aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-07-05net: remove NET_RX_BAD and NET_RX_CN* definesFlorian Westphal
almost no users in the tree; and the few that use them treat them like NET_RX_DROP. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-07-05forcedeth: Fix NAPI race.Eric Dumazet
Eric Dumazet a écrit : > Ingo Molnar a écrit : >>> The following changes since commit 52989765629e7d182b4f146050ebba0abf2cb0b7: >>> Linus Torvalds (1): >>> Merge git://git.kernel.org/.../davem/net-2.6 >>> >>> are available in the git repository at: >>> >>> master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git master >> Hm, something in this lot quickly wrecked networking here - see the >> tx timeout dump below. It starts with: >> >> [ 351.004596] WARNING: at net/sched/sch_generic.c:246 dev_watchdog+0x10b/0x19c() >> [ 351.011815] Hardware name: System Product Name >> [ 351.016220] NETDEV WATCHDOG: eth0 (forcedeth): transmit queue 0 timed out >> >> Config attached. Unfortunately i've got no time to do bisection >> today. > > > > forcedeth might have a problem, in its netif_wake_queue() logic, but > I could not see why a recent patch could make this problem visible now. > > CPU0/1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 > is not a new cpu either :) > > forcedeth uses an internal tx_stop without appropriate barrier. > > Could you try following patch ? > > (random guess as I dont have much time right now) We might have a race in napi_schedule(), leaving interrupts disabled forever. I cannot test this patch, I dont have the hardware... Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05drivers/net/smsc911x.c: Fix resource size off by 1 errorJulia Lawall
The call resource_size(res) returns res->end - res->start + 1 and thus the second change is semantics-preserving. res_size is then used as the second argument of a call to request_mem_region, and the memory allocated by this call appears to be the same as what is released in the two calls to release_mem_region. So the size argument for those calls should be resource_size(size) as well. Alternatively, in the second call to release_mem_region, the second argument could be res_size, as that variable has already been initialized at the point of this call. The problem was found using the following semantic patch: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) @@ struct resource *res; @@ - res->end - res->start + BAD(resource_size(res)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05pcnet_cs: add new idKen Kawasaki
add new id (RIOS System PC CARD3 ETHERNET). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05bnx2x: Fix the maximal values of coalescing timeouts.Eilon Greenstein
This patch properly defines the maximum values for rx/tx coalescing timeouts. Signed-off-by: Vlad Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05bnx2x: Disable HC coalescing when setting timeout to zero.Eilon Greenstein
Problem reported by Flavio Leitner <fleitner@redhat.com>: When setting rx/tx coalescing timeout to the values less than 12 traffic was stopped. The FW supports coalescing in 12us granularity, and so value of less then 12 should be interpreted as disabling coalescing Signed-off-by: Vlad Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05tun: Fix device unregister raceHerbert Xu
It is currently possible for an asynchronous device unregister to cause the same tun device to be unregistered twice. This is because the unregister in tun_chr_close only checks whether __tun_get(tfile) != NULL. This however has nothing to do with whether the device has already been unregistered. All it tells you is whether __tun_detach has been called. This patch fixes this by using the most obvious thing to test whether the device has been unregistered. It also moves __tun_detach outside of rtnl_unlock since nothing that it does requires that lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-04video: sm501fb: Early initialization of mm_lock mutex.Paul Mundt
Commit 537a1bf059fa312355696fa6db80726e655e7f17 (fbdev: add mutex for fb_mmap locking) introduces a ->mm_lock mutex for protecting smem assignments. Unfortunately in the case of sm501fb these happen quite early in the initialization code, well before the mutex_init() that takes place in register_framebuffer(), leading to: Badness at kernel/mutex.c:207 Pid : 1, Comm: swapper CPU : 0 Not tainted (2.6.31-rc1-00284-g529ba0d-dirty #2273) PC is at __mutex_lock_slowpath+0x72/0x1bc PR is at __mutex_lock_slowpath+0x66/0x1bc ... matroxfb appears to have the same issue and has solved it with an early mutex_init(), so we do the same for sm501fb. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (27 commits) parisc: use generic atomic64 on 32-bit parisc: superio: fix build breakage parisc: Fix PCI resource allocation on non-PAT SBA machines parisc: perf: wire up sys_perf_counter_open parisc: add task_pt_regs macro parisc: wire sys_perf_counter_open to sys_ni_syscall parisc: inventory.c, fix bloated stack frame parisc: processor.c, fix bloated stack frame parisc: fix compile warning in mm/init.c parisc: remove dead code from sys_parisc32.c parisc: wire up rt_tgsigqueueinfo parisc: ensure broadcast tlb purge runs single threaded parisc: fix "delay!" timer handling parisc: fix mismatched parenthesis in memcpy.c parisc: Fix gcc 4.4 warning in lba_pci.c parisc: add parameter to read_cr16() parisc: decode_exc.c should include kernel.h parisc: remove obsolete hw_interrupt_type parisc: fix irq compile bugs in arch/parisc/kernel/irq.c parisc: advertise PCI devs after "assign_resources" ... Manually fixed up trivial conflicts in tools/perf/perf.h due to addition of SH vs HPPA perf-counter support.
2009-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: fix pcap adc locking mfd: sm501, fix lock imbalance
2009-07-04Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Fix CONFIG_FLATMEM version of pfn_valid() MIPS: Reorganize Cavium OCTEON PCI support. Update Yoichi Yuasa's e-mail address MIPS: Allow suspend and hibernation again on uniprocessor kernels. MIPS: 64-bit: Fix o32 core dump MIPS: BC47xx: Fix SSB irq setup MIPS: CMP: Update sync-r4k for current kernel MIPS: CMP: Move gcmp_probe to before the SMP ops MIPS: CMP: activate CMP support MIPS: CMP: Extend IPI handling to CPU number MIPS: CMP: Extend the GIC IPI interrupts beyond 32 MIPS: Define __arch_swab64 for all mips r2 cpus MIPS: Update VR41xx GPIO driver to use gpiolib MIPS: Hookup new syscalls sys_rt_tgsigqueueinfo and sys_perf_counter_open. MIPS: Malta: Remove unnecessary function prototypes MIPS: MT: Remove unnecessary semicolons MIPS: Add support for Texas Instruments AR7 System-on-a-Chip
2009-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: finally remove the obsolete variable $TOPDIR gitignore: ignore scripts/ihex2fw Kbuild: Disable the -Wformat-security gcc flag gitignore: ignore gcov output files kbuild: deb-pkg ship changelog Add new __init_task_data macro to be used in arch init_task.c files. asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h Add new macros for page-aligned data and bss sections. asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
2009-07-04Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: don't merge requests of different failfast settings cciss: Ignore stale commands after reboot
2009-07-03be2net: fix spurious interrupt handling in intx modeSathya Perla
Occasionally we may see an interrupt without an event in the eq. In intx, we currently see the event queue and return IRQ_NONE causing a the irq to be disabled ("no one cared".) Instead, read the CEV_ISR reg to check the existence of the interrupt. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: disable K1 at 1000Mbps for 82577/82578Bruce Allan
This workaround is required for an issue in hardware where noise on the interconnect between the MAC and PHY could be generated by a lower power mode (K1) at 1000Mbps resulting in bad packets. Disable K1 while at 1000 Mbps but keep it enabled for 10/100Mbps and when the cable is disconnected. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: delay second read of PHY_STATUS register on failure of first readBruce Allan
Some PHYs may require two reads of the PHY_STATUS register to determine the link status. If the PHY is being accessed by another thread it is possible the first read could timeout and fail. In this case, put a delay in so the second read will pick up the correct link status. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: prevent NVM corruption on sectors larger than 4KBruce Allan
Limit NVM writes to 4K sections to prevent NVM corruption on larger sector allocations (up to 64K). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: do not write SmartSpeed register bits on parts without supportBruce Allan
The driver was accessing register bits for features on parts that do not support that feature. This could cause problems in the hardware. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: delay after LCD reset and proper checks for PHY configuration doneBruce Allan
A previous workaround for 82578 to avoid link stall causes some PHY registers to get cleared inadvertently. Add a delay after all LCD resets to make sure PHY registers are in a stable state before continuing. Also, after resets check the EEC register for the state of PHY configuration performed by the MAC for ICH9 and earlier parts (as done before), but check the LAN_INIT_DONE bit in the STATUS register for ICH10 and newer parts (EEC doesn't exist in these newer parts). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: PHY loopback broken on 82578Bruce Allan
PHY loopback on 82578 fails to work as a result of flushing the packets in the FIFO buffer in the link stall workaround. Don't perform the workaround if in PHY loopback mode. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: Not allow 8259x unsupported wol options change from ethtoolMallikarjuna R Chilakala
Wake-on-lan is currently only supported by 82599 KX4 devices, in all other cases return a proper value from ixgbe_wol_exclusion function call. Otherwise from ethtool we will be able to change wol options of unsupported 8259x devices. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix inconsistent SFP/SFP+ failure results.Don Skidmore
Currently if we loaded the driver, insert an unsupported module, and then attempt to "ifconfig up" the device it will be brought down but the netdev would not be unregistered. This behavior is different than all other code paths. This patch corrects that by down'ing the device and then scheduling the sfp_config_module_task tasklet. The tasklet will detect this condition (like it does with other code paths) and do the unregister_netdev(). I also removed the log message as this condition (an unsupported SFP+ module) will be logged in sfp_config_module_task. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix regression on some 82598 adaptersDon Skidmore
The change to check the SFP+ module again on open() was causing the XFP (non-SFP+) adapters to be rejected. We only want to try and re-identify the SFP+ module if the original probe found that this device was an SFP+ device. So for this code path (driver loaded with SFP module, module inserted, ifconfig up of the device) the type will be ixgbe_phy_unknown for an unidentified SFP+ module. So we only check if that is the case. This problem also shows up on Copper devices. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix issues with failing to detect insert of unsupported moduleDon Skidmore
Several small fixes around negative test case of the insertion of a IXGBE_ERR_NOT_SUPPORTED module. - mdio45_probe call was always failing due to mdio.prtad not being set. The function set to mdio.mdio_read was still working as we just happen to always be at prtad == 0. This will allow us to set the phy_id and phy.type correctly now. - There was timing issue with i2c calls when initiated from a tasklet. A small delay was added to allow the electrical oscillation to calm down. - Logic change in ixgbe_sfp_task that allows NOT_SUPPORTED condition to be recognized. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix sizeof usage.Ron Mercer
Some usage was only sizing a pointer rather than the data type. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Add/use function for link up/down.Ron Mercer
We need to set/clear the mac address register when the link goes up/down respectively. Without this both ports of a 2-port device can end up with the same mac address in a bonding scenario. The new ql_link_on() and ql_link_off() will also be used in handling certain firmware events. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix MAC address bonding issue.Ron Mercer
This addes functionality to set/clear the MAC address in the hardware when the link goes up/down. The MAC address register is persistent across function resets. In bonding the same address can bounce from one port to the other. This can cause packets to be delivered to the wrong port. This patch clears the MAC address in the hardware when the link is down and sets it when the link comes up. It was found that pulling/pushing the cable from one port to another causes the same MAC address to be in both ports. The next patch in this series will use this functionality as well. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix tx byte counter.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix redundant call to free resources.Ron Mercer
The caller will free acquired resouces if a failure occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix carrier on condition.Ron Mercer
We were turning on the carrier without verifying the link was up. This adds link up to the link initialize check before turning carrier on. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Clear frame to queue routing before reset.Ron Mercer
Not clearing the routing bits can cause frames to erroneously get routed to management processor. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Expand coverage of hw lock for config register.Ron Mercer
The hardware semaphore covers the configuration register as well as the ICB registers. The ICB high and low regs contain the address of the initialization control block and the config register is used to signal the hardware that a block is ready to be downloaded. Currently we were only protecting the ICB regs. This changes expands to cover the config register as well. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03cciss: Ignore stale commands after rebootHannes Reinecke
When doing an unexpected shutdown like kexec the cciss firmware might still have some commands in flight, which it is trying to complete. The driver is doing it's best on resetting the HBA, but sadly there's a firmware issue causing the firmware _not_ to abort or drop old commands. So the firmware will send us commands which we haven't accounted for, causing the driver to panic. With this patch we're just ignoring these commands as there is nothing we could be doing with them anyway. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-07-03Update Yoichi Yuasa's e-mail addressYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: BC47xx: Fix SSB irq setupmatthieu castet
The current ssb irq setup in ssb_mipscore_init has the problem that it configures some device on some irq without checking that the irq is not taken by an other device. For example in my case PCI host is on irq 0 and IPSEC on irq 3. The current code: - store in dev->irq that IPSEC irq is 3 + 2 - do a set_irq 0->3 on PCI host But now IPSEC irq is not routed anymore to the mips code and dev->irq is wrong. This causes a problem described in [1]. This patch tries to solve the problem by making set_irq configure the device we want to take the irq on the shared irq0. The previous example becomes: - store in dev->irq that IPSEC irq is 3 + 2 - do a set_irq 0->3 on PCI host: - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC I also added some code to print the irq configuration after irq setup to allow easier debugging. And I add extra checking in ssb_mips_irq to report device without irq or device with not routed irq. [1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICES Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by : Michael Buesch <mb@bu3sch.de> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Update VR41xx GPIO driver to use gpiolibYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03mfd: fix pcap adc lockingDaniel Ribeiro
Release the lock on error. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-03mfd: sm501, fix lock imbalanceJiri Slaby
Add omitted unlock in sm501_unit_power. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-07-03parisc: superio: fix build breakageAlexander Beregalov
Usage of parport_pc_probe_port was changed in 28783eb52 (parport: Fix various uses of parport_pc). It introduced this build error: drivers/parisc/superio.c: In function 'superio_parport_init': drivers/parisc/superio.c:437: error: too few arguments to function 'parport_pc_probe_port' Fix it. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03parisc: Fix PCI resource allocation on non-PAT SBA machinesMatthew Wilcox
We weren't marking the resources as memory resources, so they weren't being found by pci_claim_resource(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03parisc: Fix gcc 4.4 warning in lba_pci.cGrant Grundler
gcc 4.4 warns about: drivers/parisc/lba_pci.c: In function 'lba_pat_resources': drivers/parisc/lba_pci.c:1099: warning: the frame size of 8280 bytes is larger than 4096 bytes The problem is we declare two large structures on the stack. They don't need to be on the stack since they are only used during LBA initialization (which is serialized). Moving to be "static". Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03parisc: remove obsolete hw_interrupt_typeThomas Gleixner
The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup Convert the last remaining users to struct irq_chip and remove the define. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03parisc: advertise PCI devs after "assign_resources"Grant Grundler
Alex Chiang asked me why PARISC was calling pci_bus_add_devices() and pci_bus_assign_resources() in the opposite order from everyone else. No reason and I couldn't see any data dependency. Patch below applies cleanly to 2.6.30-rc2. Later, I suspected the code worked only because no drivers would be loaded/ready until much later in the system initialization sequence. Tested "LBA" code on J6000 (32-bit) and A500 (64-bit SMP) with 2.6.30-rc2. Not tested with any Dino controllers. Not tested with PCI-PCI Bridge (TBD). Reported-by: Alex Chiang <achiang@hp.com> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03parisc: ccio-dma: fix build failure without procfsAlexander Beregalov
Fix this build error when CONFIG_PROC_FS is not set: drivers/parisc/ccio-dma.c:1574: error: 'ccio_proc_info_fops' undeclared Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03parisc: stifb: should depend on STI_CONSOLEAlexander Beregalov
Fix this build error when CONFIG_STI_CONSOLE is not set drivers/video/stifb.c:1337: undefined reference to `sti_get_rom' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] cxgb3i: fix connection error when vlan is enabled [SCSI] FC transport: Locking fix for common-code FC pass-through patch [SCSI] zalon: fix oops on attach failure [SCSI] fnic: use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK [SCSI] fnic: remove redundant BUG_ONs and fix checks on unsigned [SCSI] ibmvscsi: Fix module load hang
2009-07-02Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: (38 commits) intel-iommu: Don't keep freeing page zero in dma_pte_free_pagetable() intel-iommu: Introduce first_pte_in_page() to simplify PTE-setting loops intel-iommu: Use cmpxchg64_local() for setting PTEs intel-iommu: Warn about unmatched unmap requests intel-iommu: Kill superfluous mapping_lock intel-iommu: Ensure that PTE writes are 64-bit atomic, even on i386 intel-iommu: Make iommu=pt work on i386 too intel-iommu: Performance improvement for dma_pte_free_pagetable() intel-iommu: Don't free too much in dma_pte_free_pagetable() intel-iommu: dump mappings but don't die on pte already set intel-iommu: Combine domain_pfn_mapping() and domain_sg_mapping() intel-iommu: Introduce domain_sg_mapping() to speed up intel_map_sg() intel-iommu: Simplify __intel_alloc_iova() intel-iommu: Performance improvement for domain_pfn_mapping() intel-iommu: Performance improvement for dma_pte_clear_range() intel-iommu: Clean up iommu_domain_identity_map() intel-iommu: Remove last use of PHYSICAL_PAGE_MASK, for reserving PCI BARs intel-iommu: Make iommu_flush_iotlb_psi() take pfn as argument intel-iommu: Change aligned_size() to aligned_nrpages() intel-iommu: Clean up intel_map_sg(), remove domain_page_mapping() ...
2009-07-02phylib: fixes for PHY_RESUMING state changesWade Farnsworth
The PHY_HALTED state disables phydev->link, but the link will not be updated upon entering PHY_RESUMING. Add a call to phy_read_status() to update the link before entering PHY_RUNNING. If the link is not up at this point, enter the PHY_NOLINK state instead. Also, when transitioning from PHY_RESUMING to PHY_RUNNING, calls to netif_carrier_on() and phydev->adjust_link() are missing. Add the calls similar to the other transitions to PHY_RUNNING. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-02netxen: avoid frequent firmware resetDhananjay Phadke
Restrict firmware reset to following cases - o chip rev is NX2031 (firmare doesn't support heartbit). o firmware is dead. o previous attempt to init firmware had failed. o we have got newer file firmware. This speeds up module load tremendously (by upto 8 sec), also avoids downtime for NCSI (management) pass-thru traffic. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>