aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-08-22[SCSI] libfc: fc_rport_logoff should not drop the lockJoe Eykholt
fc_rport_logoff drops the rport lock in order to cancel work that may be pending. This is undesirable as the state can completely change, and the caller may not expect that the lock could've been dropped. If there is work pending, it will acquire the rdata mutex and so we're protected and can change the event from READY to DELETE. Queue the work only if there is no event already pending. There were a couple other cases where the state was set to DELETE and work queued, even though the state may have already been DELETE. Fix these using a common function fc_rport_enter_delete(). Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] libfc: rename rport state "NONE" to "DELETE".Joe Eykholt
State RPORT_ST_NONE was intented to be an invalid state (0), never used. This was a misguided attempt to be sure it was always initialized. Having an extra state meaning nothing requires switch statements to have a case covering that state. State NONE has been used instead to mean the remote port is being deleted. Changing the name to RPORT_ST_DELETE. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] libfc: fix WARNING from fc_seq_start_next on closed exchangesJoe Eykholt
We saw periodic messages like: WARNING: at drivers/scsi/libfc/fc_exch.c:825 fc_seq_start_next+0x30/0x4b This was due to trying to allocate a sequence in a request handler when the exchange had been reset. Delete the WARN_ON. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] libfc: in fc_lport_destroy, flush rports after turning off linkJoe Eykholt
During an fcoe module unload, we saw a problem where fc_rport_work() finds the lport has been freed. The rdata points to an area containing 0x6b6b6b6b... the pool poison value from kmem_free(). In fcoe_if_destroy() we call fc_fabric_logoff() then fc_lport_destroy(). fc_fabric_logoff() flushes the remote port work, but we're still receiving requests, and an RSCN or PLOGI arrives which creates more rports. Note that although the LLD also checks link_up, it doesn't do it under the lport mutex, so it can deliver frames to fc_lport_recv_req() even after link_up is cleared. So, re-check link_up there. We need to flush the rports by calling disc_stop_final() after we clear link_up. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] libfc: stop login after fabric logoffJoe Eykholt
When removing the fcoe module, several lports were being shut down through fc_lport_fabric_logoff(). Occasionally, one would enter reset state before fc_lport_destroy() was called, and since link_up was still true, it would log back in. If we just clear link_up earlier, then we wouldn't be accepting LOGO requests from other initiators while we are shutting down. Fix by changing the LOGO response handler to enter DISABLED instead of RESET. Add an fc_lport_enter_disabled() function which does what fc_lport_enter_reset() did, except it doesn't proceed to FLOGI state. Move the code that was common between fc_lport_enter_reset() and fc_lport_enter_disabled() into a new fc_lport_reset_locked() function. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] libfc: rename lport NONE state to DISABLEDJoe Eykholt
The state NONE was meant to be invalid, but has been used as the initial state. Rename it to be DISABLED, as more descriptive. Further patches will make it the like the RESET state, except it won't transition to FLOGI until fc_lport_fabric_login() is called. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] fcoe: stop delivery of received frames before doing lport_destroy()Joe Eykholt
To be more sure that no more input arrives at the local port as it is being destroyed, clean the queues in the per-cpu receive threads. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] fcoe: Call dev_ethtool_get_settings() in fcoe_link_okYi Zou
No need to check phys_dev here, just call dev_ethtool_get_settings() directly will take care of this. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] libfcoe: Set fip_flags according to fcf and lport's capability of ↵Yi Zou
SPMA support When encap the els for FIP, set the fip_flags according to the FCF and lport's capability of supporting SPMA or FPMA or both. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] fcoe: Fix validation of mac address when checking for spma supportYi Zou
Fix this bug of validating the wrong mac address while checking for SAN MAC address support from LLD as we should check ha->addr not ctlr.ctl_src_addr. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] ALUA: send STPG if explicit and implicit is supportedMike Christie
alua_activate only sends a STPG if only explicit is suppored. As a result, for EMC targets that support both we end up doing a implicit failover when X commands are finally sent to the other SP. This patch does a AND on the h->tpgs, so we do a explicit failover right away. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] scsi_transport_sas: fix incorrect duplicate setup of max_physJames Bottomley
There are two setup places for max_phys in scsi_transport_sas.c; one incorrectly places a NULL into host_attrs instead of port_attrs. Remove it. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] fc_transport: Correct max fc_host attribute countJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc 8.3.4: Update driver version to 8.3.4James Smart
Update driver version to 8.3.4 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc 8.3.4: Remove spaces before newlines in several log messagesJames Smart
Remove spaces before newlines in several log messages Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc 8.3.4: Add bsg (SGIOv4) support for ELS/CT supportJames Smart
Add bsg (SGIOv4) support for sending and receiving ELS, CT commands This patch adds a new file, lpfc_bsg.c. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc 8.3.4: NPIV vport fixesJames Smart
NPIV vport fixes - Fixed static vport creation on SLI4 HBAs - Fixed vport create sending init_vpi before REG_VFI - Fix unable to create vports on SLI4 HBA's Port2 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc 8.3.4: Fix a pair of FCoE issuesJames Smart
Fix a pair of FCoE issues - Fix Region 23 FCoE Parameters not being read correctly - Fix race condition when there are FCoE events during FCF table read Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc 8.3.4: Various SLI3 fixesJames Smart
Various SLI3 fixes - Fix for firmware dump failure - Fix inband remote management Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc 8.3.4: Consistently Implement persistent port disableJames Smart
Consistently implement persistent port disable. Ability was to be managed in the adapter via firmware via flash settings. However, not all firmware images supported it. Uniformly support it everywhere. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc 8.3.4: Various SLI4 fixesJames Smart
Various SLI4 fixes - Fix switch name not used in the FCF record for FCoE HBAs - Enabled HBA UE error polling error-condition action code - Rewrite lpfc_sli4_scmd_to_wqidx_distr() to handle counter rollover cleanly - Modify resume_rpi mailbox data structure to match current SLI4 spec - Do not issue mailbox command in MBX_POLL mode when LPFC_HBA_ERROR is set - Wait for HBA POST completion before checking Online and UE registers - Fix accumulated total length not being filled in on unsolicited IOCBs - Use PCI config space register to determine SLI rev of HBA - Turn on starting ELS tmo function timer during device initialization Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] fcoe: convert to %pMJohannes Berg
print_mac is being deprecated, and %pM makes for smaller code anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] lpfc: don't dereference NULLJiri Slaby
When kzalloc fails in lpfc_hba_alloc, don't dereference the NULL by lpfc_printf_log. Use dev_err instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-By: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] qla2xxx: Fix __LITTLE_ENDIAN definition warningsDave Jones
On ppc64, gcc 4.4 spews lots of.. drivers/scsi/qla2xxx/qla_def.h:1485:7: warning: "__LITTLE_ENDIAN" is not defined Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] bnx2i: register given device with cnic if shost != NULL in ep_connect()Anil Veerabhadrappa
When using iface, bnx2i was unable to offload further connections after all active sessions are logged out. bnx2i will unregister the device from cnic when the last connection is torn down. Next call to ep_connect() will fail because the device is not registered. This issue is not seen if shost == NULL is passed to ep_connect() call because in that case bnx2i will registers all known devices with cnic before doing a route look-up. When shost != NULL, bnx2i knows the device on which to offload the connection and has to register this device before attempting to offload the connection Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] scsi_transport_fc: fix kernel-doc param nameRandy Dunlap
Change function parameter name in kernel-doc to match the function's actual parameter name, to fix 2 kernel-doc warnings. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] bnx2i: convert bnx2i_dev_lock to mutexAnil Veerabhadrappa
convert bnx2i_dev_lock to type mutex from rwlock_t because cnic->register_device() can sleep for various reasons including memory allocation, waiting for ISCSI_INIT completion and while acquiring mutex lock, cnic_lock. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] bnx2i: bug fixes in bnx2i_init_one to handle error conditionsAnil Veerabhadrappa
Fixed bnx2i_init_one() to properly handle return code of cnic->register_device() and propagate it back to the caller. No need to check for BNX2I_CNIC_REGISTERED, because unless the adapter is added to adapter_list it will not be registered in ep_connect context Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] bnx2i: remove global variable bnx2i_reg_devicesAnil Veerabhadrappa
Removed bnx2i_reg_devices as this counter is not really used in a meaningful way Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] Print failed commandsMartin K. Petersen
When a request fails we print the sense data but not the actual command that failed. Add a printout of the operation + CDB for failed commands. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] scsi_dh: Reference count scsi_dh_attachChandra Seetharaman
Problem reported: http://marc.info/?l=dm-devel&m=124585978305866&w=2 scsi_dh does not do a refernce count for attach/detach, and this affects the way it is supposed to work with multipath when a device is not in the dev_list of the hardware handler. This patch adds a reference count that counts each attach. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] update scsi/constants.cDouglas Gilbert
It has been 3 years since this file was sync-ed with www.t10.org . Information taken from the last bunch of drafts released in May 2009. More asc/ascq codes are coming for thin provisioning; when approved and allocated another patch could add them prior to this patch going live. Changelog: - add some new command names and rename two commands - sync asc/ascq table with www.t10.org/lists/asc-num.txt - correct bug in scsi_extd_sense_format() [second for loop] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: check saved state before restore
2009-08-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt2sas: fix config request and diag reset deadlock [SCSI] mpt2sas: Bump driver version 01.100.04.00 [SCSI] mpt2sas: fix oops because drv data points to NULL on resume from hibernate [SCSI] mpt2sas: fix crash due to Watchdog is active while OS in standby mode [SCSI] mpt2sas: fix infinite loop inside config request [SCSI] mpt2sas: Excessive log info causes sas iounit page time out [SCSI] mpt2sas: Raid 10 Value is showing as Raid 1E in /va/log/messages [SCSI] mpt2sas: Expander fix oops saying "Already part of another port" [SCSI] mpt2sas: Introduced check for enclosure_handle to avoid crash
2009-08-21Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: add GET_PARAM/INFO support for Z pipes drm/radeon/kms: add r100/r200 OQ support. drm: Fix sysfs device confusion. drm/radeon/kms: implement the bo busy ioctl properly.
2009-08-21drm/radeon: add GET_PARAM/INFO support for Z pipesAlex Deucher
Needed for occlusion queries on rv530 chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon/kms: add r100/r200 OQ support.Dave Airlie
This adds the relocation necessary for OQ support on the r100/r200 chipsets. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm: Fix sysfs device confusion.Thomas Hellstrom
The drm sysfs class suspend / resume methods could not distinguish between different device types wich could lead to illegal type casts. Use struct device_type and make sure the class suspend / resume callbacks are aware of those. There is no per device-type suspend / resume. Only new-style PM. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon/kms: implement the bo busy ioctl properly.Dave Airlie
The previous patch assumes the ioctl already existed, when it actually didn't. It also didn't return the correct error code. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-20Merge branch 'i2c-fixes-rc6' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-fixes-rc6' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-stu300: I2C STU300 stability updates i2c-omap: Enable workaround for Errata 1.153 based on i2c-omap: ACK pending [R/X]DR and [R/X]RDY interrupts i2c-omap: Fix I2C status ACK
2009-08-20i2c-stu300: I2C STU300 stability updatesLinus Walleij
- blk clk is enabled when an irq arrives. The clk should be enabled, but just to make sure. - All error bits are handled no matter state machine state - All irq's will run complete() except for irq's that wasn't an event. - No more looking into status registers just in case an interrupt has happend and the irq handle wasn't executed. - irq_disable/enable are now separete functions. - clk settings calculation changed to round upwards instead of downwards. - Number of address send attempts before giving up is increased to 12 from 10 since it most times take 8 tries before getting through. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: Enable workaround for Errata 1.153 based onMoiz Sonasath
Silicon Errata 1.153 has been fixed on OMAP 3630|4430 with the use of a later version of I2C IP block. The errata impacts OMAP 2420|2430|3430, enable the workaround for these based on I2C IP block revision number instead of OMAP CPU type Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: ACK pending [R/X]DR and [R/X]RDY interruptsMoiz Sonasath
ACK any pending read/write interrupts before exiting the ISR either after completing the operation [ARDY interrupt] or in case of an error [NACK|AL interrupt] Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20i2c-omap: Fix I2C status ACKNishanth Menon
I2C status ack for [RX]RDR and [RX]RDY could cause race conditions of clearing the event twice and a violation of the programing sequence as defined in TRM This patch fixes the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20PCI: check saved state before restoreAlek Du
Without the check, the config space may be filled with zeros. Though the driver should try to avoid call restoring before saving, but the pci layer also should check this. Also removes the existing check in pci_restore_standard_config, since it's superfluous with the new check in restore_state. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-19Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/kms: teardown crtc correctly when fb is destroyed. drm/kms/radeon: cleanup combios TV table like DDX. drm/radeon/kms: memset the allocated framebuffer before using it. drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it. drm/radeon/kms: implement bo busy check + current domain drm/radeon/kms: cut down indirects in register accesses. drm/radeon/kms: Fix up vertical blank interrupt support. drm/radeon/kms: add rv530 R300_SU_REG_DEST + reloc for ZPASS_ADDR drm/edid: fixup detailed timings like the X server. drm/radeon/kms: Add specific rs690 authorized register table
2009-08-19drm/kms: teardown crtc correctly when fb is destroyed.Dave Airlie
If userspace destroys a framebuffer that is in use on a crtc, don't just null it out, tear down the crtc properly so the hw gets turned off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/kms/radeon: cleanup combios TV table like DDX.Dave Airlie
The fallback case wasn't getting executed properly if there was no TV table, which my T42 M7 hasn't got. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/radeon/kms: memset the allocated framebuffer before using it.Dave Airlie
This gets rid of some ugliness, we shuold probably find a way for the GPU to zero this. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it.Dave Airlie
LVDS always requests RMX_FULL, we need to fix it so that doesn't happen before we can enable LVDS on crtc 1. Signed-off-by: Dave Airlie <airlied@redhat.com>