aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-22netdev: Handle ->addr_list_lock just like ->_xmit_lock for lockdep.David S. Miller
The new address list lock needs to handle the same device layering issues that the _xmit_lock one does. This integrates work done by Patrick McHardy. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21mac80211_hwsim.c: fix: BUG: unable to handle kernel NULL pointer dereference ↵Ian Schram
at 0000000000000370 I was looking at this out of interest, but I'm in no way familiar with the code. Looks to me that the error handling code in mac80211_hwsim is awkward. Which leads to it calling ieee80211_unregister_hw even when ieee80211_register_hw failed. The function has a for loop where it generates all simulated radios. when something fails, the error handling will call mac80211_hwsim_free which frees all simulated radios who's pointer isn't zero. However the information stored is insufficient to determine whether or not the call to ieee80211_register_hw succeeded or not for a specific radio. The included patch makes init_mac80211_hwsim clean up the current simulated radio, and then calls into mac80211_hwsim_free to clean up all the radios that did succeed. This however doesn't explain why the rate control registration failed.. build tested this, but had some problems reproducing the original problem. Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21hdlcdrv: Fix CRC calculation.Micah Dowty
This is a trivial patch against the hdlcdrv module that fixes its CRC calculation. The finished CRC was overwriting the first two bytes of each packet rather than being appended to the end. I've tested this with 2.6.8 and 2.6.10-rc1, but hdlcdrv hasn't changed much recently so it should work with many other kernel versions. Signed-off-by: Micah Dowty <micah@navi.cx> Acked-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21sunhme: Remove stop/wake TX queue calls in set-multicast-list handler.David S. Miller
Based upon a bug report by Alexander Beregalov and commentary from Ben Hutchings. These are totally unnecessary, in particular because this driver's ->hard_start_xmit() handler takes the same driver spinlock that the set-multicast-list handler uses. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21ucc_geth: do not touch net queue in adjust_link phylib callbackAnton Vorontsov
If the net queue has not been started, we'll get this nice oops and non-working ethernet: ------------[ cut here ]------------ Kernel BUG at c01f4648 [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC836x RDK Modules linked in: NIP: c01f4648 LR: c01c0a10 CTR: c01c08e4 REGS: cf839e40 TRAP: 0700 Not tainted (2.6.26-05254-gc7b9969) MSR: 00021032 <ME,IR,DR> CR: 22042044 XER: 00000000 TASK = cf828c30[4] 'events/0' THREAD: cf838000 GPR00: c01c0a10 cf839ef0 cf828c30 c035ceb0 cf8469a0 00000064 00000000 00000000 GPR08: c035ceb0 00000001 00000001 cf99c280 22044044 7ca81020 0fffc000 00000000 GPR16: 0fff2544 0fff63c0 00000000 0fff78e0 0ffa5580 00000004 00000000 00000000 GPR24: 02082000 cf9d0000 d1068000 00009032 cf846800 cf846b80 00000001 00000014 NIP [c01f4648] __netif_schedule+0x28/0x8c LR [c01c0a10] adjust_link+0x12c/0x1e4 Call Trace: [cf839ef0] [c0380f50] 0xc0380f50 (unreliable) [cf839f10] [c01c0a10] adjust_link+0x12c/0x1e4 [cf839f40] [c01c2628] phy_state_machine+0x2e0/0x448 [cf839f60] [c00425e8] run_workqueue+0xc8/0x168 [cf839f90] [c0042c6c] worker_thread+0x70/0xd0 [cf839fd0] [c0046954] kthread+0x48/0x84 [cf839ff0] [c0012488] kernel_thread+0x44/0x60 Instruction dump: 7c0803a6 4e800020 3d20c036 9421ffe0 7c0802a6 7c681b78 3929ceb0 7c694a78 7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028 ---[ end trace a57d367843bd2904 ]--- Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove netif_tx_schedule_all() from adjust_link(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21gianfar: do not touch net queue in adjust_link phylib callbackAnton Vorontsov
If the net queue has not been started, we'll get this nice oops and non-working ethernet: PHY: 0:01 - Link is Up - 1000/Full ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1328! Oops: Exception in kernel mode, sig: 5 [#1] MPC837x RDB Modules linked in: NIP: c02544a0 LR: c01a17d0 CTR: c01a16ac REGS: cf837e40 TRAP: 0700 Not tainted (2.6.26-05253-g14b395e) MSR: 00021032 <ME,IR,DR> CR: 22042044 XER: 00000000 TASK = cf819400[5] 'events/0' THREAD: cf836000 GPR00: c01a17d0 cf837ef0 cf819400 c03d8d08 cf8469a0 00000064 00000000 00000000 GPR08: c03d8d08 00000001 00000001 cf899ba0 22044044 00000000 0fffd000 00000000 GPR16: 0fff3028 0fff6cf0 00000000 0fff8390 0ff494a0 00000004 00000000 00000000 GPR24: c0361a00 00001058 cf9f6600 00009032 cf846800 cf846b80 00000001 00000014 NIP [c02544a0] __netif_schedule+0x28/0x8c LR [c01a17d0] adjust_link+0x124/0x1cc Call Trace: [cf837ef0] [c03fb3a0] 0xc03fb3a0 (unreliable) [cf837f10] [c01a17d0] adjust_link+0x124/0x1cc [cf837f40] [c01a8e28] phy_state_machine+0x2e0/0x448 [cf837f60] [c0040254] run_workqueue+0xc8/0x168 [cf837f90] [c00408d8] worker_thread+0x70/0xd0 [cf837fd0] [c0044630] kthread+0x48/0x84 [cf837ff0] [c0012610] kernel_thread+0x44/0x60 Instruction dump: 7c0803a6 4e800020 3d20c03e 9421ffe0 7c0802a6 7c681b78 39298d08 7c694a78 7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028 ---[ end trace 13dfd73ee42d0c30 ]--- Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove netif_tx_schedule_all() from adjust_link(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21atl1: Do not wake queue before queue has been started.David S. Miller
Based upon a bug report by Alexey Dobriyan, the patch is also tested by him and confirmed to fix the problem. Packet flow during link state events should not be done by waking and stopping the TX queue anyways, that is handled transparently by netif_carrier_{on,off}(). So, remove the netif_{wake,stop}_queue() calls in the link check code, and add the necessary netif_start_queue() call to atl1_up(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-20Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: gpu: re-order GPU subdirectory vs char for AGP vs DRM startup.
2008-07-20Merge branch 'for-linus' of git://git.o-hand.com/linux-mfdLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: let asic3 use mem resource instead of bus_shift mfd: remove DS1WM register definitions from asic3.h mfd: add ASIC3_CONFIG_GPIO templates mfd: fix the asic3 irq demux code mfd: asic3 should depend on gpiolib mfd: fix asic3 config array initialisation mfd: move asic3 probe functions into __init section mfd: Use uppercase only for asic3 macros and defines mfd: use dev_* macros for asic3 debugging mfd: New asic3 gpio configuration code mfd: asic3 children platform data removal mfd: asic3 gpiolib support
2008-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (277 commits) V4L/DVB (8415): gspca: Infinite loop in i2c_w() of etoms. V4L/DVB (8414): videodev/cx18: fix get_index bug and error-handling lock-ups V4L/DVB (8411): videobuf-dma-contig.c: fix 64-bit build for pre-2.6.24 kernels V4L/DVB (8410): sh_mobile_ceu_camera: fix 64-bit compiler warnings V4L/DVB (8397): video: convert select VIDEO_ZORAN_ZR36060 into depends on V4L/DVB (8396): video: Fix Kbuild dependency for VIDEO_IR_I2C V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c V4L/DVB (8394): ir-common: CodingStyle fix: move EXPORT_SYMBOL_GPL to their proper places V4L/DVB (8393): media/video: Fix depencencies for VIDEOBUF V4L/DVB (8392): media/Kconfig: Convert V4L1_COMPAT select into "depends on" V4L/DVB (8390): videodev: add comment and remove magic number. V4L/DVB (8389): videodev: simplify get_index() V4L/DVB (8387): Some cosmetic changes V4L/DVB (8381): ov7670: fix compile warnings V4L/DVB (8380): saa7115: use saa7115_auto instead of saa711x as the autodetect driver name. V4L/DVB (8379): saa7127: Make device detection optional V4L/DVB (8378): cx18: move cx18_av_vbi_setup to av-core.c and rename to cx18_av_std_setup V4L/DVB (8377): ivtv/cx18: ensure the default control values are correct V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup V4L/DVB (8374): gspca: No conflict of 0c45:6011 with the sn9c102 driver. ...
2008-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits) iucv: Fix bad merging. net_sched: Add size table for qdiscs net_sched: Add accessor function for packet length for qdiscs net_sched: Add qdisc_enqueue wrapper highmem: Export totalhigh_pages. ipv6 mcast: Omit redundant address family checks in ip6_mc_source(). net: Use standard structures for generic socket address structures. ipv6 netns: Make several "global" sysctl variables namespace aware. netns: Use net_eq() to compare net-namespaces for optimization. ipv6: remove unused macros from net/ipv6.h ipv6: remove unused parameter from ip6_ra_control tcp: fix kernel panic with listening_get_next tcp: Remove redundant checks when setting eff_sacks tcp: options clean up tcp: Fix MD5 signatures for non-linear skbs sctp: Update sctp global memory limit allocations. sctp: remove unnecessary byteshifting, calculate directly in big-endian sctp: Allow only 1 listening socket with SO_REUSEADDR sctp: Do not leak memory on multiple listen() calls sctp: Support ipv6only AF_INET6 sockets. ...
2008-07-20dio: use dio_match_device() in dio_bus_match()Akinobu Mita
dio_bus_match() can use dio_match_device(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20m68k/Apollo: remove the unused APOLLO_ELPLUS optionGeert Uytterhoeven
Looking at older kernel sources the APOLLO_ELPLUS option was added somewhere during kernel 2.1, but even kernel 2.2.0 does not contain any driver that would be enabled through it... Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20export c2pAdrian Bunk
This patch fixes the following build error: <-- snip --> .. Building modules, stage 2. MODPOST 1203 modules ERROR: "c2p" [drivers/video/amifb.ko] undefined! .. make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20drivers/video/c2p.c: add MODULE_LICENSEAdrian Bunk
This patch adds the missing MODULE_LICENSE("GPL"). Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20atafb: Register Atari-specific video modes with sysfsGeert Uytterhoeven
Register the Atari-specific video modes with sysfs, so you can see them in /sys/class/graphics/fb0/modes and change the video mode by writing to /sys/class/graphics/fb0/mode. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20amifb: Register Amiga-specific video modes with sysfsGeert Uytterhoeven
Register the Amiga-specific video modes with sysfs, so you can see them in /sys/class/graphics/fb0/modes and change the video mode by writing to /sys/class/graphics/fb0/mode. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20zorro: use memory_read_from_bufferakinobu.mita@gmail.com
zorro: use memory_read_from_buffer Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ZORRO: Replace deprecated __initcall with equivalent device_initcall.Robert P. J. Day
ZORRO: Replace deprecated __initcall with equivalent device_initcall. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20m68k: Return -ENODEV if no device is foundGeert Uytterhoeven
According to the tests in do_initcalls(), the proper error code in case no device is found is -ENODEV, not -ENXIO or -EIO. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ariadne: use netstats in net_device structurePaulius Zaleckas
Use net_device_stats from net_device structure instead of local. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20m68k: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Merge branch 'configfs-fixup-ptr-error' of ↵Linus Torvalds
git://oss.oracle.com/git/jlbec/linux-2.6 * 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6: configfs: Allow ->make_item() and ->make_group() to return detailed errors. Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
2008-07-20APCI: revert another duplicated patchThomas Gleixner
commit d1857056904d5f313f11184fcfa624652ff9620a ("ACPI: don't walk tables if ACPI was disabled") is another superfluous duplicate commit caused by git -> quilt -> git conversion. Revert it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20APCI: revert duplicated patchThomas Gleixner
commit 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") was merged between 2.6.26-rc8 and -rc9) Due to rebasing the ACPI tree via quilt the same patch got applied again via commit cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") Revert it, as it is obviously bogus. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Fix strip driver back up for ldisc/tty changesAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: add more tty_port fieldsAlan Cox
Move more bits into the tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20cyclades: use tty_portAlan Cox
Switch cyclades to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: Clean up tiocmsetAlan Cox
Reverse the order of one test and it gets much more readable Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20synclink: use tty_portAlan Cox
Switch the synclink ports to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20stallion: use tty_portAlan Cox
Switch the stallion driver to use the tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20atmel_serial: Fix tty_port breakageHaavard Skinnemoen
The tty pointer has been moved into a tty_port field, so we need to use ->info->port.tty instead of just ->info->tty. Fixes these build errors: David Brownell <david-b@pacbell.net> wrote: > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring': > drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma': > drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_startup': > drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty' > make[2]: *** [drivers/serial/atmel_serial.o] Error 1 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20rocket: use tty_portAlan Cox
Switch the rocketport to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20mxser: use tty_portAlan Cox
Switch mxser to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20moxa: use tty_portAlan Cox
Switch MOXA to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20istallion: use tty_portAlan Cox
Switch istallion to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20isicom: use tty_portAlan Cox
Switch isicom to use a tty_port structure for some fields Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20riscom8: remove bogus checksAlan Cox
Chris Malley posted a patch removing a NULL check in the riscom8 driver. Further analysis shows that even more of the tests are irrelevant so we can delete lots of stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20riscom8: use tty_portAlan Cox
Switch riscom8 to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20gs: use tty_portAlan Cox
Switch drivers using the old "generic serial" driver to use the tty_port structures Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20esp: use tty_portAlan Cox
Switch esp to use the new tty_port structures Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20epca: use tty_portAlan Cox
Switch the EPCA driver to include and begin using a tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20Fix compile errors in SGI console drivers (linux-next tree)Takashi Iwai
The below is the patch to replace blindly all possible places, including Jack's fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de> (Reviewed and checked rather than blindly added) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20- Fix compile errors in SGI console drivers (linux-next tree)Jack Steiner
Fix compile errors in SGI console drivers caused by changes to the tty_port structures in the linux-next tree. Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ttydev: fix pamc_zilog for tty pointer moveStephen Rothwell
Today's linux-next build (powerpc allyesconfig) failed like this: drivers/serial/pmac_zilog.c: In function 'pmz_receive_chars': drivers/serial/pmac_zilog.c:245: error: 'struct uart_info' has no member named 'tty' drivers/serial/pmac_zilog.c:250: error: 'struct uart_info' has no member named 'tty' I applied the patch below (which builds but may, or may not, be correct). -- Cheers, Stephen Rothwell sfr@canb.auug.org.au http://www.canb.auug.org.au/~sfr/ Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20ttydev: fix pamc_zilog for tty pointer moveStephen Rothwell
Today's linux-next build (sparc64 defconfig) failed like this: drivers/serial/sunhv.c: In function `receive_chars': drivers/serial/sunhv.c:188: error: structure has no member named `tty' drivers/serial/sunsu.c: In function `receive_chars': drivers/serial/sunsu.c:314: error: structure has no member named `tty' drivers/serial/sunsab.c: In function `receive_chars': drivers/serial/sunsab.c:121: error: structure has no member named `tty' I applied the following patch (which, again, may not be correct). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20serial: use tty_portAlan Cox
Switch the serial_core based drivers to use the new tty_port structure. We can't quite use all of it yet because of the dynamically allocated extras in the serial_core layer. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: Introduce a tty_port common structureAlan Cox
Every tty driver has its own concept of a port structure and because they all differ we cannot extract commonality. Begin fixing this by creating a structure drivers can elect to use so that over time we can push fields into this and create commonality and then introduce common methods. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20drivers/serial/: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time in comments, printk's and MODULE_DESCRIPTION's (no printk's or MODULE_DESCRIPTION's are completely removed). While doing this I also found and fixed a missing \n in a printk in m32r_sio.c Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20drivers/char/rio/: remove VCS tagsAdrian Bunk
This patch removes ancient VCS tags (either protected by #ifdef SCCS_LABELS or commented out). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>