setup string, so remove the MODULE_PARM. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10[PARISC] stifb: Fix framebuffer console at 32bppHelge Deller
Fix stifb framebuffer console at 32bpp on a HCRX-24 card by properly setting DIRECTCOLOR. Also a few nice cleanups to the code. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10[PARISC] stifb: use F_EXTEND macroHelge Deller
Use the F_EXTEND() macro instead of open coding it with an #ifdef. Provides a nice cleanup. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10[PATCH] video/matrox/matroxfb_misc.c: remove dead codeAdrian Bunk
The Coverity checker spotted this dead code. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] drivers/video/: possible cleanupsAdrian Bunk
This patch contains the possible cleanups including the following: - every file should #include the headers containing the prototypes for it's global functions - make needlessly global functions static - kyro/STG4000Interface.h: #include video/kyro.h and linux/pci.h instead of a manual "struct pci_dev" - i810_main.{c,h}: prototypes for static functions belong to the C file Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] non-linear frame buffer read/write accessThomas Koeller
While the code in fbmem.c allows for hooking read/write access to non-linear frame buffers by means of fb_read and fb_write in struct fb_ops, I could not find a way tho access the actual frame buffer memory from within these routines. I therefore had to patch fbmem.c, to be able to retrieve a pointer to struct fb_info from the 'file' argument to these functions. The second hunk of the patch is not strictly required, I only did that for symmetry reasons (and the code is somewhat shorter). Signed-off-by: Thomas Koeller <thomas@koeller.dyndns.org> Acked-by: "Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbdev: Typos in KconfigYOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbdev: Replace kmalloc with kzallocAntonino A. Daplas
Replace kmalloc with kzalloc Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbcon: Code cleanupsAntonino A. Daplas
- replace kmalloc with kzalloc - remove repeated define (FONTCHHCNT) - remove unneeded local variable (redraw) in ypan_{up|down}_redraw - add and delete cursor timer in fbcon_switch() if old_info != info Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] i810fb: Fix suspend and resume hooksAntonino A. Daplas
The i810fb suspend and resume hooks have suffered bitrot over time. Update to current framework, but functionality still not guaranteed to work. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] s3c2410fb: cleanup and fixArnaud Patard
Here are some cleanups for the s3c2410fb drivers. It : * Removes a buggy call to s3c2410fb_init_registers. There was two calls to this function but the first was done without all initialisations done. No oops but it may confuse some LCDs. * Makes two functions static. Signed-Off-By: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-Off-By: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] nvidiafb: Reduce stack usageAntonino A. Daplas
Reduce stack usage of NVCommonSetup() Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] nvidiafb: Add boot option 'bpp'Antonino A. Daplas
Add boot/module option 'bpp' so user can specify at what color depth to boot into. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbdev: Reduce stack usageAntonino A. Daplas
calc_mode_timings() and fb_get_mode() are using more than 500 bytes off the stack. Fix. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbdev: Fix return code of fb_read and fb_writeAntonino A. Daplas
Make fb_read() and fb_write() return 0 (EOF) instead of -ENOSPC if reading at or past the end of the framebuffer. This fixes user space apps hanging if info->fix.smem_len == 0. Whitespace changes. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] fbcon: disable ywrap if not supported by fbcon scrolling codeKnut Petersen
updatescrollmode() must not select ywrap scrolling if divides(vc->vc_font.height, yres) is not true as this is not supported by the actual ywrap scrolling code. The bug is triggered with e.g. mode 800x600, vxres 1024, vyres 8192, bpp 8, font dimensions 8x16, 8Mb video ram and FBINFO_HWACCEL_YWRAP set. If those conditions are met, scrolling is broken and garbage is permanently displayed at the bottom of the screen. No regression, no possible side effects. Definitely needed by cyblafb and probably needed by amifb. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] skeletonfb: Documentation updateAntonino A. Daplas
Update skeletonfb so it reflects recent (and somewhat old) changes of the framebuffer layer. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] nvidiafb: Add support for some pci-e chipsetsAntonino A. Daplas
Chipsets with PCI device ids & 0xf0 == 0x00f0 has their actual chipset type in offset 0x1800 of the mmio space. Add support for this. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] atyfb: LT/LG cleanupVille Syrjälä
Clean up LT and LG chip descriptions. "Mach64 LG" is called 3D Rage LT in the specs and ATI press releases. "Mach64 LT" is unclear. XFree86 driver doesn't know this chip at all. Windows display.inf calls it just "mach64 LT" and it uses the same driver as VT-A/GT-A and older chips. VT-B/GT-B and better use another driver and all of those chips have a more descriptive name in the display.inf file. That makes me think this chip is not a 3D Rage chip. Signed-off-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] atyfb: VT/GT cleanupVille Syrjälä
Clean up VT and GT chip descriptions. All B revision VT chips are called 264VT3. Verified from pictures of the chips as the specs are a bit unlear in this. GT revision B1 is Rage II, B2 is Rage II+. Specs and chip pictures seem to agree. VT revision A4 is 264VT2. Revision A3 is probably a plain 264VT. Signed-off-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] atyfb: Rage XL/XC cleanupVille Syrjälä
Clean up Rage XL/XC chip descriptions. Signed-off-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>