aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-12-24[PATCH] forcedeth: fix random memory scribbling bugManfred Spraul
Two critical bugs were found in forcedeth 0.47: - TSO doesn't work. - pci_map_single() for the rx buffers is called with size==0. This bug is critical, it causes random memory corruptions on systems with an iommu. Below is a minimal fix for both bugs, for 2.6.15. TSO will be fixed properly in the next version. Tested on x86-64. Signed-Off-By: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-12-22[SPARC]: introduce a SPARC Kconfig symbolAdrian Bunk
Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22[SUNGEM]: Fix link error with CONFIG_HOTPLUG disabled.Adrian Bunk
gem_remove_one() is called from the __devinit gem_init_one(). Therefore, gem_remove_one() mustn't be __devexit. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22Pull bug3410 into release branchLen Brown
2005-12-22Pull owner_id into release branchLen Brown
2005-12-22[ACPI] fix build warning from owner_id patchLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-22[ACPI] fix passive cooling regressionThomas Renninger
Return logic was inverted. Going for changing the return value to not return zero as it is makes more sense regarding the naming of the function (cpu_has_cpufreq()). http://bugzilla.kernel.org/show_bug.cgi?id=3410 Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-22V4L/DVB (3191): Fix CC outputHans Verkuil
- CC data was swapped the wrong way around. - Enabling CC disabled XDS and vice versa: these two should be independent from one another. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-22V4L/DVB (3200): Fix saa7134 ALSA/OSS collisionsRicardo Cerqueira
- When ALSA or OSS are loaded, check if the other is present Fixed hotplug notifiers cleanup on module removal - The saa7134 DMA sound modules now have their own Kconfig entries, and if built statically enforce exclusivity - SND_PCM_OSS isn't necessary for the OSS driver Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-21Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
2005-12-21Initialize drivers/media/video/saa7134 lateLinus Torvalds
When compiled-in, make sure the sound system has initialized before these drivers do. Reported by Adrian Bunk <bunk@stusta.de> (The right fix would be to make the sound core use "subsys_initcall()" and thus initialize before all normal drivers, but this is the quick and limited safe fix for 2.6.15). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21[PATCH] usbcore: allow suspend/resume even if drivers don't support itAlan Stern
This patch (as618) changes usbcore to prevent derailing the suspend/resume sequence when a USB driver doesn't include support for it. This is a workaround rather than a true fix; the core needs to be changed so that URB submissions from suspended drivers can be refused and outstanding URBs cancelled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21[PATCH] USB Storage: Force starget->scsi_level in usb-storage scsiglue.cPaul Walmsley
When the usb-storage module forces sdev->scsi_level to SCSI_2, it should also force starget->scsi_level to the same value. Otherwise, the SCSI layer may attempt to issue SCSI-3 commands to the device, such as REPORT LUNS, which it cannot handle. This can prevent the device from working with Linux. The AMS Venus DS3 DS2316SU2S SATA-to-SATA+USB enclosure, based on the Oxford Semiconductor OXU921S chip, requires this patch to function correctly on Linux. The enclosure reports a SCSI-3 SPC-2 command set level, but does not correctly handle the REPORT LUNS SCSI command - probably due to a bug in its firmware. It seems likely that other USB storage enclosures with similar bugs will also benefit from this patch. Tony Lindgren <tony@atomide.com> collaborated in the development of this patch. Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
2005-12-21[ACPI] increase owner_id limit to 64 from 32Alex Williamson
This is an interim patch until changes in an updated ACPICA core increase the limit to 255. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-20[PATCH] Fix framebuffer console upside-down ywrap scrollingKnut Petersen
Whenever ywrap scrolling is selected together with 180 degree screen rotation, 2.6.15-rc6 and earlier versions are broken. fb_pan_display() expects non-negative yoffsets, but ud_update_start() calls it with yoffsets down to -(yres - font height). This patch transforms yoffset to the correct range 0 ... vyres-1. Some obviously unneeded parentheses are removed, too. Verified with cyblafb, should be applied before 2.6.15-final because it does fix the framebuffer rotation code introduced early in the 2.6.15 release cycle. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] intelfb: Fix oops when changing video modeAntonino A. Daplas
Reported by: janis huang (Bugzilla Bug 5747) Fix on oops in intelfb. Not sure what's happening, looks like dinfo->name pointer is invalidated after initialization. Remove intelfb_get_fix, it's not needed and move the majority of the code to the initialization routine. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] intelfb: Fix freeing of nonexistent resourceAntonino A. Daplas
Fix intelfb trying to free a non-existent resource in its error path. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] powerpc: g5 thermal overtemp bugBenjamin Herrenschmidt
The g5 thermal control for liquid cooled machines has a small bug, when the temperatures gets too high, it boosts all fans to the max, but incorrectly sets the liquids pump to the min instead of the max speed, thus causing the overtemp condition not to clear and the machine to shut down after a while. This fixes it to set the pumps to max speed instead. This problem might explain some of the reports of random shutdowns that some g5 users have been reporting in the past. Many thanks to Marcus Rothe for spending a lot of time trying various patches & sending log logs before I found out that typo. Note that overtemp handling is still not perfect and the machine might still shutdown, that patch should reduce if not eliminate such occcurences in "normal" conditions with high load. I'll implement a better handling with proper slowing down of the CPUs later. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-19Merge branch 'to_linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb
2005-12-19[PATCH] md: Change case of raid level reported in sys/mdX/md/levelNeil Brown
I had thought that keeping the reported tail level clearly different from the module name was a good idea, but I've changed my mind. 'raid5' is better and probably less confusing than 'RAID-5'. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/tg3-2.6Linus Torvalds
2005-12-19[TG3]: Fix ethtool memory testMichael Chan
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test. Overwriting memory in this region can cause ASF problems. Update version and release date. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Add tw32_wait_f() for some sensitive registersMichael Chan
The tw32_f() function (register write with immediate read flush) can hang when used on some registers to switch clock frequencies and power. A new tw32_wait_f() is added for such registers with the delay before the read and after the read. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Some low power fixesMichael Chan
Add some missing workarounds in tg3_set_power_state(): 1. Workaround to prevent overdrawing current on 5714. 2. Do not power down 5700's PHY because of hw limitation. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Fix peer device handlingMichael Chan
Locate the pdev_peer for dual port 5714 NIC devices in addition to 5704 devices. The name is also changed to tg3_find_peer() from tg3_find_5704_peer(). It is also necessary to call netdev_priv() to get to the peer's private tg3 structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[SPARC]: Fix RTC build failure.Adrian Bunk
On sparc and sparc64, the rtc driver doesn't compile with PCI support disabled. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[PATCH] V4L/DVB (3189): Fix a broken logic that didn't cover all standards.Mauro Carvalho Chehab
- Fix a broken logic that didn't cover all standards. - Fix compilation failure with gcc 2.95.3. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-19[PATCH] V4L/DVB (3181): Enable SPDIF output for DVB-S rev 2.3Oliver Endriss
- Enable SPDIF output for DVB-S rev 2.3. Firmware 2623 or higher required. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-19[PATCH] V4L/DVB (3180): Fix tuner 100 definition for hauppauge eepromRicardo Cerqueira
- Tuner 100 is the TUNER_PHILIPS_FMD1216ME_MK3, not TUNER_ABSENT. This was causing the tuner module to be skipped, and rendered boards with this value in the eeprom (like the HVR1100) unable to tune Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-19[PATCH] V4L/DVB (3188): Fix compilation failure with gcc 2.95.3.Jean Delvare
- Fix compilation failure with gcc 2.95.3. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-18Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394
2005-12-18[PATCH] mtd onenand driver: use platform_device.h instead device.hKyungmin Park
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18[PATCH] mtd onenand driver: reduce stack usageKyungmin Park
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18[PATCH] mtd onenand driver: fix unlock problem in DDPKyungmin Park
2005-12-18[PATCH] mtd onenand driver: check correct manufacturerKyungmin Park
This (and the three subsequent patches) is working well on OMAP H4 with 2.6.15-rc4 kernel and passes the LTP fs test. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18[PATCH] radeon drm: fix compilation breakage with gcc 2.95.3Jean Delvare
Fix a typo which breaks radeon drm compilation with gcc 2.95.3. The offending line was added back in 2.6.11-rc3, but was harmless back then. A recent addition nearby changed it into a compilation breaker: commit 281ab031a8c9e5b593142eb4ec59a87faae8676a. The doubled semi-colon ends up being an empty instruction, and the variable declaration thus ends up being in the middle of "code". Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18[PATCH] Input: fix an OOPS in HID driverDmitry Torokhov
This patch fixes an OOPS in HID driver when connecting simulation devices generating unknown simulation events. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18[PATCH] dpt_i2o fix for deadlock conditionSalyzyn, Mark
Miquel van Smoorenburg <miquels@cistron.nl> forwarded me this fix to resolve a deadlock condition that occurs due to the API change in 2.6.13+ kernels dropping the host locking when entering the error handling. They all end up calling adpt_i2o_post_wait(), which if you call it unlocked, might return with host_lock locked anyway and that causes a deadlock. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18[PATCH] i2o: Do not disable pci device when it's in useBen Collins
When dpt_i2o is loaded first, i2o being loaded would cause it to call pci_device_disable, thus breaking dpt_i2o's use of the device. Based on similar usage of pci_disable_device in other drivers. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-17[SCSI] fix scsi_reap_target() device_del from atomic contextJames Bottomley
scsi_reap_target() was desgined to be called from any context. However it must do a device_del() of the target device, which may only be called from user context. Thus we have to reimplement scsi_reap_target() via a workqueue. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-16[PATCH] ppc: booke_wdt compile fixAl Viro
booke_wdt.c had been missed in cpu_specs[] removal sweep Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16Merge with http://kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitJody McIntyre
2005-12-16[PATCH] UHCI: add missing memory barriersAlan Stern
This patch (as617) adds a couple of memory barriers that Ben H. forgot in his recent suspend/resume fix. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16[PATCH] PCI express must be initialized before PCI hotplugMilton Miller
PCI express hotplug uses the pcieportbus driver so pcie must be initialized before hotplug/. This patch changes the link order. Signed-Off-By: Milton Miller <miltonm@bga.com> Acked-by: Anton Blanchard <anton@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16[PATCH] i2c: Fix i2c-mv64xxx compilation errorMark A. Greer
The busses/i2c-mv64xxx.c driver doesn't currently compile because of an incorrect argument to dev_err(). This patch fixes that. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15[PATCH] radeon drm: fix agp aperture map offsetBenjamin Herrenschmidt
This finally fixes the radeon memory mapping bug that was incorrectly fixed by the previous patch. This time, we use the actual vram size as the size to calculate how far to move the AGP aperture from the framebuffer in card's memory space. If there are still issues with this patch, they are due to bugs in the X driver that I'm working on fixing too. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15[SCSI] fix for fc transport recursion problem.James.Smart@Emulex.Com
In the scenario that a link was broken, the devloss timer for each rport was expire at roughly the same time, causing lots of "delete" workqueue items being queued. Depth is dependent upon the number of rports that were on the link. The rport target remove calls were calling flush_scheduled_work(), which would interrupt the stream, and start the next workqueue item, which did the same thing, and so on until recursion depth was large. This fix stops the recursion in the initial delete path, and pushes it off to a host-level work item that reaps the dead rports. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15[PATCH] drivers/base/memory.c: unexport the static (sic) memory_sysdev_classAdrian Bunk
We can't export a static struct to modules. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 10:47:56 +0000