aboutsummaryrefslogtreecommitdiff
path: root/drivers/xen
AgeCommit message (Collapse)Author
2008-12-16xen: clean up asm/xen/hypervisor.hJeremy Fitzhardinge
Impact: cleanup hypervisor.h had accumulated a lot of crud, including lots of spurious #includes. Clean it all up, and go around fixing up everything else accordingly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-17xen: fix scrub_page()Jeremy Fitzhardinge
Impact: fix guest kernel crash with CONFIG_XEN_SCRUB_PAGES=y Jens noticed that scrub_page() has a buggy unmap of the wrong thing. (virtual address instead of page) Linus pointed out that the whole scrub_page() code is an unnecessary reimplementation of clear_highpage() to begin with. Just use clear_highpage() rather than reimplementing it poorly. Reported-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04drivers: remove duplicated #includeJianjun Kong
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23xen: compilation fix of drivers/xen/events.c on IA64Isaku Yamahata
use set_xen_guest_handle() instead of direct assigning. > linux-2.6/drivers/xen/events.c: In function 'xen_poll_irq': > linux-2.6/drivers/xen/events.c:757: error: incompatible types in assignment > make[4]: *** [drivers/xen/events.o] Error 1 Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23xen: portability clean up and some minor clean up for xencomm.cIsaku Yamahata
clean up of xencomm.c. is_phys_contiguous() is arch dependent function that depends on how virtual memory are laid out. So split out the function into arch specific code. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com>
2008-10-23xen: don't reload cr3 on suspendJeremy Fitzhardinge
It isn't necessary, and it makes the code needlessly non-portable. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22x86, um: ... and asm-x86 moveAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-16genirq: use iterators for irq_desc loopsThomas Gleixner
Use for_each_irq_desc[_reverse] for all the iteration loops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-10-16xen: fix memory access violation bug when CONFIG_HAVE_SPARSE_IRQ is enabledAlex Nixon
When sparse IRQs are enabled, it is not safe to assume an IRQ descriptor exists for every possible IRQ. This patch causes init_evtchn_cpu_bindings to skip initialisation of IRQ descriptors which don't exist. Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: sparse irqs: use irq_desc() together with dyn_array, instead of ↵Yinghai Lu
irq_desc[] add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16drivers/xen: use nr_irqsYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-03xen: remove unused balloon.hJeremy Fitzhardinge
The balloon driver doesn't have any externally callable functions at the moment, so remove the (effectively empty) header. We can add it back if we need to. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-10Merge branch 'core/xen' into x86/xenIngo Molnar
2008-09-08xen: fix 2.6.27-rc5 xen balloon driver warningsJeremy Fitzhardinge
Set the class so it doesn't clash with the normal memory class. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> ===================================================================
2008-09-05Xen: fix cpu_hotplug build when !CONFIG_SMPAlex Nixon
Compile cpu_hotplug.c conditionally on CONFIG_HOTPLUG_CPU Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05Xen: fix cpu_hotplug.c build by replacing is_running_on_xen() with ↵Alex Nixon
xen_pv_domain() Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-26stop_machine: wean Xen off stop_machine_runRusty Russell
This is the last use of (the deprecated) stop_machine_run in the tree. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2008-08-25xen: implement CPU hotpluggingAlex Nixon
Note the changes from 2.6.18-xen CPU hotplugging: A vcpu_down request from the remote admin via Xenbus both hotunplugs the CPU, and disables it by removing it from the cpu_present map, and removing its entry in /sys. A vcpu_up request from the remote admin only re-enables the CPU, and does not immediately bring the CPU up. A udev event is emitted, which can be caught by the user if he wishes to automatically re-up CPUs when available, or implement a more complex policy. Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21xen: save previous spinlock when blockingJeremy Fitzhardinge
A spinlock can be interrupted while spinning, so make sure we preserve the previous lock of interest if we're taking a lock from within an interrupt handler. We also need to deal with the case where the blocking path gets interrupted between testing to see if the lock is free and actually blocking. If we get interrupted there and end up in the state where the lock is free but the irq isn't pending, then we'll block indefinitely in the hypervisor. This fix is to make sure that any nested lock-takers will always leave the irq pending if there's any chance the outer lock became free. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20xen: clean up domain mode predicatesJeremy Fitzhardinge
There are four operating modes Xen code may find itself running in: - native - hvm domain - pv dom0 - pv domU Clean up predicates for testing for these states to make them more consistent. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31xen: compile irq functions without -pg for ftraceJeremy Fitzhardinge
For some reason I managed to miss a bunch of irq-related functions which also need to be compiled without -pg when using ftrace. This patch moves them into their own file, and starts a cleanup process I've been meaning to do anyway. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Alex Nixon (Intern)" <Alex.Nixon@eu.citrix.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28xen-balloon: clean up unused functionsJeremy Fitzhardinge
Remove some unused functions: balloon_update_driver_allowance balloon_release_driver_page only used on the (obsolete, removed) flip path in netfront alloc_empty_pages_and_pagevec free_empty_pages_and_pagevec only used in backend drivers; can be reintroduced when needed Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28xen-balloon: fix up sysfs issuesJeremy Fitzhardinge
1. Set the class so it doesn't clash with the normal memory class 2. Fix up the sysfs show functions to match the new prototype 3. Clean up use of memparse Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: "viets@work.de" <viets@work.de> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-21sysdev: Pass the attribute to the low level sysdev show/store functionAndi Kleen
This allow to dynamically generate attributes and share show/store functions between attributes. Right now most attributes are generated by special macros and lots of duplicated code. With the attribute passed it's instead possible to attach some data to the attribute and then use that in shared low level functions to do different things. I need this for the dynamically generated bank attributes in the x86 machine check code, but it'll allow some further cleanups. I converted all users in tree to the new show/store prototype. It's a single huge patch to avoid unbisectable sections. Runtime tested: x86-32, x86-64 Compiled only: ia64, powerpc Not compile tested/only grep converted: sh, arm, avr32 Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21Merge branch 'x86/paravirt-spinlocks' into x86/for-linusIngo Molnar
2008-07-18linux-next: pci tree build failureStephen Rothwell
Today's linux-next build (x86_64 allmodconfig) failed like this: drivers/xen/manage.c: In function 'xen_suspend': drivers/xen/manage.c:66: error: too few arguments to function 'device_power_up' drivers/xen/manage.c: In function 'do_suspend': drivers/xen/manage.c:117: error: too few arguments to function 'device_resume' Caused by commit 1eede070a59e1cc73da51e1aaa00d9ab86572cfc ("Introduce new top level suspend and hibernation callbacks") interacting with new usages ... Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16xen: implement Xen-specific spinlocksJeremy Fitzhardinge
The standard ticket spinlocks are very expensive in a virtual environment, because their performance depends on Xen's scheduler giving vcpus time in the order that they're supposed to take the spinlock. This implements a Xen-specific spinlock, which should be much more efficient. The fast-path is essentially the old Linux-x86 locks, using a single lock byte. The locker decrements the byte; if the result is 0, then they have the lock. If the lock is negative, then locker must spin until the lock is positive again. When there's contention, the locker spin for 2^16[*] iterations waiting to get the lock. If it fails to get the lock in that time, it adds itself to the contention count in the lock and blocks on a per-cpu event channel. When unlocking the spinlock, the locker looks to see if there's anyone blocked waiting for the lock by checking for a non-zero waiter count. If there's a waiter, it traverses the per-cpu "lock_spinners" variable, which contains which lock each CPU is waiting on. It picks one CPU waiting on the lock and sends it an event to wake it up. This allows efficient fast-path spinlock operation, while allowing spinning vcpus to give up their processor time while waiting for a contended lock. [*] 2^16 iterations is threshold at which 98% locks have been taken according to Thomas Friebel's Xen Summit talk "Preventing Guests from Spinning Around". Therefore, we'd expect the lock and unlock slow paths will only be entered 2% of the time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <clameter@linux-foundation.org> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Virtualization <virtualization@lists.linux-foundation.org> Cc: Xen devel <xen-devel@lists.xensource.com> Cc: Thomas Friebel <thomas.friebel@amd.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16xen: add xen_arch_resume()/xen_timer_resume hook for ia64 supportIsaku Yamahata
add xen_timer_resume() hook. Timer resume should be done after event channel is resumed. add xen_arch_resume() hook when ipi becomes usable after resume. After resume, some cpu specific resource must be reinitialized on ia64 that can't be set by another cpu. However available hooks is run once on only one cpu so that ipi has to be used. During stop_machine_run() ipi can't be used because interrupt is masked. So add another hook after stop_machine_run(). Another approach might be use resume hook which is run by device_resume(). However device_resume() may be executed on suspend error recovery path. So it is necessary to determine whether it is executed on real resume path or error recovery path. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-14Merge branch 'x86/for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (821 commits) x86: make 64bit hpet_set_mapping to use ioremap too, v2 x86: get x86_phys_bits early x86: max_low_pfn_mapped fix #4 x86: change _node_to_cpumask_ptr to return const ptr x86: I/O APIC: remove an IRQ2-mask hack x86: fix numaq_tsc_disable calling x86, e820: remove end_user_pfn x86: max_low_pfn_mapped fix, #3 x86: max_low_pfn_mapped fix, #2 x86: max_low_pfn_mapped fix, #1 x86_64: fix delayed signals x86: remove conflicting nx6325 and nx6125 quirks x86: Recover timer_ack lost in the merge of the NMI watchdog x86: I/O APIC: Never configure IRQ2 x86: L-APIC: Always fully configure IRQ0 x86: L-APIC: Set IRQ0 as edge-triggered x86: merge dwarf2 headers x86: use AS_CFI instead of UNWIND_INFO x86: use ignore macro instead of hash comment x86: use matching CFI_ENDPROC ...
2008-07-03xen: Avoid allocations causing swap activity on the resume pathIan Campbell
Avoid allocations causing swap activity on the resume path by preventing the allocations from doing IO and allowing them to access the emergency pools. These paths are used when a frontend device is trying to connect to its backend driver over Xenbus. These reconnections are triggered on demand by IO, so by definition there is already IO underway, and further IO would naturally deadlock. On resume, this path is triggered when the running system tries to continue using its devices. If it cannot then the resume will fail; to try to avoid this we let it dip into the emergency pools. [ linux-2.6.18-xen changesets e8b49cfbdac, fdb998e79aba ] Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-20xen: Use wmb instead of rmb in xen_evtchn_do_upcall().Isaku Yamahata
This patch is ported one from 534:77db69c38249 of linux-2.6.18-xen.hg. Use wmb instead of rmb to enforce ordering between evtchn_upcall_pending and evtchn_pending_sel stores in xen_evtchn_do_upcall(). Cc: Samuel Thibault <samuel.thibault@eu.citrix.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: the arch/x86 maintainers <x86@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-20xen: Use wmb instead of rmb in xen_evtchn_do_upcall().Isaku Yamahata
This patch is ported one from 534:77db69c38249 of linux-2.6.18-xen.hg. Use wmb instead of rmb to enforce ordering between evtchn_upcall_pending and evtchn_pending_sel stores in xen_evtchn_do_upcall(). Cc: Samuel Thibault <samuel.thibault@eu.citrix.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: the arch/x86 maintainers <x86@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02CONFIG_PM_SLEEP fix: xen: fix compilation when CONFIG_PM_SLEEP is disabledJeremy Fitzhardinge
Xen save/restore depends on CONFIG_PM_SLEEP being set for device_power_up/down. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-27xen: maintain clock offset over save/restoreJeremy Fitzhardinge
Hook into the device model to make sure that timekeeping's resume handler is called. This deals with our clocksource's non-monotonicity over the save/restore. Explicitly call clock_has_changed() to make sure that all the timers get retriggered properly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: implement save/restoreJeremy Fitzhardinge
This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xenbus: rebind irq on restoreJeremy Fitzhardinge
When restoring, rebind the existing xenbus irq to the new xenbus event channel. (It turns out in practice that this is always the same, and is never updated on restore. That's a bug, but Xeno-linux has been like this for a long time, so it can't really be fixed.) Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: fix unbind_from_irq()Jeremy Fitzhardinge
Rearrange the tests in unbind_from_irq() so that we can still unbind an irq even if the underlying event channel is bad. This allows a device driver to shuffle its irqs on save/restore before the underlying event channels have been fixed up. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add rebind_evtchn_irqJeremy Fitzhardinge
Add rebind_evtchn_irq(), which will rebind an device driver's existing irq to a new event channel on restore. Since the new event channel will be masked and bound to vcpu0, we update the state accordingly and unmask the irq once everything is set up. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: drivers/xen/balloon.c: make a function staticAdrian Bunk
Make the needlessly global balloon_set_new_target() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: compilation fix to balloon driver for ia64 supportIsaku Yamahata
fix compilation error of ballon driver on ia64. extent_start member is pointer argument. On x86 pointer argument for xen hypercall is passed as virtual address. On the other hand, ia64 and ppc, pointer argument is passed in pseudo physical address. (guest physicall address.) So they must be passed as handle and convert right before issuing hypercall. CC drivers/xen/balloon.o linux-2.6-x86/drivers/xen/balloon.c: In function 'increase_reservation': linux-2.6-x86/drivers/xen/balloon.c:228: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'decrease_reservation': linux-2.6-x86/drivers/xen/balloon.c:324: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'dealloc_pte_fn': linux-2.6-x86/drivers/xen/balloon.c:486: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'alloc_empty_pages_and_pagevec': linux-2.6-x86/drivers/xen/balloon.c:522: error: incompatible types in assignment make[2]: *** [drivers/xen/balloon.o] Error 1 Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: Move manage.c to drivers/xen for ia64/xen supportIsaku Yamahata
move arch/x86/xen/manage.c under drivers/xen/to share codes with x86 and ia64. ia64/xen also uses manage.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: add balloon driverJeremy Fitzhardinge
The balloon driver allows memory to be dynamically added or removed from the domain, in order to allow host memory to be balanced between multiple domains. This patch introduces the Xen balloon driver, though it currently only allows a domain to be shrunk from its initial size (and re-grown back to that size). A later patch will add the ability to grow a domain beyond its initial size. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: Module autoprobing support for frontend driversMark McLoughlin
Add module aliases to support autoprobing modules for xen frontend devices. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen blkfront: Delay wait for block devices until after the disk is addedChristian Limpach
When the xen block frontend driver is built as a module the module load is only synchronous up to the point where the frontend and the backend become connected rather than when the disk is added. This means that there can be a race on boot between loading the module and loading the dm-* modules and doing the scan for LVM physical volumes (all in the initrd). In the failure case the disk is not present until after the scan for physical volumes is complete. Taken from: http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/11483a00c017 Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: import arch generic part of xencommIsaku Yamahata
On xen/ia64 and xen/powerpc hypercall arguments are passed by pseudo physical address (guest physical address) so that it's necessary to convert from virtual address into pseudo physical address. The frame work is called xencomm. Import arch generic part of xencomm. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: make grant table arch portableIsaku Yamahata
split out x86 specific part from grant-table.c and allow ia64/xen specific initialization. ia64/xen grant table is based on pseudo physical address (guest physical address) unlike x86/xen. On ia64 init_mm doesn't map identity straight mapped area. ia64/xen specific grant table initialization is necessary. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: replace callers of alloc_vm_area()/free_vm_area() with xen_ prefixed oneIsaku Yamahata
Don't use alloc_vm_area()/free_vm_area() directly, instead define xen_alloc_vm_area()/xen_free_vm_area() and use them. alloc_vm_area()/free_vm_area() are used to allocate/free area which are for grant table mapping. Xen/x86 grant table is based on virtual address so that alloc_vm_area()/free_vm_area() are suitable. On the other hand Xen/ia64 (and Xen/powerpc) grant table is based on pseudo physical address (guest physical address) so that allocation should be done differently. The original version of xenified Linux/IA64 have its own allocate_vm_area()/free_vm_area() definitions which don't allocate vm area contradictory to those names. Now vanilla Linux already has its definitions so that it's impossible to have IA64 definitions of allocate_vm_area()/free_vm_area(). Instead introduce xen_allocate_vm_area()/xen_free_vm_area() and use them. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: add resend_irq_on_evtchn() definition into events.cIsaku Yamahata
Define resend_irq_on_evtchn() which ia64/xen uses. Although it isn't used by current x86/xen code, it's arch generic so that put it into common code. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24Xen: make events.c portable for ia64/xen supportIsaku Yamahata
Remove x86 dependency in drivers/xen/events.c for ia64/xen support introducing include/asm/xen/events.h. Introduce xen_irqs_disabled() to hide regs->flags Introduce xen_do_IRQ() to hide regs->orig_ax. make enum ipi_vector definition arch specific. ia64/xen needs four vectors. Add one rmb() because on ia64 xchg() isn't barrier. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: move events.c to drivers/xen for IA64/Xen supportIsaku Yamahata
move arch/x86/xen/events.c undedr drivers/xen to share codes with x86 and ia64. And minor adjustment to compile. ia64/xen also uses events.c Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>