aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-07-12Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (183 commits) [TG3]: Update version to 3.78. [TG3]: Add missing NVRAM strapping. [TG3]: Enable auto MDI. [TG3]: Fix the polarity bit. [TG3]: Fix irq_sync race condition. [NET_SCHED]: ematch: module autoloading [TCP]: tcp probe wraparound handling and other changes [RTNETLINK]: rtnl_link: allow specifying initial device address [RTNETLINK]: rtnl_link API simplification [VLAN]: Fix MAC address handling [ETH]: Validate address in eth_mac_addr [NET]: Fix races in net_rx_action vs netpoll. [AF_UNIX]: Rewrite garbage collector, fixes race. [NETFILTER]: {ip, nf}_conntrack_sctp: fix remotely triggerable NULL ptr dereference (CVE-2007-2876) [NET]: Make all initialized struct seq_operations const. [UDP]: Fix length check. [IPV6]: Remove unneeded pointer idev from addrconf_cleanup(). [DECNET]: Another unnecessary net/tcp.h inclusion in net/dn.h [IPV6]: Make IPV6_{RECV,2292}RTHDR boolean options. [IPV6]: Do not send RH0 anymore. ... Fixed up trivial conflict in Documentation/feature-removal-schedule.txt manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Rename PC speaker code [MIPS] Don't use genrtc. [MIPS] Remove unused time.c for swarm [MIPS] Sparse: Use NULL for pointer [MIPS] Fix a sparse warning in arch/mips/pci/pci.c [MIPS] SMTC: Interrupt mask backstop hack [MIPS] separate platform_device registration for VR41xx RTC [MIPS] Separate platform_device registration for VR41xx GPIO [MIPS] MIPSsim: Fix build. [MIPS] separate platform_device registration for VR41xx serial interface [MIPS] Include cacheflush.h in uncache.c [MIPS] Cleanup tlbdebug.h [MIPS] Change names of local variables to silence sparse (part 2) [MIPS] Workaround for a sparse warning in include/asm-mips/io.h [MIPS] RM: Use only phyiscal address for 82596 and 53c710 [MIPS] Hydrogen3: Remove remaining bits of code. [MIPS] DEC: Fix modpost warning. Revert "[MIPS] DEC: Fix modpost warning." [MIPS] Fix resume for 64K page size on R4000 class processors.
2007-07-12Merge master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits) Blackfin serial driver: supporting BF548-EZKIT serial port Video Console: Blackfin doesnt support VGA console Blackfin arch: Add peripheral io API to gpio header file Blackfin arch: set up gpio interrupt IRQ_PJ9 for BF54x ATAPI PATA driver Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging Blackfin arch: as pointed out by Robert P. J. Day, update the CPU_FREQ name to match current Kconfig Blackfin arch: extract the entry point from the linked kernel Blackfin arch: clean up some coding style issues Blackfin arch: combine the common code of free_initrd_mem and free_initmem Blackfin arch: Add Support for Peripheral PortMux and resouce allocation Blackfin arch: use PAGE_SIZE when doing aligns rather than hardcoded values Blackfin arch: fix bug set dma_address properly in dma_map_sg Blackfin arch: Disable CACHELINE_ALIGNED_L1 for BF54x by default Blackfin arch: Port the dm9000 driver to Blackfin by using the correct low-level io routines Blackfin arch: There is no CDPRIO Bit in the EBIU_AMGCTL Register of BF54x arch Blackfin arch: scrub dead code Blackfin arch: Fix Warning add some defines in BF54x header file Blackfin arch: add BF54x missing GPIO access functions Blackfin arch: Some memory and code optimizations - Fix SYS_IRQS Blackfin arch: Enable BF54x PIN/GPIO interrupts ...
2007-07-12Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (26 commits) i2c-rpx: Remove i2c-mpc: work around missing-9th-clock-pulse bug i2c: New PMC MSP71xx TWI bus driver i2c-savage4: Delete many unused defines i2c/tsl2550: Speed up initialization i2c: New bus driver for the TAOS evaluation modules i2c-i801: Use the internal 32-byte buffer on ICH4+ i2c-i801: Various cleanups i2c: Add support for the TSL2550 i2c-pxa: Support new-style I2C drivers i2c-gpio: Make some internal functions static i2c-gpio: Add support for new-style clients i2c-iop3xx: Switch to static adapter numbering i2c-sis5595: Resolve resource conflict with sis5595 matroxfb: Clean-up i2c header inclusions i2c-nforce2: Add support for SMBus block transactions i2c-mpc: Use i2c_add_numbered_adapter i2c-mv64xxx: Use i2c_add_numbered_adapter i2c-piix4: Add support for the ATI SB700 i2c: New DS1682 chip driver ...
2007-07-12hd.c: remove BIOS/CMOS queriesH. Peter Anvin
An ST-506 disk these days is pretty much someone trying to pull ancient data using an auxilliary controller. Pulling data from the BIOS or CMOS is just plain wrong, since it's likely to be the primary OS disk... and would be user-entered data anyway. Instead, require the user enters it on the command line. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12[MIPS] Don't use genrtc.Ralf Baechle
The only pseudo-legitimate MIPS user of genrtc was a systems that doesn't have an RTC in hardware at all. At this point faking one is a little pointless ...
2007-07-12[MIPS] separate platform_device registration for VR41xx RTCYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12[MIPS] Separate platform_device registration for VR41xx GPIOYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12[MIPS] separate platform_device registration for VR41xx serial interfaceYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12[MIPS] DEC: Fix modpost warning.Ralf Baechle
LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map MODPOST vmlinux WARNING: drivers/built-in.o(.data+0x2480): Section mismatch: reference to .init.text: (between 'sercons' and 'ds_parms') Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12Revert "[MIPS] DEC: Fix modpost warning."Ralf Baechle
This reverts commit 8713762acf341edea9d25d6a4817f235c67bc004.
2007-07-12i2c-rpx: RemoveJean Delvare
This driver has been broken forever. It depends on i2c-algo-8xx which has never been in the mainline kernel. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-mpc: work around missing-9th-clock-pulse bugDomen Puncer
Work around a problem reported on: http://ozlabs.org/pipermail/linuxppc-embedded/2005-July/019038.html Without this patch I2C on mpc5200 becomes unusable after a while. Tested on mpc5200 boards by Matthias Fechner and me. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: New PMC MSP71xx TWI bus driverMarc St-Jean
Add TWI driver for the PMC-Sierra MSP71xx devices. [JD: Drop the probe hack, don't set algo_data as we never use it, return the right error code if the driver registration fails.] Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-savage4: Delete many unused definesJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c/tsl2550: Speed up initializationJean Delvare
There's some redundancy in the tsl2550 initialization sequence. It is powering up the device twice, and setting the operating mode twice too. Setting things just once saves SMBus transactions, which aren't always cheap, speeding up the device initialization. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@linux.it>
2007-07-12i2c: New bus driver for the TAOS evaluation modulesJean Delvare
This is a new I2C bus driver for the TAOS evaluation modules. Developped and tested on the TAOS TSL2550 EVM. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-i801: Use the internal 32-byte buffer on ICH4+Oleg Ryjkov
Add an ability to utilize the internal SRAM buffer on ICH4 and newer host controllers to speed up execution of block operations. I've split the code so that it is more clear which block transaction is performed. First of all the host controller's type is identified. isich4 is set when we think that the controller has the internal buffer. Then, before every block transaction, if isich4 is set, we attempt to enable the E32B bit in SMBAUXCTL register. Signed-off-by: Oleg Ryjkov <olegr@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-i801: Various cleanupsOleg Ryjkov
* Use defines instead of raw numbers for register bits * Fix several wrong indentations and trailing whitespace * Move hwpec timeout checking to a separate function Signed-off-by: Oleg Ryjkov <olegr@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Add support for the TSL2550Rodolfo Giometti
Add support for Taos TSL2550 ambient light sensors. (http://www.taosinc.com/product_detail.asp?cateid=4&proid=18). Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-pxa: Support new-style I2C driversRodolfo Giometti
Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-gpio: Make some internal functions staticAtsushi Nemoto
i2c_gpio_getsda() and i2c_gpio_getscl() are only used in this file. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-gpio: Add support for new-style clientsAtsushi Nemoto
Use i2c_bit_add_numbered_bus() so that the i2c-gpio adapter works well with new-style pre-declared devices. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-iop3xx: Switch to static adapter numberingMartin Michlmayr
Update the IOP3xx I2C driver to use i2c_add_numbered_adapter(), so that later patches can convert boards to using new-style drivers. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Tested-by: Voipio Riku <Riku.Voipio@movial.fi> Cc: Dan J Williams <dan.j.williams@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-sis5595: Resolve resource conflict with sis5595Jean Delvare
Let the i2c-sis5595 driver release its PCI device after registering. This is to allow the sis5595 hardware monitoring driver to also access this PCI device. The same trick is already used in the i2c-viapro and via686a drivers to let them both load. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12matroxfb: Clean-up i2c header inclusionsJean Delvare
matroxfb_crtc2 has nothing to do with i2c, so there's no reason why matroxfb_crtc2.h should include i2c header files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz>
2007-07-12i2c-nforce2: Add support for SMBus block transactionsOleg Ryjkov
Add support for SMBus block read/write transactions to i2c-nforce2 driver, in particular to host controllers MCP51 and MCP55. Signed-off-by: Oleg Ryjkov <olegr@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-mpc: Use i2c_add_numbered_adapterGrant Likely
Move the i2c-mpc driver over to using the new i2c infrastructure. Specifically, it now uses i2c_add_numbered_adapter so that the bus number can be determined ahead of time and used to register i2c clients before the bus is instantiated. Tested on an MPC5200 based board Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-mv64xxx: Use i2c_add_numbered_adapterDale Farnsworth
Convert the Marvell mv64xxx I2C driver to use the new i2c infrastructure, by calling i2c_add_numbered_adapter(). This allows clients to be registered before the bus is instantiated. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-piix4: Add support for the ATI SB700Henry Su
Add the SMBus device ID for ATI SB700. Signed-off-by: Henry Su <Henry.su@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: New DS1682 chip driverGrant Likely
A driver for the Dallas DS1682 elapsed time recorder chip. Tested on a MPC5200 based board using the integrated i2c adapter. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Fix the i2c_smbus_read_i2c_block_data() prototypeJean Delvare
Let the drivers specify how many bytes they want to read with i2c_smbus_read_i2c_block_data(). So far, the block count was hard-coded to I2C_SMBUS_BLOCK_MAX (32), which did not make much sense. Many driver authors complained about this before, and I believe it's about time to fix it. Right now, authors have to do technically stupid things, such as individual byte reads or full-fledged I2C messaging, to work around the problem. We do not want to encourage that. I even found that some bus drivers (e.g. i2c-amd8111) already implemented I2C block read the "right" way, that is, they didn't follow the old, broken standard. The fact that it was never noticed before just shows how little i2c_smbus_read_i2c_block_data() was used, which isn't that surprising given how broken its prototype was so far. There are some obvious compatiblity considerations: * This changes the i2c_smbus_read_i2c_block_data() prototype. Users outside the kernel tree will notice at compilation time, and will have to update their code. * User-space has access to i2c_smbus_xfer() directly using i2c-dev, so the changed expectations would affect tools such as i2cdump. In order to preserve binary compatibility, we give I2C_SMBUS_I2C_BLOCK_DATA a new numeric value, and define I2C_SMBUS_I2C_BLOCK_BROKEN with the old numeric value. When i2c-dev receives a transaction with the old value, it can convert it to the new format on the fly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Deprecate legacy RTC driversJean Delvare
We have a new RTC subsystem with better drivers. Legacy driver status: * ds1337: The DS1337 and DS1339 are now supported by the rtc-ds1307 driver, so it looks to me like we could even delete the ds1337 driver right away. * ds1374: Will soon be replaced with Scott Wood's rtc-ds1374 driver. * m41t00: The M41T00 is supported by the rtc-ds1307 driver. For the M41T81 and M41T85, the rtc-m41t80 driver written by Atsushi Nemoto should work. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Mark A. Greer <mgreer@mvista.com> Acked-by: James Chapman <jchapman@katalix.com> Cc: Randy Vinson <rvinson@mvista.com>
2007-07-12i2c: Delete outdated x1205 driver documentationJean Delvare
The x1205 driver moved to the RTC subsystem and was significantly modified since then, so just delete the outdated documentation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
2007-07-12scx200_acb: Use mutex instead of semaphoreMatthias Kaehlcke
The scx200_acb driver use a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Add kernel documentationDavid Brownell
Generate I2C kerneldoc; fix various glitches and add "context" sections to that documentation. Most I2C and SMBus functions still have no kerneldoc. Let me suggest providing kerneldoc for all the i2c_smbus_*() functions as a small and mostly self-contained project for anyone so inclined. :) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12Blackfin serial driver: supporting BF548-EZKIT serial portRoy Huang
Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Video Console: Blackfin doesnt support VGA consoleMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin arch: Port the dm9000 driver to Blackfin by using the correct ↵Alex Landau
low-level io routines Signed-off-by: Alex Landau <landau.alex@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-11[TG3]: Update version to 3.78.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[TG3]: Add missing NVRAM strapping.Matt Carlson
This patch adds a missing NVRAM strapping for 5755 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[TG3]: Enable auto MDI.Matt Carlson
This patch adds automatic MDI crossover support when autonegotiation is turned off. Automatic MDI crossover allows link to be established without the use of a crossover cable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[TG3]: Fix the polarity bit.Matt Carlson
For most pre-5705 devices, multiple link interrupts were being generated for a single physical link change. The source of the interrupts was determined to be unnecessary toggling of the MAC link polarity bit. This patch changes the way the link polarity bit gets configured. Where possible, code that dynamically configures the bit in response to link changes has been replaced by code that configures the bit once during initialization time and then leaves the bit alone. For correctness, this patch also limits the use of the bit to those devices where it is defined, namely devices before the 5705. This patch also corrects the link polarity configurations for 5700 devices when paired against a bcm5411 phy. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[TG3]: Fix irq_sync race condition.Michael Chan
Gagan Arneja <gaagaan@gmail.com> pointed out that tg3_reset_task() could potentially race with another thread calling tg3_full_lock() such as the ethtool_set_xxx() functions. This may trigger the BUG_ON() in tg3_irq_quiesce() or cause the irq_sync flag to be out- of-sync. I think the easiest way to fix this is to get the tp->lock first before setting the irq_sync flag. This is safe to do because the tp->lock is never grabbed by the irq handler. This change will guarantee that the irq_sync flag updates will be serialized. We also have to change one spot to call tg3_netif_start() (which clears the irq_sync flag) before releasing the tp->lock. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[RTNETLINK]: rtnl_link: allow specifying initial device addressPatrick McHardy
Drivers need to validate the initial addresses in their netlink attribute validation function or manually reject them if they can't support this. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[RTNETLINK]: rtnl_link API simplificationPatrick McHardy
All drivers need to unregister their devices in the module unload function. While doing so they must hold the rtnl and atomically unregister the rtnl_link ops as well. This makes the rtnl_link_unregister function that takes the rtnl itself completely useless. Provide default newlink/dellink functions, make __rtnl_link_unregister and rtnl_link_unregister unregister all devices with matching rtnl_link_ops and change the existing users to take advantage of that. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11Merge master.kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6David S. Miller
2007-07-10[IRDA]: use mutex instead of semaphore in VLSI 82C147 IrDA controller driverMatthias Kaehlcke
The VLSI 82C147 IrDA controller driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Seems to not need net/tcp.hIlpo Järvinen
Got bored to always recompile it for no reason. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[BNX2]: Update version to 1.6.2.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-15 16:37:51 +0000