aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-05mlx4_core: Distinguish multiple devices in /proc/interruptsArputham Benjamin
When the mlx4 driver uses the same name for interrupts for every device in the system. This can make it very confusing trying to work out exactly which device MSI-X interrupts are for. Change the driver to add the PCI name of the device to the interrupt name. Signed-off-by: Arputham Benjamin <abenjamin@sgi.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Avoid double free_icmsYevgeny Petrilin
On the error path of mlx4_init_hca(), mlx4_close_hca() is called, followed by mlx4_free_icms() and mlx4_UNMAP_FA(). But both those functions are also called from mlx4_close_hca(), which leads to a double free. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Allocate and map sufficient ICM memory for EQ contextRoland Dreier
The current implementation allocates a single host page for EQ context memory, which was OK when we only allocated a few EQs. However, since we now allocate an EQ for each CPU core, this patch removes the hard-coded limit (which we exceed with 4 KB pages and 128 byte EQ context entries with 32 CPUs) and uses the same ICM table code as all other context tables, which ends up simplifying the code quite a bit while fixing the problem. This problem was actually hit in practice on a dual-socket Nehalem box with 16 real hardware threads and sufficiently odd ACPI tables that it shows on boot SMP: Allowing 32 CPUs, 16 hotplug CPUs so num_possible_cpus() ends up 32, and mlx4 ends up creating 33 MSI-X interrupts and 33 EQs. This mlx4 bug means that mlx4 can't even initialize at all on this quite mainstream system. Cc: <stable@kernel.org> Reported-by: Eli Cohen <eli@mellanox.co.il> Tested-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05IB/mlx4: Annotate CQ lockingRoland Dreier
mlx4_ib_lock_cqs()/mlx4_ib_unlock_cqs() are helper functions that lock/unlock both CQs attached to a QP in the proper order to avoid AB-BA deadlocks. Annotate this so sparse can understand what's going on (and warn us if we misuse these functions). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Remove unnecessary includes of <linux/init.h>Roland Dreier
Lots of mlx4 files with no function annotations included <linux/init.h> for no reason. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05mlx4_core: Use pci_request_regions()Roland Dreier
The old code used two calls to pci_request_region() to get the two BARs for the mlx4 device, for no particularly good reason. Clean up the code a little by converting this to a single call to pci_request_regions(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix freeing of unallocated memory firewire: ohci: fix Ricoh R5C832, video reception firewire: ohci: fix Agere FW643 and multiple cameras firewire: core: fix crash in iso resource management
2009-09-05Merge git://git.infradead.org/~dwmw2/mtd-2.6.31Linus Torvalds
* git://git.infradead.org/~dwmw2/mtd-2.6.31: JFFS2: add missing verify buffer allocation/deallocation mtd: nftl: fix offset alignments mtd: nftl: write support is broken mtd: m25p80: fix null pointer dereference bug
2009-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tc: Fix unitialized kernel memory leak pkt_sched: Revert tasklet_hrtimer changes. net: sk_free() should be allowed right after sk_alloc() gianfar: gfar_remove needs to call unregister_netdev() ipw2200: firmware DMA loading rework
2009-09-05Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Re-enable cpufreq suspend and resume code
2009-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm snapshot: fix on disk chunk size validation dm exception store: split set_chunk_size dm snapshot: fix header corruption race on invalidation dm snapshot: refactor zero_disk_area to use chunk_io dm log: userspace add luid to distinguish between concurrent log instances dm raid1: do not allow log_failure variable to unset after being set dm log: remove incorrect field from userspace table output dm log: fix userspace status output dm stripe: expose correct io hints dm table: add more context to terse warning messages dm table: fix queue_limit checking device iterator dm snapshot: implement iterate devices dm multipath: fix oops when request based io fails when no paths
2009-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI SR-IOV: correct broken resource alignment calculations
2009-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atkbd - add Compaq Presario R4000-series repeat quirk Input: i8042 - add Acer Aspire 5536 to the nomux list
2009-09-05pty: don't limit the writes to 'pty_space()' inside 'pty_write()'Linus Torvalds
The whole write-room thing is something that is up to the _caller_ to worry about, not the pty layer itself. The total buffer space will still be limited by the buffering routines themselves, so there is no advantage or need in having pty_write() artificially limit the size somehow. And what happened was that the caller (the n_tty line discipline, in this case) may have verified that there is room for 2 bytes to be written (for NL -> CRNL expansion), and it used to then do those writes as two single-byte writes. And if the first byte written (CR) then caused a new tty buffer to be allocated, pty_space() may have returned zero when trying to write the second byte (LF), and then incorrectly failed the write - leading to a lost newline character. This should finally fix http://bugzilla.kernel.org/show_bug.cgi?id=14015 Reported-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-05n_tty: do O_ONLCR translation as a single writeLinus Torvalds
When translating CR to CRNL in the n_tty line discipline, we did it as two tty_put_char() calls. Which works, but is stupid, and has caused problems before too with bad interactions with the write_room() logic. The generic USB serial driver had that problem, for example. Now the pty layer had similar issues after being moved to the generic tty buffering code (in commit d945cb9cce20ac7143c2de8d88b187f62db99bdc: "pty: Rework the pty layer to use the normal buffering logic"). So stop doing the silly separate two writes, and do it as a single write instead. That's what the n_tty layer already does for the space expansion of tabs (XTABS), and it means that we'll now always have just a single write for the CRNL to match the single 'tty_write_room()' test, which hopefully means that the next time somebody screws up buffering, it won't cause weeks of debugging. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-05firewire: sbp2: fix freeing of unallocated memoryStefan Richter
If a target writes invalid status (typically status of a command that already timed out), firewire-sbp2 attempts to put away an ORB that doesn't exist. https://bugzilla.redhat.com/show_bug.cgi?id=519772 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: ohci: fix Ricoh R5C832, video receptionStefan Richter
In dual-buffer DMA mode, no video frames are ever received from R5C832 by libdc1394. Fallback to packet-per-buffer DMA works reliably. http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13393/focus=13476 Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: ohci: fix Agere FW643 and multiple camerasStefan Richter
An Agere FW643 OHCI 1.1 card works fine for video reception from one camera but fails early if receiving from two cameras. After a short while, no IR IRQ events occur and the context control register does not react anymore. This happens regardless whether both IR DMA contexts are dual-buffer or one is dual-buffer and the other packet-per-buffer. This can be worked around by disabling dual buffer DMA mode entirely. http://sourceforge.net/mailarchive/message.php?msg_name=4A7C0594.2020208%40gmail.com (Reported by Samuel Audet.) In another report (by Jonathan Cameron), an FW643 works OK with two cameras in dual buffer mode. Whether this is due to different chip revisions or different usage patterns (different video formats) is not yet clear. However, as far as the current capabilities of firewire-core's isochronous I/O interface are concerned, simply switching off dual-buffer on non-working and working FW643s alike is not a problem in practice. We only need to revisit this issue if we are going to enhance the interface, e.g. so that applications can explicitly choose modes. Reported-by: Samuel Audet <samuel.audet@gmail.com> Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: core: fix crash in iso resource managementStefan Richter
This fixes a regression due to post 2.6.30 commit "firewire: core: do not DMA-map stack addresses" 6fdc03709433ccc2005f0f593ae9d9dd04f7b485. As David Moore noted, a previously correct sizeof() expression became wrong since the commit changed its argument from an array to a pointer. This resulted in an oops in ohci_cancel_packet in the shared workqueue thread's context when an isochronous resource was to be freed. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-04dm snapshot: fix on disk chunk size validationMikulas Patocka
Fix some problems seen in the chunk size processing when activating a pre-existing snapshot. For a new snapshot, the chunk size can either be supplied by the creator or a default value can be used. For an existing snapshot, the chunk size in the snapshot header on disk should always be used. If someone attempts to load an existing snapshot and has the 'default chunk size' option set, the kernel uses its default value even when it is incorrect for the snapshot being loaded. This patch ensures the correct on-disk value is always used. Secondly, when the code does use the chunk size stored on the disk it is prudent to revalidate it, so the code can exit cleanly if it got corrupted as happened in https://bugzilla.redhat.com/show_bug.cgi?id=461506 . Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm exception store: split set_chunk_sizeMikulas Patocka
Break the function set_chunk_size to two functions in preparation for the fix in the following patch. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm snapshot: fix header corruption race on invalidationMikulas Patocka
If a persistent snapshot fills up, a race can corrupt the on-disk header which causes a crash on any future attempt to activate the snapshot (typically while booting). This patch fixes the race. When the snapshot overflows, __invalidate_snapshot is called, which calls snapshot store method drop_snapshot. It goes to persistent_drop_snapshot that calls write_header. write_header constructs the new header in the "area" location. Concurrently, an existing kcopyd job may finish, call copy_callback and commit_exception method, that goes to persistent_commit_exception. persistent_commit_exception doesn't do locking, relying on the fact that callbacks are single-threaded, but it can race with snapshot invalidation and overwrite the header that is just being written while the snapshot is being invalidated. The result of this race is a corrupted header being written that can lead to a crash on further reactivation (if chunk_size is zero in the corrupted header). The fix is to use separate memory areas for each. See the bug: https://bugzilla.redhat.com/show_bug.cgi?id=461506 Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm snapshot: refactor zero_disk_area to use chunk_ioMikulas Patocka
Refactor chunk_io to prepare for the fix in the following patch. Pass an area pointer to chunk_io and simplify zero_disk_area to use chunk_io. No functional change. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm log: userspace add luid to distinguish between concurrent log instancesJonathan Brassow
Device-mapper userspace logs (like the clustered log) are identified by a universally unique identifier (UUID). This identifier is used to associate requests from the kernel to a specific log in userspace. The UUID must be unique everywhere, since multiple machines may use this identifier when communicating about a particular log, as is the case for cluster logs. Sometimes, device-mapper/LVM may re-use a UUID. This is the case during pvmoves, when moving from one segment of an LV to another, or when resizing a mirror, etc. In these cases, a new log is created with the same UUID and loaded in the "inactive" slot. When a device-mapper "resume" is issued, the "live" table is deactivated and the new "inactive" table becomes "live". (The "inactive" table can also be removed via a device-mapper 'clear' command.) The above two issues were colliding. More than one log was being created with the same UUID, and there was no way to distinguish between them. So, sometimes the wrong log would be swapped out during the exchange. The solution is to create a locally unique identifier, 'luid', to go along with the UUID. This new identifier is used to determine exactly which log is being referenced by the kernel when the log exchange is made. The identifier is not universally safe, but it does not need to be, since create/destroy/suspend/resume operations are bound to a specific machine; and these are the operations that make up the exchange. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm raid1: do not allow log_failure variable to unset after being setJonathan Brassow
This patch fixes a bug which was triggering a case where the primary leg could not be changed on failure even when the mirror was in-sync. The case involves the failure of the primary device along with the transient failure of the log device. The problem is that bios can be put on the 'failures' list (due to log failure) before 'fail_mirror' is called due to the primary device failure. Normally, this is fine, but if the log device failure is transient, a subsequent iteration of the work thread, 'do_mirror', will reset 'log_failure'. The 'do_failures' function then resets the 'in_sync' variable when processing bios on the failures list. The 'in_sync' variable is what is used to determine if the primary device can be switched in the event of a failure. Since this has been reset, the primary device is incorrectly assumed to be not switchable. The case has been seen in the cluster mirror context, where one machine realizes the log device is dead before the other machines. As the responsibilities of the server migrate from one node to another (because the mirror is being reconfigured due to the failure), the new server may think for a moment that the log device is fine - thus resetting the 'log_failure' variable. In any case, it is inappropiate for us to reset the 'log_failure' variable. The above bug simply illustrates that it can actually hurt us. Cc: stable@kernel.org Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm log: remove incorrect field from userspace table outputJonathan Brassow
The output of 'dmsetup table' includes an internal field that should not be there. This patch removes it. To make the fix simpler, we first reorder a constructor argument The 'device size' argument is generated internally. Currently it is placed as the last space-separated word of the constructor string. However, we need to use a version of the string without this word, so we move it to the beginning instead so it is trivial to skip past it. We keep a copy of the arguments passed to userspace for creating a log, just in case we need to resend them. These are the same arguments that are desired in the STATUSTYPE_TABLE request, except for one. When creating the userspace log, the userspace daemon must know the size of the mirror, so that is added to the arguments given in the constructor table. We were printing this extra argument out as well, which is a mistake. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm log: fix userspace status outputJonathan Brassow
Fix 'dmsetup table' output. There is a missing ' ' at the end of the string causing two words to run together. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm stripe: expose correct io hintsMike Snitzer
Set sensible I/O hints for striped DM devices in the topology infrastructure added for 2.6.31 for userspace tools to obtain via sysfs. Add .io_hints to 'struct target_type' to allow the I/O hints portion (io_min and io_opt) of the 'struct queue_limits' to be set by each target and implement this for dm-stripe. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm table: add more context to terse warning messagesMike Snitzer
A couple of recent warning messages make it difficult for the reader to determine exactly what is wrong. This patch adds more information to those messages. The messages were added by these commits: 5dea271b6d87bd1d79a59c1d5baac2596a841c37 ("dm table: pass correct dev area size to device_area_is_valid") ea9df47cc92573b159ef3b4fda516c32cba9c4fd ("dm table: fix blk_stack_limits arg to use bytes not sectors") The patch also corrects references to logical_block_size in printk format strings from %hu to %u. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm table: fix queue_limit checking device iteratorMikulas Patocka
The logic to check for valid device areas is inverted relative to proper use with iterate_devices. The iterate_devices method calls its callback for every underlying device in the target. If any callback returns non-zero, iterate_devices exits immediately. But the callback device_area_is_valid() returns 0 on error and 1 on success. The overall effect without is that an error is issued only if every device is invalid. This patch renames device_area_is_valid to device_area_is_invalid and inverts the logic so that one invalid device is sufficient to raise an error. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm snapshot: implement iterate devicesMike Snitzer
Implement the .iterate_devices for the origin and snapshot targets. dm-snapshot's lack of .iterate_devices resulted in the inability to properly establish queue_limits for both targets. With 4K sector drives: an unfortunate side-effect of not establishing proper limits in either targets' DM device was that IO to the devices would fail even though both had been created without error. Commit af4874e03ed82f050d5872d8c39ce64bf16b5c38 ("dm target:s introduce iterate devices fn") in 2.6.31-rc1 should have implemented .iterate_devices for dm-snap.c's origin and snapshot targets. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm multipath: fix oops when request based io fails when no pathsKiyoshi Ueda
The patch posted at http://marc.info/?l=dm-devel&m=124539787228784&w=2 which was merged into cec47e3d4a861e1d942b3a580d0bbef2700d2bb2 ("dm: prepare for request based option") introduced a regression in request-based dm. If map_request() calls dm_kill_unmapped_request() to complete a cloned bio without dispatching it, clone->bio is still set when dm_end_request() is called and the BUG_ON(clone->bio) is incorrect. The patch fixes this bug by freeing bio in dm_end_request() if the clone has bio. I've redone my tests to cover all I/O paths and confirmed there's no other regression. Here is the oops I hit in request-based dm when I do I/O to a multipath device which doesn't have any active path nor queue_if_no_path setting: ------------[ cut here ]------------ kernel BUG at /root/2.6.31-rc4.rqdm/drivers/md/dm.c:828! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq dm_mirror dm_region_hash dm_log dm_service_time dm_multipath scsi_dh dm_mod video output sbs sbshc battery ac sg sr_mod e1000e button cdrom serio_raw rtc_cmos rtc_core rtc_lib piix lpfc scsi_transport_fc ata_piix libata megaraid_sas sd_mod scsi_mod crc_t10dif ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode] Pid: 7, comm: ksoftirqd/1 Not tainted 2.6.31-rc4.rqdm #1 Express5800/120Lj [N8100-1417] RIP: 0010:[<ffffffffa023629d>] [<ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod] RSP: 0018:ffff8800280a1f08 EFLAGS: 00010282 RAX: ffffffffa02544e0 RBX: ffff8802aa1111d0 RCX: ffff8802aa1111e0 RDX: ffff8802ab913e70 RSI: 0000000000000000 RDI: ffff8802ab913e70 RBP: ffff8800280a1f28 R08: ffffc90005457040 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffb R13: ffff8802ab913e88 R14: ffff8802ab9c1438 R15: 0000000000000100 FS: 0000000000000000(0000) GS:ffff88002809e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000003d54a98640 CR3: 000000029f0a1000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ksoftirqd/1 (pid: 7, threadinfo ffff8802ae50e000, task ffff8802ae4f8040) Stack: ffff8800280a1f38 0000000000000020 ffffffff814f30a0 0000000000000004 <0> ffff8800280a1f58 ffffffff8116b245 ffff8800280a1f38 ffff8800280a1f38 <0> ffff8800280a1f58 0000000000000001 ffff8800280a1fa8 ffffffff810477bc Call Trace: <IRQ> [<ffffffff8116b245>] blk_done_softirq+0x75/0x90 [<ffffffff810477bc>] __do_softirq+0xcc/0x210 [<ffffffff81047170>] ? ksoftirqd+0x0/0x110 [<ffffffff8100ce7c>] call_softirq+0x1c/0x50 <EOI> [<ffffffff8100e785>] do_softirq+0x65/0xa0 [<ffffffff81047170>] ? ksoftirqd+0x0/0x110 [<ffffffff810471e0>] ksoftirqd+0x70/0x110 [<ffffffff81059559>] kthread+0x99/0xb0 [<ffffffff8100cd7a>] child_rip+0xa/0x20 [<ffffffff8100c73c>] ? restore_args+0x0/0x30 [<ffffffff810594c0>] ? kthread+0x0/0xb0 [<ffffffff8100cd70>] ? child_rip+0x0/0x20 Code: 44 89 e6 48 89 df e8 23 fb f2 e0 be 01 00 00 00 4c 89 f7 e8 f6 fd ff ff 5b 41 5c 41 5d 41 5e c9 c3 4c 89 ef e8 85 fe ff ff eb ed <0f> 0b eb fe 41 8b 85 dc 00 00 00 48 83 bb 10 01 00 00 00 89 83 RIP [<ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod] RSP <ffff8800280a1f08> ---[ end trace 16af0a1d8542da55 ]--- Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-03Input: atkbd - add Compaq Presario R4000-series repeat quirkDave Andrews
Compaq Presario R4000-series laptops are not sending a "volume up button release" and "volume down button release" signal in the PS/2 protocol for atkbd. The URL below has some of confirmed reports: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/385477 Signed-off-by: Dave Andrews <jetdog330@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-03mtd: nftl: fix offset alignmentsDimitri Gorokhovik
Arithmetic conversion in the mask computation makes the upper word of the second argument passed down to mtd->read_oob(), be always 0 (assuming 'offs' being a 64-bit signed long long type, and 'mtd->writesize' being a 32-bit unsigned int type). This patch applies over the other one adding masking in nftl_write, "nftl: write support is broken". Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Scott James Remnant <scott@canonical.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03mtd: nftl: write support is brokenDimitri Gorokhovik
Write support is broken in NFTL. Fix it. Signed-off-by: <dimitri.gorokhovik@free.fr> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Scott James Remnant <scott@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03mtd: m25p80: fix null pointer dereference bugAnton Vorontsov
This patch fixes the following oops, observed with MTD_PARTITIONS=n: m25p80 spi32766.0: m25p80 (1024 Kbytes) Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xc03a54b0 Oops: Kernel access of bad area, sig: 11 [#1] Modules linked in: NIP: c03a54b0 LR: c03a5494 CTR: c01e98b8 REGS: ef82bb60 TRAP: 0300 Not tainted (2.6.31-rc4-00167-g4733fd3) MSR: 00029000 <EE,ME,CE> CR: 24022022 XER: 20000000 DEAR: 00000008, ESR: 00000000 TASK = ef82c000[1] 'swapper' THREAD: ef82a000 GPR00: 00000000 ef82bc10 ef82c000 0000002e 00001eb8 ffffffff c01e9824 00000036 GPR08: c054ed40 c0542a08 00001eb8 00004000 22022022 1001a1a0 3ff8fd00 00000000 GPR16: 00000000 00000001 00000000 00000000 ef82bddc c0530000 efbef500 ef8356d0 GPR24: 00000000 ef8356d0 00000000 efbf7a00 c0530ec4 ffffffed efbf5300 c0541f98 NIP [c03a54b0] m25p_probe+0x22c/0x354 LR [c03a5494] m25p_probe+0x210/0x354 Call Trace: [ef82bc10] [c03a5494] m25p_probe+0x210/0x354 (unreliable) [ef82bca0] [c024e37c] spi_drv_probe+0x2c/0x3c [ef82bcb0] [c01f1afc] driver_probe_device+0xa4/0x178 [ef82bcd0] [c01f06e8] bus_for_each_drv+0x6c/0xa8 [ef82bd00] [c01f1a34] device_attach+0x84/0xa8 ... Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-01[CPUFREQ] Re-enable cpufreq suspend and resume codeDominik Brodowski
Commit 4bc5d3413503 is broken and causes regressions: (1) cpufreq_driver->resume() and ->suspend() were only called on __powerpc__, but you could set them on all architectures. In fact, ->resume() was defined and used before the PPC-related commit 42d4dc3f4e1e complained about in 4bc5d3413503. (2) Therfore, the resume functions in acpi_cpufreq and speedstep-smi would never be called. (3) This means speedstep-smi would be unusuable after suspend or resume. The _real_ problem was calling cpufreq_driver->get() with interrupts off, but it re-enabling interrupts on some platforms. Why is ->get() necessary? Some systems like to change the CPU frequency behind our back, especially during BIOS-intensive operations like suspend or resume. If such systems also use a CPU frequency-dependant timing loop, delays might be off by large factors. Therefore, we need to ascertain as soon as possible that the CPU frequency is indeed at the speed we think it is. You can do this two ways: either setting it anew, or trying to get it. The latter is what was done, the former also has the same IRQ issue. So, let's try something different: defer the checking to after interrupts are re-enabled, by calling cpufreq_update_policy() (via schedule_work()). Timings may be off until this later stage, so let's watch out for resume regressions caused by the deferred handling of frequency changes behind the kernel's back. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2009-08-31Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name style V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors. V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is true V4L/DVB (12457): zr364: wrong indexes V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfaces V4L/DVB (12450): Siano: Fixed SDIO compilation bugs V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xx V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devices
2009-08-31ata_piix: parallel scanning on PATA needs an extra lockingBartlomiej Zolnierkiewicz
Commit log for commit 517d3cc15b36392e518abab6bacbb72089658313 ("[libata] ata_piix: Enable parallel scan") says: This patch turns on parallel scanning for the ata_piix driver. This driver is used on most netbooks (no AHCI for cheap storage it seems). The scan is the dominating time factor in the kernel boot for these devices; with this flag it gets cut in half for the device I used for testing (eeepc). Alan took a look at the driver source and concluded that it ought to be safe to do for this driver. Alan has also checked with the hardware team. and it is all true but once we put all things together additional constraints for PATA controllers show up (some hardware registers have per-host not per-port atomicity) and we risk misprogramming the controller. I used the following test to check whether the issue is real: @@ -736,8 +736,20 @@ static void piix_set_piomode(struct ata_ (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); - if (is_slave) + if (is_slave) { + if (ap->port_no == 0) { + u8 tmp = slave_data; + + while (slave_data == tmp) { + pci_read_config_byte(dev, slave_port, &tmp); + msleep(50); + } + + dev_printk(KERN_ERR, &dev->dev, "PATA parallel scan " + "race detected\n"); + } pci_write_config_byte(dev, slave_port, slave_data); + } /* Ensure the UDMA bit is off - it will be turned back on if UDMA is selected */ and it indeed triggered the error message. Lets fix all such races by adding an extra locking to ->set_piomode and ->set_dmamode methods for PATA controllers. [ Alan: would be better to take the host lock in libata-core for these cases so that we fix all the adapters in one swoop. "Looks fine as a temproary quickfix tho" ] Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Improve CRTDDC mapping by using VBT info drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU. drm/i915: Set crtc/clone mask in different output devices drm/i915: Always use SDVO_B detect bit for SDVO output detection. drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder() drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx drm/i915: Set the multiplier for SDVO on G33 platform
2009-08-31V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors.Randy Dunlap
Reported-by: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is trueShine Liu
We should call em28xx_ir_init(dev) only when disable_ir is true. Signed-off-by: Shine Liu <shinel@foxmail.com> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12457): zr364: wrong indexesRoel Kluin
The order of indexes is reversed Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfacesUdi Atar
Update KConfig file to enbale selection of SDIO and USB interfaces, and add dependancy on relevant modules. [mchehab@redhat.com: fix merge conflicts, remove default: m, add missing endmenu] Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12450): Siano: Fixed SDIO compilation bugsUdi Atar
Fixed SDIO compilation bugs Also fixed a memory overrun issue in buffer management. Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xxMauro Carvalho Chehab
[mchehab@redhat.com: fix merge conflict and a few CodingStyle issues] Signed-off-by: Steve Gotthardt <gotthardt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devicesMichael Krufky
Previous changesets broke Hauppauge devices and their GPIO configurations. This changeset restores the LED & LNA functionality. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-30gianfar: gfar_remove needs to call unregister_netdev()Toru UCHIYAMA
This patch solves the problem that the Oops(BUG_ON) occurs by rmmod. # rmmod gianfar_driver ------------[ cut here ]------------ Kernel BUG at c01fec48 [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC837x MDS Modules linked in: gianfar_driver(-) usb_storage scsi_wait_scan NIP: c01fec48 LR: c01febf4 CTR: c01feba8 REGS: dec5bd60 TRAP: 0700 Tainted: G W (2.6.31-rc2) MSR: 00029032 <EE,ME,CE,IR,DR> CR: 22000424 XER: 20000000 TASK = dec4cac0[1135] 'rmmod' THREAD: dec5a000 GPR00: 00000002 dec5be10 dec4cac0 dfba1820 c035d444 c035d478 ffffffff 00000000 GPR08: 0000002b 00000001 dfba193c 00000001 22000424 10019b34 1ffcb000 00000000 GPR16: 10012008 00000000 bf82ebe0 100017ec bf82ebec bf82ebe8 bf82ebd0 00000880 GPR24: 00000000 bf82ebf0 c03532f0 c03532e4 c036b594 dfba183c dfba1800 dfba1820 NIP [c01fec48] free_netdev+0xa0/0xb8 LR [c01febf4] free_netdev+0x4c/0xb8 Call Trace: [dec5be10] [c01febf4] free_netdev+0x4c/0xb8 (unreliable) [dec5be30] [e105f290] gfar_remove+0x50/0x68 [gianfar_driver] [dec5be40] [c01ec534] of_platform_device_remove+0x30/0x44 [dec5be50] [c0181760] __device_release_driver+0x68/0xc8 [dec5be60] [c0181868] driver_detach+0xa8/0xac [dec5be80] [c0180814] bus_remove_driver+0x9c/0xd8 [dec5bea0] [c0181efc] driver_unregister+0x60/0x98 [dec5beb0] [c01ec650] of_unregister_driver+0x14/0x24 [dec5bec0] [e10631bc] gfar_exit+0x18/0x4bc [gianfar_driver] [dec5bed0] [c0047584] sys_delete_module+0x16c/0x228 [dec5bf40] [c00116bc] ret_from_syscall+0x0/0x38 --- Exception: c01 at 0xff3669c LR = 0x10000f34 Instruction dump: 409e0024 a07e00c0 7c63f050 4be74429 80010024 bba10014 38210020 7c0803a6 4e800020 68000003 3160ffff 7d2b0110 <0f090000> 38000004 387e01f0 901e01d4 ---[ end trace 8c595bcd37230a0f ]--- localhost kernel: ------------[ cut here ]------------ Signed-off-by: Toru UCHIYAMA uchiyama.toru@jp.fujitsu.com Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-30PCI SR-IOV: correct broken resource alignment calculationsChris Wright
An SR-IOV capable device includes an SR-IOV PCIe capability which describes the Virtual Function (VF) BAR requirements. A typical SR-IOV device can support multiple VFs whose BARs must be in a contiguous region, effectively an array of VF BARs. The BAR reports the size requirement for a single VF. We calculate the full range needed by simply multiplying the VF BAR size with the number of possible VFs and create a resource spanning the full range. This all seems sane enough except it artificially inflates the alignment requirement for the VF BAR. The VF BAR need only be aligned to the size of a single BAR not the contiguous range of VF BARs. This can cause us to fail to allocate resources for the BAR despite the fact that we actually have enough space. This patch adds a thin PCI specific layer over the generic resource_alignment() function which is aware of the special nature of VF BARs and does sorting and allocation based on the smaller alignment requirement. I recognize that while resource_alignment is generic, it's basically a PCI helper. An alternative to this patch is to add PCI VF BAR specific information to struct resource. I opted for the extra layer rather than adding such PCI specific information to struct resource. This does have the slight downside that we don't cache the BAR size and re-read for each alignment query (happens a small handful of times during boot for each VF BAR). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Yu Zhao <yu.zhao@intel.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-29drm/i915: Improve CRTDDC mapping by using VBT infoDavid Müller (ELSOFT AG)
Use VBT information to determine which DDC bus to use for CRTDCC. Fall back to GPIOA if VBT info is not available. Signed-off-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 21:36:42 +0000