aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-12-12RDMA/cma: Remove unneeded qp_type parameter from rdma_cmSean Hefty
The qp_type parameter into the rdma_cm is unneeded, and can be misleading. The QP type should be determined from the port space. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12IB/ipath: Fix IRQ for PCI Express HCAsRoland Dreier
Commit 51f65ebc ("IB/ipath - program intconfig register using new HT irq hook"), which fixed interrupts for HyperTransport HCAs, broke PCI Express HCAs, because for those HCAs, the driver uses the value of pdev->irq before pci_enable_msi() and ends up getting a totally bogus IRQ number. Fix this by using the value of pdev->irq after pci_enable_msi(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/amso1100: Fix memory leak in c2_qp_modify()Krishna Kumar
vq_req is leaked in error cases. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12IB/iser: Remove unused "write-only" variablesRoland Dreier
Remove variables that are set but then never looked at in the iSER initiator. These cleanups came from David Binderman's list of "set but never used" warnings from icc. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12IB/ipath: Remove unused "write-only" variablesRoland Dreier
Remove variables that are set but then never looked at in the ipath driver. These cleanups came from David Binderman's list of "set but never used" warnings from icc. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12IB/fmr: ib_flush_fmr_pool() may wait too longRoland Dreier
ib_flush_fmr_pool() stashes away the request generation number properly, but then goes ahead and rereads it every time it tests whether the flush generation number has caught up. This means that there is a theoretical possibility of livelock, if the request generation number keeps getting bumped and the flush generation number never catches up. The fix is simple: use the request generation number read at the beginning of the function. Also, atomic_inc() followed by atomic_read() can be replaced with atomic_int_return(). There's no real requirement for atomicity here but we might as well shrink the code. This bug was discovered using David Binderman's list of "set but never used" warnings from icc. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12[PATCH] remove config ordering/dependency between ucb1400-ts and sound subsystemNicolas Pitre
Commit 2d4ba4a3b9aef95d328d74a17ae84f8d658059e2 introduced a dependency that was never meant to exist when the ac97_bus.c module was created. Move ac97_bus.c up the directory hierarchy to make sure it is built when selected even if sound is configured out so things work as originally intended. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-12Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Fix OMAP clock prescaler to match the comment i2c: Refactor a kfree in i2c-dev i2c: Fix return value check in i2c-dev i2c: Enable PEC on more i2c-i801 devices i2c: Discard the i2c algo del_bus wrappers i2c: New ARM Versatile/Realview bus driver i2c: fix broken ds1337 initialization i2c: i2c-i801 documentation update i2c: Use the __ATTR macro where possible i2c: Whitespace cleanups i2c: Use put_user instead of copy_to_user where possible i2c: New Atmel AT91 bus driver i2c: Add support for nested i2c bus locking i2c: Cleanups to the i2c-nforce2 bus driver i2c: Add request/release_mem_region to i2c-ibm_iic bus driver i2c: New Philips PNX bus driver i2c: Delete the broken i2c-ite bus driver i2c: Update the list of driver IDs i2c: Fix documentation typos
2006-12-12Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (29 commits) sh: Fixup SH-2 BUG() trap handling. sh: Use early_param() for earlyprintk parsing. sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096. sh: Fixup .data.page_aligned. sh: Hook up SH7722 scif ipr interrupts. sh: Fixup sh_bios() trap handling. sh: SH-MobileR SH7722 CPU support. sh: Fixup dma_cache_sync() callers. sh: Convert remaining remap_area_pages() users to ioremap_page_range(). sh: Fixup kernel_execve() for syscall cleanups. sh: Fix get_wchan(). sh: BUG() handling through trapa vector. rtc: rtc-sh: alarm support. rtc: rtc-sh: fix rtc for out-by-one for the month. sh: Kill off unused SE7619 I/O ops. serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings. sh: Split out atomic ops logically. sh: Fix Solution Engine 7619 build. sh: Trivial build fixes for SH-2 support. sh: IPR IRQ updates for SH7619/SH7206. ...
2006-12-12[PATCH] net, 8139too.c: fix netpoll deadlockIngo Molnar
fix deadlock in the 8139too driver: poll handlers should never forcibly enable local interrupts, because they might be used by netpoll/printk from IRQ context. ================================= [ INFO: inconsistent lock state ] 2.6.19 #11 --------------------------------- inconsistent {softirq-on-W} -> {in-softirq-W} usage. swapper/1 [HC0[0]:SC1[1]:HE1:SE0] takes: (&npinfo->poll_lock){-+..}, at: [<c0350a41>] net_rx_action+0x64/0x1de {softirq-on-W} state was registered at: [<c0134c86>] mark_lock+0x5b/0x39c [<c0135012>] mark_held_locks+0x4b/0x68 [<c01351e9>] trace_hardirqs_on+0x115/0x139 [<c02879e6>] rtl8139_poll+0x3d7/0x3f4 [<c035c85d>] netpoll_poll+0x82/0x32f [<c035c775>] netpoll_send_skb+0xc9/0x12f [<c035cdcc>] netpoll_send_udp+0x253/0x25b [<c0288463>] write_msg+0x40/0x65 [<c011cead>] __call_console_drivers+0x45/0x51 [<c011cf16>] _call_console_drivers+0x5d/0x61 [<c011d4fb>] release_console_sem+0x11f/0x1d8 [<c011d7d7>] register_console+0x1ac/0x1b3 [<c02883f8>] init_netconsole+0x55/0x67 [<c010040c>] init+0x9a/0x24e [<c01049cf>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff irq event stamp: 819992 hardirqs last enabled at (819992): [<c0350a16>] net_rx_action+0x39/0x1de hardirqs last disabled at (819991): [<c0350b1e>] net_rx_action+0x141/0x1de softirqs last enabled at (817552): [<c01214e4>] __do_softirq+0xa3/0xa8 softirqs last disabled at (819987): [<c0106051>] do_softirq+0x5b/0xc9 other info that might help us debug this: no locks held by swapper/1. stack backtrace: [<c0104d88>] dump_trace+0x63/0x1e8 [<c0104f26>] show_trace_log_lvl+0x19/0x2e [<c010532d>] show_trace+0x12/0x14 [<c0105343>] dump_stack+0x14/0x16 [<c0134980>] print_usage_bug+0x23c/0x246 [<c0134d33>] mark_lock+0x108/0x39c [<c01356a7>] __lock_acquire+0x361/0x9ed [<c0136018>] lock_acquire+0x56/0x72 [<c03aff1f>] _spin_lock+0x35/0x42 [<c0350a41>] net_rx_action+0x64/0x1de [<c0121493>] __do_softirq+0x52/0xa8 [<c0106051>] do_softirq+0x5b/0xc9 [<c0121338>] irq_exit+0x3c/0x48 [<c0106163>] do_IRQ+0xa4/0xbd [<c01047c6>] common_interrupt+0x2e/0x34 [<c011db92>] vprintk+0x2c0/0x309 [<c011dbf6>] printk+0x1b/0x1d [<c01003f2>] init+0x80/0x24e [<c01049cf>] kernel_thread_helper+0x7/0x10 ======================= Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-12Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4954): Fix: On ia64, i2c adap->inb/adap->outb are wrongly evaluated
2006-12-12V4L/DVB (4954): Fix: On ia64, i2c adap->inb/adap->outb are wrongly evaluatedMauro Carvalho Chehab
i2c defines two callbacks (inb/outb). On ia64, since it defines also two macros with those names, it causes the following errors: drivers/media/video/usbvision/usbvision-i2c.c:64:39: macro "outb" passed 4 arguments, but takes just 2 drivers/media/video/usbvision/usbvision-i2c.c: In function `try_write_address': drivers/media/video/usbvision/usbvision-i2c.c:64: warning: assignment makes integer from pointer without a cast drivers/media/video/usbvision/usbvision-i2c.c:89:38: macro "inb" passed 4 arguments, but takes just 1 drivers/media/video/usbvision/usbvision-i2c.c: In function `try_read_address': drivers/media/video/usbvision/usbvision-i2c.c:89: warning: assignment makes integer from pointer without a cast drivers/media/video/usbvision/usbvision-i2c.c:85: warning: unused variable `buf' drivers/media/video/usbvision/usbvision-i2c.c:173:53: macro "inb" passed 4 arguments, but takes just 1 drivers/media/video/usbvision/usbvision-i2c.c: In function `usb_xfer': drivers/media/video/usbvision/usbvision-i2c.c:173: warning: assignment makes integer from pointer without a cast drivers/media/video/usbvision/usbvision-i2c.c:179:54: macro "outb" passed 4 arguments, but takes just 2 drivers/media/video/usbvision/usbvision-i2c.c:179: warning: assignment makes integer from pointer without a cast thanks to Andrew Morton for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-12[PATCH] remove blk_queue_activity_fnBoaz Harrosh
While working on bidi support at struct request level I have found that blk_queue_activity_fn is actually never used. The only user is in ide-probe.c with this code: /* enable led activity for disk drives only */ if (drive->media == ide_disk && hwif->led_act) blk_queue_activity_fn(q, hwif->led_act, drive); And led_act is never initialized anywhere. (Looking back at older kernels it was used in the PPC arch, but was removed around 2.6.18) Unless it is all for future use off course. (this patch is against linux-2.6-block.git as off 2006/12/4) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) [NETPOLL]: Fix local_bh_enable() warning. [IPVS]: Make ip_vs_sync.c <= 80col wide. [IPVS]: Use msleep_interruptable() instead of ssleep() aka msleep() [HAMRADIO]: Fix baycom_epp.c compile failure. [DCCP]: Whitespace cleanups [DCCP] ccid3: Fixup some type conversions related to rtts [DCCP] ccid3: BUG-FIX - conversion errors [DCCP] ccid3: Reorder packet history source file [DCCP] ccid3: Reorder packet history header file [DCCP] ccid3: Make debug output consistent [DCCP] ccid3: Perform history operations only after packet has been sent [DCCP] ccid3: TX history - remove unused field [DCCP] ccid3: Shift window counter computation [DCCP] ccid3: Sanity-check RTT samples [DCCP] ccid3: Initialise RTT values [DCCP] ccid: Deprecate ccid_hc_tx_insert_options [DCCP]: Warn when discarding packet due to internal errors [DCCP]: Only deliver to the CCID rx side in charge [DCCP]: Simplify TFRC calculation [DCCP]: Debug timeval operations ...
2006-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (36 commits) [POWERPC] Generic BUG for powerpc [PPC] Fix compile failure do to introduction of PHY_POLL [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set [POWERPC] Remove old dcr.S [POWERPC] Fix SPU coredump code for max_fdset removal [POWERPC] Fix irq routing on some 32-bit PowerMacs [POWERPC] ps3: Add vuart support [POWERPC] Support ibm,dynamic-reconfiguration-memory nodes [POWERPC] dont allow pSeries_probe to succeed without initialising MMU [POWERPC] micro optimise pSeries_probe [POWERPC] Add SPURR SPR to sysfs [POWERPC] Add DSCR SPR to sysfs [POWERPC] Fix 440SPe CPU table entry [POWERPC] Add support for FP emulation for the e300c2 core [POWERPC] of_device_register: propagate device_create_file return code [POWERPC] Fix mmap of PCI resource with hack for X [POWERPC] iSeries: head_64.o needs to depend on lparmap.s [POWERPC] cbe_thermal: Fix initialization of sysfs attribute_group [POWERPC] Remove QE header files from lite5200.c [POWERPC] of_platform_make_bus_id(): make `magic' int ...
2006-12-12sh: SH-MobileR SH7722 CPU support.Paul Mundt
This adds CPU support for the SH7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12rtc: rtc-sh: alarm support.Jamie Lenehan
This adds alarm support for the RTC_ALM_SET, RTC_ALM_READ, RTC_WKALM_SET and RTC_WKALM_RD operations to rtc-sh. The only unusual part is the handling of the alarm interrupt. If you clear the alarm flag (AF) while the time in the RTC still matches the time in the alarm registers than AF is immediately re-set, and if the alarm interrupt (AIE) is still enabled then it re-triggers. I was originally getting around 20k+ interrupts generated during the second when the RTC and alarm registers matches. The solution I've used is to clear AIE when the alarm goes off and then use the carry interrupt to re-enabled it. The carry interrupt will check AF and re-enabled AIE if it's clear. If AF is not clear it'll clear it and then the check will be repeated next carry interrupt. This a bit in rtc structure that indicates that it's waiting to have AIE re-enabled so it doesn't turn it on when it wasn't enabled anyway. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12rtc: rtc-sh: fix rtc for out-by-one for the month.Jamie Lenehan
The RMONCNT register, which holds the month in the RTC, takes a value between 1 and 12 while the tm_mon field in the time structures takes a value between 0 and 11. This wasn't being taken into account in rtc-sh resulting in the month being out by one. eg, on my board during boot the RTC is set to: RTC is set to Thu Jul 01 09:00:00 1999 but "hwclock -r" immediately after logging in was showing: Sun Aug 1 09:01:43 1999 0.000000 seconds Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12rtc: rtc-sh: fix for period rtc interrupts.Jamie Lenehan
When testing the per second interrupt support (RTC_UIE_ON/RTC_UIE_OFF) of the new RTC system it would die in sh_rtc_interrupt due to a null ptr dereference. The following gets it working correctly. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11[HAMRADIO]: Fix baycom_epp.c compile failure.Ralf Baechle
Fix foobar in 15b1c0e822f578306332d4f4c449250db5c5dceb and e8cc49bb0fdb9e18a99e6780073d1400ba2b0d1f patch series. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-11[ATM]: Ignore generated file pca200e_ecd.bin2Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-11[NET]: Fix WAN routers kconfig dependency.Randy Dunlap
Currently WAN router drivers can be built in-kernel while the register/unregister_wan_device interfaces are built as modules. This causes: drivers/built-in.o: In function `cycx_init': cycx_main.c:(.init.text+0x5c4b): undefined reference to `register_wan_device' drivers/built-in.o: In function `cycx_exit': cycx_main.c:(.exit.text+0x560): undefined reference to `unregister_wan_device' make: *** [.tmp_vmlinux1] Error 1 The problem is caused by tristate -> bool conversion (y or m => y), so convert WAN_ROUTER_DRIVERS to a tristate so that the correct dependency is preserved. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: AT91 MMC update for 2.6.19 mmc: Change SDHCI iomem error to a warning mmc: fix "prev->state: 2 != TASK_RUNNING??" problem on SD/MMC card removal AT91 MMC 5 : Minor cleanups AT91 MMC 4 : Interrupt handler cleanup AT91 MMC 3 : Move global mci_clk variable AT91 MMC 2 : Use platform resources AT91 MMC 1: Pass host structure.
2006-12-11[PATCH] smc91x: Kill off excessive versatile hooks.Paul Mundt
This looks like a result of too many auto-merges. The CONFIG_ARCH_VERSATILE case was handled a total of 6 times. This kills 5 of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org> -- drivers/net/smc91x.h | 90 --------------------------------------------------- 1 file changed, 90 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] myri10ge: update driver version to 1.1.0Brice Goglin
Update driver version to 1.1.0. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] myri10ge: fix big_bytes in case of vlan framesBrice Goglin
Fix sizing of big_bytes in the case of vlan frames. The 4 VLAN_HLEN bytes were omitted, leading to sizing the big buffer 4 bytes smaller than it should be. Due to how rx buffers are carved from pages, this was harmless for the common (9000, 1500) byte MTUs, but could lead to data corruption for some MTUs. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] myri10ge: Full vlan frame in small_bytesBrice Goglin
Receive full vlan frames into smalls when running with a jumbo MTU. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] myri10ge: drop contiguous skb routinesBrice Goglin
Drop the old routines that used the physically contigous skb now that we use the physical pages. And rename myri10ge_page_rx_done() to myri10ge_rx_done() as it was previously. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] myri10ge: switch to page-based skbBrice Goglin
Switch to physical page skb, by calling the new page-based allocation routines and using myri10ge_page_rx_done(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] myri10ge: add page-based skb routinesBrice Goglin
Add physical page skb allocation routines and page based rx_done, to be used by upcoming patches. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] myri10ge: indentation cleanupsBrice Goglin
Indentation cleanups to synchronize to our tree which is automatically indent'ed. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] chelsio: working NAPIStephen Hemminger
This driver tries to enable/disable NAPI at runtime, but does so in an unsafe manner, and the NAPI interrupt handling is a mess. Replace it with a compile time selected NAPI implementation. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] MACB: Use __raw register accessHaavard Skinnemoen
Since macb is a chip-internal device, use __raw_readl and __raw_writel instead of readl/writel. This will perform native-endian accesses, which is the right thing to do on both AVR32 and ARM devices. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] MACB: Use struct delayed_work instead of struct work_structHaavard Skinnemoen
The macb driver calls schedule_delayed_work() and friends, so we need to use a struct delayed_work along with it. The conversion was explained by David Howells on lkml Dec 5 2006: http://lkml.org/lkml/2006/12/5/269 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] ucc_geth: Initialize mdio_lock.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11[PATCH] ucc_geth: compilation error fixesScott Wood
Fix compilation failures when building the ucc_geth driver with spinlock debugging. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11AT91 MMC update for 2.6.19Andrew Victor
The driver is usable on the newer SAM9 processors so replace all text references to AT91RM9200 with just AT91. The controller bug where all the words are byte-swapped is fixed on the AT91SAM9 processors. The byte-swapping work-around therefore only needs to be done if cpu_is_at91rm9200(). [Original patch from Wojtek Kaniewski] The AT91RM9200 and AT91SAM9260 processors support two MMC/SD slots - the slot which is connected is now passed via the platform_data and the correct slot selected in the AT91_MCI_SDCR register. The driver should not be calling at91_set_gpio_output() since the VCC pin should have already been configured as an output in the processor/board setup code. The driver should call at91_set_gpio_value(). Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11mmc: Change SDHCI iomem error to a warningPierre Ossman
Some controllers report an invalid iomem size, but seem to work correctly anyway. Change our current error to just a warning and hope it doesn't cause too much problems. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11mmc: fix "prev->state: 2 != TASK_RUNNING??" problem on SD/MMC card removalVitaly Wool
Currently on SD/MMC card removal the system exhibits the following message (the platform is ARM Versatile): prev->state: 2 != TASK_RUNNING?? mmcqd/762[CPU#0]: BUG in __schedule at linux-2.6/kernel/sched.c:3826 (akpm: someone tried to fix this, but it's still wrong) Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11AT91 MMC 5 : Minor cleanupsAndrew Victor
A number of small cleanups to the AT91RM9200 MMC driver: - fix warnings generated by pr_debug(). - prepend "AT91 MMC:" to printk() messages. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11AT91 MMC 4 : Interrupt handler cleanupAndrew Victor
This patch simplifies the AT91RM9200 MMC interrupt handler code so that it doesn't re-read the Interrupt Status and Interrupt Mask registers multiple times. Also defined AT91_MCI_ERRORS instead of using the hard-coded 0xffff0000. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11AT91 MMC 3 : Move global mci_clk variableAndrew Victor
Move the global 'mci_clk' variable into the local 'at91mci_host' structure. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11AT91 MMC 2 : Use platform resourcesAndrew Victor
Use the I/O base-address and IRQ passed to the driver via the platform_device resources instead of using hardcoded values. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11AT91 MMC 1: Pass host structure.Andrew Victor
The I/O base address is now stored in the 'at91mci_host' structure. We therefore have to pass this structure to at91_mci_read() and at91_mci_write(). Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11[POWERPC] ps3: Add vuart supportGeoff Levand
Adds support for the PS3 virtual UART (vuart). The vuart provides a bi-directional byte stream data link between logical partitions. This is needed for the ps3 graphics driver and the ps3 power control support to be able to communicate with the lv1 policy module. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-10i2c: Fix OMAP clock prescaler to match the commentJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-12-10i2c: Refactor a kfree in i2c-devJean Delvare
Refactor kfree(i2c_dev) into return_i2c_dev(). This saves some code and makes more sense, as the memory is allocated in get_free_i2c_dev(). Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-10i2c: Fix return value check in i2c-devAkinobu Mita
device_create() returns error code as pointer on failures. This patch checks the return value of device_create() by using IS_ERR(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-10i2c: Enable PEC on more i2c-i801 devicesJean Delvare
Enable PEC on recent Intel SMBus controllers (ICH6, ICH7, ICH8, ICH9 and ESB2.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jason Gaston <jason.d.gaston@intel.com>