aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-14w1: decrement slave counter only in ->release() callbackEvgeniy Polyakov
Decrement the slave counter only in ->release() callback instead of both in ->release() and w1 control. Patch is based on debug work and preliminary patch made by Henri Laakso. Henri noticed in debug that this counter becomes negative after w1 slave device is physically removed. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Henri Laakso <henri.laakso@wapice.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-13Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: spidernet MAINTAINERship update sky2: remove check for PCI wakeup setting from BIOS sky2: large memory workaround. fs_enet: check for phydev existence in the ethtool handlers [usb netdev] asix: fix regression r8169: fix missing loop variable increment ip1000: menu location change Fixed a small typo in the loopback driver 3c509: PnP resource management fix netxen: fix byte-swapping in tx and rx netxen: optimize tx handling netxen: stop second phy correctly netxen: update driver version netxen: update MAINTAINERS endianness noise in tulip_core de4x5 fixes xircom_cb endianness fixes rt2x00: Put 802.11 data on 4 byte boundary rt2x00: Corectly initialize rt2500usb MAC rt2x00: Allow rt61 to catch up after a missing tx report
2008-01-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: pnpacpi: print resource shortage message only once PM: ACPI and APM must not be enabled at the same time ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9 ACPICA: fix acpi_serialize hang regression ACPI : Not register gsi for PCI IDE controller in legacy mode ACPI: Reintroduce run time configurable max_cstate for !CPU_IDLE case ACPI: Make sysfs interface in ACPI power optional. ACPI: EC: Enable boot EC before bus_scan increase PNP_MAX_PORT to 40 from 24
2008-01-12Pull bugzilla-9535 into release branchLen Brown
2008-01-12pnpacpi: print resource shortage message only onceLen Brown
pnpacpi: exceeded the max number of IO resources: 40 While this message is a real error and should thus remain KERN_ERR (even a new dmesg line is seen as a regression by some, since it was not printed in 2.6.23...) it is certainly impolite to print this warning 50 times should you happen to have the oddball system with 90 io resources under a device... So print the warning just once. In 2.6.25 we'll get rid of the limits altogether and these warnings will vanish with them. http://bugzilla.kernel.org/show_bug.cgi?id=9535 Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-12sky2: remove check for PCI wakeup setting from BIOSStephen Hemminger
The driver checks status of PCI power management to mark default setting of Wake On Lan. On some systems this works, but often it reports a that WOL is disabled when it isn't. This patch gets rid of that check and just reports the wake on lan status based on the hardware capablity. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12sky2: large memory workaround.Stephen Hemminger
This patch might fix problems with 4G or more of memory. It stops the driver from doing a small optimization for Tx and Rx, and instead always sets the high-page on tx/rx descriptors. Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9725 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12fs_enet: check for phydev existence in the ethtool handlersAnton Vorontsov
Otherwise oops will happen if ethernet device has not been opened: Unable to handle kernel paging request for data at address 0x0000014c Faulting instruction address: 0xc016f7f0 Oops: Kernel access of bad area, sig: 11 [#1] MPC85xx NIP: c016f7f0 LR: c01722a0 CTR: 00000000 REGS: c79ddc70 TRAP: 0300 Not tainted (2.6.24-rc3-g820a386b) MSR: 00029000 <EE,ME> CR: 20004428 XER: 20000000 DEAR: 0000014c, ESR: 00000000 TASK = c789f5e0[999] 'snmpd' THREAD: c79dc000 GPR00: c01aceb8 c79ddd20 c789f5e0 00000000 c79ddd3c 00000000 c79ddd64 00000000 GPR08: 00000000 c7845b60 c79dde3c c01ace80 20004422 200249fc 000002a0 100da728 GPR16: 100c0000 00000000 00000000 00000000 20022078 00000009 200220e0 bfc85558 GPR24: c79ddd3c 00000000 00000000 c02e0e70 c022fc64 ffffffff c7845800 bfc85498 NIP [c016f7f0] phy_ethtool_gset+0x0/0x4c LR [c01722a0] fs_get_settings+0x18/0x28 Call Trace: [c79ddd20] [c79dde38] 0xc79dde38 (unreliable) [c79ddd30] [c01aceb8] dev_ethtool+0x294/0x11ec [c79dde30] [c01aaa44] dev_ioctl+0x454/0x6a8 [c79ddeb0] [c019b9d4] sock_ioctl+0x84/0x230 [c79dded0] [c007ded8] do_ioctl+0x34/0x8c [c79ddee0] [c007dfbc] vfs_ioctl+0x8c/0x41c [c79ddf10] [c007e38c] sys_ioctl+0x40/0x74 [c79ddf40] [c000d4c0] ret_from_syscall+0x0/0x3c Instruction dump: 81630000 800b0030 2f800000 419e0010 7c0803a6 4e800021 7c691b78 80010014 7d234b78 38210010 7c0803a6 4e800020 <8003014c> 7c6b1b78 38600000 90040004 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2008-01-12[usb netdev] asix: fix regressionRuss Dill
51bf2976b55d07f9daae9697a0a3ac9f58abcedc caused a regression in the asix usbnet driver. usb_control_msg returns the number of bytes read on success, not 0. Tested with NETGEAR FA120. Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12r8169: fix missing loop variable incrementFrancois Romieu
Spotted-by: Citizen Lee <citizen_lee@thecus.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12ip1000: menu location changeStephen Hemminger
Move the ip1000 driver into the expected place for gigabit cards in the configuration menu structure. It should be under the gigabit cards, not at the top level. Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12Fixed a small typo in the loopback driverEmil Medve
This is probably a result of the changes from commit 854d836 - [NET]: Dynamically allocate the loopback device, part 2 Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-123c509: PnP resource management fixKrzysztof Helt
In order to release PnP resources a card type must be set to EL3_PNP. Previously, it was never set hence the PnP resources were not released and device was left in incorrect state. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: fix byte-swapping in tx and rxDhananjay Phadke
Here's the reworked patch. This cleans up some unnecessary byte-swapping while setting up tx and interpreting rx desc. The 64 bit rx status data should be converted to host endian format only once and the macros just need to extract bitfields. This saves a spate of interrupts on pseries blades caused by buggy (non) processing rx status ring. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: optimize tx handlingdhananjay@netxen.com
netxen driver allows limited number of threads simultaneously posting skb's in tx ring. If transmit slot is unavailable, driver calls schedule() or loops in xmit_frame(). This patch returns TX_BUSY and lets the stack reschedule the packet if transmit slot is unavailable. Also removes unnecessary check for tx timeout in the driver itself, the network stack does that anyway. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: stop second phy correctlydhananjay@netxen.com
This patch fixes bug that doesn't quiesce second port when interface is brought down, which could lead to unwarranted interrupt during rmmod / ifdown. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: update driver versiondhananjay@netxen.com
Bumping up driver version to 3.4.18, several fixes have gone in since version 3.4.2. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12endianness noise in tulip_coreAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12de4x5 fixesAl Viro
* (trivial) endianness annotations * don't bother with del_timer() from the inside of timer handler itself * disable_ast() really ought to do del_timer_sync(), not del_timer() * clean the timer handling in general. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12xircom_cb endianness fixesAl Viro
* descriptors inside the rx and tx rings are l-e * don't cpu_to_le32() the argument of outl() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (7001): av7110: fix section mismatch V4L/DVB (6999): ivtv: stick to udelay=10 after all
2008-01-11ps3fb: fix deadlock on kexec()Jeremy Kerr
Since the introduction of the acquire_console_sem calls in 0333d83509c7d8496c8965b5ba9bc0c98e83c259, kexecing can cause the kernel to deadlock: ps3fb_shutdown() -> unregister_framebuffer() -> fb_notifier_call_chain(FB_EVENT_FB_UNBIND) -> fbcon_fb_unbind() -> unbind_con_driver() -> bind_con_driver() [ acquires console_sem ] -> fbcon_deinit() -> fbops->fb_release(newinfo, 0) -> ps3fb_release() -> ps3fb_sync() [ acquires console_sem ] This change avoids the deadlock by moving the acquire_console_sem() out of ps3fb_sync(), and puts it into the two other callsites, leaving ps3fb_release() to call ps3fb_sync() without the console semaphore. [Geert] - Corrected call sequence above - ps3fb_release() may be called with and without console_sem held. This is an inconsistency that should be fixed at the fb level, but for now, try to acquire console_sem in ps3fb_release(). I think it's safer to let ps3fb_release() try to acquire console_sem and not refresh the screen if it fails, than to call ps3fb_sync() without holding console_sem, as ps3fb_par may be modified at the same time, causing crashes or lockups. Besides, ps3fb_release() only calls ps3fb_sync() to refresh the screen when display flipping is disabled, which is an uncommon case (except during shutdown/kexec). Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11ps3fb: prevent use after free of fb_infoJeremy Kerr
In ps3fb_shutdown, freeing the framebuffer will cause fb_info (in dev->core.driver_data) to be free()ed, which we potentially access from the ps3fbd kthread. This change frees the framebuffer after stopping the ps3fbd kthread. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: blktrace: kill the unneeded initcall block: fix blktrace timestamps loop: fix bad bio_alloc() nr_iovec request Don't blatt first element of prv in sg_chain()
2008-01-11cache invalidation error for buffered writeMassimo Cirillo
The bug causes corruptions of data read from flash. The original code performs cache invalidation from "adr" to "adr + len" in do_write_buffer(). Since len and adr could be updated in the code before invalidation - it causes improper setting of cache invalidation regions. Signed-off-by: Massimo Cirillo <maxcir@gmail.com> Signed-off-by: Giuseppe D'Eliseo <giuseppedeliseo@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woohouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11IDE: terminate ACPI DMI listJeff Garzik
Fix oops reported by Trond. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11Pull bugzilla-9683 into release branchLen Brown
2008-01-11Pull bugzilla-9627 into release branchLen Brown
2008-01-11Pull bugzilla-9494 into release branchLen Brown
2008-01-11Pull bugzilla-9194 into release branchLen Brown
2008-01-11PM: ACPI and APM must not be enabled at the same timeLen Brown
ACPI and APM used "pm_active" to guarantee that they would not be simultaneously active. But pm_active was recently moved under CONFIG_PM_LEGACY, so that without CONFIG_PM_LEGACY, pm_active became a NOP -- allowing ACPI and APM to both be simultaneously enabled. This caused unpredictable results, including boot hangs. Further, the code under CONFIG_PM_LEGACY is scheduled for removal. So replace pm_active with pm_flags. pm_flags depends only on CONFIG_PM, which is present for both CONFIG_APM and CONFIG_ACPI. http://bugzilla.kernel.org/show_bug.cgi?id=9194 Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2008-01-11Pull bugzilla-8973 into release branchLen Brown
2008-01-11Pull bugzilla-8171 into release branchLen Brown
2008-01-11Pull bugzilla-5637 into release branchLen Brown
2008-01-11V4L/DVB (7001): av7110: fix section mismatchRandy Dunlap
Fix driver data name to match whitelist of acceptable names that contain pointers init data so that section mismatch warning is placated. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-11V4L/DVB (6999): ivtv: stick to udelay=10 after allHans Verkuil
Using an udelay of 5 seems to result in problems for several people. For now abandon the udelay value of 5 and stick to 10, even though this will mean a longer load time of the cx2584x firmware. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-11loop: fix bad bio_alloc() nr_iovec requestJens Axboe
Don't allocate room for an iovec when it is not needed. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9Zhao Yakui
It is important that these resources be reserved to avoid conflicts with well known ACPI registers. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-10ACPICA: fix acpi_serialize hang regressionBob Moore
http://bugzilla.kernel.org/show_bug.cgi?id=8171 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-10ACPI : Not register gsi for PCI IDE controller in legacy modeAlan Cox
When PCI IDE controller works in legacy mode and no PRT entry is found in ACPI PRT table, OSPM will neither read the irq number from the IDE PCI configuration space nor call the function of acpi_register_gsi to register gsi. http://bugzilla.kernel.org/show_bug.cgi?id=5637 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Fix alignment fault in aes_crypt_copy
2008-01-10Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata and starting/stopping ATAPI floppy devices sata_sil24: prevent hba lockup when pass-through ATA commands are used Update kernel parameter document for libata DMA mode setting knobs. libata: don't normalize UNKNOWN to NONE after reset libata-pmp: propagate timeout to host link libata-pmp: 4726 hates SRST pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversion pata_pdc202xx_old: Further fixups libata-sff: PCI IRQ handling fix sata_qstor: use hardreset instead of softreset
2008-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: trm290: do hook dma_host_{on,off} methods (take 2) ide: fix cable detection for SATA bridges ide: workaround suspend bug for ACPI IDE
2008-01-10libata and starting/stopping ATAPI floppy devicesOndrej Zary
Prevent libata from starting/stopping non-ATA devices (like ATAPI floppy drives) as they don't seem to like it: sd 1:0:1:0: [sdb] Starting disk ata2.01: configured for PIO2 sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:1:0: [sdb] Sense Key : 0x2 [current] sd 1:0:1:0: [sdb] ASC=0x3a ASCQ=0x0 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-10trm290: do hook dma_host_{on,off} methods (take 2)Sergei Shtylyov
Using default methods caused the chip's DMA PRD count registers, inadvertently starting DMA! While fixing it, also do: - get rid of the 'ide_' prefixes in several functions for which the prefix in the method's name has been 'ide_' ectomized already; - align the code hooking the IDE DMA methods in init_hwif_trm290()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-10ide: fix cable detection for SATA bridgesGeorge Kibardin
Signed-off-by: George Kibardin <george-kibardin@yandex.ru> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-10ide: workaround suspend bug for ACPI IDEShaohua Li
http://bugzilla.kernel.org/show_bug.cgi?id=9673 ACPI _PS3 cause S4 breaks in the second attempt. The system has a _PS3 method for IDE, which will call into SMM mode. Currently we haven't clue why just the second attempt fails, as it's totally in BIOS code, so blacklist the system so far for 2.6.24. A possible suspect is ACPI NVS isn't save/restore, we will revisit the bug after linux does ACPI NVS save/restore. Bart: - fix scripts/checkpatch.pl complaints - const-ify ide_acpi_dmi_table[] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Reported-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-10sata_sil24: prevent hba lockup when pass-through ATA commands are usedGwendal Grignou
Fix commands timeout with Sil3124/3132 based HBA when pass-through ATA commands [where ATA_QCFLAG_RESULT_TF is set] are used while other commands are active on other devices connected to the same port with a Port Multiplier. Due to a hardware bug, these commands must be sent alone, like ATAPI commands. Signed-off-by: Gwendal Grignou <gwendal@google.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata: don't normalize UNKNOWN to NONE after resetTejun Heo
After non-classifying reset, ehc->classes[] could contain ATA_DEV_UNKNOWN which used to be normalized to ATA_DEV_NONE for consistency. However, this causes unfortunate side effect for drivers which have non-classifying hardresets (e.g. sata_nv) by making hardreset report ATA_DEV_NONE for non-classifying resets and thus makes EH believe that the port is unoccupied and recovery can be skipped. The end result is that after a device is swapped with another one, the new device isn't attached after the old one is detached. This patch makes ata_eh_reset() not normalize UNKNOWN to NONE after non-classifying resets. This fixes the above problem. As UNKNOWN and NONE are handled differently by only EH hotplug logic, this doesn't cause other behavior changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 19:37:52 +0000