aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-12-08drm/i915: Remove a debugging printk from hangcheckChris Wilson
A residual bare printk survived the merger of the hang detector, remove this debugging left-over. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-08drm/i915: restore render clock gating on resumeAndrew Lutomirski
Rather than restoring just a few clock gating registers on resume, just reinitialize the whole thing. Signed-off-by: Andy Lutomirski <luto@mit.edu> [anholt: Fixed up for RC6 support landed since the patch was written] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07drm/i915: Set the error code after failing to insert new offset into mm ht.Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07drm/i915: Report purgeable status in buffer lists.Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07agp/intel-agp: Clear entire GTT on startupDavid Woodhouse
Some BIOSes fail to initialise the GTT, which will cause DMA faults when the IOMMU is enabled. We need to clear the whole thing to point at the scratch page, not just the part that Linux is going to use. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> [anholt: Note that this may also help with stability in the presence of driver bugs, by not drawing to memory we don't own] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07drm/i915: Fix product names and #definesAdam Jackson
IGD* isn't a useful name. Replace with the codenames, as sourced from pci.ids. Signed-off-by: Adam Jackson <ajax@redhat.com> [anholt: Fixed up for merge with pineview/ironlake changes] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07agp/intel: Fix product names and #definesAdam Jackson
IGD* isn't a useful name. Replace with the codenames, as sourced from pci.ids. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07drm/i915: Drop a some common DRM_ERROR()Chris Wilson
These are handled by the error return being propagated to user-space and do not any add any information to the original error, so are useless. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07drm/i915: warn if Pineview CxSR can't be enabledJesse Barnes
If we don't detect a supported memory configuration, we can't enable CxSR. Warn the user in this case so they can file a bug.
2009-12-07drm/i915: pageflip fixesJesse Barnes
This patch brings the tree up to date with some fixes that were in a more recent version of the page flipping patch you applied. It fixes pre-965 flip support, removes a leftover hack that forced alignment, and initializes the pipe & plane CRTC mappings. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: Declare the new VBT parsing functions as staticZhao Yakui
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: Add the missing clonemask for display port on IronlakeZhao Yakui
Add the missing clonemask for display port on Ironlake. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: fix the incorrect condition judgement in dp_is_present_in_vbtZhao Yakui
We were always looking for the PORT_IDPB entry. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: Fix DDC on some systems by clearing BIOS GMBUS setup.Eric Anholt
This is a sync of a fix I made in the old UMS code. If the BIOS uses the GMBUS and doesn't clear that setup, then our bit-banging I2C can fail, leading to monitors not being detected. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: Add 30ms delay to make SDVO TV detection reliable.Zhao Yakui
Without this, on some boots the TV wouldn't be detected. Testing showed 15ms to be insufficient. https://bugs.freedesktop.org/show_bug.cgi?id=24290 https://bugs.freedesktop.org/show_bug.cgi?id=20785 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Tested-by: Yan Seiner <yan@seiner.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: Fix sync to vblank when VGA output is turned offLi Peng
In current vblank-wait implementation, if we turn off VGA output, drm_wait_vblank will still wait on the disabled pipe until timeout, because vblank on the pipe is assumed be enabled. This would cause slow system response on some system such as moblin. This patch resolve the issue by adding a drm helper function drm_vblank_off which explicitly clear vblank_enabled[crtc], wake up any waiting queue and save last vblank counter before turning off crtc. It also slightly change drm_vblank_get to ensure that we will will return immediately if trying to wait on a disabled pipe. Signed-off-by: Li Peng <peng.li@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [anholt: hand-applied for conflicts with overlay changes] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: disable the interrupt hotplug for integrated TV outputAdam Jackson
Otherwise, I'd get stuck in a loop where (afaict) output scan would trigger a TV interrupt, which would trigger a scan, etc. TV load detection not being the fastest thing in the world, X would process requests very slowly. https://bugs.freedesktop.org/show_bug.cgi?id=24404 Signed-off-by: Adam Jackson <ajax@redhat.com> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: Don't update the render-clock for every bo.Chris Wilson
Only update the render-clock on transition from busy to idle and vice versa, or else we burn a significant percentage of the cpu just rewriting the register -- not quite as power-friendly as intended ;-) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: Fix LVDS presence checkAdam Jackson
Assume that either the presence of an LVDS entry in the VBT or an ACPI lid device indicates an LVDS device. ACPI lid alone is not sufficient. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: Fix warning introduced with the page flipping ioctl.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm/i915: add GETPARAM request for page flippingJesse Barnes
Add a GETPARAM request for checking if page flipping is supported. Useful for the 2D driver to enable the flipping path. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01drm: use page flip event to signal flip completionJesse Barnes
We don't actually know which frame number the flip will complete on, so userspace needs a specific flip notification to tell it when the last flip completed. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2009-12-01drm/i915: Add intel implementation of the pageflip ioctlKristian Høgsberg
Acked-by: Jakob Bornecrantz <jakob@vmware.com> Acked-by: Thomas Hellström <thomas@shipmail.org> Review-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse "Orange Smoothie" Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01Merge remote branch 'airlied/drm-next' into drm-intel-nextEric Anholt
2009-12-01drm/i915: PineView only has LVDS and CRT portsZhenyu Wang
PineView only has 2 ports for LVDS and CRT. Don't enable other ports for it. Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: Don't set up the TV port if it isn't in the BIOS table.Zhao Yakui
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: Don't set up the LVDS if it isn't in the BIOS device table.Zhao Yakui
We not only check the device type, but also check the addin_offset. If the addin_offset is zero, it won't be initialized. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> [anholt: hand-applied due to conflicts]
2009-11-30drm/i915: Don't set up DP ports that aren't in the BIOS device table.Zhao Yakui
Use the child device array to decide whether the given DP output should be initialized. If the given DP port can't be found in child device array, it is not present and won't be initialized. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: Don't set up HDMI ports that aren't in the BIOS device table.Zhao Yakui
Use the child device array to decide whether the given HDMI output should be initialized. If the given HDMI port can't be found in child device array, it is not present and won't be initialized. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: parse child device from VBTZhao Yakui
On some laptops there is no HDMI/DP. But the xrandr still reports several disconnected HDMI/display ports. In such case the user will be confused. >DVI1 disconnected (normal left inverted right x axis y axis) >DP1 disconnected (normal left inverted right x axis y axis) >DVI2 disconnected (normal left inverted right x axis y axis) >DP2 disconnected (normal left inverted right x axis y axis) >DP3 disconnected (normal left inverted right x axis y axis) This patch set is to use the child device parsed in VBT to decide whether the HDMI/DP/LVDS/TV should be initialized. Parse the child device from VBT. The device class type is also added for LFP, TV, HDMI, DP output. https://bugs.freedesktop.org/show_bug.cgi?id=22785 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: Disable pwrctx before unpin and freeKristian Høgsberg
Otherwise the chip may scribble over free memory. Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: Hold struct_mutex while unreffing pwrctx objectKristian Høgsberg
This also extends the mutex to cover fbc disabling, which is safe. Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: Unregister i915_wedged debugfs entry using the right keyKristian Høgsberg
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: fix gpio register detection logic for BIOS without VBTShaohua Li
if no VBT is present, crt_ddc_bus will be left at 0, and cause us to use that for the GPIO register offset. That's never a valid register offset, so let the "undefined" value be 0 instead of -1. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> [anholt: clarified the commit message a bit]
2009-11-30drm/i915: Avoid NULL dereference with component_only tv_modesChris Wilson
In commit d2d9f2324, the guard for a valid video mode was removed. This caused the regression: kernel crash during kms graphic boot on Intel GM4500 platform https://bugzilla.redhat.com/show_bug.cgi?id=540218 This patches changes the logic slightly not to rely on a coupled variable, but to just check whether the video_modes is valid before dereferencing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Zhenyu Wang <zhenyu.z.wang@intel.com> [ickle: Actually reference the correct bug report] Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: fixup interrupted overlay switch off callsDaniel Vetter
When switching to interruptible sleeps in the overlay code, I've forgotten to recover from interruptions at one site. This resulted in the overlay still running when it should have been switched off. This in turn caused a hang on resume because it tried to disable the (not-running) overlay in preparation for the resume modeset. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=24980 Tested-by: maximlevitsky@gmail.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: overlay: extract some duplicated codeDaniel Vetter
I've suspected some bug there wrt to suspend, but that was not the case. Clean up the code anyway. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30drm/i915: remove Pineview EOS protection supportShaohua Li
HW guys have an evaluation about the impact about EOS, and say the impact is quite small, so they have removed EOS detection support. This patch removes EOS feature. revert commit 043029655816ed4cfc2ed247020ef97e5d637392 directly reverting it gives a hunk error, so please use this one. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> [anholt: fixed up commit message for update that the feature's really gone]
2009-11-30drm/i915: use msleep for intel_wait_for_vblankShaohua Li
20ms delay is quite big and the routine isn't called in atomic context. better use msleep to let other tasks run. This can reduce cpu time used by Xorg, so potentially boost boot. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25drm/i915: handle failure path correctly for lvdsShaohua Li
In failure path, make sure encoder is cleaned up, otherwise there is a kernel oops. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25drm/i915: Fix LVDS stability issue on IronlakeZhenyu Wang
In disable sequence, all output ports on PCH have to be disabled before PCH transcoder, but LVDS port was left always enabled. This one fixes that by disable LVDS port properly during pipe disable process, and resolved stability issue seen on Ironlake. Also move panel fitting disable time just after pipe disable to align with the spec. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25drm/i915: Restore the DPLL calculation logic for 9xx platformZhao Yakui
The DPLL calculation logic for 9xx platform is changed in: commit 652c393a3368af84359da37c45afc35a91144960 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Mon Aug 17 13:31:43 2009 -0700 drm/i915: add dynamic clock frequency control Maybe we will get the different M/N/P combination with that by using the previous dpll calculation logic. So restore the DPLL calculation logic for 9xx platform. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25drm/i915: Check whether the LVDS downclock is found in VBTZhao Yakui
Enumerate the LVDS panel timing info entry list in VBT to check whether the LVDS downclock is found. If found, the downclock is also used to switch dynamically between low and high frequency for LVDS. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25drm/i915: Enable LVDS downclock feature through EDID.Zhao Yakui
If more than one mode with the same resolution defined in EDID has different refresh rate, it is thought that the downclock is found for LVDS. We will program the different FPx0/1 register so that we can select dynamically between the low and high frequency. On the g4x platform we will use the CxSR feature to switch the different refresh rate if the LVDS downclock feature is supported. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25drm/i915: Replace a calloc followed by copying data over it with malloc.Eric Anholt
Execbufs involve quite a bit of payload, to the extent that cache misses show up in the profiles here, and a suspicion that some of those cachelines may get evicted and then reloaded in the subsequent copy. This is still abstracted like drm_calloc_large since we want to check for size overflow, and because we want to choose between kmalloc and vmalloc on the fly. cairo's interface for malloc-with-calloc's-args was used as the model. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-18Merge branch 'drm-core-next' of ../linux-2.6 into drm-nextDave Airlie
2009-11-18drm/kms: add page flipping ioctlKristian Høgsberg
This adds a page flipping ioctl to the KMS API. The ioctl takes an fb ID and a ctrc ID and flips the crtc to the given fb at the next vblank. The ioctl returns immediately but the flip doesn't happen until after any rendering that's currently queued up against the new framebuffer is done. After submitting a page flip, any execbuffer involving the old front buffer will block until the flip is completed. Optionally, a vblank event can be generated when the swap eventually happens. Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18drm: check return values in drm_versionAndres Salomon
In drm_version, actually check the results from function calls so that we're not potentially passing garbage back to userspace. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18drm: replace DRM_COPY macro w/ a functionAndres Salomon
Don't inline it; the compiler can figure it out. Comments added that are based upon my interpretation of the code. Hopefully they're correct. :) Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18drm: kill more unused DRM macrosAndres Salomon
There are a few more macros in drmP.h that are unused; DRM_GET_PRIV_SAREA, DRM_ARRAY_SIZE, and DRM_WAITCOUNT can go away completely. Unfortunately, DRM_COPY is still used in one place, but we can at least move it to where it's used. It's an awful looking macro.. [akpm: fix overeagerness] Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 14:38:49 +0000