aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-04-28NetXen: Removal of redundant argument passingMithlesh Thukral
NetXen: Removal of redundant function call parameters and bug fixes. This patch will remove the redundant paramters which were being passed to many functions since now adapter->portnum can be used. Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28NetXen: Use multiple PCI functionsMithlesh Thukral
NetXen: Make driver use multiple PCI functions. This patch will make NetXen driver work with multiple PCI functions. This will make the usage of memory resources as well as interrupts more independent among different functions which results in better throughput. This change has been done after the multiport support is added in firmware. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28[netdrvr e100] experiment with doing RX in a similar manner to eepro100Scott Feldman
I was going to say that eepro100's speedo_rx_link() does the same DMA abuse as e100, but then I noticed one little detail: eepro100 sets both EL (end of list) and S (suspend) bits in the RFD as it chains it to the RFD list. e100 was only setting the EL bit. Hmmm, that's interesting. That means that if HW reads a RFD with the S-bit set, it'll process that RFD and then suspend the receive unit. The receive unit will resume when SW clears the S-bit. There is no need for SW to restart the receive unit. Which means a lot of the receive unit state tracking code in the driver goes away. So here's a patch against 2.6.14. (Sorry for inlining it; the mailer I'm using now will mess with the word wrap). I can't test this on XScale (unless someone has an e100 module for Gumstix :) . It should be doing exactly what eepro100 does with RFDs. I don't believe this change will introduce a performance hit because the S-bit and EL-bit go hand-in-hand meaning if we're going to suspend because of the S- bit, we're on the last resource anyway, so we'll have to wait for SW to replenish. (cherry picked from 29e79da9495261119e3b2e4e7c72507348e75976 commit)
2007-04-28mii: add kernel-doc notationRandy Dunlap
Add kernel-doc notation to drivers/net/mii.c functions. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28Fix sparse errors in drivers/net/ibmveth.cMichael Ellerman
drivers/net/ibmveth.c:96:46: error: marked inline, but without a definition drivers/net/ibmveth.c:96: warning: 'ibmveth_rxq_harvest_buffer' declared inline after being called drivers/net/ibmveth.c:96: warning: previous declaration of 'ibmveth_rxq_harvest_buffer' was here Just let the compiler decide, as it happens gcc 4.~ inlines it anyway. drivers/net/ibmveth.c:957:71: warning: Using plain integer as NULL pointer drivers/net/ibmveth.c:964:85: warning: Using plain integer as NULL pointer Split the long lines as well, ugly, but < 80 columns. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ucc_geth: version 1.1Kim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ucc_geth: fixes for ucc_geth_memcleanNicu Ioan Petru
The ucc_geth_memclean function can be called before the Tx BD rings, Rx BD rings and associated socket buffers are allocated (for example if ucc_fast_init fails). The current code doesn't check if p_tx_bd_ring[i] is null, generating a kernel panic when trying to free the associated socket buffers. The function can also fail when accessing the uninitialized list_head structures ugeth->group_hash_q and ugeth->ind_hash_q. In the current implementation the list heads are initialized only when maxGroupAddrInHash and maxIndAddrInHash are positive values, although I think it's better to always initialize them. Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ucc_geth: Implement Transmit on Demand supportMichael Reiss
Transmit on Demand: Fix spelling in config option, and make it actually enable TOD. Signed-off-by: Michael Reiss <michael.f.reiss@freescale.com> Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ucc_geth: Fix interrupt coalescing size and alignmentMichael Barkowski
The rx interrupt coalescing table alignment was "guessed" to be 4, but should be 64. The size should be 8 * number of queues + 4. Verified in the MPC8323E manual. Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ucc_geth: NAPI-related bug fixesMichael Reiss
Based partly on the gianfar driver, this patch fixes several bugs which were causing NAPI to be completely unusable. * An IRQ is still needed in NAPI, to kick off NAPI task, and for Tx processing. Request the IRQ. * If rx_work_limit = 0 we are not complete. * While running Rx NAPI processing we must mask Rx events, including Rx busy. * ucc_geth_rx function does not need a lock. Could lead to deadlock in NAPI case. * There's no need to loop reading ucce multiple times in the ISR, so while adding the call to schedule NAPI which was not there, simplify the event processing into if-else format. * Rx Busy now kicks off NAPI processing, while still being counted as an error. Signed-off-by: Michael Reiss <michael.f.reiss@freescale.com> Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ucc_geth: migrate ucc_geth to phylibKim Phillips
migrate ucc_geth to use the common phylib code. There are several side effects from doing this: o deprecate 'interface' property specification present in some old device tree source files in favour of a split 'max-speed' and 'interface-type' description to appropriately match definitions in include/linux/phy.h. Note that 'interface' property is still honoured if max-speed or interface-type are not present (backward compatible). o compile-time CONFIG_UGETH_HAS_GIGA is eliminated in favour of probe time speed derivation logic. o adjust_link streamlined to only operate on maccfg2 and upsmr.r10m, instead of reapplying static initial values related to the interface-type. o Addition of UEC MDIO of_platform driver requires platform code add 'mdio' type to id list prior to calling of_platform_bus_probe (separate patch). o ucc_struct_init introduced to reduce ucc_geth_startup complexity. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28[PATCH] zd1211rw: Add ID for ZyXEL AG-220Daniel Drake
Tested by Christoph Sager and Tomas Klas zd1211b chip 0586:3412 v4810 high 00-13-49 AL7230B_RF pa0 g---- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: Add AL7230B RF support for ZD1211BDaniel Drake
This patch adds support for some new ZD1211B devices which ship with the AL7230B RF. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: rework band edge patchingDaniel Drake
This change allows RF drivers to provide their own 6M band edge patching implementation, while providing a generic implementation shared by most currently supported RF's. The upcoming ZD1211B/AL7230B code will use this to define its own patching function, which is different from the other RF configurations. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: Remove invalid CR write during ZD1211 phy resetDaniel Drake
The vendor driver only does the CR123 write for non-USB devices (which don't exist on the consumer market) Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] hostap_cs: support ADLINK 345 CFMarcin Juszkiewicz
Add ADLINK 345 CF card into hostap_cs product info: "ADLINK 345 CF" manfid 0xd601, 0x0005 Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] bcm43xx: Change initialization for 2050 radiosLarry Finger
This patch implements the changes in the specifications for 2050radio_init that were recently posted. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28make drivers/net/qla3xxx.c:PHY_DEVICES[] staticAdrian Bunk
On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote: >... > Changes since 2.6.21-rc5-mm2: >... > git-netdev-all.patch >... > git trees >... This patch makes the needlessly global PHY_DEVICES[] static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28S2io: Change of driver maintainersRamkrishna Vepa
- Changed the maintainers for the S2io driver. Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28Patch:replace with time_after in drivers/net/eexpress.cShani
Replacing with time_after in drivers/net/eexpress.c Applies and compiles clean on latest tree.Not tested. Signed-off-by: Shani Moideen <shani.moideen@wipro.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ehea: removing unused functionalityJan-Bernd Themann
This patch includes: - removal of unused fields in structs - ethtool statistics cleanup - removes unsed functionality from send path Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28mv643xx_eth: make eth_port_uc_addr_{get,set}() calls symmetricGabriel Paubert
There is no good reason for the asymmetry in the parameters of eth_port_uc_addr_get() and eth_port_uc_addr_set(). Make them symmetric. Remove some gratuitous block comments while we're here. Signed-off-by: Gabriel Paubert <paubert@iram.es> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28qla3xxx: Bumping driver version number to v2.03.00-k4Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28qla3xxx: Adding support for the Agere PHY (ET1011C)Ron Mercer
This PHY support patch was written by Benjamin Li. Signed-off-by: Benjamin Li <benjamin.li@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28qla3xxx: Add ethtool get_pauseparam for improved bonding support.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28remove unused header file: drivers/net/skfp/h/lnkstat.hRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28baycom_ser_fdx: also allow i/o ports >= 0x1000 and enhanced failure loggingFolkert van Heusden
The baycom_ser_fdx driver did not allow i/o ports >= 0x1000. Now that there are pci cards (with rs232 ports) which use for example 0xb800 this limit should not exists. Also, for non kernel coders find the cause of problems was challenging so I added extra logging. Signed-off-by: Folkert van Heusden <folkert@vanheusden.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28strlcpy is smart enoughJean Delvare
strlcpy already accounts for the trailing zero in its length computation, so there is no need to substract one to the buffer size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <osstklei@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28[PATCH] zd1211rw: Add another ID for Linksys WUSBF54GDaniel Drake
Tested by TiCPU on irc zd1211 chip 13b1:001e v4802 high 00-14-bf AL2230_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: Don't handle broken frames in monitor modeDaniel Drake
Using monitor mode, Johannes Berg observed out that lots of corrupted and otherwise invalid frames were being passed to the host. When in monitor mode we were disabling the hardware filtering here, but this is not how monitor mode should work. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: Mark some data constDaniel Drake
This is a backport of Helge Deller's recent patch for wireless-dev.git Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] Update my email address from jkmaline@cc.hut.fi to j@w1.fiJouni Malinen
After 13 years of use, it looks like my email address is finally going to disappear. While this is likely to drop the amount of incoming spam greatly ;-), it may also affect more appropriate messages, so let's update my email address in various places. In addition, Host AP mailing list is subscribers-only and linux-wireless can also be used for discussing issues related to this driver which is now shown in MAINTAINERS. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28ehea: code cleanupJan-Bernd Themann
This patch includes: - code cleanup related to resource management - extended error data gathering for resource management - removing trailing whitespaces Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28ehea: fix for dynamic lpar supportJan-Bernd Themann
The patch fixes bugs related to the probe / remove adapter functionality (handling of OFDT nodes) Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28Netpoll support for Sibyte MACDeepak Saxena
NETPOLL support for Sibyte MAC Signed-off-by: Manish Lachwani <mlachwani@mvista.com> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28S2io: Remove unused variablesRamkrishna Vepa
- Remove unused variables from s2io_nic structure - Changed the memory failure printk messages to print only in debug mode - Updated the copyright messages (Resending; due to patch being corrupted) Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28MIPSnet: Modernize use platform_device API.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28skge: version 1.11Stephen Hemminger
New version to track changes. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28skge: rearrange fieldsStephen Hemminger
Do some minor rearrangement of data structures to try and optimize cache usage. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28skge: transmit locking improvementsStephen Hemminger
Don't need to lock when processing transmit complete unless queue fills. Modeled after tg3. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28skge: ignore unused error interruptsStephen Hemminger
The following hardware error bits only show up on Genesis chipset and are handled elsewhere, so they can be masked off. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28[PATCH] libertas: use standard kernel macrosTony Breeds
Cleanup drivers/net/wireless/libertas/debugfs.c to use standard kernel macros and functions. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] airo: Make /sys/bus/pci/drivers/airo/{,un}bind workMichal Schmidt
The way airo.c keeps track of all its devices is complicated and buggy as well (del_airo_dev forgets to free the memory add_airo_dev allocates). It's cleaner to use the standard list primitives. While we're at it, it's not necessary to put PCI cards in the list, because the kernel already keeps track of them. We can take advantage of it and use the .remove callback as it was meant to be. This makes /sys/bus/pci/drivers/airo/{,un}bind work. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] airo: Don't check for NULL before kfree()Michal Schmidt
It's unnecessary to check for NULL before calling kfree(). Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] bcm43xx:Eliminate some 'G Mode Enable' magic numbersLarry Finger
In code manipulating the TM State Low register of 802.11 cores, two different magic numbers are used to reference the 'G Mode Enable' bit. One of these, 0x20000000, is clear, but the other, (0x800 << 18), is not. This patch replaces both types with a defined constant. In addition, two bits in the TM State High registers are given definitions to help in following the code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: More device IDsDaniel Drake
ASUS A9Rp Tested by Serge zd1211b chip 0b05:171b v4802 high 00-17-31 AL2230_RF pa0 g-- ZyXEL G-202 Tested by Marcus D. Hanwell zd1211b chip 0586:3410 v4810 high 00-13-49 AL2230_RF pa0 g--- US Robotics USR805423 Tested by Pascal S. de Kloe FCC ID: RAXWN4501H zd1211b chip 0baf:0121 v4810 high 00-14-c1 AL2230_RF pa0 g--N Julien Pinon reports this also comes in AL2230S form Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: Add AL2230S RF supportDaniel Drake
ZD1211 appears to be back in production: a number of new devices have been appearing! Some of them are using new radios. This patch adds support for the next generation AL2230 RF chip which has been spotted in a few new devices. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] zd1211rw: Use compare_ether_addr()Daniel Drake
Suggested by Maxime Austruy, based on mac80211 changes from Stephen Hemminger Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28Rev tulip versionValerie Henson
Rev tulip version... things have changed since 2002! Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28Fix tulip SytemError typoValerie Henson
Fix an annoying typo - SytemError -> SystemError Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 14:49:12 +0000