aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-01-02[AGPGART] drivers/char/agp/sgi-agp.c: check kmalloc() return valueakpm@osdl.org
drivers/char/agp/sgi-agp.c: check kmalloc() return value Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-28[AGPGART] Fix PCI-posting flush typo.Thomas Hellstrom
Unfortunately there was a typo in one of the patches I sent, (The one now committed to the agpgart tree). It may cause a bus error on i810 type hardware. Signed-off-by: Thomas Hellstrom <thomas@tungstengraphics.com> Signed-off-by: Dave Jones <davej@redhat.com>
2006-12-22[AGPGART] fix detection of aperture size versus GTT size on G965Eric Anholt
On the G965, the GTT size may be larger than is required to cover the aperture. (In fact, on all hardware we've seen, the GTT is 512KB to the aperture's 256MB). A previous commit forced the aperture size to 512MB on G965 to match GTT, which would likely result in hangs at best if users tried to rely on agpgart's aperture size information. Instead, we use the resource length for the aperture size and the system's reported GTT size when available for the GTT size. Because the MSAC registers which had been read for aperture size detection on i9xx chips just cause a change in the resource size, we can use generic code for aperture detection on all i9xx. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
2006-12-22[AGPGART] Remove unnecessary flushes when inserting and removing pages.Thomas Hellstrom
This patch is to speed up flipping of pages in and out of the AGP aperture as needed by the new drm memory manager. A number of global cache flushes are removed as well as some PCI posting flushes. The following guidelines have been used: 1) Memory that is only mapped uncached and that has been subject to a global cache flush after the mapping was changed to uncached does not need any more cache flushes. Neither before binding to the aperture nor after unbinding. 2) Only do one PCI posting flush after a sequence of writes modifying page entries in the GATT. Signed-off-by: Thomas Hellstrom <thomas@tungstengraphics.com> Signed-off-by: Dave Jones <davej@redhat.com>
2006-12-18[AGPGART] K8M890 support for amd-k8.Gabriel Mansi
Signed-off-by: Dave Jones <davej@redhat.com>
2006-12-17Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] longhaul compile fix. [CPUFREQ] Advise not to use longhaul on VIA C7. [CPUFREQ] set policy->curfreq on initialization [CPUFREQ] Trivial cleanup for acpi read/write port in acpi-cpufreq.c [CPUFREQ] fixes typo in cpufreq.c
2006-12-17[SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.Fabrice Knevez
"sunkbd_enable(sunkbd, 0);" has no effect. Adding "sunkbd->enabled = enable" in sunkbd_enable (obvious) Signed-off-by: Fabrice Knevez <nuxdoors@cegetel.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[PATCH] m68k trivial build fixesAl Viro
amikbd: missing declaration sun3_NCR5380: more work_struct mess sun3_NCR5380: cast is not an lvalue Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-16Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Use DEFINE_MUTEX() instead of mutex_init() IB/mthca: Add HCA profile module parameters IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G IB: Fix ib_dma_alloc_coherent() wrapper
2006-12-16[PATCH] pata_via: Cable detect errorAlan
The UDMA66 VIA hardware has no controller side cable detect bits we can use. This patch minimally fixes the problem by reporting unknown in this case and using drive side detection. The old drivers/ide code does some additional tricks but those aren't appropriate now we are in -rc. Without this update UDMA66 via controllers run slowly. They don't fail so it's a borderline call whether this is -rc material or not. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] Fix help text for CONFIG_ATA_PIIXAlan
> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work > correctly. The help text is a bit confusing: > > config ATA_PIIX > tristate "Intel PIIX/ICH SATA support" > depends on PCI > help > This option enables support for ICH5/6/7/8 Serial ATA. > If PATA support was enabled previously, this enables > support for select Intel PIIX/ICH PATA host controllers. New help text Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] initializer entry defined twice in pata_rz1000Ira Snyder
This removes the extra definition of the .error_handler member in the pata_rz1000 driver. Signed-off-by: Ira W. Snyder <kernel@irasnyder.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata: fix platform_device_register_simple() error checkAkinobu Mita
The return value of platform_device_register_simple() should be checked by IS_ERR(). Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ahci: do not mangle saved HOST_CAP while resetting controllerTejun Heo
Do not mangle with HOST_CAP while resetting controller. The code is there for a historical reason. The mangling breaks controller feature detection and 0 PORTS_IMPL workaround code. This problem was spotted by Manoj Kasichainula. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Manoj Kasichainula <manoj@io.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)Tejun Heo
Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)Jeff Garzik
Current Broadcom/Serverworks SATA boards (including Apple K2 SATA) have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO, and ATA DMA continue to work just fine. Acked-by: Anantha Subramanyam <ananth@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[libata] use kmap_atomic(KM_IRQ0) in SCSI simulatorJeff Garzik
We are inside spin_lock_irqsave(). quoth akpm's debug facility: [ 231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 232.232000] ata1.00: configured for UDMA/33 [ 232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic() [ 232.404000] [<c01162e6>] kmap_atomic+0xa9/0x1ab [ 232.404000] [<c0242c81>] ata_scsi_rbuf_get+0x1c/0x30 [ 232.404000] [<c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87 [ 232.404000] [<c0243ab2>] ata_scsiop_mode_sense+0x0/0x309 [ 232.404000] [<c01729d5>] end_bio_bh_io_sync+0x0/0x37 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c0242dcc>] ata_scsi_simulate+0xb0/0x13f [...] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata_piix: use piix_host_stop() in ich_pata_opsTejun Heo
piix_init_one() allocates host private data which should be freed by piix_host_stop(). ich_pata_ops wasn't converted to piix_host_stop() while merging, leaking 4 bytes on driver detach. Fix it. This was spotted using Kmemleak by Catalin Marinas. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Catalin Marinas <catalin.marinas@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-16[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9Jason Gaston
This updated patch adds the Intel ICH9 IDE mode SATA controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-15IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()Roland Dreier
mthca_device_mutex() can be initialized automatically with DEFINE_MUTEX() rather than explicitly calling mutex_init(). This saves a bit of text and shrinks the source by a line, so we may as well do it.... Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15IB/mthca: Add HCA profile module parametersLeonid Arsh
Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4GRoland Dreier
struct srp_device.fmr_page_mask was unsigned long, which means that the top part of addresses above 4G was being chopped off on 32-bit architectures. Of course nothing good happens when data from SRP targets is DMAed to the wrong place. Fix this by changing fmr_page_mask to u64, to match the addresses actually used by IB devices. Thanks to Brian Cain <Brian.Cain@ge.com> and David McMillen <davem@systemfabricworks.com> for help diagnosing the bug and testing the fix. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15[S390] cio: css_register_subchannel race.Stefan Bader
Asynchronous probe can release memory of a subchannel before css_get_ssd_info is called. To fix this call css_get_ssd_info before registering with driver core. Signed-off-by: Stefan Bader <shbader@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] Fix reboot hang on LPARsMichael Holzheu
Reboot hangs on LPARs without diag308 support. The reason for this is, that before the reboot is done, the channel subsystem is shut down. During the reset on each possible subchannel a "store subchannel" is done. This operation can end in a program check interruption, if the specified subchannel set is not implemented by the hardware. During the reset, currently we do not have a program check handler, which leads to the described kernel bug. We install now a new program check handler for the reboot code to fix this problem. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] sclp_cpi module license.Christian Borntraeger
sclp_cpi is GPL. Make the module not taint the kernel Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] zcrypt: module unload fixes.Ralph Wuerthner
Add code to reset all queues for a domain and add missing tasklet_kill call to ap bus module exit code. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-15[S390] Hipersocket multicast queue: make sure outbound handler is calledUrsula Braun
A HiperSocket multicast queue works asynchronously. When sending buffers, the buffer state change from PRIMED to EMPTY may happen delayed. Reschedule the checking for changes in the outbound queue, if there are still PRIMED buffers. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-13Driver core: Make platform_device_add_data accept a const pointerScott Wood
platform_device_add_data() makes a copy of the data that is given to it, and thus the parameter can be const. This removes a warning when data from get_property() on powerpc is handed to platform_device_add_data(), as get_property() returns a const pointer. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13Driver core: "platform_driver_probe() can save codespace": save codespaceAndrew Morton
This function can be __init Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13driver core: delete virtual directory on class_unregister()Akinobu Mita
Class virtual directory is created as the need arises. But it is not deleted when the class is unregistered. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-13[PATCH] Add support for Korenix 16C950-based PCI cardsRussell King
This adds initial support to 8250-pci for the Korenix Jetcard PCI serial cards. The JC12xx cards are standard RS232-based serial cards utilising the Oxford 16C950 device. The JC14xx are RS422/RS485-based cards, but in order for these to be supported natively, we will need additional tweaks to the 8250 layers so we can specify some values for the 950's registers. Hence, these two entries are commented out. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Fixup cciss error handling [PATCH] Allow as-iosched to be unloaded [PATCH 2/2] cciss: remove calls to pci_disable_device [PATCH 1/2] cciss: map out more memory for config table [PATCH] Propagate down request sync flag Resolve trivial whitespace conflict in drivers/block/cciss.c manually.
2006-12-13Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: Add MAINTAINERS entry for new ams driver hwmon: New AMS hardware monitoring driver hwmon/w83793: Add documentation and maintainer hwmon: New Winbond W83793 hardware monitoring driver hwmon: Update Rudolf Marek's e-mail address hwmon/f71805f: Fix the device address decoding hwmon/f71805f: Always create all fan inputs hwmon/f71805f: Add support for the Fintek F71872F/FG chip hwmon: New PC87427 hardware monitoring driver hwmon/it87: Remove the SMBus interface support hwmon/hdaps: Update the list of supported devices hwmon/hdaps: Move the DMI detection data to .data hwmon/pc87360: Autodetect the VRM version hwmon/f71805f: Document the fan control features hwmon/f71805f: Add support for "speed mode" fan speed control hwmon/f71805f: Support DC fan speed control mode hwmon/f71805f: Let the user adjust the PWM base frequency hwmon/f71805f: Add manual fan speed control hwmon/f71805f: Store the fan control registers
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] sstfb: add sysfs interfaceHelge Deller
Modify the sstfb (Voodoo1/2) driver: - fix a memleak when removing the sstfb module - fix sstfb to use the fbdev default videomode database - add module option "mode_option" to set initial screen mode - add sysfs-interface to turn VGA-passthrough on/off via /sys/class/graphics/fbX/vgapass - remove old debug functions from ioctl interface Signed-off-by: Helge Deller <deller@gmx.de> Acked-By: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] fbdev: remove references to non-existent fbmon_valid_timings()Geert Uytterhoeven
Remove references to non-existent fbmon_valid_timings() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] HPT37x: read f_CNT saved by BIOS from portSergei Shtylyov
The undocumented register BIOS uses for saving f_CNT seems to only be mapped to I/O space while all the other HPT3xx regs are dual-mapped. Looks like another HighPoint's dirty trick. With this patch, the deadly kernel oops on the cards having the modern HighPoint BIOSes is now at last gone! Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: HPT3xx: fix PCI clock detectionSergei Shtylyov
Use the f_CNT value saved by the HighPoint BIOS if available as reading it directly would give us a wrong PCI frequency after DPLL has already been calibrated by BIOS. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix the case of multiple HPT3xx chips presentSergei Shtylyov
init_chipset_hpt366() modifies some fields of the ide_pci_device_t structure depending on the chip's revision, so pass it a copy of the structure to avoid issues when multiple different chips are present. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix HPT3xx hotswap supportSergei Shtylyov
Fix the broken hotswap code: on HPT37x it caused RESET- to glitch when tristating the bus (the MISC control 3/6 and soft control 2 need to be written to in the certain order), and for HPT36x the obsolete HDIO_TRISTATE_HWIF ioctl() handler was called instead which treated the state argument wrong. Also, get rid of the soft control reg. 1 wtite to enable IDE interrupt -- this is done in init_hpt37x() already... Have been tested on HPT370 and 371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: optimize HPT37x timing tablesSergei Shtylyov
Save some space on the timing tables by introducing the separate transfer mode table in which the mode lookup is done to get the index into the timing table itself. Get rid of the rest of the obsolete/duplicate tables and use one set of tables for the whole HPT37x chip family like the HighPoint open-source drivers do. Documnent the different timing register layout for the HPT36x chip family (this is my guesswork based on the timing values). Have been tested and works fine on HPT370/302/371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: fix HPT37x timing tablesSergei Shtylyov
Fix/remove bad/unused timing tables: HPT370/A 66 MHz tables weren't really needed (the chips are not UltraATA/133 capable and shouldn't support 66 MHz PCI) and had many modes over- and underclocked, HPT372 33 MHz table was in fact for 66 MHz and 50 MHz table missed UltraDMA mode 6, HPT374 33 MHz table was really for 50 MHz... (Actually, HPT370/A 33 MHz tables also have issues. e.g. HPT370 has PIO modes 0/1 overlocked.) There's also no need in the separate HPT374 tables because HPT372 timings should be the same (and those tables has UltraDMA mode 6 which HPT374 supports depending on HPT374_ALLOW_ATA133_6 #define)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] ide: HPT3xxN clocking fixesSergei Shtylyov
Fix serious problems with the HPT372N clock turnaround code: - the wrong ports were written to when called for the secondary channel; - it didn't serialize access to the channels; - turnaround shou;dn't be done on 66 MHz PCI; - caching the clock mode per-channel caused it to get out of sync with the actual register value. Additionally, avoid calibrating PLL twice (for each channel) as the second try results in a wrong PCI frequency and thus in the wrong timings. Make the driver deal with HPT302N and HPT371N correctly -- the clocking and (seemingly) a need for clock tunaround is the same as for HPT372N. HPT371/N chips have only one, secondary channel, so avoid touching their "pure virtual" primary channel, and disable it if the BIOS haven't done this already. Also, while at it, disable UltraATA/133 for HPT372 by default -- 50 MHz DPLL clock don't allow for this speed anyway. And remove the traces of the former bad patch that wasn't even applicable to this version of driver. Has been tested on HPT370/371N, unfortunately I don't have an instant access to the other chips... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] remove the broken BLK_DEV_SWIM_IOP driverAdrian Bunk
The BLK_DEV_SWIM_IOP driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] n_r3964: Use struct pid to track user space clientsEric W. Biederman
Currently this driver tracks user space clients it should send signals to. In the presenct of file descriptor passing this is appears susceptible to confusion from pid wrap around issues. Replacing this with a struct pid prevents us from getting confused, and prepares for a pid namespace implementation. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] tty_io.c balance tty_ldisc_ref()Dan Carpenter
tty_ldisc_deref() should only be called when tty_ldisc_ref() succeeds otherwise it triggers a BUG(). There's already a function tty_ldisc_flush() that flushes properly. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] rtc framewok: rtc_wkalrm.enabled reporting updatesDavid Brownell
Fix a glitch in the procfs dumping of whether the alarm IRQ is enabled: use the traditional name (from drivers/char/rtc.c and many other places) of "alarm_IRQ", not "alrm_wakeup" (which didn't even match the efirtc code, which originated that reporting API). Also, update a few of the RTC drivers to stop providing that duplicate status, and/or to expose it properly when reporting the alarm state. We really don't want every RTC driver doing their own thing here... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] rtc: remove syslog spam on registrationDavid Brownell
This removes some syslog spam as RTC drivers register; debug messages shouldn't come out at "info" level. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] RTC driver init adjustmentJan Beulich
- conditionalizes procfs code upon CONFIG_PROC_FS (to reduce code size when that option is not enabled) - make initialization no longer fail when the procfs entry can't be allocated (namely would initialization always have failed when CONFIG_PROC_FS was not set) - move the formerly file-scope static variable rtc_int_handler_ptr into the only function using it, and makes it automatic. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] rtc: fx error caseJan Beulich
Ensure RTC driver doesn't use its timer when it doesn't get to set it up (as it cannot currently prevent other of its functions to be called from outside when not built as a module - probably this should also be addressed). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 00:08:19 +0000