aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-02-21V4L/DVB (5227): Gl861: hide disabled code from upstream patch systemMichael Krufky
enclose disabled code inside an #if 0 block, instead of /* comments */ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5226): Gl861: fix driver_nameMichael Krufky
Rename driver_name from "gl861" to "dvb_usb_gl861" Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5225): Gl861: fix MODULE_AUTHORMichael Krufky
The author's email address is already in the MODULE_AUTHOR field. This patch adds his name as well. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5224): Gl861: select DVB_ZL10353 if !DVB_FE_CUSTOMISEMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5223): Rename USB_PID_MSI_MEGASKY55801 to USB_PID_MSI_MEGASKY580_55801Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5221): Dvb-usb: initial support for MSI Mega Sky 580 DVB-T based on ↵Carl Lundqvist
GL861 This patch adds support for MSI Mega Sky 580 / GL861 DVB-T USB2.0 Except for the 2 lines added to zl10353.c, zl10353_reset_attach needs to be changed. If I read the code correctly setting parallel_ts will take care of the 3rd byte, but the 2nd byte needs to be 0x0b instead of 0x03 too. I guess these changes needs to be done only for this device, not sure how to do that. The zl10353 changes have been split apart from this patch, into the next patch, soon to follow. Signed-off-by: Carl Lundqvist <comabug@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5218): Zl10353: register definitions updateChris Pascoe
Update the descriptions of "discovered" registers on the zl10353, using the equivalaent mt352 register names. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5217): Zl10353: Implement TRL nominal rate calculationAntti Palosaari
Implement trl nominal rate calculation to Zarlink ZL10353 demod, based on calculation used in Zarlink MT352. This adds support for 6 and 8MHz bandwidth transponders. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5216): Zl10353: add i2c_gate_ctrl supportAntti Palosaari
Implement I2C gate control for Megasky GL861 and SigmaTek AU6610 support. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5215): Experimental support for signal strength/BER/uncorrectable countChris Pascoe
After studying many hours worth of register dumps of MT352 and ZL10353 fed with identically damaged RF signals I have made an educated guess at which registers contain the AGC level, bit error rate and uncorrectable error count values. Implement the IOCTLs that return these values to userspace. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5212): Pvrusb2: Be more forgiving about encoder firmware sizeMike Isely
The pvrusb2 driver previously rejected encoder firmware whose size was not a multiple of 8192. But this is a false check because it's possible to find cx23416 firmware whose size doesn't conform to this limit. So change the firmware loader implementation to be more forgiving of the image size. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5210): Pvrusb2: Fix printk format typoMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5209): Kthread api conversion for dvb_frontend and av7110 fixakpm@linux-foundation.org
avoid double-up(), pointed out by Oliver. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5208): Kthread API conversion for dvb_frontend and av7110Herbert Poetzl
dvb kernel_thread to kthread API port. It is running fine here, including module load/unload and software suspend (which doesn't work as expected with or without this patch :). I didn't convert the dvb_ca_en50221 as I do not have such an interface, but if the conversion process is fine with the v4l-dvb maintainers, it should not be a problem to send a patch for that too ... Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5206): Usbvision: set alternate interface modificationThierry MERLE
- usb alternate selection modified to get the biggest endpoint packet size. - fix sysfs get values for brightness/contrast/hue/saturation Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5205): Usbvision: dynamic allocation for framesThierry MERLE
- fix decoder route output - dynamic frame buffer allocation Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5200): V4l_printk_ioctl_arg() is no longer used.Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5202): DVB: Use ARRAY_SIZE macro when appropriateAhmed S. Darwish
Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5201): Radio/: Convert to generic boolean-valuesRichard Knutsson
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5199): Cx88-video.c: remove struct radionormsAdrian Bunk
This patch removes the unused struct radionorms. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5198): Cafe_ccic.c fix warningJonathan Corbet
Quiet a spurious gcc warning. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5197): Convert to generic boolean-valuesRichard Knutsson
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5196): VIDEO_BUF depends on PCIAndrew Morton
m68k allmodconfig: drivers/media/video/video-buf.c: In function 'videobuf_queue_pci': drivers/media/video/video-buf.c:396: error: 'pci_map_sg' undeclared (first use in this function) drivers/media/video/video-buf.c:396: error: (Each undeclared identifier is reported only once drivers/media/video/video-buf.c:396: error: for each function it appears in.) drivers/media/video/video-buf.c:399: error: 'pci_dma_sync_sg_for_cpu' undeclared (first use in this function) drivers/media/video/video-buf.c:401: error: 'pci_unmap_sg' undeclared (first use in this function) drivers/media/video/video-buf.c: In function 'videobuf_pci_dma_map': Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5195): Frontends: make 4 functions staticAdrian Bunk
This patch makes four needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5193): Remove the unused kernel config option VIDEO_VIDEOBUFRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5189): Budget-av: Call saa7146_vv_release on exitMarco Schluessler
Call saa7146_vv_release on exit. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5188): Add separate configuration data for subsystem 0x13c2:0x1012Oliver Endriss
Fixed problem reported by Teemu Suikki: After a device with subsystem 0x13c2:0x1012 has been installed, devices with subsystem id 0x13c2:0x1011 did not work anymore. Reason: The driver for 0x13c2:0x1012 modified shared configuration data. Fix: Use separate configuration data for those devices. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5183): Fix CC handling in VIDIOC_INT_G_VBI_DATAHans Verkuil
When capturing a 60 Hz input the internal field ID is inverted. The VIDIOC_INT_G_VBI_DATA didn't take that into account and so returned XDS instead of CC and vice versa. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5180): Fix cx2584x revision reporting.Hans Verkuil
Revisions >= 23 were always reported as revision 23. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5175): Pvrusb2: VIDIOC_DBG_[S|G]_REGISTER fixupsMike Isely
Support 64 bit register IDs internally. Only allow root access to this API (for both set and get). Note that actual 64 bit access only becomes possible once the definition for v4l2_register is updated, but this change clears the way for it from the viewpoint of the pvrusb2 driver. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5174): Pvrusb2: video corruption fixesMike Isely
Tweak the encoder setup in order to stop it from corrupting the video data when there is a disruption in the data flow (e.g. a channel change). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5173): Pvrusb2: encoder comm protocol cleanupMike Isely
Update the implementation of the communication protocol for operating the encoder, using updated knowledge about the encoder. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5172): Pvrusb2: Control protocol cleanupMike Isely
Several special-case FX2 commands were being issued through pvr2_write_u16() and pvr2_write_8(), but there's really nothing special case about them. These date from a very early time in the driver development. This patch removes these functions and replaces their use with calls to pvr2_send_request. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5170): Pvrusb2: Add boilerplate to new header fileMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5169): Pvrusb2: Use macro names for FX2 commandsMichael Krufky
This is a maintainability cleanup; use nice names for all the FX2 commands instead of raw bytes. This way we can easily find where we issue FX commands. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5166): Remove obsolete alias defines of CONFIG_* settingsTrent Piepho
The out of tree v4l-dvb build system didn't always override the kernel's configuration settings with v4l-dvb's settings correctly. To work around this, makefiles would define some new macro based on the setting of a config variable. e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set. The v4l-dvb build system should now always override correctly, and this is no longer necessary. This patch gets ride of these extra defines and just uses the CONFIG_* settings directly. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5164): Compat: Handle input_register_device() change and some othersTrent Piepho
input_register_device() was changed to return an error code instead of being void in 2.6.15. Handle it with a macro wrapper in config.h. For this to work, linux/input.h must be included before config.h. This required some trivial header re-ordering in budget-ci.c and ttusb_dec.c. In kernel 2.6.15-rc1 a helper function called setup_timer() was added to linux/timer.h. Add to compat.h, but require that linux/timer.h be included first to give the definition of struct timer_list. A new 4GB DMA zone, __GFP_DMA32, was added in 2.6.15-rc2. Alias it to __GFP_DMA on older kernels. Handle another 2.6.15 "input_dev->dev to input_dev->cdev.dev" change for some recently added code in cinergyT2.c. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5163): Add checks for CAP_SYS_ADMIN to VIDIOC_DBG_G_REGISTERTrent Piepho
Before, root privileges were only needed to set hardware registers, not to read them. On some hardware, reading from the wrong place at the wrong time can hang the machine. So, to be consistent, root privileges are required to read registers on all hardware. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5162): Change VIDIOC_DBG_[SG]_REGISTER ioctls' reg address to 64 bitsTrent Piepho
Maybe someday there will be a device with a register address space > 32-bits, or maybe an i2c device which uses a protocol > 4 bytes long to address its registers. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5161): Dvb-ttpci: call saa7146_vv_release() on exitMarco Schluessler
Call saa7146_vv_release() on exit. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5160): Saa7146_vv: pass correct memory size to pci_free_consistentMarco Schluessler
Pass correct memory size to pci_free_consistent. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5158): Dvb-ttpci: Fixed unregistering the vbi deviceOliver Endriss
Fixed unregistering the vbi device for cards without analog tuner. Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing out this bug. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5157): Set phys, bustype, version, vendor and product for input deviceMatthias Schwarzott
Add phys-string, bustype, version, vendor and product to help udev and others using EVIOCPHYS ioctl to identify the input device node. Code taken (with little changes) from budget-ci.c Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5156): Fix: dma free is being called with wrong argumentsMichael Schimek
Functions buffer_release() in bttv-driver.c and vbi_buffer_release() in bttv-vbi.c are ending with: bttv_dma_free(&fh->cap,fh->btv,buf); For vbi it seems to be wrong. Both functions should end with: bttv_dma_free(q,fh->btv,buf); Thanks to Peter Schlaf <peter.schlaf@web.de> for pointing this. Signed-off-by: Michael H. Schimek <mschimek@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5155): Properly initialize mute and radio frequencyMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5154): Add some debug info, depending on debug levelMauro Carvalho Chehab
With debug>0, it will show mute/unmute and set frequency events with debug>=4, it will show get frequency events Also, some kernel CodingStyle fixes were done. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5153): Make it coherent with vidioc_g_tunerMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5152): Implements VIDIOC_[S|G]_INPUT on radio-aztech/radio-maxiradioMauro Carvalho Chehab
fmtools use VIDIOCSTUNER, with, in turn, calls VIDIOC_S_INPUT on v4l1-compat. So, those ioctls are required for V4L1 to work properly. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5151): Implement VIDIOC_[GS]_AUDIO on aztechMauro Carvalho Chehab
v4l1-compat requires those two ioctls to translate VIDIOC[SG]RADIO into V4L2 calls. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5150): Implement VIDIOC_[GS]_AUDIO on maxiradioMauro Carvalho Chehab
v4l1-compat requires those two ioctls to translate VIDIOC[SG]RADIO into V4L2 calls. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 07:22:05 +0000