aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-08-29libertas: convert CMD_802_11_RADIO_CONTROL to a direct commandDan Williams
and return errors for operations like join & scan that aren't possible when the radio is turned off. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29libertas: convert CMD_802_11_DEAUTHENTICATE to a direct commandDan Williams
and remove DISASSOCIATE because it's not in any of the specs and has never been used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29libertas: convert CMD_802_11_RF_TX_POWER to a direct commandDan Williams
And while we're at it, grab min/max TX power from the firmware and use that to validate incoming TX power requests from WEXT. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ssb: Update for Rev. 5 SPROMLarry Finger
Although a revision 5 SPROM has not been seen in the wild, the open-source portion of the MIPS driver 4.150.10.5 describes its layout, which is mostly inherited from revision 4. This patch implements the differences. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Add IEEE80211_HW_RX_INCLUDES_FCS to hw flagsSujith
Don't trim the FCS before passing the frame to mac80211, move TSF_TO_TU to core.h and delete more unused macros. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use definition from ieee80211.hSujith
Also, Max RX-ampdu and mpdu-density are ath9k specific. Rename appropriately. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Miscellaneous fixesSujith
This patch removes ath_vap_listen() and dma wrapper macros. Also, Inline abuse is cleaned up and a few typos are fixed. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Random cleanupSujith
Remove dead code, add newlines, fix indentation. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove remaining occurences of ath_skb_map functionsSujith
Use direct pci functions instead. Also, use sc_ht_info.tx_chan_width directly and remove ath_cwm_macmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Fix TX control flag use for no ACK and RTS/CTSJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Assign seq# when mac80211 requests thisJouni Malinen
Use TX control flag IEEE80211_TX_CTL_ASSIGN_SEQ as a request to update the seq# for the frames. This will likely require some further cleanup to get seq# correctly for Beacons vs. other frames and also potentially for multiple BSSes. Anyway, this is better than ending up sending out most frames with seq# 0. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Fix TX status reportingJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Updated Beacon generation to use mac80211-styleJouni Malinen
This change moves ath9k to use mac80211-generated Beacon frames instead of trying to allocate a single Beacon frame and then update it. In addition, the remaining ath_skb_{map,unmap}_single() wrapper calls are replaced with direct pci_{map,unmap}_single() calls in beacon.c. Power save buffering for multicast/broadcast frames is not yet converted to use mac80211-style (frames to be buffered inside mac80211, not in driver). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Allow AP mode to be enabledJouni Malinen
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Trim struct ath_softcSujith
Add sc_rxflush and sc_noreset as bitfields to sc_flags. Remove a few variables and function prototypes that are unused. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use ah_curchan and remove sc_curchan which is redundantSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use bitfields for sc operationsSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use a single opmode variableSujith
ah_opmode and sc_opmode are redundant. This patch removes sc_opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Unused macros, variablesSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove ar5416hal and assign default values directlySujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Remove a few unnecessary macrosSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Use bitfields for buffer typeSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: RX Filter cleanupSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ath9k: Merge reset functionsSujith
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add MIC on TX and check on RXDavid Kilroy
Use the MIC algorithm from the crypto subsystem. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Process bulk of receive interrupt in a taskletDavid Kilroy
Read the packet data off the hardware and straight into an skb in the interrupt. We have to do this in case we don't process the tasklet in time. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Send association events to userspaceDavid Kilroy
Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add WE-18 ioctls for WPADavid Kilroy
Includes basic plumbing to get the data into firmware, and retrieve it. SIOCxIWGENIE simply record (and return) the IE, and do not act on it. SIOCxIWENCODEEXT, SIOCxIWAUTH and SIOCSIWMLME should be as functional as the driver will support. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Use a macro to define wireless handlersDavid Kilroy
The macro identifiers for the various ioctls required for WPA support are longer than those currently used by the driver. This makes it messy to keep line length below 80 character. By defining a macro to initialise the handler table, we recover the common text. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Split wevent work thread from wevent sendingDavid Kilroy
This allows us to send more wevents from the work thread. We will need to do this to support WPA. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Don't use boolean parameter to record encoding typeDavid Kilroy
For WPA support we need to encode NONE, WEP and TKIP in the encoding parameter. In anticipation of this we need to change the usage away from the current boolean usage. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Use extended Agere scans available on 9.x series firmwaresDavid Kilroy
This provides more information than the standard Agere scan, including the WPA IE. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: address checkpatch typedef warningDavid Kilroy
Just sprinkle the necessary structs around... Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Fix transmit for Agere/Lucent with fw 9.xDavid Kilroy
The tx control word has moved into the 802.11 header area on these firmwares. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Invoke firmware download in main driverDavid Kilroy
Firmware download is enabled for Agere in orinoco_cs. Symbol firmware download has been moved out of spectrum_cs into orinoco_cs. Firmware download is not enabled for Intersil. Symbol based firmware is restricted to only download on spectrum_cs based cards. The firmware names are hardcoded for each firmware type. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Extend hermes_dld routines for Agere firmwareDavid Kilroy
Add programming initialisation and termination functions. Add checks to avoid overrunning the firmware image or PDA areas. Extra algorithm to program PDA values using defaults where necessary. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Make firmware download logic more genericDavid Kilroy
Ensure PDA read is terminated. Prevent invalid programming blocks from causing reads outside the firmware image Turn off aux stuff when finished. Option to program in limited block sizes (controlled by macro). Option to read PDA from EEPROM. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Move firmware download functionality into new moduleDavid Kilroy
Move the functionality from spectrum_cs to hermes_dld in preparation for making it more generic and usable by other orinoco drivers. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add function to execute Hermes initialisation commands synchronouslyDavid Kilroy
The current synchronous execution function doesn't work for certain Hermes commands which clear the MAGIC number from SWSUPPORT0. These commands seem to be related to initialisation or programming, for example HERMES_CMD_INIT. Replicate hermes_docmd_wait for commands which clear the MAGIC number from SWSUPPORT0. This version accepts two extra arguments which are passed straight to the firmware. Functionality copied out of hermes_init. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Move EXPORT_SYMBOL declarations next to exported functionDavid Kilroy
Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Specify all three parameters to every Hermes command.David Kilroy
hermes_issue_cmd now takes two more parameters. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Update scan translationDavid Kilroy
Report channel, beacon interval and capabilities. Use WEXT defines instead of magic numbers. State quality stats in dB. Also a few changes to keep line length less than 80. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22orinoco: Add ESSID specific scanning for Agere fwDavid Kilroy
Pass the ESSID to the card. This allows 'iwlist eth1 scan essid <essid>' to work, and will help with routers setup not to broadcast the ESSID. Signed-off-by: David Kilroy <kilroyd@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22p54: rename prism54xyz -> p54xyzChristian Lamparter
It's been a long time, but fullmac prism54 driver is still around... I think we should rename every prism54* in order to avoid some confusion about "what is actually what" in the future ;-). Thanks-to: Maxi <maxi@daemonizer.de> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Add module parameter to disable HW cryptoIvo van Doorn
Add a module parameter to rt61 and rt73 to disable HW crypto. The option should only be checked when determining if the SUPPORT_HW_CRYPTO flag should be set or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Move lna_gain calculation to config() callbackIvo van Doorn
We can optimize lna calculation in IRQ context by calculating most of the value during the config() callback when most of the value is actually influenced. This will be required later by rt2800pci and rt2800usb as well, since they need the lna_gain value during config(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22ath5k: set short preamble flag for rxBruno Randolf
set the short preamble flag in ieee80211_rx_status for frames received with a short preamble. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Release rt2x00 2.2.0Ivo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Gather channel information in structureIvo van Doorn
Channel information which is read from EEPROM should be read into an array containing per-channel information. This removes the requirement of multiple arrays and makes the channel handling a bit cleaner and easier to expand. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22rt2x00: Implement HW encryption (rt73usb)Ivo van Doorn
rt73usb supports hardware encryption. rt73usb supports up to 4 shared keys and up to 64 pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 00:52:34 +0000