aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-04-13tg3: fix big endian MAC address collection failureJames Bottomley
We noticed on parisc that our broadcoms all swapped MAC addresses going from 2.6.29 to 2.6.30-rc1: Apr 11 07:48:24 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:4b:15:59 Apr 13 07:34:34 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:00:59:15:4b:6e The problem patch is: commit 6d348f2c1e0bb1cf7a494b51fc921095ead3f6ae Author: Matt Carlson <mcarlson@broadcom.com> Date: Wed Feb 25 14:25:52 2009 +0000 tg3: Eliminate tg3_nvram_read_swab() With the root cause being the use of memcpy to set the mac address: memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2); memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo)); This might work on little endian machines, but it can't on big endian ones. You have to use the original setting mechanism to be correct on all architectures. The attached patch fixes parisc. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-13Bonding: fix zero address hole bug in arp_ip_target listBrian Haley
Fix a zero address hole bug in the bonding arp_ip_target list that was causing the bond to ignore ARP replies (bugz 13006). Instead of just setting the array entry to zero, we now copy any additional entries down one slot, putting the zero entry at the end. With this change we can now have all the loops that walk the array stop when they hit a zero since there will be no addresses after it. Changes are based in part on code fragment provided in kernel: bugzilla 13006: http://bugzilla.kernel.org/show_bug.cgi?id=13006 by Steve Howard <steve@astutenetworks.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11igb: do not check for vf_data if we didn't enable vfsAlexander Duyck
The driver is currently dumping a message in the log about failing to allocate vf data when max_vfs is equal to 0. This change makes it so the error message is only displayed if we set max_vfs to a non zero value. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11igbvf: fix unused external referencesAlexander Duyck
The igbvbf driver exposed several unused extrnal references due to the fact that code was copied from igb and then some functionality was removed. This changes that so that unused functions are either removed or made static. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11igb: fix unused external references introduced with sr-iov changesAlexander Duyck
There were several unused external references added with the sr-iov enablement changes. This patch changes all those references to static local references. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ether3: convert to net_device_opsAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ether1: convert to net_device_opsAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ep93xx_eth: convert to net_device_opsAlexander Beregalov
Also make ep93xx_dev_alloc static. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11at91_ether: convert to net_device_opsAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11am79c961a: convert to net_device_opsAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ariadne: convert to net_device_opsAlexander Beregalov
On Fri, Apr 10, 2009 at 06:13:54PM +0200, Jan Ceuleers wrote: > Alexander Beregalov wrote: > > > > Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> > ... > > @@ -197,13 +209,8 @@ static int __devinit ariadne_init_one(struct zorro_dev *z, > > dev->mem_start = ZTWO_VADDR(mem_start); > > dev->mem_end = dev->mem_start+ARIADNE_RAM_SIZE; > > > > - dev->open = &ariadne_open; > > - dev->stop = &ariadne_close; > > - dev->hard_start_xmit = &ariadne_start_xmit; > > - dev->tx_timeout = &ariadne_tx_timeout; > > + dev->netdev_ops = &ariadne_netdev_ops;; > > We don't really need two semicolons there but I suppose that they won't > hurt. Thanks! David, please apply this patch Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ibm_newemac: convert to netdev_opsAlexander Beregalov
Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11fs_enet: convert to netdev_opsAlexander Beregalov
Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11via-velocity : fix compilation warning.Séguier Régis
Fix this warning: drivers/net/via-velocity.c:1924: warning: passing argument 2 of 'request_irq' from incompatible pointer type Signed-off-by: Seguier Regis <rseguier@e-teleport.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11phy: error handling for platform_device_register_simple()Dan Carpenter
platform_device_register_simple() returns ERR_PTR() and not NULL. Found by smatch (http://repo.or.cz/w/smatch.git). Compile tested. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: only allow WOL for 82599 KX4 NICAlexander Duyck
All NICs were reporting WOL support when only the KX4 NIC is capable of supporting WOL. This patch adds a function to check for and exclude all non-WOL capable nics from enabling WOL in ethtool. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11ixgbe: Move the LED blink code to common, since 82599 also uses itPJ Waskiewicz
The LED blink code is common for 82599 as well. It should be moved to ixgbe_common.c so both devices can use it, and not have it duplicated. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-09forcedeth: Use napi_complete() not __napi_complete().David S. Miller
It's not enough that forcedeth's interrupts are disabled, local cpu interrupts have to unconditionally be off when we remove the device from the poll list. Based upon a crash report from Alexander Beregalov <a.beregalov@gmail.com>: WARNING: at lib/list_debug.c:30 __list_add+0x89/0x90() Hardware name: list_add corruption. prev->next should be next (c06ea834), but was f70244c8. (prev=c06ea834). Modules linked in: w83627hf hwmon_vid i2c_nforce2 Pid: 1436, comm: portageq Not tainted 2.6.30-rc1 #1 Call Trace: [<c0129d73>] warn_slowpath+0x73/0xd0 [<c03c6008>] ? __kfree_skb+0x38/0x90 [<c03f9b06>] ? tcp_data_snd_check+0x26/0xe0 [<c03fd67f>] ? tcp_rcv_established+0x2bf/0x5e0 [<c040557a>] ? tcp_v4_rcv+0x47a/0x610 [<c014cebd>] ? print_lock_contention_bug+0x1d/0x110 [<c044a967>] ? _spin_unlock+0x27/0x50 [<c040564b>] ? tcp_v4_rcv+0x54b/0x610 [<c02d86f9>] __list_add+0x89/0x90 [<c03ccff9>] __napi_schedule+0x29/0x60 [<c036946d>] e1000_intr+0xbd/0x1a0 [<c015c5de>] handle_IRQ_event+0x3e/0x120 [<c015e190>] handle_fasteoi_irq+0x60/0xd0 [<c0104fd4>] handle_irq+0x34/0x60 [<c015f748>] ? rcu_irq_enter+0x8/0x40 [<c0104b29>] do_IRQ+0x39/0xa0 [<c03c592c>] ? skb_release_head_state+0x2c/0x60 [<c01034ee>] common_interrupt+0x2e/0x34 [<c02d8601>] ? list_del+0x21/0x90 [<c014e54b>] ? trace_hardirqs_on+0xb/0x10 [<c03cd4da>] __napi_complete+0x1a/0x30 [<c0381971>] nv_napi_poll+0xd1/0x5c0 [<c014e54b>] ? trace_hardirqs_on+0xb/0x10 [<c03cd5f6>] net_rx_action+0x106/0x1b0 [<c012e8df>] __do_softirq+0x6f/0x100 [<c044a967>] ? _spin_unlock+0x27/0x50 [<c015e1b8>] ? handle_fasteoi_irq+0x88/0xd0 [<c012e9cd>] do_softirq+0x5d/0x70 [<c012ebad>] irq_exit+0x7d/0xa0 [<c0104b32>] do_IRQ+0x42/0xa0 [<c012e9b7>] ? do_softirq+0x47/0x70 [<c01034ee>] common_interrupt+0x2e/0x34 Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08igb: remove sysfs entry that was used to set the number of vfsAlexander Duyck
This patch removes the sysfs entry num_vfs which was added to support enabling pci virtual functions for 82576. To prevent VFs from loading automatically a module parameter "max_vfs" was added so that the number of VFs per PF can be limited. This is especially useful when 4 or more 82576 ports are on the system because otherwise to load all VFs would result in 8 interface per physical port. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08igbvf: add new driver to support 82576 virtual functionsAlexander Duyck
This adds an igbvf driver to handle virtual functions provided by the igb driver when SR-IOV has been enabled. A virtual function is a lightweight pci-e function that supports a single queue and shares resources with the 82576 physical function contained within the igb driver. To spawn virtual functions from the igb driver all that is needed is to enable CONFIG_PCI_IOV and have an 82576 Ethernet adapter on a system that supports SR-IOV in the BIOS. The virtual functions will appear after the interface is loaded. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08drivers/net/eql.c: Fix a dev leakage.Yang Hongyang
After dev_get_by_name(), we should follow a dev_put(). Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08niu: Fix unused variable warning.David S. Miller
Don't strain gcc's tiny mind. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08r6040: set MODULE_VERSIONFlorian Fainelli
This patch sets MODULE_VERSION in order to help users track changes to this module. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08bnx2: Don't use reserved namesBastian Blank
The mips identifier is reserved by gcc on mips plattforms. Don't use it in the code. Signed-off-by: Bastian Blank <waldi@debian.org> Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08FEC driver: add missing #endifSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08niu: Fix error handlingDan Carpenter
platform_device_register_simple() returns ERR_PTR(), not NULL, if an error occurs. Found by smatch (http://repo.or.cz/w/smatch.git). Compile tested. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08mv643xx_eth: don't reset the rx coal timer on interface upLennert Buytenhek
Move SDMA configuration from interface up to port probe, to prevent overwriting the receive coalescing timer value on interface up. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08smsc911x: correct debugging message on mii read timeoutSteve Glendinning
the warning printed when a mii READ times out currently says "Timed out waiting for MII write to finish". This patch corrects this. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08ethoc: fix library build errorsRandy Dunlap
ethoc indirectly uses crc32_le() and bitrev32(), so select those library functions to be built. drivers/built-in.o: In function `ethoc_set_multicast_list': ethoc.c:(.text+0x6226f): undefined reference to `crc32_le' ethoc.c:(.text+0x62276): undefined reference to `bitrev32' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: pci_slot: grab refcount on slot's bus PCI Hotplug: acpiphp: grab refcount on p2p subordinate bus PCI: allow PCI core hotplug to remove PCI root bus PCI: Fix oops in pci_vpd_truncate PCI: don't corrupt enable_cnt when doing manual resource alignment PCI: annotate pci_rescan_bus as __ref, not __devinit PCI-IOV: fix missing kernel-doc PCI: Setup disabled bridges even if buses are added PCI: SR-IOV quirk for Intel 82576 NIC
2009-04-07Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: loop: mutex already unlocked in loop_clr_fd() cfq-iosched: don't let idling interfere with plugging block: remove unused REQ_UNPLUG cfq-iosched: kill two unused cfqq flags cfq-iosched: change dispatch logic to deal with single requests at the time mflash: initial support cciss: change to discover first memory BAR cciss: kernel scan thread for MSA2012 cciss: fix residual count for block pc requests block: fix inconsistency in I/O stat accounting code block: elevator quiescing helpers
2009-04-07Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: shorten register names sata_mv: workaround errata SATA#13 sata_mv: cosmetic renames sata_mv: workaround errata SATA#26 sata_mv: workaround errata PCI#7 sata_mv: replace 0x1f with ATA_PIO4 (v2) sata_mv: fix irq mask races sata_mv: revert SoC irq breakage libata: ahci enclosure management bios workaround ata: Add TRIM infrastructure ata_piix: VGN-BX297XP wants the controller power up on suspend libata: Remove some redundant casts from pata_octeon_cf.c pata_artop: typo
2009-04-07Merge branch 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: imx: Make disable_delay a per-device variable i2c: xtensa s6000 i2c driver powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates board i2c: i2c-mpc: make I2C bus speed configurable i2c: i2c-mpc: use dev based printout function i2c: i2c-mpc: various coding style fixes i2c: imx: Add missing request_mem_region in probe() i2c: i2c-s3c2410: Initialise Samsung I2C controller early i2c-s3c2410: Simplify bus frequency calculation i2c-s3c2410: sda_delay should be in ns, not clock ticks i2c: iMX/MXC support
2009-04-07Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: Add Asus ATK0110 support hwmon: (lm95241) Convert to new-style i2c driver
2009-04-07parport: Use the PCI IRQ if offeredAlan Cox
PCI parallel port devices can IRQ share so we should stop them hogging the line and making a mess on modern PC systems. We know the sharing side works as the PCMCIA driver has shared the parallel port IRQ for some time. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07tty: jsm cleanupsBreno Leitao
Here are some cleanups, mainly removing unused variables and silly declarations. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Adjust path to gpio headersMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07KGDB_SERIAL_CONSOLE check for moduleMike Frysinger
Depend on KGDB_SERIAL_CONSOLE being set to N rather than !Y, since it can be built as a module. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Change KCONFIG nameMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07tty: Blackin CTS/RTSSonic Zhang
Both software emulated and hardware based CTS and RTS are enabled in serial driver. The CTS RTS PIN connection on BF548 UART port is defined as a modem device not as a host device. In order to test it under Linux, please nake a cross UART cable to exchange CTS and RTS signal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Change hardware flow control from poll to interrupt drivenSonic Zhang
Only the CTS bit is affected. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Add support for the MAX3100 SPI UART.Christian Pellegrin
(akpm: queued pending confirmation of the new major number) [randy.dunlap@oracle.com: select SERIAL_CORE] Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07serqt: initial clean up pass for tty sideAlan Cox
Avoid using port->tty where possible (makes refcount fixing easier later). Remove unused code (the ioctl path is not used if the device has mget/mset functions) Remove various un-needed typecasts and long names so it could read it to do the changes. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07tty: Use the generic RS485 ioctl on CRISClaudio Scordino
Use the new general RS485 Linux data structure (introduced by Alan with commit number c26c56c0f40e200e61d1390629c806f6adaffbcc) in the Cris architecture too (currently, Cris still uses the old private data structure instead of the new one). Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Tested-by: Hinko Kocevar <hinko.kocevar@cetrtapot.si> Tested-by: Janez Cufer <janez.cufer@cetrtapot.si> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24)Yang Hongyang
Replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)Yang Hongyang
Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)Yang Hongyang
Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31)Yang Hongyang
Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39)Yang Hongyang
Replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 19:47:53 +0000