aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-30x86: fix DMI ioremap leakIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: don't disable TSC in any C states on AMD Fam10hAndi Kleen
The ACPI code currently disables TSC use in any C2 and C3 states. But the AMD Fam10h BKDG documents that the TSC will never stop in any C states when the CONSTANT_TSC bit is set. Make this disabling conditional on CONSTANT_TSC not set on AMD. I actually think this is true on Intel too for C2 states on CPUs with p-state invariant TSC, but this needs further discussions with Len to really confirm :-) So far it is only enabled on AMD. Cc: lenb@kernel.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30git-x86: drivers/pnp/pnpbios/bioscalls.c build fixAndrew Morton
drivers/pnp/pnpbios/bioscalls.c:64: warning: (near initialization for 'bad_bios_desc.<anonymous>') Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: voluntary leave_mm before entering ACPI C3Venki Pallipadi
Aviod TLB flush IPIs during C3 states by voluntary leave_mm() before entering C3. The performance impact of TLB flush on C3 should not be significant with respect to C3 wakeup latency. Also, CPUs tend to flush TLB in hardware while in C3 anyways. On a 8 logical CPU system, running make -j2, the number of tlbflush IPIs goes down from 40 per second to ~ 0. Total number of interrupts during the run of this workload was ~1200 per second, which makes it ~3% savings in wakeups. There was no measurable performance or power impact however. [ akpm@linux-foundation.org: symbol export fixes. ] Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix DMI out of memory problemsParag Warudkar
People with HP Desktops (including me) encounter couple of DMI errors during boot - dmi_save_oem_strings_devices: out of memory and dmi_string: out of memory. On some HP desktops the DMI data include OEM strings (type 11) out of which only few are meaningful and most other are empty. DMI code religiously creates copies of these 27 strings (65 bytes each in my case) and goes OOM in dmi_string(). If DMI_MAX_DATA is bumped up a little then it goes and fails in dmi_save_oem_strings while allocating dmi_devices of sizeof(struct dmi_device) corresponding to these strings. On x86_64 since we cannot use alloc_bootmem this early, the code uses a static array of 2048 bytes (DMI_MAX_DATA) for allocating the memory DMI needs. It does not survive the creation of empty strings and devices. Fix this by detecting and not newly allocating empty strings and instead using a one statically defined dmi_empty_string. Also do not create a new struct dmi_device for each empty string - use one statically define dmi_device with .name=dmi_empty_string and add that to the dmi_devices list. On x64 this should stop the OOM with same current size of DMI_MAX_DATA and on x86 this should save a good amount of (27*65 bytes + 27*sizeof(struct dmi_device) bootmem. Compile and boot tested on both 32-bit and 64-bit x86. Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: get rid of _MASK flagsGlauber de Oliveira Costa
There's no need for the *_MASK flags (TF_MASK, IF_MASK, etc), found in processor.h (both _32 and _64). They have a one-to-one mapping with the EFLAGS value. This patch removes the definitions, and use the already existent X86_EFLAGS_ version when applicable. [ roland@redhat.com: KVM build fixes. ] Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: replace outb_p() with udelay(2) in drivers/input/mouse/pc110pad.cIngo Molnar
replace outb_p() with udelay(2). This is a real ISA device so it likely needs this particular delay. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify struct desc_ptrGlauber de Oliveira Costa
This patch unifies struct desc_ptr between i386 and x86_64. They can be expressed in the exact same way in C code, only having to change the name of one of them. As Xgt_desc_struct is ugly and big, this is the one that goes away. There's also a padding field in i386, but it is not really needed in the C structure definition. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up drivers/char/rtc.cIngo Molnar
tons of style cleanup in drivers/char/rtc.c - no code changed: text data bss dec hex filename 6400 384 32 6816 1aa0 rtc.o.before 6400 384 32 6816 1aa0 rtc.o.after since we seem to have a number of open breakages in this code we might as well start with making the code more readable and maintainable. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: use generic register name in the thread and tss structuresH. Peter Anvin
This changes size-specific register names (eip/rip, esp/rsp, etc.) to generic names in the thread and tss structures. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: nuke a ton of dead hpet codeThomas Gleixner
No users, just ballast Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86: assign IRQs to HPET timers, fixBalaji Rao
Looks like IRQ 31 is assigned to timer 3, even without the patch! I wonder who wrote the number 31. But the manual says that it is zero by default. I think we should check whether the timer has been allocated an IRQ before proceeding to assign one to it. Here is a patch that does this. Signed-off-by: Balaji Rao <balajirrao@gmail.com> Tested-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: assign IRQs to HPET timersBalaji Rao
The userspace API for the HPET (see Documentation/hpet.txt) did not work. The HPET_IE_ON ioctl was failing as there was no IRQ assigned to the timer device. This patch fixes it by allocating IRQs to timer blocks in the HPET. arch/x86/kernel/hpet.c | 13 +++++-------- drivers/char/hpet.c | 45 ++++++++++++++++++++++++++++++++++++++------- include/linux/hpet.h | 2 +- 3 files changed, 44 insertions(+), 16 deletions(-) Signed-off-by: Balaji Rao <balajirrao@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30Mostly revert "e1000/e1000e: Move PCI-Express device IDs over to e1000e"Linus Torvalds
The new e1000e driver is apparently not yet suitable for general use, so mark it experimental, and re-instate all the PCI-Express device IDs in the old and stable e1000 driver so that people (namely me) can continue to use a driver that actually works. Auke & co have been appraised of the situation. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-29cciss: fix bug in overriding ->data_len before completionJens Axboe
For BLOCK_PC requests, we need that length for completing the request. Andrew Vasquez <andrew.vasquez@qlogic.com> reported the following oops Hitting a consistent BUG() with recent Linus' linux-2.6.git: [ 12.941428] ------------[ cut here ]------------ [ 12.944874] kernel BUG at drivers/block/cciss.c:1260! [ 12.944874] invalid opcode: 0000 [1] SMP [ 12.944874] CPU 0 [ 12.944874] Modules linked in: [ 12.944874] Pid: 0, comm: swapper Not tainted 2.6.24 #43 [ 12.944874] RIP: 0010:[<ffffffff8039e43d>] [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf [ 12.944874] RSP: 0018:ffffffff8063aed0 EFLAGS: 00010202 [ 12.944874] RAX: 0000000000000001 RBX: ffff8100cf800010 RCX: ffff81042f1253b0 [ 12.944874] RDX: ffff81042de398f0 RSI: ffff81042de398f0 RDI: 0000000000000001 [ 12.944874] RBP: ffff81042daa0000 R08: ffff81042f1253b0 R09: 0000000000000001 [ 12.944874] R10: 00000000000000fe R11: 0000000000000000 R12: 0000000000000002 [ 12.944874] R13: 0000000000000001 R14: ffff8100cf800000 R15: ffff81042de398f0 [ 12.944874] FS: 0000000000000000(0000) GS:ffffffff805bb000(0000) knlGS:0000000000000000 [ 12.944874] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 12.944874] CR2: 00002afed7eea340 CR3: 000000042dbba000 CR4: 00000000000006e0 [ 12.944874] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.944874] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 12.944874] Process swapper (pid: 0, threadinfo ffffffff805f4000, task ffffffff805624a0) [ 12.944874] Stack: 0000000000000000 ffffffff8063af10 0000000000000001 ffffffff80632d60 [ 12.944874] 0000000000000000 000000000000000a ffffffff805bb900 ffffffff8032038f [ 12.944874] ffffffff8063af10 ffffffff8063af10 ffffffff805bb940 ffffffff802346b4 [ 12.944874] Call Trace: [ 12.944874] <IRQ> [<ffffffff8032038f>] blk_done_softirq+0x69/0x78 [ 12.944874] [<ffffffff802346b4>] __do_softirq+0x6f/0xd8 [ 12.944874] [<ffffffff8020c45c>] call_softirq+0x1c/0x30 [ 12.944874] [<ffffffff8020e347>] do_softirq+0x30/0x80 [ 12.944874] [<ffffffff8020e409>] do_IRQ+0x72/0xd9 [ 12.944874] [<ffffffff8020a50a>] mwait_idle+0x0/0x46 [ 12.944874] [<ffffffff8020a3da>] default_idle+0x0/0x3d [ 12.944874] [<ffffffff8020b7e1>] ret_from_intr+0x0/0xa [ 12.944874] <EOI> [<ffffffff8020a54c>] mwait_idle+0x42/0x46 [ 12.944874] [<ffffffff8020a481>] cpu_idle+0x6a/0xae [ 12.944874] [ 12.944874] [ 12.944874] Code: 0f 0b eb fe 48 8d 85 d8 c0 00 00 48 89 04 24 48 89 c7 e8 e5 [ 12.944874] RIP [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf [ 12.944874] RSP <ffffffff8063aed0> [ 12.944903] ---[ end trace e9c631603f90d22f ]--- which is caused by blk_end_request() returning 'not done' for a request, since it gets asked to complete zero bytes. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-29xsysace: end request handling fixJens Axboe
In ace_fsm_dostate(), the variable 'i' was used only for passing sector size of the request to end_that_request_first(). So I removed it and changed the code to pass the size in bytes directly to __blk_end_request() Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25: (1470 commits) [IPV6] ADDRLABEL: Fix double free on label deletion. [PPP]: Sparse warning fixes. [IPV4] fib_trie: remove unneeded NULL check [IPV4] fib_trie: More whitespace cleanup. [NET_SCHED]: Use nla_policy for attribute validation in ematches [NET_SCHED]: Use nla_policy for attribute validation in actions [NET_SCHED]: Use nla_policy for attribute validation in classifiers [NET_SCHED]: Use nla_policy for attribute validation in packet schedulers [NET_SCHED]: sch_api: introduce constant for rate table size [NET_SCHED]: Use typeful attribute parsing helpers [NET_SCHED]: Use typeful attribute construction helpers [NET_SCHED]: Use NLA_PUT_STRING for string dumping [NET_SCHED]: Use nla_nest_start/nla_nest_end [NET_SCHED]: Propagate nla_parse return value [NET_SCHED]: act_api: use PTR_ERR in tcf_action_init/tcf_action_get [NET_SCHED]: act_api: use nlmsg_parse [NET_SCHED]: act_api: fix netlink API conversion bug [NET_SCHED]: sch_netem: use nla_parse_nested_compat [NET_SCHED]: sch_atm: fix format string warning [NETNS]: Add namespace for ICMP replying code. ...
2008-01-28[PPP]: Sparse warning fixes.Stephen Hemminger
Fix a bunch of warnings in PPP and related drivers. Mostly because sparse doesn't like it when the the function is only marked private in the forward declaration. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add namespace parameter to ip_route_output_key.Denis V. Lunev
Needed to propagate it down to the ip_route_output_flow. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add namespace parameter to ip_route_output_flow.Denis V. Lunev
Needed to propagate it down to the __ip_route_output_key. Signed_off_by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add namespace parameter to ip_dev_find.Denis V. Lunev
in_dev_find() need a namespace to pass it to fib_get_table(), so add an argument. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28ath5k: always extend rx timestamp with tsfBruno Randolf
always extend the rx timestamp with the local TSF, since this information is also needed for proper IBSS merging. this is done in the tasklet for now, maybe has to be moved to the interrupt handler like in madwifi. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: configure backoff for IBSS beacon queueBruno Randolf
in "11.1.2.2 Beacon generation in an IBSS" the IEEE802.11 standard says, each STA should... "b) Calculate a random delay uniformly distributed in the range between zero and twice aCWmin × aSlotTime,". configure cwmin and cwmax of the beacon queue in IBSS mode according to this. unfortunately beacon backoff does not work reliably yet, so i suspect we have a problem somewhere else, since the same settings (and similar beacon timer configuration) work for madwifi. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: use SWBA to detect IBSS HW mergesBruno Randolf
use SWBA (software beacon alert) interrupts to keep track of the next beacon time und check if a HW merge (automatic TSF update) has happened on every received beacon with the same BSSID. this is necessary because the atheros hardware will silently update the local TSF in IBSS mode, but not its beacon timers. if the TSF is ahead of the beacon timers no beacons are sent until the timers wrap around (typically after about 1 minute). this solution is not very nice, since we have to look into every beacon, but there is apparently no other way to detect HW merges. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/base.h: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: better beacon timer calculationBruno Randolf
update ath5k_beacon_update_timers() for better beacon timer calculation in a variety of situations. most important is the possibility to call it with the timestamp of a received beacon, when we detected that a HW merge has happened and we need to reconfigure the beacon timers based on that. we call this from the mac80211 callback reset_tsf now instead of beacon_update, and there will be more use of it in the next patch. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: beacon interval is in TUBruno Randolf
the beacon interval is passed by mac80211 in TU already, so we can directly use it without conversion. also update the comments about TU (1 TU is defined by 802.11 as 1024usec). drivers/net/wireless/ath5k/ath5k.h: Changes-licensed-under: ISC drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/base.h: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: use 3 instead of 0x00000003Bruno Randolf
reviewed beacon timer initialization with register traces from madwifi: what we are doing is correct :). one minor fix: use 3 instead of 0x00000003 - it's more readable. drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix MAC control and microcode initMichael Buesch
This zeros out all microcode related memory before loading the microcode. This also fixes initialization of the MAC control register. The _only_ place where we overwrite the contents of the MAC control register is at the beginning of b43_chip_init(). All other places must do read() -> mask/set -> write() to not overwrite existing bits. This also adds a longer delay for waiting for the microcode to initialize itself. It seems that the current timeout is sufficient on all available devices, but there's no real reason why we shouldn't wait for up to one second. Slow embedded devices might exist. Better safe than sorry. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: reset key cache after resumeJohn W. Linville
Otherwise it may be impossible to connected to an open network after a resume. This is a modified version of an original patch by Alex Eskin <alexeskin@yahoo.com>: https://bugzilla.redhat.com/show_bug.cgi?id=425950#c8 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: use AR5K_KEYTABLE_SIZE when initializing key tableJohn W. Linville
...instead of using AR5K_KEYCACHE_SIZE, which would seem to be a typo/thinko... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix firmware cachingMichael Buesch
We must also store the ID string (filename) for the cached firmware blobs and verify that we really have the right firmware cached before using it. If we don't have the right fw cached, we must free it and request the correct blobs. This fixes bandswitch on A/B/G multi-PHY devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add more N-PHY init codeMichael Buesch
This also adds lots of TODOs. Oh well. Lots of work. :) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43legacy: Remove the PHY spinlockMichael Buesch
This fixes a sparse warning about weird locking. The spinlock is not needed, so simply remove it. This also adds some sanity checks to the PHY and radio locking to protect against recursive locking. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28igb: PCI-Express 82575 Gigabit Ethernet driverAuke Kok
We are pleased to announce a new Gigabit Ethernet product and its driver to the linux community. This product is the Intel(R) 82575 Gigabit Ethernet adapter family. Physical adapters will be available to the public soon. These adapters come in 2- and 4-port versions (copper PHY) currently. Other variants will be available later. The 82575 chipset supports significantly different features that warrant a new driver. The descriptor format is (just like the ixgbe driver) different. The device can use multiple MSI-X vectors and multiple queues for both send and receive. This allows us to optimize some of the driver code specifically as well compared to the e1000-supported devices. This version of the igb driver no lnger uses fake netdevices and incorporates napi_struct members for each ring to do the multi- queue polling. multi-queue is enabled by default and the driver supports NAPI mode only. All the namespace collisions should be gone in this version too. The register macro's have been condensed to improve readability. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28bnx2 annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28annotate netxenAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28annotate myri10geAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28annotate cxgb3Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28annotate chelsioAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28[BNX2]: Fix driver phy_flags name space.Michael Chan
Prefix "bp->phy_flags" names with BNX2_PHY_FLAG_* for consistency. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Fix driver software flag namespace.David S. Miller
Prefix "bnx2->flags" names with BNX2_* for consistency. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2] Update version to 1.7.2.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Add link-down workaround on 5706 serdes.Michael Chan
In some blade systems using the 5706 serdes, the hardware sometimes does not properly generate link down interrupts. We add a workaround in the driver's timer to force a link-down when some PHY registers report loss of SYNC. The parallel detect logic is cleaned up slightly to better integrate the workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Fix minor bug in bnx2_has_work().Michael Chan
It is more correct to get the status block from the bnx2_napi struct instead of the bnx2 struct. It happens that they are the same in this case because we are using the first MSIX vector. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BNX2]: Disable jumbo rx paging on 5709 Ax.Michael Chan
The chip has problem running in this mode and needs to be disabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28b43/nphy.c: include headers to avoid build breakage on some platformsJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28drivers/net/wireless/rt2x00/rt2x00usb.c: fix uninitialized var warningAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28drivers/net/wireless/iwlwifi/iwl-3945.c: fix printk warningAndrew Morton
drivers/net/wireless/iwlwifi/iwl-3945.c: In function 'iwl3945_add_radiotap': drivers/net/wireless/iwlwifi/iwl-3945.c:269: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43legacy: fix use-after-free rfkill bugStefano Brivio
Fix rfkill code which caused a use-after-free bug. Thanks to David Woodhouse for spotting this out. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: pepper main with debug statementHolger Schurig
libertas: re-pepper debug statementThe recent fluff of updates didn't put proper lbs_deb_enter/leave calls into the source code. Add them where appropriate. Also contains some whitespace changes. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 02:35:15 +0000