aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-10-03[PATCH] rivafb: use constants instead of magic valuesGuido Guenther
use (MIN/MAX)_LEVEL and FB_(UN)BLANK instead of the values they are defined to Signed-off-by: Guido Guenther <agx@sigxcpu.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] au1100fb: Add option to enable/disable the cursorRodolfo Giometti
- add cursor enable/disable, very useful if you wish a full screen boot logo. Cursor can be disabled from kernel command line: video=au1100fb:nocursor,panel:Toppoly_TD035STED4 or from sysfs interface: echo 1 > /sys/module/au1100fb/parameters/nocursor - fix up some wrong indentation issues. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide-cs (CompactFlash) driver, rm irq warningDavid Brownell
Git rid of the runtime warning about pcmcia not supporting exclusive IRQs, so "the driver needs updating". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE: more pci_find cleanupAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] Allow ide_generic_all to be used modular and built inPatrick Jefferson
Allow ide/pci/generic to claim chipsets as a a module or when built-in. It requires using "all_generic_ide" as a boot option. Signed-off-by: Patrick Jefferson <henj@hp.com> Acked-by: Alan Cox <alan@redhat.com> Closes-Bug: 7017 Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: Fix crash on repeated resetAlan Cox
Michal Miroslaw reported a problem (bugzilla #7023) where a user initiated reset while the IDE layer was already resetting the channel caused a crash, and provided a rough fix. This is a slightly cleaner version of the fix which tracks the reset state and blocks further reset requests while a reset is in progress. Note this is not a security issue - random end users can't access the ioctl in question anyway. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] CONFIG_PM=n slim: drivers/ide/pci/sc1200.cAlexey Dobriyan
Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] PCMCIA: Add few IDs into ide-csMarcin Juszkiewicz
Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: reprogram disk pio timings on resumeJason Lunz
Add a step to the IDE PM state machine that reprograms disk PIO timings as the first step on resume. This prevents ide deadlock on resume-from-ram on my nforce3-based laptop. An earlier implementation was written entirely within the amd74xx ide driver, but Alan helpfully pointed out that this is the correct thing to do globally. Still, I'm only calling hwif->tuneproc() for disks, based on two things: - The existing state machine is already passed over for non-disk drives - Previous testing on my laptop shows that the hangs are related only to the disk - suspend/resume from a livecd showed that there's no need for this on the cdrom. Signed-off-by: Jason Lunz <lunz@falooley.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brad Campbell <brad@wasp.net.au> Cc: David Brownell <david-b@pacbell.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: remove dma_base2 field from ide_hwif_tSergei Shtylyov
Remove dma_base2 field from ide_hwif_t as it's used only in 2 drivers and without great need. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: John Keller <jpk@sgi.com> Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] drivers/ide/: cleanupsAdrian Bunk
- setup-pci.c: remove the unused ide_pci_unregister_driver() - ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list) Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE core: driver layer error checkingRandy Dunlap
Check driver layer return values in IDE core. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: backport piix fixes from libata into the legacy driverAlan Cox
There are three flags being set by default by the PIIX driver for speeds > PIO 1, and one not being cleared properly on fallback to PIO0. The most important one is the prefetch/post write control which only works for ATA and can do bad things with ATAPI. The patch does its best to set the flags correctly for drivers/ide. Its not 100% perfect but its closer than the original. 100% perfect requires proper IORDY handling but this isn't critical (and its not right in libata either .. yet) Sergei Shtylyov <sshtylyov@ru.mvista.com> said: > + { 0, 0 }, > + { 0, 0 }, > + { 1, 0 }, > + { 2, 1 }, > + { 2, 3 }, }; > > pio = ide_get_best_pio_mode(drive, pio, 5, NULL); BTW, there's quite obvious error here which leads to access outside of timings[] if somebody passes PIO mode 5 (or autotuning code finds out that drive supports PIO mode 5). Could have been fixed while at it... Those drives should be rare, though... > + } > master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8); > } > pci_write_config_word(dev, master_port, master_data); Actually, there's one more serious issue with piix_tune_drive() -- it doesn't actually set the drive's own transfer mode. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide: fix revision comparison in ide_in_drive_listKirill Smelkov
Fix ide_in_drive_list: drive_table->id_firmware should be searched *in* id->fw_rev, not vice versa. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] Enable cdrom dma access with pdc20265_oldTobias Oed
This patch allows me to use dma with my cd/dvd attached to my on board pdc20265 ide controller Alan sayeth: Looks sane. Would be nice to know if there is any documentation supporting this hack being safe but the logic makes sense. The LBA48 case faces the same problem - the state machine gets confused about the transfer length and needs kicking Signed-off-by: Tobias Oed <tobiasoed@hotmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jens Axboe <axboe@suse.de> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ide_dma_speed() fixesSergei Shtylyov
ide_dma_speed() fails to actually honor the IDE drivers' mode support masks) because of the bogus checks -- thus, selecting the DMA transfer mode that the driver explicitly refuses to support is possible. Additionally, there is no check for validity of the UltraDMA mode data in the drive ID, and the function is misdocumented. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] Make number of IDE interfaces configurableMatt Mackall
Make IDE_HWIFS configurable if EMBEDDED This lets us lop as much as 16k off an x86 build. It's a little ugly, but it's dead simple. Note the fix for HWIFS < 2. Sizing interfaces dynamically unfortunately turns out to be pretty major surgery. add/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182) function old new delta ide_hwifs 16920 1692 -15228 init_irq 1113 750 -363 ideprobe_init 283 138 -145 ide_pci_setup_ports 1329 1193 -136 save_match 85 - -85 ide_register_hw_with_fixup 367 287 -80 ide_setup 1364 1308 -56 is_chipset_set 40 4 -36 create_proc_ide_interfaces 225 205 -20 init_ide_data 84 67 -17 ide_probe_for_cmd640x 1198 1183 -15 ide_unregister 1452 1451 -1 Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE error handling fixesHua Zhong
In 2.6.15.1 I encountered some IDE crashes when unplugging IDE cables to emulate disk errors. Below is a patch against 2.6.16 which I think still applies. 1. The first BUG_ON could trigger when a PREFLUSH IO fails (it would fail the original barrier request which hasn't been marked REQ_STARTED yet). 2. the rq could have been dequeued already (same as 1). 3. HWGROUP(drive)->rq could be NULL because of the ide_error() several lines earlier. Signed-off-by: Hua Zhong <hzhong@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE: always release DMA engineSergei Shtylylov
Release the DMA engine for the custom mapping IDE drivers also (for example, siimage.c does allocate it in both I/O-mapped and custom-mapped modes). Remove useless code from the error path of ide_allocate_dma_engine(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IDE: claim extra DMA ports regardless of channelSergei Shtylylov
- Claim extra DMA I/O ports regardless of what IDE channels are present/enabled. - Remove extra ports handling from ide_mapped_mmio_dma() since it's not applicable to the custom-mapping IDE drivers. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] non-libata driver for Jmicron devicesAlan Cox
Less functional than libata this just uses the merged interface provided for dumb legacy OS's. This is basically a bridge for people not yet ready to use libata for some reason or another. Port visibility is entirely dependant on the BIOS setup. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] pata_hpt366: fix typoOGAWA Hirofumi
switch(reg1 & 0x700) { case 5: info_hpt366.private_data = &hpt366_40; break; case 9: info_hpt366.private_data = &hpt366_25; break; default: info_hpt366.private_data = &hpt366_33; break; } The above runs always default part. It should be "(reg1 & 0x700) >> 8". Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] IPMI: allow user to override the kernel IPMI daemon enableCorey Minyard
After the previous patch to disable the kernel IPMI daemon if interrupts were available, the issue of broken hardware was raised, and a reasonable request to add an override was mode. So here it is. Allow the user to force the kernel ipmi daemon on or off. This way, hardware with broken interrupts or users that are not concerned with performance can turn it on or off to their liking. [akpm@osdl.org: save 4 bytes in vmlinux] Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] restore parport_pc probing on powermacOlaf Hering
The last change for partport_pc did fix the common case for all PowerMacs, but it broke the case for PCI multiport IO cards. In fact, the config option CONFIG_PARPORT_PC_SUPERIO=y lead to a hard crash when cups probed the parport driver. It enables the winbond and smsc probing. Remove the PARPORT_BASE check again, parport_pc_find_nonpci_ports() will take care of it. All powerpc configs should have CONFIG_PARPORT_PC_SUPERIO=n, the code did not find anything on the chrp boards we tested it on. Tested on a G4/466 with a PCI card: 0001:10:13.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550]) Subsystem: Timedia Technology Co Ltd Unknown device 5079 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 53 Region 0: I/O ports at f2000800 [size=32] Region 2: I/O ports at f2000870 [size=8] Region 3: I/O ports at f2000860 [size=8] Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ISDN warning fixesAlan Cox
Clean up warnings in drivers/isdn by using long not int for the values where we pass void * and cast to integer types. The code is ok (ok passing the stuff this way isn't pretty but the code is valid). In all the cases I checked out the right thing happens anyway but this removes all the warnings. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] drivers/char/ip2: kill unused code, labelJeff Garzik
Kill warning: drivers/char/ip2/ip2main.c: In function ‘ip2_loadmain’: drivers/char/ip2/ip2main.c:782: warning: label ‘out_class’ defined but not used This driver's initialization (and cleanup of errors during init) is extremely convoluted, and could stand to be transformed into the standard unwinding-goto style of error cleanup. Signed-off-by: Jeff Garzik <jeff@garzik.org> Acked-by: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03[PATCH] ipmi: fix uninitialized data bugJeff Garzik
gcc issues the following warning: drivers/char/ipmi/ipmi_si_intf.c: In function ‘init_ipmi_si’: drivers/char/ipmi/ipmi_si_intf.c:1729: warning: ‘data.irq’ may be used uninitialized in this function This is indeed a bug. data.irq is completely uninitialized in some code paths. Worse than that, data from a previous decode_dmi() run can easily leak through successive calls. Signed-off-by: Jeff Garzik <jeff@garzik.org> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02[PATCH] hp100: fix conditional compilation messJeff Garzik
The previous hp100 changeset attempted to kill warnings, but was only tested on !CONFIG_ISA platforms. The correct conditional compilation setup involves tested CONFIG_ISA rather than just MODULE. Fixes link on CONFIG_ISA platforms (i386) in current -git. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Tweak trace message format IB/ehca: Fix device registration IB/ipath: Fix RDMA reads RDMA/cma: Optimize error handling RDMA/cma: Eliminate unnecessary remove_list RDMA/cma: Set status correctly on route resolution error RDMA/cma: Fix device removal race RDMA/cma: Fix leak of cm_ids in case of failures
2006-10-02IB/ehca: Tweak trace message formatHoang-Nam Nguyen
Add an extra space to make things more readable. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02IB/ehca: Fix device registrationHoang-Nam Nguyen
Move the call to ib_register_device() later, since a device should not be registered until it is completely read to be used. This fixes crashes that occur if an upper-layer driver such as IPoIB is loaded before the ehca module. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02IB/ipath: Fix RDMA readsRalph Campbell
The PSN used to generate the request following a RDMA read was incorrect and some state booking wasn't maintained correctly. This patch fixes that. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
2006-10-02RDMA/cma: Optimize error handlingKrishna Kumar
Reorganize code relating to cma_get_net_info() and rdam_create_id() to optimize error case handling (no need to alloc memory/etc. as part of rdma_create_id() if input parameters are wrong). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Eliminate unnecessary remove_listKrishna Kumar
Eliminate remove_list by using list_del_init() instead during device removal handling. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Set status correctly on route resolution errorSean Hefty
On reporting a route error, also include the status for the error, rather than indicating a status of 0 when an error has occurred. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Fix device removal raceKrishna Kumar
The race is as follows: A process : cma_process_remove() calls cma_remove_id_dev(), which sets id state to CMA_DEVICE_REMOVAL and calls wait_event(dev_remove). B process : cma_req_handler() had incremented dev_remove, and calls cma_acquire_ib_dev() and on failure calls cma_release_remove(), which does a wake_up of cma_process_remove(). Then cma_req_handler() calls rdma_destroy_id(); A Process : cma_remove_id_dev() gets woken and checks the state of id, and since it is still (wrongly) CMA_DEVICE_REMOVAL, it calls notify_user(id) and if that fails, the caller - cma_process_remove() calls rdma_destroy_id(id). Two processes can call rdma_destroy_id(), resulting in one de-referencing kfreed id_priv. Fix is for process B to set CMA_DESTROYING in cma_req_handler() so that process A will return instead of doing a rdma_destroy_id(). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02RDMA/cma: Fix leak of cm_ids in case of failuresKrishna Kumar
cma_connect_ib() and cma_connect_iw() leak cm_id's in failure cases. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02[WATCHDOG] improve machzwd detectionDave Jones
On a machine with no machzwd, loading the module prints out.. machzwd: MachZ ZF-Logic Watchdog driver initializing. 0xffff machzwd: Watchdog using action = RESET - the 0xffff printk is unnecessary - 0xffff seems to be 'hardware not present' - fix CodingStyle. (This driver could use some more work here) Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-10-02[WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl()Samuel Tardieu
Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands. ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead. Signed-off-by: Samuel Tardieu <sam@rfc1149.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-10-02[WATCHDOG] s3c24XX nowayoutBen Dooks
If the driver is not configured for `no way out`, then the open method should not automatically allow the setting of allow_close to CLOSE_STATE_ALLOW. The setting of allow_close nullifies the use of the magic close via the write path. It means that in the default state, the watchdog will shut-down even if the magic close has not been issued. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2006-10-02[WATCHDOG] pnx4008: add cpu_relax()Vitaly Wool
Added cpu_relax as suggested by Alan Cox. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-02[WATCHDOG] pnx4008_wdt.c - spinlock fixes.Wim Van Sebroeck
Add io spinlocks to prevent possible race conditions between start and stop operations that are issued from different child processes where the master process opened /dev/watchdog. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-02[WATCHDOG] pnx4008_wdt.c - remove patchWim Van Sebroeck
Change remove code so that we first detach the driver from userspace, then clean up the clock and then clean up the memory we allocated. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-02[WATCHDOG] pnx4008_wdt.c - nowayout patchWim Van Sebroeck
Change nowayout to: WATCHDOG_NOWAYOUT as defined in include/linux/watchdog.h . Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-02[WATCHDOG] pnx4008: add watchdog supportVitaly Wool
Add watchdog support for Philips PNX4008 ARM board inlined. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-02[WATCHDOG] i8xx_tco remove pci_find_device.Jiri Slaby
Use refcounting for pci device obtaining. Use PCI_DEVICE macro. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Andrew Morton <akpm@osdl.org>
2006-10-02[WATCHDOG] alim remove pci_find_deviceJiri Slaby
Convert pci_find_device to pci_get_device + pci_dev_put in alim watchdog cards' drivers (refcounting). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-10-02Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (37 commits) [netdrvr] hp100: encapsulate all non-module code drivers/net/wireless/{airo,ipw2100}: fix error handling bugs [netdrvr] phy: Fix bugs in error handling [PATCH] spidernet: Use pci_dma_mapping_error() [PATCH] sky2: version 1.9 [PATCH] sky2: fragmented receive for large MTU [PATCH] sky2: use netif_tx_lock instead of LLTX [PATCH] sky2: incremental transmit completion [PATCH] sky2: name irq after eth for irqbalance [PATCH] sky2: workarounds for some 88e806x chips [PATCH] sky2: use standard pci register capabilties for error register [PATCH] sky2: gigabit full duplex negotiation e100, e1000, ixgb: increment version numbers ixgb: convert to netdev_priv(netdev) ixgb: combine more rx descriptors to improve performance e1000: possible memory leak in e1000_set_ringparam e1000: Janitor: Use #defined values for literals e1000: don't strip vlan ID if 8021q claims it e1000: rework polarity, NVM, eeprom code and fixes. e1000: driver state fixes (race fix) ...
2006-10-02Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [MTD] Cleanup of 'ioremap balanced with iounmap for drivers/mtd subsystem' [MTD] fix nftl_write warning [MTD] fix printk warning [MTD ONENAND] Check OneNAND lock scheme & all block unlock command support [MTD ONENAND] Remove unused MTD_ONENAND_SYNC_READ configuration [MTD ONENAND] Fix OneNAND probe [MTD NAND] Provide prototype for newly-exported nand_wait_ready() [MTD] Remove #ifndef __KERNEL__ hack in <mtd/mtd-abi.h> [MTD NAND] Allow override of page read and write functions. [MTD NAND] Allocate chip->buffers separately to allow it to be overridden [MTD NAND] Split nand_scan() into two parts; allow board driver to intervene [MTD NAND] Export nand_wait_ready() for use by board drivers
2006-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: wistron - add support for Acer TravelMate 2424NWXCi Input: wistron - fix setting up special buttons Input: add KEY_BLUETOOTH and KEY_WLAN definitions Input: add new BUS_VIRTUAL bus type Input: add driver for stowaway serial keyboards Input: make input_register_handler() return error codes Input: remove cruft that was needed for transition to sysfs Input: fix input module refcounting Input: constify input core Input: libps2 - rearrange exports Input: atkbd - support Microsoft Natural Elite Pro keyboards Input: i8042 - disable MUX mode on Toshiba Equium A110 Input: i8042 - get rid of polling timer Input: send key up events at disconnect Input: constify psmouse driver Input: i8042 - add Amoi to the MUX blacklist Input: logips2pp - add sugnature 56 (Cordless MouseMan Wheel), cleanup Input: add driver for Touchwin serial touchscreens Input: add driver for Touchright serial touchscreens Input: add driver for Penmount serial touchscreens ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 05:08:29 +0000