aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-08-01[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_listJames Smart
Cleans up a lot of bad behaviors that have been in this area a while Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Error messages and debugfs updatesJames Smart
Error messages and debugfs updates: - Fix up GID_FT error messages - Enhance debugfs with slow_ring_trace, dumpslim and nodelist information - Add log type (and messages) for vport state changes - Enhance log messages when retries ELS fail Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] initialize shost_data to zeroFUJITA Tomonori
It's better to initialize host->shost_data to zero like target->starget_data and device->sdev_data. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] mptsas: add SMP passthrough support via bsgFUJITA Tomonori
This patch adds support for SAS Management Protocol (SMP) passthrough support via bsg. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] ESP: Revert ESP_BUS_TIMEOUT back down to 250David Miller
This reverts d73f5222a618a91452d41c29f5996ce3d9c63673 The bug that made us increase ESP_BUS_TIMEOUT to 275 turned out to be a memset bug on 32-bit sparc. It is better to put this back at the correct timeout value than to leave it increased when there is no reason for doing so. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] dpt_i2o: convert to SCSI hotplug modelMatthew Wilcox
- Delete refereces to HOSTS_C - Switch to module_init/module_exit instead of detect/release - Don't pass around the host template and rename it to adpt_template - Switch from scsi_register/scsi_unregister to scsi_host_alloc, scsi_add_host, scsi_scan_host and scsi_host_put. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] qla2xxx: fix panic caused by previous patchSeokmann Ju
- this patch will fix a panic caused by omitted memory allocation for the nvram. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] aic7xxx: cap maxsync according to correct card limitsJames Bottomley
Not doing this can cause cards less than u160 capable to send out PPR offers to devices they can't then deliver on ... causing some devices to get a bit confused. Fix by capping the start syncrate at the appropriate level according to the card capabilities. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] st: Use mutex instead of semaphoreMatthias Kaehlcke
The SCSI Tape driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] mpt fusion: make logging a global sysfs parameterJames Bottomley
Wire up the mpt_debug_level module parameter so you can write to the /sys/module/mptbase/parameters/mpt_debug_level and have it take effect in every ioc. Acked-by: "Moore, Eric" <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] libsas: fix build dependencies on libataJames Bottomley
If you have the libsas with ATA support, it needs libata to function. The problem is that if you compile in libsas, you can't build libata as a module (however, vice versa you can). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] gdth: remove redundant PCI stuffJeff Garzik
This patch * removes struct members that duplicate pci_dev members * replaces ha->stype usage with ha->pdev->device usage where feasible Signed-off-by: Jeff Garzik <jeff@garzik.org> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Achim Leubner <Achim_Leubner@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] ibmvscsi: use shost_privFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] ibmvscsi: remove unnecessary map_sg checkFUJITA Tomonori
No need to check use_sg since sg_tablesize is set appropriately in the scsi host template. Brian King's patch (2a7309372fe56ae46c499b772d811ad31c501dd9) did this cleanup but the data buffer accessors patch (written before the patch and merged after it) restored the check. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31[SCSI] zfcp: convert to use the data buffer accessorsFUJITA Tomonori
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-30Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23: sh: Fix fs.h removal from mm.h regressions. sh: fix get_wchan() for SH kernels without framepointers sh: arch/sh/boot - fix shell usage rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts. sh: remove support for sh7300 and solution engine 7300 sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies. sh: Kill off virt_to_bus()/bus_to_virt(). sh: sh-sci - fix SH7708 support sh: Restrict DSP support to specific CPUs. sh: Silence sq compile warning on sh4 nommu. sh: Kill the rest of the SE73180 cruft. sh: remove support for sh73180 and solution engine 73180 sh: remove old broken pint code sh: Reclaim beginning of P3 space for vmalloc area. sh: Fix Dreamcast DMA issues. sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
2007-07-30Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Fix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia/nmclan_cs.c PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe S2io: Increment received packet count correctly S2io: Fix crash when resetting adapter S2io: Mask spurious interrupts S2IO: Implementing review comments from old patches S2IO: Checking for the return value of pci map function S2IO: Removing MSI support from driver S2IO: Removing 3 buffer mode support from the driver netxen: drop redudant spinlock netxen: Fix interrupt handling for multiport adapters netxen: re-init station address after h/w init tulip: Remove tulip maintainer forcedeth: mac address correct gfar: Fix modpost warning lib8390: comment on locking by Alan Cox Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c
2007-07-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Workaround problem of errormask register being overwritten IB/ipath: Fix some issues with buffer cancel and sendctrl register update IB/ipath: Use faster put_tid_2 routine after initialization IB/ipath: Remove unsafe fastrcvint code from interrupt handler IB/ehca: Move extern declarations from .c files to .h files IB/mlx4: Whitespace fix IB/ehca: Fix include order to better match kernel style mlx4_core: Remove kfree() in mlx4_mr_alloc() error flow RDMA/amso1100: Initialize the wait_queue_head_t in the c2_qp structure
2007-07-30Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: modules: better error messages when modules fail to load due to a sysfs problem. kobject: update documentation kset: kernel-doc cleanups driver core: revert "device" link creation check stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface Fix Doc/sysfs-rules typos kernel-doc fixes for PCI and drivers/base/ kobject: put kobject_actions in kobject.h kobject: fix link error when CONFIG_HOTPLUG is disabled HOWTO: sync Japanese HOWTO HOWTO: adjust translation header of Japanese stable_api_nonsense.txt
2007-07-30Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: "sparse" cleanups for usb gadgets usb-serial: Fix edgeport regression on non-EPiC devices USB: more pxa2xx_udc dead code removal USB: NIKON D50 is an unusual device USB: drivers/usb/serial/sierra.c: make 3 functions static USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0 USB: mct_u232: Convert to proper speed handling API digi_acceleport: Drag the driver kicking and screaming into coding style cp2101: Remove broken termios optimisation, use proper speed API USB: Fix a bug in usb_start_wait_urb USB: fix scatterlist PIO case (IOMMU) USB: fix usb_serial_suspend(): buggy code USB: yet another quirky device USB: Add CanonScan LiDE30 to the quirk list USB: even more quirks USB: usb.h kernel-doc additions USB: more quirky devices USB: Don't let usb-storage steal Blackberry Pearl USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig
2007-07-30driver core: revert "device" link creation checkCornelia Huck
driver core: revert "device" link creation check Commit 2ee97caf0a6602f749ddbfdb1449e383e1212707 introduced an extra check on when to create the "device" symlink. Unfortunately, this breaks input, so let's revert to the old behaviour. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30kernel-doc fixes for PCI and drivers/base/Randy Dunlap
Fix undocumented function parameters in PCI and drivers/base. Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq' Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30kobject: put kobject_actions in kobject.hGreg Kroah-Hartman
This prevents the extern declaration in the driver core. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: "sparse" cleanups for usb gadgetsDavid Brownell
This removes complaints about the gadget stack which are generated by the currrent "sparse": it doesn't like the fact that zero is the null pointer. (Last I checked, C guarantees that's correct ...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30usb-serial: Fix edgeport regression on non-EPiC devicesAdam Kropelin
Fix serious regression on non-EPiC edgeport usb-serial devices. Baud rate and MCR/LCR registers are not being written on these models due to apparent copy-n-paste errors introduced with EPiC support. Failure reported by Nick Pasich <Nick@NickAndBarb.net>. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: more pxa2xx_udc dead code removalDavid Brownell
Remove some more dead code from the pxa2xx_udc driver: support for a no-longer-undocumented hardware "test mode". Newer chips made this the default, evidently as the best workaround for deep silicon bugs. The interest was that this seemed to be the only way to kick in the (documented!) double buffering capability. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: NIKON D50 is an unusual deviceMilinevsky Dmitry
This short patch allows NIKON D50 to be mounted as UMS[unusual device] on Linux niam 2.6.22-rc7-cfs-v18 #2 PREEMPT Tue Jul 3 22:35:53 EEST 2007 i686 Intel(R) Celeron(R) M processor 1.50GHz GenuineIntel GNU/Linux, some previous kernels... lsusb -v Bus 001 Device 006: ID 04b0:0409 Nikon Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04b0 Nikon Corp. idProduct 0x0409 bcdDevice 1.00 iManufacturer 1 NIKON iProduct 2 NIKON DSC D50 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by: Milinevsky Dmitry <niam.niam@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <caglar@pardus.org.tr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: drivers/usb/serial/sierra.c: make 3 functions staticAdrian Bunk
This patch makes three needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: fix BUG: sleeping function called from invalid context at ↵Oliver Neukum
/home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0 Clearly there's a bug in drivers/usb/serial/usb-serial.c:usb_serial_put(). It shouldn't call kref_put() while holding a spinlock. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: mct_u232: Convert to proper speed handling APIAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30digi_acceleport: Drag the driver kicking and screaming into coding styleAlan Cox
- The outbreak of acute bracketitus has been cured - The belief that brackets should have spaces everywhere likewise - Various other coding style tweaks - Use baud rates not Bfoo in the speed setup switch Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30cp2101: Remove broken termios optimisation, use proper speed APIAlan Cox
I've also enabled the commented out support for 7200, 14400, 55854, 127117 and 3686400 baud as you can now set such rates in the kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: Fix a bug in usb_start_wait_urbAlan Stern
This patch (as941) fixes a bug recently added to the USB synchronous API. The status of a completed URB must be preserved separately across a completion callback. Also, the actual_length value isn't available until after the URB has fully completed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: fix scatterlist PIO case (IOMMU)David Brownell
Update the scatterlist logic so that PIO options are also disabled when an IOMMU may have coalesced pages during dma_map_sg() ... it's not just HIGHMEM that can make trouble supporting both PIO and DMA based host controller drivers. There also seems to be a cross-arch issue here, with 64bit powerpc not using an IOMMU define ... and its IOMMU_VMERGE config can always be overridden on the kernel command line. So this is better, but still imperfect. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: fix usb_serial_suspend(): buggy codeOliver Neukum
Am Montag 23 Juli 2007 schrieb Adrian Bunk: > Commit ec22559e0b7a05283a3413bda5d177e42c950e23 added the following > function to drivers/usb/serial/usb-serial.c: > [..] > > The Coverity checker spotted the inconsequent NULL checking for "serial". > > Looking at the code it also doesn't seem to have been intended to always > return 0. Coverity is right. The check for NULL is wrongly done and the error return is lost. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: yet another quirky deviceOliver Neukum
another quirky scanner. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: Add CanonScan LiDE30 to the quirk listJohann Felix Soden
This patch adds CanoScan N1240U/LiDE30 (Scanner) to the list of quirky USB devices. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: even more quirksOliver Neukum
The number of quirky devices seems to be large. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: more quirky devicesOliver Neukum
our list of devices which cannot be suspended keeps growing. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: Don't let usb-storage steal Blackberry PearlJeremy Katz
The Blackberry Pearl can run in two modes; a usb-storage only mode and a mode that allows access via mass storage and to its database. The berry_charge module will set the device to dual mode and thus we should ignore its native mode if that module is built Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected ↵Juergen Beisert
in Kconfig Trivial patch to build the IOWARRIOR when it is selected in Kconfig. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30IB/ipath: Workaround problem of errormask register being overwrittenDave Olson
On some system hardware, we are seeing moderately common cases of the chip errormask register being overwritten due to a chip bug in iba6120 that is triggered by a vendor-specific PCIe broadcast message. This patch merely checks periodically, and corrects it if needed (the overwrite can cause us to not get error and hardware error interrupts). Also, make dd->ipath_errormask the one, true canonical source for kr_errormask, and remove references to ipath_ignorederrs as it is currently unused. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-30IB/ipath: Fix some issues with buffer cancel and sendctrl register updateDave Olson
There was confused use of INFINIPATH_S_PIOBUFAVAILUPD (value) and IPATH_S_PIOBUFAVAILUPD (bit position). Also, some callers of ipath_cancel_sends() need kr_sendctrl restored, and some want to do it later. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-30IB/ipath: Use faster put_tid_2 routine after initializationDave Olson
At one time the ipath_minrev field was initialized prior to the ipath_init_iba6120_funcs call, but that is no longer the case, so the slower put_tid routine was always being used. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-30IB/ipath: Remove unsafe fastrcvint code from interrupt handlerDave Olson
The fastrcvint code's purpose was to avoid reading the interrupt status if kernel packets were in the receive queue (to reduce overhead). Because intstatus was not read, we could miss the error interrupt bit indicating freeze mode, since it only delivers a single interrupt, even if still pending after intclear is written. This patch removes that unsafe optimization. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-30Fix a potential NULL pointer dereference in mace_interrupt() in ↵Micah Gruber
drivers/net/pcmcia/nmclan_cs.c This patch fixes a potential null dereference bug where we dereference DEV before a null check. This patch simply moves the dereferencing after the null check. Signed-off-by: Micah Gruber <micah.gruber@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safeKomuro
protect smc_start_xmit, smc_interrupt and media_check by spin_lock. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30S2io: Increment received packet count correctlyRamkrishna Vepa
- Fix to increment the received packet count correctly. (Resending; Removed HTML sections in the patch) Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30S2io: Fix crash when resetting adapterRamkrishna Vepa
- Removed the call to pci_set_power_state to reset the adapter as it was resulting in system crash on some platforms. (Resending; Removed HTML sections in the patch) Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30S2io: Mask spurious interruptsRamkrishna Vepa
- Mask single and double bit ETQ ecc errors to inhibit spurious interrupts. (Resending; Removed HTML sections in the patch) Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 16:17:49 +0000