aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-01-29ath5k: notice a negative keytypeRoel Kluin
To notice a negative keytype Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Add LED_MODE_ASUS supportIvo van Doorn
When the led mode is asus, the activity led mode must be registered otherwise the second LED will not be enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: conf_tx() only need register access for WMM queuesIvo van Doorn
conf_tx() in rt61pci and rt73usb only have to check once if the queue_idx indicates a non-WMM queue and break of the function immediately if that is the case. Only the WMM queues need to have the TX configuration written to the registers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2x00: Update copyright year to 2009Ivo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29Move orinoco Kconfig entries into drivers/net/wireless/orinoco/KconfigAndrey Borzenkov
Since driver now lives in separate subdirectory, move Kconfig entries in own file so they can be tweaked indepndently. It complements "orinoco: Move sources to a subdirectory". Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54spi: remove arch specific dependenciesChristian Lamparter
On Friday 16 January 2009 20:33:43 Kalle Valo wrote: > N800 and N810 support is not on mainline yet, for stlc45xx I decided > to add module parameters for the gpio numbers. Here's the commit from > stlc45xx repo: > > http://gitorious.org/projects/stlc45xx/repos/mainline/commits/35afc5df0027d02d49e6f5bf986dcc4deb4ee6cf This is the same patch for p54spi. It removes all N800/N810 specific code from p54spi, so the driver can be used on other architectures, or configurations as well. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54usb: fix conflict with recent usb changesChristian Lamparter
A recent change in the usb core "USB: change interface to usb_lock_device_for_reset()" conflicts with "p54usb: utilize usb_reset_device for 3887". Sadly, we have to call usb_reset_device before we can upload the firmware on 3887. Unless someone figures out how to reliably stop the 3887 so the hardware is still usable next time we want to start it. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Cleanup buffer type assignmentSujith
The buffer state is already cleared in ATH_TXBUF_RESET. Remove redundant code clearing the type variable. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Revamp TX aggregationSujith
This patch cleans up the convoluted buffer management logic for TX aggregation. Both aggregation creation and completion are addressed. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Handle holding descriptor in TX completion properlySujith
If the current holding descriptor is the last one in the TX queue, *and* it has been marked as STALE, then move it to the free list and bail out, as it has already been processed. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Add a helper function to wake mac80211 queuesSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Merge queue draining functionsSujith
The TX queue draining routines have confusing names, rename them approprately and merge ath_drain_txdataq() with ath_drain_all_txq(). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Remove ath_tx_stopdma and call ath9k_hw_stoptxdma directlySujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Reorganize code in xmit.cSujith
This patch starts cleaning up all the crufty code in transmission path, grouping functions into logical blocks. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Update short guard interval in rate controlSujith
The rate control algorithm needs to know if a STA allows short guard interval, fixing this allows RC to use the correct table. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: rateCodeToIndex is not used, remove itSujith
Calculation of rate indices from ratecode is done in recv.c in a straightforward manner for both HT and legacy rates. This variable is not needed anymore. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: enable support for AR9100Gabor Juhos
Because we have support for the AR9100 devices now, we can enable them. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: fix null pointer dereference in ani monitor codeGabor Juhos
In 'ath9k_ani_reset' the 'ahp->ah_curani' will be initialized only if 'DO_ANI(ah)' true. In 'ath9k_hw_ani_monitor' we are using 'ahp->ah_curani' unconditionally, and it will cause a NULL pointer dereference on AR9100. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: fix ar5416Addac_9100 valuesGabor Juhos
Writing the register at offset 0x98c4 causes a deadlock on the AR913x SoCs. Although i don't have detailed knowledge about these registers, but if i change the register offset according to the 'ar5416Addac' table, it works. Additionally there is no reference to the 0x98c4 elsewhere. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: remove (u16) casts from rtc register accessGabor Juhos
The RTC register offsets don't fit into 'u16' on the AR913x, so we have to remove the existing casts. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: get EEPROM contents from platform data on AHB busGabor Juhos
On the AR913x SOCs we have to provide EEPROM contents via platform_data, because accessing the flash via MMIO is not safe. Additionally different boards may store the radio calibration data at different locations. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: introduce platform driver for AHB bus supportGabor Juhos
This patch adds the platform_driver itself, and modifies the main driver to register it. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: move PCI code into separate fileGabor Juhos
Now that we have converted all bus specific routines to replaceable, we can move the PCI specific codes into a separate file. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: introduce bus specific cleanup routineGabor Juhos
We have left only some PCI specific cleanup code. We have to convert them as well. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: introduce bus specific cache size routineGabor Juhos
The PCI specific bus_read_cachesize routine won't work on the AHB bus, we have to replace it with a suitable one later. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: convert to use bus-agnostic DMA routinesGabor Juhos
Convert to use bus-agnostic DMA routines to make it usable on AHB bus as well. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: convert to struct deviceGabor Juhos
Convert 'struct pci_dev' to 'struct device' to make it usable on the AHB bus as well. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: report killswitch changes even if the interface is downHelmut Schaa
Currently iwl3945 is not able to report hw-killswitch events while the interface is down. This has implications on user space tools (like NetworkManager) relying on rfkill notifications to bring the interface up once the wireless gets enabled through a hw killswitch. Thus, enable the device already in iwl3945_pci_probe instead of iwl3945_up and poll the CSR_GP_CNTRL register to update the killswitch state every two seconds. The polling is only needed on 3945 hardware as this adapter does not use interrupts to signal rfkill changes to the driver (in case no firmware is loaded). The firmware loading is still done in iwl3945_up. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29prism54: remove private implementation of le32_add_cpuHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43: Eliminate compilation warning in b43_op_set_keyLarry Finger
A recent pull from wireless testing generates the following warning: CC [M] drivers/net/wireless/b43/main.o drivers/net/wireless/b43/main.c: In function ‘b43_op_set_key’: drivers/net/wireless/b43/main.c:3636: warning: pointer type mismatch in conditional expression This fix was suggested by Johannes Berg <johannes@sipsolutions.net>. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Use a defined value for pci_set_power_state()Jouni Malinen
Silence sparse by using a defined value PCI_D3hot instead of a magic constant in a pci_set_power_state() call. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: discard 11g caps if reported by an ar5211 eepromHelmut Schaa
At least one ar5211 card (GIGABYTE GN-WLMA101, 168c:0012 subsystem 1458:e800) reports itself as 11g capable which seems to be a bug in the eeprom. initvals.c assumes that ar5211 is only 11b capable and thus refuses to initialize this card. Hence this patch changes the probing for 11g capabilities to discard 11g capabilities for ar5211 cards which allows this specific card to work fine in 11b and 11a modes. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54spi: p54spi driverChristian Lamparter
This patch adds the p54spi driver. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54spi: stlc45xx eeprom blobChristian Lamparter
Usually every prism54 design hardware has a tiny eeprom chip in which all device specific data for calibration and link-tuning is stored. The stlc45xx chips are the only exception. They are made for embedded devices, where space is scarce. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: longbow frontend supportChristian Lamparter
This patch adds support for longbow RF chip. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: prepare the eeprom parser routines for longbowChristian Lamparter
This patch adds support to upload pre-calculated calibration data to the firmware. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: fix bf->skb==NULL panic in ath5k_tasklet_rxBob Copeland
Under memory pressure, we may not be able to allocate a new skb for new packets. If the allocation fails, ath5k_tasklet_rx will exit but will leave a buffer in the list with a NULL skb, eventually triggering a BUG_ON. Extract the skb allocation from ath5k_rxbuf_setup() and change the tasklet to allocate the next skb before accepting a packet. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath9k: Fix basic connectivity issueVasanthakumar Thiagarajan
This patch temporarily fixes a regression introduced by BT coexistence support. There is an instability in connection when BT coexistence is enabled on some h/w. This interim fix introduces a module parameter for BT coexistence configuration. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29rt2400,rt2500: init led_qual for LED_MODE_DEFAULTAndrew Price
Add a check for LED_MODE_DEFAULT so that we use the link LED for rt2400 and rt2500 devices. Signed-off-by: Andrew Price <andy@andrewprice.me.uk> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: if_spi, driver for libertas GSPI devicesColin McCabe
Add initial support for libertas devices using a GSPI interface. This has been tested with the 8686. GSPI is intended to be used on embedded systems. Board-specific parameters are required (see libertas_spi.h). Thanks to everyone who took a look at the earlier versions of the patch. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: upgrade memrecord to p54_tx_infoChristian Lamparter
mac80211 reserves 24 bytes in skb->cb for the driver. So far, we only used them to keep track of used and free device memory. But p54spi will need a slice of it, as well as the stuck frame detection. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29p54: refactor p54_alloc_skbChristian Lamparter
Old firmwares had no problems processing frames which filled eighth of the memory window. However we have to be a bit more careful with fat frames when we talk to new firmwares. Apart from that, I confess the old logic was a bit weird and not very sophisticated. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29IWL: fix WARN typoJiri Slaby
new kew -> a new key Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: Update libertas core with GSPI constantsColin McCabe
Add GSPI constants to libertas core. Fix misleading comment in lbs_setup_firmware. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Fix iwl3945_init_drv()Samuel Ortiz
iwl3945_init_drv() initialises the wrong lock, and sets the wrong power saving default level. With this power saving mode, we are losing a lot of frames in Ad-Hoc mode. This is a bug fix for bug #1873. ( http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1873 ) Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwlwifi: update copyright year to 2009Reinette Chatre
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: Change crypto parameter nameSamuel Ortiz
Now that we're using iwl_mod_params, we want our module parameters names to be in sync with the structure. So, to set iwl_mod_params.sw_crypto, we'd better use a "swcrypto" parameter name instead of the "hwcrypto" current one. Moreover, by setting the decrypted flag properly, this patch also fixes the HW crypto path for 3945 (the current code is not setting it when running HW crypto). This is a bug fix for bug #1872 ( http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1872 ) Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: use hw_params.rx_buf_sizeWinkler, Tomas
This patch makes 3945 use of hw_params.rx_buf_size instead of IWL_RX_BUF_SIZE. It also renames IWL_RX_BUF_SIZE to IWL_RX_BUF_SIZE_3K and moves rx buffer defines into iwl-fh.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: remove double defined 3945 tfd structuresWinkler, Tomas
This patch removes doubly defined struct iwl3945_tfd_frame_data and struct iwl3945_tfd_frame. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29iwl3945: kill iwl3945_x2_queue_usedWinkler, Tomas
This patch replaces iwl3945_x2_queue_used with iwl_queue_used. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 14:52:32 +0000