aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-04-28[PATCH] zd1211rw: Add AL2230S RF supportDaniel Drake
ZD1211 appears to be back in production: a number of new devices have been appearing! Some of them are using new radios. This patch adds support for the next generation AL2230 RF chip which has been spotted in a few new devices. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: Use compare_ether_addr()Daniel Drake
Suggested by Maxime Austruy, based on mac80211 changes from Stephen Hemminger Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28Rev tulip versionValerie Henson
Rev tulip version... things have changed since 2002! Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28Fix tulip SytemError typoValerie Henson
Fix an annoying typo - SytemError -> SystemError Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28TULIP: Natsemi dp83840a PHY fixThibaut VARENE
Fix a problem with Tulip 21142 HP branded PCI cards (PN#: B5509-66001), which feature a NatSemi DP83840A PHY. Without that patch, it is impossible to properly initialize the card's PHY, and it's thus impossible to monitor/configure it. [VAL: I'm happy with the 1.5 ms max delay; it doesn't seem excessive.] Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28TULIP: Fix for 64-bit MIPSValerie Henson
From: Jim Gifford <maillist@jg555.com>, Grant Grundler <grundler@parisc-linux.org>, Peter Horton <pdh@colonel-panic.org> With Grant's help I was able to get the tulip driver to work with 64 bit MIPS. [VAL: I'm happy with the 1.5 ms max delay; it doesn't seem excessive.] Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28tc35815: Zap changelog from source codeAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28tc35815: Fix an usage of streaming DMA API.Atsushi Nemoto
The tc35815 driver lacks a call to pci_dma_sync_single_for_device() on receiving. Recent fix of MIPS dma_sync_single_for_cpu() reveal this bug. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28pcnet32: change to use netdev_privDon Fry
use netdev_priv() instead of dev->priv Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28pcnet32: only allocate init_block dma consistentDon Fry
The patch below moves the init_block out of the private struct and only allocates init block with pci_alloc_consistent. This has two effects: 1. Performance increase for non cache coherent machines, because the CPU only data in the private struct are now cached 2. locks are working now for platforms, which need to have locks in cached memory Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ixgb: Use ARRAY_SIZE macro when appropriate.Ahmed S. Darwish
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28S2IO: Save/Restore unused buffer mappings in 2/3 buffer modeRamkrishna Vepa
- Save/Restore unused buffer mappings in 2/3 buffer mode to avoid frequent mapping - Save/Restore adapter reset count during adapter reset (Resending; forgot to cc netdev) Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28e1000: Use kcalloc()Yan Burman
Replace kmalloc+memsetout the driver. Slightly modified by Auke Kok. Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28e1000: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish
A patch to use ARRAY_SIZE macro already defined in kernel.h. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28network: add the missing phy_device speed information to phy_mii_ioctlShan Lu
Function `phy_mii_ioctl' returns physical device's information based on user requests. When requested to return the basic mode control register information (BMCR), the original implementation only returns the physical device's duplex information and forgets to return speed information, which should not be because BMCR register is used to hold both duplex and speed information. The patch checks the BMCR value against speed-related flags and fills the return structure's speed field accordingly. Signed-off-by: Shan <shanlu@cs.uiuc.edu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28sk98lin: handle pci_enable_device() return value in skge_resume()Dmitriy Monakhov
Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28dmfe: add support for Wake on lanMaxim Levitsky
Add support for WOL on Magic Packet and on link change Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28dmfe: add support for suspend/resumeMaxim Levitsky
This adds support for suspend resume [akpm@linux-foundation.org: fix CONFIG_PM=n, coding style] Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28phy layer: add kernel-doc + DocBookRandy Dunlap
Convert function documentation in drivers/net/phy/ to kernel-doc and add it to DocBook. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28user of the jiffies rounding code: e1000Arjan van de Ven
Use the round_jiffies() function in e1000. These timers all were of the "about once a second" or "about once every X seconds" variety and several showed up in the "what wakes the cpu up" profiles that the tickless patches provide. Some timers are highly dynamic based on network load; but even on low activity systems they still show up so the rounding is done only in cases of low activity, allowing higher frequency timers in the high activity case. The various hardware watchdogs are an obvious case; they run every 2 seconds but aren't otherwise specific of exactly when they need to run. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28tc35815 driver update (take 2)Atsushi Nemoto
Current tc35815 driver is very obsolete and less maintained for a long time. Replace it with a new driver based on one from CELF patch archive. Major advantages of CELF version (version 1.23, for kernel 2.6.10) are: * Independent of JMR3927. (Actually independent of MIPS, but AFAIK the chip is used only on MIPS platforms) * TX4938 support. * 64-bit proof. * Asynchronous and on-demand auto negotiation. * High performance on non-coherent architecture. * ethtool support. * Many bugfixes and cleanups. And improvoments since version 1.23 are: * TX4939 support. * NETPOLL support. * NAPI support. (disabled by default) * Reduce memcpy on receiving. * PM support. * Many cleanups and bugfixes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28drivers/net/qla3xxx.c: make 2 functions staticAdrian Bunk
This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28make drivers/net/s2io.c:vlan_strip_flag staticAdrian Bunk
This patch makes the needlessly global vlan_strip_flag static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28Add support for Seeq 8003 on Challenge S Mezz board.Ladislav Michl
Thanks to Jö Fahlke for donating hardware. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Forward porting of Ladis' 2.4 patch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ehea: NAPI multi queue TX/RX path for SMPJan-Bernd Themann
This patch provides a functionality that allows parallel RX processing on multiple RX queues by using dummy netdevices. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ehea: dynamic add / remove portJan-Bernd Themann
This patch introduces functionality to dynamically add / remove ehea ports via an userspace DLPAR tool. It creates a subnode for each logical port in the sysfs. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28chelsio: use const for virtual functionsStephen Hemminger
There are several uses of _ops structure in this driver that can be converted to const. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28chelsio: use C99 style initializationStephen Hemminger
Convert some initialized structures to C99 style. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28chelsio: remove unused code for 1G boardsStephen Hemminger
Some code for Chelsio 1G boards was put in the driver based on the vendor version (minus TOE). Well some of those board versions are only supported with TOE on the vendor driver, so additional dead code was added. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28[PATCH] bcm43xx: do not rebuild when kernel version changesSam Ravnborg
In bcm43xx_ethtool, UTS_RELEASE is used. Replacing this with utsname()->release avoids rebuilding this module each time the kernel version changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] hostap: Add D-Link DWL-650 Rev. P1 product idJouni Malinen
It looks like some of the PC Card manfid/product strings were lost when Host AP driver was converted to use PCMCIA_DEVICE_* helpers. This patch adds back D-Link DWL-650 Rev. P1 using the same product ID string match as the pcmcia-cs/cardmgr configuration used before. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] ipw2200: fix ieee80211_get_geo typoAndrew Morton
testing much? Cc: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] libertas: fix build breakage from netdev class_device -> deviceJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] wireless: remove obsolete text filesJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] hostap: use offsetof() instead of own equivalentPavel Roskin
The original macros result in gcc 4.2 warning about "cast from pointer to integer of different size" on 64-bit systems. Use of offsetof() on fields in substructures is widespread throughout the kernel code and should work whether offsetof() is defined using __compiler_offsetof() or a cast. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] Marvell Libertas 8388 802.11b/g USB driverMarcelo Tosatti
Add the Marvell Libertas 8388 802.11 USB driver. Signed-off-by: Marcelo Tosatti <marcelo@kvack.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: changed GFP_NOFS to GFP_KERNELUlrich Kunitz
Michael Buesch commented that GFP_NOFS should not be used in a network driver. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] ipw2200: add channels sysfs entryZhu Yi
Add 'channels' sysfs entry for ipw2200. The entry exports channels information for the user space. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-27Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: sis900: Allocate rx replacement buffer before rx operation usb-net/pegasus: simplify carrier detection
2007-04-27sis900: Allocate rx replacement buffer before rx operationNeil Horman
Just found a hole in my last patch. It was reported to me that shortly after we integrated this patch. The report was of an oops that took place inside of netif_rx when using the sis900 driver. Looking at my origional patch I noted that there was a spot between the new skb_alloc and the refill_rx_ring label where skb got reassigned to the pointer currently held in the rx_ring for the purposes of receiveing the frame. The result of this is however that the buffer that gets passed to netif_rx (if it is called), then gets placed right back into the rx_ring. So if you receive frames fast enough the skb being processed by the network stack can get corrupted. The reporter is testing out the fix I've written for this below (I'm not near my hardware at the moment to test myself), but I wanted to post it for review ASAP. I'll post test results when I hear them, but I think this is a pretty straightforward fix. It just uses a separate pointer to do the rx operation, so that we don't improperly reassign the pointer that we use to refill the rx ring. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27usb-net/pegasus: simplify carrier detectionDan Williams
Simplify pegasus carrier detection; rely only on the periodic MII polling. Reverts pieces of c43c49bd61fdb9bb085ddafcaadb17d06f95ec43. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SCSI] esp_scsi.c: Fix compilation.
2007-04-27Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (46 commits) [MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init() [MTD] [NAND] CM-x270 MTD driver [MTD] [NAND] Wrong calculation of page number in nand_block_bad() [MTD] [MAPS] fix plat-ram printk format [JFFS2] Fix compr_rubin.c build after include file elimination. [JFFS2] Handle inodes with only a single metadata node with non-zero isize [JFFS2] Tidy up licensing/copyright boilerplate. [MTD] [OneNAND] Exit loop only when column start with 0 [MTD] [OneNAND] Fix access the past of the real oobfree array [MTD] [OneNAND] Update Samsung OneNAND official URL [JFFS2] Better fix for all-zero node headers [JFFS2] Improve read_inode memory usage, v2. [JFFS2] Improve failure mode if inode checking leaves unchecked space. [JFFS2] Fix cross-endian build. [MTD] Finish conversion mtd_blkdevs to use the kthread API [JFFS2] Obsolete dirent nodes immediately on unlink, where possible. Use menuconfig objects: MTD [MTD] mtd_blkdevs: Convert to use the kthread API [MTD] Fix fwh_lock locking [JFFS2] Speed up mount for directly-mapped NOR flash ...
2007-04-27[MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init()Adrian Bunk
This patch converts the pci_module_init() usage to pci_register_driver(). It's currently #if 0'ed, but still not a bad idea to change it. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27[SCSI] esp_scsi.c: Fix compilation.Alexey Dobriyan
irqreturn.h for irqreturn_t and dma_addr_t being u128 warnings ;-) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27[MTD] [NAND] CM-x270 MTD driverMike Rapoport
This patch provides MTD support for NAND flash devices on CM-x270 modules. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (78 commits) USB: update MAINAINERS and CREDITS for Freescale USB driver USB: update gadget files for fsl_usb2_udc driver USB: add Freescale high-speed USB SOC device controller driver USB: quirk for broken suspend of IT8152F/G USB: iowarrior.c: timeouts too small in usb_control_msg calls USB: dell device id for option.c USB: Remove Huawei unusual_devs entry USB: CP2101 New Device IDs USB: add picdem device to ldusb usbfs micro optimitation USB: remove ancient/broken CRIS hcd usb ethernet gadget, workaround network stack API glitch USB: add "busnum" attribute for USB devices USB: cxacru: ADSL state management usbatm: Detect usb device shutdown and ignore failed urbs USB: Remove duplicate define of OHCI_QUIRK_ZFMICRO USB: BandRich BandLuxe HSDPA Data Card Driver USB gadget rndis: fix struct rndis_packet_msg_type unaligned bug USB Elan FTDI: check for driver registration status USB: sierra: add more checks on shutdown ...
2007-04-27Merge branch 'master' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (184 commits) V4L/DVB (5563): Radio-maestro.c Replace radio_ioctl to use video_ioctl2 V4L/DVB (5562): Radio-gemtek-pci.c Replace gemtek_pci_ioctl to use video_ioctl2 V4L/DVB (5560): Ivtv: fix incorrect bitwise-and for command flags. V4L/DVB (5558): Opera: use 7-bit i2c addresses V4L/DVB (5557): Cafe_ccic: check return value of pci_enable_device V4L/DVB (5556): Radio-gemtek.c Replace gemtek_ioctl to use video_ioctl2 V4L/DVB (5555): Radio-aimslab.c Replace rt_ioctl to use video_ioctl2 V4L/DVB (5554): Fix: vidioc_g_parm were not zeroing the memory V4L/DVB (5553): Replace typhoon_do_ioctl to use video_ioctl2 V4L/DVB (5552): Plan-b: Switch to refcounting PCI API V4L/DVB (5551): Plan-b: header change V4L/DVB (5550): Radio-sf16fmi.c Replace fmi_do_ioctl to use video_ioctl2 V4L/DVB (5549): Radio-sf16fmr2.c Replace fmr2_do_ioctl to use video_ioctl2 V4L/DVB (5548): Fix v4l2 buffer to the length V4L/DVB (5547): Add ENUM_FRAMESIZES and ENUM_FRAMEINTERVALS ioctls V4L/DVB (5546): Radio-terratec.c Replace tt_do_ioctl to use video_ioctl2 V4L/DVB (5545): Saa7146: Release capture buffers on device close V4L/DVB (5544): Budget-av: Make inversion setting configurable, add KNC ONE V1.0 card V4L/DVB (5543): Tda10023: Add support for frontend TDA10023 V4L/DVB (5542): Budget-av: Remove polarity switching of the clock for DVB-C ...
2007-04-27USB: update gadget files for fsl_usb2_udc driverLi Yang
Update gadget_chip.c, ether.c for newly added Freescale Highspeed USB device driver. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add Freescale high-speed USB SOC device controller driverLi Yang
Freescale high-speed USB SOC can be found on some Freescale processors among different architectures. It supports both host and device functions. This driver adds its device support for Linux USB Gadget layer. It is tested on MPC8349 and MPC8313, but should work on other platforms with minor tweaks. The driver passed USBCV 1.3 compliance tests. Note that this driver doesn't yet include OTG support. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jiang Bo <tanya.jiang@freescale.com> Signed-off-by: Bruce Schmid <duck@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 18:53:26 +0000