aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-03-03piix/slc90e66: more tuneproc() fixing (take 2)Sergei Shtylyov
The tuneproc() method in both these drivers failed to set the drive's own speed. Fix this by renaming the function and "wrapping around it" the new tuneproc() method. Switch back to calling tuneproc() in the PIO fallback code. While at it, also convert the rest of the PIO timing code into proper C. :-) Has been kind of tested on SLC90E66. I'm too lazy to reboot my box and test on ICH4... :-) [ bart: I quickly tested it on ICH4. ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-03ide: fix drive side 80c cable check, take 2Tejun Heo
eighty_ninty_three() had word 93 validitity check but not the 80c bit test itself (bit 13). This increases the chance of incorrect wire detection especially because host side cable detection is often unreliable and we sometimes soley depend on drive side cable detection. Fix it. [ bart: fix off-by-1 bit name in the patch description ] Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-03cmd64x: fix PIO mode setup (take 3)Sergei Shtylyov
The driver's tuneproc() method fails to set the drive's own speed -- fix this by renaming the function to cmd64x_tune_pio(), making it return the mode set, and "wrapping" the new tuneproc() method around it; while at it, also get rid of the non-working prefetch control code (filtering out related argument values in the "wrapper"), remove redundant PIO5 mode limitation, make cmdprintk() give more sensible mode info, and remove mention about the obsolete /proc/ interface. Get rid of the broken config_chipset_for_pio() which always tried to set PIO4, switch to always auto-tuning PIO instead. Oh, and add the missing PIO5 support to the speedproc() method while at it. :-) Warning: compile tested only -- getting to the real hardware isn't that easy... On Tuesday 06 February 2007 22:11, Mikael Pettersson <mikpe@it.uu.se> wrote: > > Worked fine on my SPARC Ultra5 with a CMD646 IDE controller. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-03alim15x3: fix PIO mode setupSergei Shtylyov
The driver's tuneproc() method fails to set the drive's own speed -- fix this by renaming the function to ali15x3_tune_pio() and "wrapping" the new tuneproc() method around it and making it return the mode set, update the heading comment. Also, setting PIO mode via the speedproc() method does not work due to passing to the tuneproc() method's a mode number not biased by XFER_PIO_0 -- fix this along with a typo in the heading comment... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-02Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: add CONFIG_PM to libata core layer libata: add missing CONFIG_PM in LLDs libata: add missing PM callbacks pata_qdi: Fix initialisation [libata] pata_cmd64x: fix driver description in comments [libata] pata_{legacy,sc1200,sl82c105}: add missing hooks [libata] change master/slave IDENTIFY order libata-core: Fix simplex handling
2007-03-02[netdrvr] tulip, de2104x: fix typo: s/__sparc_/__sparc__/Jeff Garzik
Noticed by Doug Nazar (via David Miller). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02mv643xx_eth: move mac_addr inside mv643xx_eth_platform_dataDale Farnsworth
The information contained within platform_data should be self-contained. Replace the pointer to a MAC address with the actual MAC address in struct mv643xx_eth_platform_data. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02Fix mv643xx_eth compilation.Dave Jones
Commit 908b637fe793165b6aecdc875cdca67c4959a1ad removed ETH_DMA_ALIGN but missed a usage of it in a macro, which broke the build. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02qla3xxx: bugfix for line omitted in previous patch.Ron Mercer
This missing line caused transmit errors on the Qlogic 4032 chip. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02NetXen: Fix second rmmod failure observed on PowerPC machines.Linsys Contractor Mithlesh Thukral
Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02NetXen: Updates, removal of unsupported features and minor bug fixes.Linsys Contractor Mithlesh Thukral
Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02cxgb3 - Tag driver versionDivy Le Ray
This patch adds a "-ko" tag to the driver version. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02myri10ge: fix copyright and licenseBrice Goglin
Fix copyright and license ("regents" should not have ever been used). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02jmr3927: do not call tc35815_killall().Ralf Baechle
No need to stop tc35815 before resetting the board. This fixes the build of tc35815 as a module. This also means there is no caller of tc35815_killall left, so remove that function also. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-03-02libata: add CONFIG_PM to libata core layerTejun Heo
Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02libata: add missing CONFIG_PM in LLDsTejun Heo
Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02libata: add missing PM callbacksTejun Heo
Some LLDs were missing scsi device PM callbacks while having host/port suspend support. Add missing ones. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02[AOE]: Add get_unaligned() calls where needed.David S. Miller
Based upon a report by Andrew Walrond. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02[RADEON]: Fix blanking return value.David S. Miller
If you'll recall, over a year ago, I pointed out that the current Radeon driver erroneously returns -EINVAL for valid blanking codes, here is a link to that thread: http://lkml.org/lkml/2006/1/28/6 No other driver does this, and it confuses the X server into thinking that the device does not support blanking properly. I looked again and there is simply no reason for the Radeon driver to return -EINVAL for FB_BLANK_NORMAL. It claims it wants to do this in order to convince fbcon to blank in software, right here: if (fb_blank(info, blank)) fbcon_generic_blank(vc, info, blank); to software blank the screen. But it only causes that to happen in the FB_BLANK_NORMAL case. That makes no sense because the Radeon code does this: val |= CRTC_DISPLAY_DIS; in the FB_BLANK_NORMAL case so should be blanking the hardware, and there is therefore no reason to SW blank by returning -EINVAL. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Antonino Daplas <adaplas@gmail.com>
2007-03-02pata_qdi: Fix initialisationAlan Cox
The QDI init code contains some bugs which mean it only works if you have a test setup that causes both a successful and failed probe. Fix this Found by Philip Guo (Who found it working on code analysis tools not running VLB IDE controllers) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02[libata] pata_cmd64x: fix driver description in commentsJeff Garzik
Trivial comment fix, taken out of a larger Alan Cox patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02[libata] pata_{legacy,sc1200,sl82c105}: add missing hooksJeff Garzik
Alan Cox noticed several hooks in pata_* drivers were missing, when he authored his ->cable_detect hook patches. This patch extracts just those fixes from Alan's patches, adding the necessary hooks (usually ->freeze, ->thaw, and ->post_internal_cmd) to the drivers. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02[libata] change master/slave IDENTIFY orderJeff Garzik
2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the needed changes. The basic requirement is that we have to identify the slave before the master. The patch switches the identify order so that we can do the drive side detection correctly. [NOTE: patch and description extracted from a larger work written and signed-off-by Alan Cox] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02libata-core: Fix simplex handlingAlan
The initial simplex handling code is fooled if you suspend and resume. This also causes problems with some single channel controllers which claim to be simplex. The fix is fairly simple, instead of keeping a flag to remember if we gave away the simplex channel we remember the actual owner. As the owner is always part of the host_set we don't even need a refcount. Knowing the owner also means we can reassign simplex DMA channels in future hotplug code etc if we need to Signed-off-by: Alan Cox <alan@redhat.com> (and a signed-off for the patch I sent before while I remember) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: improve spurious SDB FIS handling ahci/pata_jmicron: match class not function number jmicron ATA: reimplement jmicron ATA quirk pata_jmicron: drop unnecessary device programming in [re]init libata: blacklist FUJITSU MHT2060BH for NCQ sata_sil24: kill unused local variable idx in sil24_fill_sg() libata: clear drvdata in ata_host_release(), take#2
2007-03-01Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle button HID: add git tree information to MAINTAINERS HID: fix broken Logitech S510 keyboard report descriptor; make extra keys work HID: fix possible double-free on error path in hid parser HID: hid-debug.c should #include <linux/hid-debug.h> HID: fix bug in zeroing the last field byte in output reports USB HID: use CONFIG_HID_DEBUG for outputting report descriptor USB HID: Fix USB vendor and product IDs endianness for USB HID devices
2007-03-01Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (5305): Mark VIDIOC_DBG_S/G_REGISTER as experimental V4L/DVB (5271): Add VIDIOC_TRY_ENCODER_CMD and VIDIOC_ENCODER_CMD ioctls. V4L/DVB (5270): Add VIDIOC_G_ENC_INDEX ioctl V4L/DVB (5276): Cxusb: fix firmware patch for big endian systems V4L/DVB (5258): Cafe_ccic: fix compiler warning V4L/DVB (5295): Digitv: open nxt6000 i2c_gate for TDED4 tuner handling V4L/DVB (5304): Improve chip matching in v4l2_register V4L/DVB (5255): Fix cx25840 firmware loading.
2007-03-01ahci: improve spurious SDB FIS handlingTejun Heo
Spurious SDB FIS during NCQ might not contain spurious completions. It could be spurious TF update or invalid async notification. Treat as HSM violation iff a spurious SDB FIS contains spurious completions; otherwise, just whine once about it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01ahci/pata_jmicron: match class not function numberTejun Heo
Make jmiron_ata quirk update pdev->class after programming the device and update ahci and pata_jmicron such that they match class code instead of checking function number manually. For ahci, it matches for vendor and class. For pata_jmicron, it matches vendor, device and class as IDE class isn't as well defined as AHCI class. This makes jmicron device matching more conventional and script friendly. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01jmicron ATA: reimplement jmicron ATA quirkTejun Heo
Reimplement jmicron ATA quirk. * renamed to quirk_jmicron_ata() * quirk is invoked only for the affected controllers * programming is stricter. e.g. conf5 bit24 is cleared if unnecessary. * code factored for readability * JMB360 and JMB368 are programmed into proper mode Verified on JMB360, 363 and 368. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01pata_jmicron: drop unnecessary device programming in [re]initTejun Heo
Channel redirect and AHCI mode enable programmings are done via PCI quirk for both probe and resume paths. Drop duplicate and possibly unsafe device programming from pata_jmicron(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01libata: blacklist FUJITSU MHT2060BH for NCQTejun Heo
Blacklist FUJITSU MHT2060BH for NCQ. On this drive, NCQ works iff queue depth is equal to or less than 4. Just turn it off. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mike Accetta <maccetta@laurelnetworks.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01sata_sil24: kill unused local variable idx in sil24_fill_sg()Tejun Heo
Kill unused local variable idx in sil24_fill_sg(). Spotted by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01libata: clear drvdata in ata_host_release(), take#2Tejun Heo
Clearing drvdata in ->remove_one causes NULL pointer deference. Clear drvdata only in ata_host_release() after all resources are freed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01[PATCH] tty_io: fix race in master pty close/slave pty close pathAristeu Sergio Rozanski Filho
This patch fixes a possible race that leads to double freeing an idr index. When the master begin to close, release_dev() is called and then pty_close() is called: if (tty->driver->close) tty->driver->close(tty, filp); This is done without helding any locks other than BKL. Inside pty_close(), being a master close, the devpts entry will be removed: #ifdef CONFIG_UNIX98_PTYS if (tty->driver == ptm_driver) devpts_pty_kill(tty->index); #endif But devpts_pty_kill() will call get_node() that may sleep while waiting for &devpts_root->d_inode->i_sem. When this happens and the slave is being opened, tty_open() just found the driver and index: driver = get_tty_driver(device, &index); if (!driver) { mutex_unlock(&tty_mutex); return -ENODEV; } This part of the code is already protected under tty_mute. The problem is that the slave close already got an index. Then init_dev() is called and blocks waiting for the same &devpts_root->d_inode->i_sem. When the master close resumes, it removes the devpts entry, and the relation between idr index and the tty is gone. The master then sleeps waiting for the tty_mutex on release_dev(). Slave open resumes and found no tty for that index. As result, a NULL tty is returned and init_dev() doesn't flow to fast_track: /* check whether we're reopening an existing tty */ if (driver->flags & TTY_DRIVER_DEVPTS_MEM) { tty = devpts_get_tty(idx); if (tty && driver->subtype == PTY_TYPE_MASTER) tty = tty->link; } else { tty = driver->ttys[idx]; } if (tty) goto fast_track; The result of this, is that a new tty will be created and init_dev() returns sucessfull. After returning, tty_mutex is dropped and master close may resume. Master close finds it's the only use and both sides are closing, then releases the tty and the index. At this point, the idr index is free, but slave still has it. Slave open then calls pty_open() and finds that tty->link->count is 0, because there's no master and returns error. Then tty_open() calls release_dev() which executes without any warning, as it was a case of last slave close when the master is already closed (master->count == 0, slave->count == 1). The tty is then released with the already released idr index. This normally would only issue a warning on idr_remove() but in case of a customer's critical application, it's never too simple: thread1: opens master, gets index X thread1: begin closing master thread2: begin opening slave with index X thread1: finishes closing master, index X released thread3: opens master, gets index X, just released thread2: fails opening slave, releases index X <---- thread4: opens master, gets index X, init_dev() then find an already in use and healthy tty and fails If no more indexes are released, ptmx_open() will keep failing, as the first free index available is X, and it will make init_dev() fail because you're trying to "reopen a master" which isn't valid. The patch notices when this race happens and make init_dev() fail imediately. The init_dev() function is called with tty_mutex held, so it's safe to continue with tty till the end of function because release_dev() won't make any further changes without grabbing the tty_mutex. Without the patch, on some machines it's possible get easily idr warnings like this one: idr_remove called for id=15 which is not allocated. [<c02555b9>] idr_remove+0x139/0x170 [<c02a1b62>] release_mem+0x182/0x230 [<c02a28e7>] release_dev+0x4b7/0x700 [<c02a0ea7>] tty_ldisc_enable+0x27/0x30 [<c02a1e64>] init_dev+0x254/0x580 [<c02a0d64>] check_tty_count+0x14/0xb0 [<c02a4f05>] tty_open+0x1c5/0x340 [<c02a4d40>] tty_open+0x0/0x340 [<c017388f>] chrdev_open+0xaf/0x180 [<c017c2ac>] open_namei+0x8c/0x760 [<c01737e0>] chrdev_open+0x0/0x180 [<c0167bc9>] __dentry_open+0xc9/0x210 [<c0167e2c>] do_filp_open+0x5c/0x70 [<c0167a91>] get_unused_fd+0x61/0xd0 [<c0167e93>] do_sys_open+0x53/0x100 [<c0167f97>] sys_open+0x27/0x30 [<c010303b>] syscall_call+0x7/0xb using this test application available on: http://www.ruivo.org/~aris/pty_sodomizer.c Signed-off-by: Aristeu Sergio Rozanski Filho <aris@ruivo.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] Fix buffer overflow and races in capi debug functionsKarsten Keil
The CAPI trace debug functions were using a fixed size buffer, which can be overflowed if wrong formatted CAPI messages were sent to the kernel capi layer. The code was also not protected against multiple callers. This fix bug 8028. Additionally the patch make the CAPI trace functions optional. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] ps3: introduce CONFIG_PS3_ADVANCEDGeert Uytterhoeven
ps3: Introduce CONFIG_PS3_ADVANCED, as suggested by Roman Zippel, and use it to control questions about PS3 subsystems that may not be obvious for the casual user. This gets rid of the following warning on non-powerpc platforms: | drivers/video/Kconfig:1604:warning: 'select' used by config symbol 'FB_PS3' refer to undefined symbol 'PS3_PS3AV' Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] ACPI: make bay depend on dockKristen Carlson Accardi
Since the bay driver depends on the dock driver for proper notification, make this driver depend on the dock driver. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] drivers/isdn/gigaset: build asyncdata.o into the gigaset module (fix)Tilman Schmidt
a) Remove #define acrobatics that have become unnecessary by the move of asyncdata.o into the common part. b) Correct the rule for building the common part into the kernel when some or all hardware specific parts are built as modules. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Adrian Bunk <bunk@stusta.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] rtc_cmos oops fixDavid Brownell
Fix an oops on the rtc_device_unregister() path by waiting until the last moment before nulling the rtc->ops vector. Fix some potential oopses by having the rtc_class_open()/rtc_class_close() interface increase the RTC's reference count while an RTC handle is available outside the RTC framework. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: add support for reshape of a raid6NeilBrown
i.e. one or more drives can be added and the array will re-stripe while on-line. Most of the interesting work was already done for raid5. This just extends it to raid6. mdadm newer than 2.6 is needed for complete safety, however any version of mdadm which support raid5 reshape will do a good enough job in almost all cases (an 'echo repair > /sys/block/mdX/md/sync_action' is recommended after a reshape that was aborted and had to be restarted with an such a version of mdadm). Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: restart a (raid5) reshape that has been aborted due to a ↵NeilBrown
read/write error An error always aborts any resync/recovery/reshape on the understanding that it will immediately be restarted if that still makes sense. However a reshape currently doesn't get restarted. With this patch it does. To avoid restarting when it is not possible to do work, we call into the personality to check that a reshape is ok, and strengthen raid5_check_reshape to fail if there are too many failed devices. We also break some code out into a separate function: remove_and_add_spares as the indent level for that code was getting crazy. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: clean out unplug and other queue function on md shutdownNeilBrown
The mddev and queue might be used for another array which does not set these, so they need to be cleared. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: move warning about creating a raid array on partitions of the ↵NeilBrown
one device md tries to warn the user if they e.g. create a raid1 using two partitions of the same device, as this does not provide true redundancy. However it also warns if a raid0 is created like this, and there is nothing wrong with that. At the place where the warning is currently printer, we don't necessarily know what level the array will be, so move the warning from the point where the device is added to the point where the array is started. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: RAID6: clean up CPUID and FPU enter/exit codeH. Peter Anvin
- Use kernel_fpu_begin() and kernel_fpu_end() - Use boot_cpu_has() for feature testing even in userspace Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] md: fix raid10 recovery problem.NeilBrown
There are two errors that can lead to recovery problems with raid10 when used in 'far' more (not the default). Due to a '>' instead of '>=' the wrong block is located which would result in garbage being written to some random location, quite possible outside the range of the device, causing the newly reconstructed device to fail. The device size calculation had some rounding errors (it didn't round when it should) and so recovery would go a few blocks too far which would again cause a write to a random block address and probably a device error. The code for working with device sizes was fairly confused and spread out, so this has been tided up a bit. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] Fix failure paths in modules init in umem.cNeilBrown
If register_blkdev() or alloc-disk fail in mm_init() after pci_register_driver() succeeds, then mm_pci_driver is not unregistered properly: Cc: Philip Guo <pg@cs.stanford.edu> Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01[PATCH] drivers/video/sm501fb.c: make 4 functions staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01V4L/DVB (5305): Mark VIDIOC_DBG_S/G_REGISTER as experimentalHans Verkuil
Move VIDIOC_DBG_S/G_REGISTER from the internal ioctl list to the public ioctls, but mark it as experimental for now. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>