aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-01au1xxx-ide/rapide: use hwif->index for ide_unregister()Bartlomiej Zolnierkiewicz
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-pmac: macio resource freeing bugfixBartlomiej Zolnierkiewicz
Release DMA resource before zeroing pmif. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01au1xxx-ide: device tree bugfixBartlomiej Zolnierkiewicz
Add missing hw.dev setup (so hwif->gendev.parent will be set by ide_init_port_hw() to point to the parent device). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: use ide_build_sglist() and ide_destroy_dmatable() in non-PCI host driversBartlomiej Zolnierkiewicz
* Make ide_build_sglist() and ide_destroy_dmatable() available also when CONFIG_BLK_DEV_IDEDMA_PCI=n. * Use ide_build_sglist() and ide_destroy_dmatable() in {ics,au1xxx-}ide.c and remove no longer needed {ics,au}ide_build_sglist(). There should be no functionality changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: switch to DMA-mapping APIBartlomiej Zolnierkiewicz
* pci_map_sg() -> dma_map_sg() in ide_build_sglist(). * pci_unmap_sg() -> dma_unmap_sg() in ide_destroy_dmatable(). There should be no functionality changes caused by this patch except for blackfin arch whose dma_[un]map_sg() implementation differs from pci_[un]map_sg() one (on s390 arch there is no PCI, on avr32 and h8300 archs PCI is currently unsupported, on m32r arch PCI support depends on BROKEN, on m68k arch PCI support depends on HADES which in turn depends on BROKEN, on all other archs dma_[un]map_sg() functionality matches with pci_[un]map_sg() one). blackfin behavior change was ack-ed by Bryan Wu. Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01icside: use hwif->devBartlomiej Zolnierkiewicz
* Setup hwif->dev in icside_setup(). * Use hwif->dev instead of state->dev in icside_build_sglist(), icside_dma_end(), icside_dma_start() and icside_dma_setup(). * Remove no longer needed 'dev' field from struct icside_state. Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01au1xxx-ide: use hwif->devBartlomiej Zolnierkiewicz
* Setup hwif->dev in au_ide_probe(). * Use hwif->dev instead of ahwif->dev in auide_build_sglist(), auide_build_dmatable(), auide_dma_end() and auide_ddma_init(). * Remove no longer needed 'dev' field from _auide_hwif type. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_tBartlomiej Zolnierkiewicz
Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: use ide_destroy_dmatable() instead of pci_unmap_sg() (take 2)Bartlomiej Zolnierkiewicz
Use ide_destroy_dmatable() in: * ide-dma.c::ide_build_dmatable() * sgiioc4.c::sgiioc4_build_dma_table() * pmac.c::pmac_ide_{build,destroy}_dmatable() There should be no functionality changes caused by this patch. v2: * pmac.c build fix from Andrew Morton. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: remove BUG_ON() from ide_build_sglist()Bartlomiej Zolnierkiewicz
do_rw_taskfile() has been fixed to check the return value of ->dma_setup method so this BUG_ON() is no longer needed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: fix ide_intr() for non-PCI devices and CONFIG_BLK_DEV_IDEPCI=yBartlomiej Zolnierkiewicz
'hwif->pci_dev && !hwif->pci_dev->vendor' condition is never true, check for 'hwif->chipset != ide_pci' instead. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01piix: remove stale commentsBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: add IDE_HFLAG_NO_DSC host flagBartlomiej Zolnierkiewicz
* Add IDE_HFLAG_NO_DSC host flag for hosts that doesn't support DSC overlap. * Set it in aec62xx (for ATP850UF only) and hpt34x host drivers. * Convert ide-tape device driver to check for IDE_HFLAG_NO_DSC flag. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: add IDE_HFLAG_CLEAR_SIMPLEX host flagBartlomiej Zolnierkiewicz
* Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base(). * Factor out code for forcing host out of "simplex" mode from ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper. * Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229), amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and serverworks (for CSB5) host drivers. * Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag instead of checking dev->device (BTW the code was buggy because it didn't check for dev->vendor, luckily none of these PCI Device IDs was used by some other vendor for PCI IDE controller). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01amd74xx: remove amd_ide_chips tableBartlomiej Zolnierkiewicz
* Remove no longer needed assertion from amd74xx_probe(). * Factor out cable detection for AMD7409 to amd7409_cable_detect() and for chipsets >= AMD7411 to amd7411_cable_detect(). * Use dev->vendor and dev->device instead of amd_config->udma_mask when selecting cable detection method and checking for broken FIFO support in init_chipset_amd74xx(). * Remove no longer needed AMD_BAD_FIFO define. * Add 'swdma' parameter for setting .swdma_mask to DECLARE_AMD_DEV() macro. * Add 'udma' parameter for setting .udma_mask to DECLARE_{AMD,NV}_DEV() macro. * Keep a copy of a current amd74xx_chipsets[] entry in amd74xx_probe() in order to fix ->swdma_mask on early AMD7409 revisions and ->udma_mask on Serenade mainboards. * Remove no longer needed fixups from init_chipset_amd74xx() and AMD_CHECK_{SWDMA,SERENADE} defines. * Move printing banner message from init_chipset_amd74xx() to amd74xx_probe(), also remove incorrect comment while at it. * Use hwif->ultra_mask instead of amd_config->udma_mask in amd_set_drive(). * Add 'udma_mask' argument to amd_set_speed() and pass UDMA mask from amd_set_drive() instead of using amd_config->udma_mask. * Move amd_config->base from AMD_* defines to users of these defines and add 0x40 the defined values. Then add amd_offset() inline helper for selecting offset from 0x40 base (needed for nVidia controllers) and finally use it in amd_set_speed(), amd7411_cable_detect() and init_chipset_amd74xx() instead of amd_config->base. * Remove no longer needed AMD_BAD_SWDMA define, ->{swdma,ultra}_mask setup from init_hwif_amd74xx(), amd_{config,chipset} variables and amd_ide_chips table. * Fix init_chipset_amd74xx() comment. * Bump driver version. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: ide_setup_dma() assumes 8 portsSergei Shtylyov
According to http://marc.info/?l=linux-ide&m=114346138611631, the drivers must always register 8 DMA ports with ide_setup_dma(), so its last argument is not needed. While at it, kill some useless parens in that function... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01trm290: cannot call ide_setup_dma()Sergei Shtylyov
The TRM-290 chip is *not* SFF-8038i compatible and therefore can *not* call ide_setup_dma() -- fix this and also cleanup the code a bit... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.cBorislav Petkov
There should be no functional changes from this. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-{floppy,tape}: remove debug code for dumping identify dataBartlomiej Zolnierkiewicz
IDE core supports dumping raw identify data in hdparm friendly format now so verbose identify dumping in ide-{floppy,tape}.c device drivers (done iff IDE{FLOPPY,TAPE}_DEBUG_INFO is defined to '1' and it is '0' by default) is no longer nedeed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: add ide_dump_identify() debug helperBartlomiej Zolnierkiewicz
* Add ide_dump_identify() debug helper for dumping raw identify data in the hdparm friendly format (== the identify data can be extracted from dmesg output and passed to hdparm --Istdin). * Dump identify data in ide-probe.c::do_identify() if DEBUG is enabled. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: update driver version, comments and copyrightsBartlomiej Zolnierkiewicz
* Bump driver version. * Remove filename and stale TODO from comments. * Add my copyrights. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: unify request end exit path in cdrom_decode_status()Bartlomiej Zolnierkiewicz
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_write_check_ireason() and cdrom_read_check_ireason()Bartlomiej Zolnierkiewicz
Add 'rw' parameter to cdrom_read_check_ireason(), make it handle both read and write checking, rename it to ide_cd_check_ireason(), finally remove no longer needed cdrom_write_check_ireason(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_rw_intr() and cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
Add handling of fs read/write requests to cdrom_nepwc_intr() and remove no longer needed cdrom_rw_intr(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_rw_intr()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: prepare cdrom_rw_intr() and cdrom_newpc_intr() to be mergedBartlomiej Zolnierkiewicz
In cdrom_newpc_intr(): * cleanup variables in the 'transfer data' loop In cdrom_rw_intr(): * rename 'sectors_to_transfer' to 'thislen' * rename 'this_transfer' to 'blen' * keep number of bytes (instead of sectors) in 'thislen' and 'blen' * call 'xferfunc' only once for 'blen' * cache 'rq->buffer' in 'ptr' variable * check for 'rq->bio' before setting 'ptr' and 'blen' * check for 'ptr' instead of 'rq->current_nr_sectors' There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: unify moving to the next buffer in cdrom_rw_intr()Bartlomiej Zolnierkiewicz
Use the fact that for the first loop rq->current_nr_sectors is always set and unify moving to the next buffer for read/write requests. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_start_read() and cdrom_start_write()Bartlomiej Zolnierkiewicz
Add handling of read requests to cdrom_start_write(), rename it to cdrom_start_rw() and remove no longer needed cdrom_start_read(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_start_read_continuation() and cdrom_start_rw_cont()Bartlomiej Zolnierkiewicz
* Add handling of write requests to cdrom_start_read_continuation(), rename it to cdrom_start_rw_cont() and remove no longer needed cdrom_start_write_cont(). * Remove redundant '(rq->sector & (sectors_per_frame - 1)' check. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_read_intr() and cdrom_write_intr()Bartlomiej Zolnierkiewicz
Add handling of read requests to cdrom_write_intr(), rename it to cdrom_rw_intr() and remove no longer needed cdrom_read_intr(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: factor out transfer size checking from cdrom_read_intr()Bartlomiej Zolnierkiewicz
This is a preparation for cdrom_read_intr() and cdrom_write_intr() merge. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: add ide_cd_drain_data() helperBartlomiej Zolnierkiewicz
Add ide_cd_drain_data() and use it in cdrom_{buffer_sectors,read_intr}() (as a nice side-effect this cuts 0.5kB of code from ide-cd.o). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_do_packet_command() and cdrom_do_block_pc()Bartlomiej Zolnierkiewicz
Add REQ_TYPE_{SENSE,ATA_PC} requests handling to cdrom_do_block_pc() and remove cdrom_do_packet_command(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove cdrom_do_pc_continuation()Bartlomiej Zolnierkiewicz
cdrom_do_pc_continuation() is now identical to cdrom_do_newpc_cont() so just always use the latter function. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_pc_intr() and cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
Add handling of REQ_TYPE_{SENSE,ATA_PC} requests to cdrom_newpc_intr() (please note that these requests never have 'bio' attached to them and they never use DMA), then remove no longer needed cdrom_pc_intr(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: unify request end exit path in cdrom_pc_intr()Bartlomiej Zolnierkiewicz
This is a preparation for cdrom_pc_intr() and cdrom_newpc_intr() merge. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: factor out request sense fixup from cdrom_pc_intr()Bartlomiej Zolnierkiewicz
This is a preparation for cdrom_pc_intr() and cdrom_newpc_intr() merge. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove BUG_ON() from cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
There is no need for it anylonger and ide_set_handler() complains if ->handler is not NULL anyway. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move code handling cdrom.c IOCTLs to ide-cd_ioctl.cBartlomiej Zolnierkiewicz
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: rename cdrom_* functions to ide_cd_*Bartlomiej Zolnierkiewicz
* cdrom_prepare_request() -> ide_cd_init_rq() * cdrom_queue_packet_command() -> ide_cd_queue_pc() * cdrom_lockdoor() -> ide_cd_lockdoor() * cdrom_read_toc() -> ide_cd_read_toc() * cdrom_get_toc_entry() -> ide_cd_get_toc_entry() This is a preparation to move code handling cdrom.c IOCTLs out of ide-cd.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: coding style fixes for cdrom_get_toc_entry()Bartlomiej Zolnierkiewicz
This is a preparation to move code handling cdrom.c IOCTLs out of ide-cd.c. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move lba_to_msf() and msf_to_lba() to <linux/cdrom.h>Bartlomiej Zolnierkiewicz
* Move lba_to_msf() and msf_to_lba() to <linux/cdrom.h> (use 'u8' type instead of 'byte' while at it). * Remove msf_to_lba() copy from drivers/cdrom/cdrom.c. Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_select_speed() into ide_cdrom_select_speed()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_read_subchannel() into ide_cdrom_get_mcn()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_play_audio() into ide_cd_fake_play_trkind()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: factor out ioctl handlers from ide_cdrom_audio_ioctl()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.cBartlomiej Zolnierkiewicz
* Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out from ide-cd.[c,h]. Add MODULE_ALIAS("ide-cd") to preserve compatibility. * Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c. ide-cd_verbose.c is IDE subsystem independent and may be easily converted into generic library usable by other drivers (i.e. libata) if needed. * Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig replacing VERBOSE_IDE_CD_ERRORS define. Make this config option enabled by default and visible only if CONFIG_EMBEDDED is defined. before the patch: text data bss dec hex filename 22841 360 1056 24257 5ec1 drivers/ide/ide-cd.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y: text data bss dec hex filename 22857 360 1056 24273 5ed1 drivers/ide/ide-cd_mod.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n: text data bss dec hex filename 15091 360 1056 16507 407b drivers/ide/ide-cd_mod.o Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: coding style fixes for VERBOSE_IDE_CD_ERRORS codeBartlomiej Zolnierkiewicz
* Coding style fixes for VERBOSE_IDE_CD_ERRORS code. * Add KERN_{ERR,CONT} printk() levels where needed. This is a preparation for moving this code out of ide-cd.[c,h]. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove duplicate sense keys definitions from ide-cd.hBartlomiej Zolnierkiewicz
ide-cd.c already uses sense keys definitions from <scsi/scsi.h>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-21 10:48:51 +0000